Paper | Title | Other Keywords | Page |
---|---|---|---|
MOA01 | Operational Experience and Upgrade Plans of the RIBF Accelerator Complex | cyclotron, ion, acceleration, operation | 1 |
|
|||
The Radioactive Isotope Beam Factory (RIBF) is the cyclotron based accelerator facility for nuclear science, completed in the end of 2006. Now RIBF can provide the most intense RI beams. Continuous efforts since the first beam has increased the beam intensity and made stable operation. In 2016, 49.8 pnA (3×1011/sec) of uranium ion beam could be extracted from the final accelerator SRC with energy of 345 MeV/u. An intensity upgrade program has been proposed to increase the intensity of uranium ion by more than twenty. The program includes two subjects. First, space charge limit of the beam intensity in the low energy ring cyclotron (RRC) should be increased by replacing the existing resonators with the new one to get higher accelerating voltage. The second is skip of the first stripper, requiring a new ring cyclotron (FRC) just after the first stripper to increase the maximum magnetic rigidity so as to accept low charge state. This presentation show a conceptual design of the new cyclotron with some issues to realize the intensity upgrade. | |||
![]() |
Slides MOA01 [8.610 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
MOP03 | Developed Numerical Code Based on the Effects of Space Charge in Central Region of 10 MeV Cyclotron | space-charge, cyclotron, ion, injection | 49 |
|
|||
To study of space charge effects in 10 MeV cyclotron of Amirkabir University of Technology the C++ code is developed. This cyclotron is designed to accelerate H− up to 10MeV energy. The important components of cyclotron that effect on calculations of space charge include four sector magnets, 2 RF cavities with 71MHz frequency and internal PIG ion source. Equations of motion and effects of charged particles in electromagnetic field of accelerator are integrated in C++ code. The conventional method, 4-order Runge-Kutta, is used to solve the equations. The results of calculations show space charge effects of beam particles on each other in accelerating process. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
MOP08 | Investigation of Minimized Consumption Power about 10 MeV Cyclotron for Acceleration of Negative Hydrogen | cyclotron, ion, acceleration, radio-frequency | 64 |
|
|||
Funding: This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korean government (MSIP:Ministry of Science, ICT and Future Planning) (No. NRF-2015M2B2A8A10058096). SKKUCY-10 cyclotron with 10 MeV particle energy was designed with purpose of production about fluoro-deoxyglucose (FDG). Design strategy was maximization of accelerating voltage in order to secure the turn separa-tion. Magnet had deep valley type, RF cavity had four stems and one RF power coupler. There was internal ion source for compact design of cyclotron. Specification of cyclotron was analysed by simulating particle dynamics for central region and whole system. AVF cyclotron had 83.2 MHz of radio frequency, 1.36 T of average magnetic field, 40 kV of main accelerating voltage. Phase slip between RF and beam was less than 15 degrees, minimum turn separation was over 2 mm. Specifications of both single beam analysis of reference particle and multi-beam analysis of bunch of particles were calculated by using Cyclone v8.4 and CST-Particle studio codes. |
|||
![]() |
Poster MOP08 [4.292 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUB02 | Updated Physics Design of the DAEδALUS and IsoDAR Coupled Cyclotrons for High Intensity H2+ Beam Production | cyclotron, ion, simulation, injection | 137 |
|
|||
The Decay-At-rest Experiment for deltaCP violation At a Laboratory for Underground Science (DAEδALUS)* and the Isotope Decay-At-Rest experiment (IsoDAR)** are proposed experiments to search for CP violation in the neutrino sector, and 'sterile' neutrinos, respectively. In order to be decisive within 5 years, the neutrino flux and, consequently, the driver beam current (produced by chained cyclotrons) must be high. H2+ was chosen as primary beam ion in order to reduce the electrical current and thus space charge. This has the added advantage of allowing for stripping extraction at the exit of the DAEδALUS Superconducting Ring Cyclotron (DSRC). The primary beam current is higher than current cyclotrons have demonstrated which has led to a substantial R&D effort of our collaboration in the last years. I will present the results of this research, including tests of prototypes and highly realistic beam simulations***, which led to the latest physics-based design. The presented results suggest that it is feasible, albeit challenging, to accelerate 5 mA of H2+ to 60 MeV/amu in a compact cyclotron and boost it to 800 MeV/amu in the DSRC with clean extraction in both cases.
*The DAEδALUS collaboration, arXiv:1307.2949, 2013 **A. Bungau, et al., Phys. Rev. Lett., Bd. 109, Nr. 14, p. 141802, 2012 ***J. Yang, et al., NIM-A 704 (11), 84-91 , 2013 |
|||
![]() |
Slides TUB02 [3.248 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUB04 | Acceleration of Polarized Deuteron Beams with RIBF Cyclotrons | cyclotron, ion, acceleration, extraction | 145 |
|
|||
We have recently performed experiments with polarized deuteron beams at the Radioactive Isotope Beam Factory (RIBF). Tensor- and vector-polarized deuterons were produced using the RIKEN polarized ion source (PIS), which is an atomic-beam-type ion source equipped with an electron cyclotron resonance (ECR) ionizer, and were accelerated to 190 MeV/u, 250 MeV/u, and 300 MeV/u with a cyclotron cascade. To measure the various spin observables, the spin orientation of the deuteron beams was freely directed by using a Wien filter. The advantage of this method is that since the velocity of the deuteron is low the size of a magnet required for the spin rotation is very compact. On the other hand it is crucial to realize strict single-turn extraction for each cyclotron because the cyclotron magnetic field causes precession of the deuteron spin resulting in a deviation between its spin orientation and the beam propagation direction. This paper describes the acceleration of the polarized deuteron beams by the RIBF accelerators and the method to confirm single-turn extraction. | |||
![]() |
Slides TUB04 [13.581 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUC01 | 100 MeV H− Cyclotron Development and 800 MeV Proton Cyclotron Proposal | cyclotron, proton, ion, target | 149 |
|
|||
Since the last cyclotron conference in Vancouver, significant milestones have been achieved on the BRIF (Beijing Radioactive-Ion Beam Facility) project. On July 4, 2014 the first 100MeV proton beam was extracted from the H− compact cyclotron. The cyclotron passed beam stability test with beam current of 25 μA for about 9 hours operation. In the year of 2015, the first radioactive ion beam of K-38 was produced by the ISOL system, and the beam current on the internal target of the 100 MeV cyclotron was increased to 720 μA. In the year of 2016, the cyclotron was scheduled to provide 1000 hours beam time for proton irradiation experiment, single-particle effects study and proof-of-principle trial on the proton radiography technology. It is also planed to build a specific beam line for proton therapy demonstration on the 100 MeV machine. In this talk, I will also introduce our new proposal of an 800 MeV, room temperature separate-sector proton cyclotron, which is proposed to provide 3~4 MW proton beam for versatile applications, such as neutron and neutrino physics, proton radiography and nuclear waste treatment. | |||
![]() |
Slides TUC01 [19.352 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUP02 | Cold Cathode Ion Source for IBA CYCLONE®230 | cathode, ion, power-supply, cyclotron | 164 |
|
|||
At IBA, we use a P.I.G. floating cathode ion source for injection in the CYCLONE®230 cyclotron. The purpose of the project is to investigate how the pre-sent ion source could be replaced by a P.I.G. cold cathodes one with a longer lifetime. Experiments de-scribed in this article were done on a dedicated test setup to benchmark the different modes. A new chimney design has been developed to test cold cath-ode mode in CYCLONE®230 without any other me-chanical modifications. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUP08 | The Use of Graphene as Stripper Foils in the Siemens Eclipse Cyclotron | cyclotron, ion, target, experiment | 181 |
|
|||
This paper presents the results of an experimental study for the use of graphene foils as an extractor (stripper) foil in the 11-MeV Siemens Eclipse Cyclotron. The main advantage of graphene foils compared with carbon and graphite foils is its very high thermal conductivity. The graphene also has significant mechanical strength for atomically thin carbon layers. The life time of these foils is more than 1,8 times more in compare with specification. The graphene foils showed a significant increase in the transmission factor (the ratio of the beam current on the stripper foil to the current on the target), which was approximately 90%. The technology in fabricating these graphene foils is shown. The pros and cons of using the graphene material as a stripper foil in cyclotrons are analyzed. | |||
![]() |
Poster TUP08 [1.510 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUP11 | Developments of Ion Sources, LEBT and Injection Systems for Cyclotrons at RCNP | injection, cyclotron, ion, emittance | 190 |
|
|||
Developments of injection systems for cyclotrons at Research Center for Nuclear Physics (RCNP) Osaka University have been carried recently in order to improve the high intense ions in MeV region. The additional glazer lens on axial injection of AVF cyclotron has been installed to expand the beam accectance of cyclotron. Additional buncher for the heavy ion injection like Xe beam which requires high voltage in comparison with proton case also has been installed. Extension of baffle slits on injection line of Ring Cyclotron also has been done to extend the flexibility of injection orbit. Modification of low energy beam transport (LEBT) from ion sources to AVF injection axis including the development of fast emittance monitors also has been carried. Each component works well. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUD01 | Compact Medical Cyclotrons and their use for Radioisotope Production and Multi-disciplinary Research | cyclotron, ion, target, detector | 229 |
|
|||
Compact medical cyclotrons are conceived for radioisotope production in a hospital-based environment. Their design in terms of field shape, stability and RF is aimed at obtaining high intensity (~150 microamps) beams at kinetic energies of the order of 20 MeV. To guarantee high performances, an optimization procedure during the commissioning phase is crucial as well as a regular preventive maintenance. Beyond radioisotope production, these accelerators can be the heart of a multi-disciplinary research facility once access to the beam area and beams down to the pA range are possible. The first requirement can be achieved by means of an external beam transport line, which leads the beam to a second bunker with independent access. Currents down to the pA range can be obtained by specific ion source, RF and magnetic field tuning procedures, opening the way to nuclear and detector physics, radiation protection, radiation bio-physics and ion beam analysis developments. On the basis of the experience gained with the cyclotron at the Bern University Hospital, the accelerator physics aspects of compact medical cyclotrons will be discussed together with their scientific potential. | |||
![]() |
Slides TUD01 [15.033 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUD03 | Development of the Cyclone® Kiube: A Compact, High Performance and Self-Shielded Cyclotron for Radioisotope Production | cyclotron, ion, target, shielding | 238 |
|
|||
About 15 months ago, at IBA, we have launched the design, construction, tests and industrialization of an innovative isochronous cyclotron for PET isotope production (patent applications pending). The design has been optimized for cost effectiveness, compactness, ease of maintenance, activation reduction and high performances, with a particular emphasis on its application on market. Multiple target stations can be placed around the vacuum chamber. An innovative extraction method (patent applications pending) has been designed which allows to obtain the same extracted beam sizes and properties on the target window independent of the target position. | |||
![]() |
Slides TUD03 [2.687 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
WEA02 | Simulation of the Beam Dynamics in the Axial Injection Beam Line of FLNR JINR DC280 Cyclotron | ion, cyclotron, injection, ECR | 251 |
|
|||
DC280 is novel cyclotron which is created at the FLNR JINR. It allows to accelerate the ions of elements from Helium to Uranium with the mass to charge ratio in the range of 4 to 7.5 providing ion currents up to 10 pμA. The simulation of ion beam dynamics in the high voltage axial injection beam line of DC280 cyclotron is presented. One part of the injection system is placed at the HV platform and other part is in the grounded yoke of the DC-280 magnet. The 3D electromagnetic field maps of the focusing solenoids, analyzing magnet, accelerating tube and spherical electrostatic deflector are used during this simulation. The calculated efficiency of ion beam transportation is equal to 100% | |||
![]() |
Slides WEA02 [0.823 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THA02 | New Developments at iThemba LABS | ion, controls, cyclotron, target | 274 |
|
|||
iThemba LABS has been in operation for more than 30 years and is now at a stage at which refurbishment and ' in some cases ' replacement of the infrastructure and critical components is required. The replacement and refurbish-ment of the cooling system, which include the cooling tow-ers and chillers, the 4.4-MVA uninterruptable power sup-ply batteries and other critical components, are discussed. Progress with a facility for low-energy radioactive ion beams will be reported on. A proposal to remove radioiso-tope production from the separated sector cyclotron (SSC) and the production of the future radioisotopes with a com-mercial 70-MeV cyclotron to make more beam time avail-able for nuclear physics research with the SSC will also be discussed. Developments on our electron cyclotron reso-nance ion sources, the PIG ion source and low-level digital RF control system have also been carried out. Good pro-gress with integration of the existing control system to an EPICS control system has been made. The adoption of EtherCAT as our new industrial communication standard has enabled integration with much off-the-shelf motion, actuator and general interface hardware. | |||
![]() |
Slides THA02 [4.138 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THA03 | Development of FLNR JINR Heavy Ions Accelerator Complex (DRIBs III) | ion, cyclotron, extraction, heavy-ion | 278 |
|
|||
The cyclotrons of U-400, U-400M, and IC-100 are in operation in the Flerov Laboratory of Nuclear Reactions for implementation of scientific program and applied research. Total operation time of these accelerators is about 15000 hours per year. One of the basic scientific programs in FLNR is the synthesis of new elements that demands intensive beams of heavy ions. Now U-400 is capable to provide long-term experiments on 48Ca beam with intensity of 1 pμA. The high-intensity DC-280 cyclotron has been developed in FLNR in order to increase the 48Ca beam intensity up to 10 pμA for this task. The cyclotron U-400 has been in operation since 1978. The U-400 modernization into U-400R is planned to start after finishing DC-280 project. At the U-400M cyclotron, we plan to increase the ion energy of the extracted beam, which now is limited by 55 MeV/nucleon. The IC-100 is used in the laboratory as a specialized machine for applied research on the heavy ion beams with energies of 1 - 1.2 MeV/nucleon. | |||
![]() |
Slides THA03 [25.206 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THB02 | The Ionetix ION-12SC Compact Superconducting Cyclotron for Production of Medical Isotopes | ion, cyclotron, target, controls | 290 |
|
|||
A 12.5 MeV, 25 μA, proton compact superconducting cyclotron for medical isotope production has been produced. The machine is initially aimed at producing 13N ammonia for Positron Emission Tomography (PET) cardiology applications. With an ultra-compact size and cost-effective price point, this system offers clinicians unprecedented access to the preferred radiopharmaceutical isotope for cardiac PET imaging. A systems approach that carefully balanced the subsystem requirements coupled to precise beam dynamics calculations was followed. The system is designed to irradiate a liquid target internal to the cyclotron and to minimize the need for radiation shielding. The overall engineering, construction, commissioning, and experience at the first customer site will be described here. | |||
![]() |
Slides THB02 [2.522 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THB04 | Status of Hydrogen Ion Sources at PKU | ion, cyclotron, operation, proton | 297 |
|
|||
Funding: This work is supported by the National Basic Research Program of China No. 2014CB845502 and the National Science Foundation of China No. 91126004, 11175009 and 11305004. Cyclotrons are quite often to be used to accelerate different hydrogen ion beams with high intensity for different purposes around the World. At Peking University (PKU), special efforts were made on developing compact 2.45 GHz microwave driven ion sources with permanent magnets to generate high intensity H+, H2+, H3+ and H− ion beams as well as other ion beams. For the positive ion beam, we can easily produce a 120 mA hydrogen ion beam with H+ fraction higher than 92% with a PKU standard 2.45 GHz ECR ion source. Its diameter is about 100 mm, its hight is about 100 mm. Also we have got 40 mA H2+ beam and 20 mA H3+ beam with a specific designed 2.45 GHz ECR ion source under different operation condition. The fractions of H2+ and H3+ are higher than 50% within the mixed hydrogen ion beams for each case. Recently, a Cs-free volume H− source based on 2.45 GHz microwave was developed successfully in our lab. It can generate 45 mA H− beam with duty factor of 10% and a 29 mA beam at DC mode at 35 keV. Its operation duty factor can vary from 1% to 100% and its power efficiency is about 20 mA/kW. Details of these sources will be presented in the paper. |
|||
![]() |
Slides THB04 [4.466 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THP04 | Status of the COSY/Jülich Injector Cyclotron JULIC | cyclotron, ion, operation, experiment | 310 |
|
|||
The institute for nuclear physics IKP-4 at the Forschungszentrum Jülich operates the accelerator facility COSY with the isochronous cyclotron JULIC as the pre-accelerator, the cooler synchrotron COSY/Jülich and various experimental facilities for accelerator research and experimental hadron physics developments. The cyclotron has reached in spring 2016, since first beam in 1968, in total about 285000 hours of operation. The ongoing program at the facility foresees increasing usage as a test facility for accelerator research and detector development for realization of FAIR and other novel experiments. In parallel to the operation of COSY the cyclotron beam alone is also used for irradiation and nuclide production for fundamental research. Experience with pulsed ion sources for JULIC enables the development of a dedicated pulsed 100 keV source for protons and negative ions as a contribution to the extra low energy anti-proton synchrotron project ELENA at CERN's anti proton decelerator AD. A brief overview of the activities at the Forschungszentrum Jülich, the cooler synchrotron COSY and its injector cyclotron JULIC, with focus on recent technical developments, will be presented. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THP05 | Beam Intensity Modulation Capabilities for Varian's ProBeam® Isochronous Cyclotron | proton, operation, cyclotron, ion | 313 |
|
|||
Varian's ProBeam 250 MeV superconducting proton cyclotron is an isochronous cyclotron for radiological applications using pencil beam scanning mode and thus provides continuous beam (at its fundamental frequency of 72 MHz). In its clinical operation mode up to 800 nA of proton beam are specified and routinely extracted. Even more can be extracted in technical mode. The cold cathode Penning ion source provides enough protons to reach this current, and a layer-to-layer intensity modulation of the scanned beam is realized with an internal electrostatic deflector, which is used to vary the extracted beam current between maximum and zero. However, for research applications there is sometimes the request for higher flexibility, in particular for higher possible beam intensities and faster beam intensity modulation. In order to explore possibilities of the machine for such research modes, experimental investigations have been performed: Pulsed beams with repetition rates of up to 2 kHz and variable pulse lengths down to 4 μs as well as peak currents during pulse of up to 30 μA are in the accessible range with only changes at power supply level. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THP06 | Recent Ion Source Developments for VARIAN's ProBeam® Cyclotron | cathode, ion, cyclotron, operation | 316 |
|
|||
The cold cathode Penning ionization gauge (PIG) type proton source of the VARIANÂ’s ProBeam® 250 MeV superconducting isochronous cyclotron suffers from the usual cathode/chimney erosion during operation. Furthermore, a relatively high hydrogen gas flow is needed to generate a proton beam in the μA range, which induces conditions for RF operation below optimum. In the quest to increase cathode/chimney life time and thereby directly extend service intervals, thus reducing the total cost of ownership, several experimental investigations have been performed at a dedicated test bench at PSI, Switzerland, including material studies, a detailed operation analysis and switching to a hot cathode design. | |||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THP15 | Analysis of the Plasma Characteristics for Beam Current Optimization for TR-13 Cyclotron | plasma, ion, power-supply, extraction | 339 |
|
|||
There is a TR-13 cyclotron that extracts energy of 13 MeV protons which is located in Sungkyunkwan University. The components of the whole cyclotron are so old that cannot reproduce the situation that had been operated generally. So the researchers in this laboratory were eager to improve the technical problems of the components and finally optimize the beam profile. The finally extracted beam current is critically depends on the initially extracted beam from the ion source injection system (ISIS). The ISIS is composed of several electrical instruments. The voltage or current which is applied to these components can affect the finally extracted beam profile. However, the original values for the input voltage or current is almost fixed to special values that had been written in the operation manual. It means that the bad condition of this cyclotron cannot be matched for these values which had been conducted in the best condition of the operation. So, by using the programmable logic controller (PLC), it is possible to use varying inputs in various conditions, and the beam current is able to be stabilized much better than applying the constant input values. Finally, this paper would show the tendency of the plasma generation in terms of modulating the applying input values which occurs inside the ion source chamber. It represents the plasma characteristics that critically influence the beam current. | |||
![]() |
Poster THP15 [2.407 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THD02 | Heat Transfer Studies of the IRANCYC-10 Magnet and its Effects on the Isochronous Magnetic Field | simulation, cyclotron, ion, operation | 380 |
|
|||
In magnets for cyclotron, one of the prominent problems is difference between simulation and feasible operations. By considering more factors in simulation these differ-ence can be reduced. Thermal effect and heat transfer is one phenomenon which can change favourite features of the magnets. IRANCYC-10 is a compact AVF cyclotron which is in manufacturing phase at AmirKabir University of Technology. In IRANCYC-10 heat transfer studies have been done for RF cavity, RF transmission line and PIG ion source. In this paper, accurate simulation of heat transfer and magnetic field have been done. Also thermal effects on isochronous magnetic field for IRAN-CYC-10 is investigated. For heat transfer and CFD simu-lations, Ansys CFX and for magnetic simulation Opera 3D Tosca have been used. The initiate magnet ampere-turn in simulation is 45201 and water mass flow rate for magnet system is considered 53 lit/min. | |||
![]() |
Slides THD02 [6.831 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
FRB02 | Stable and Exotic Beams Produced at GANIL | ion, cyclotron, target, operation | 398 |
|
|||
The GANIL facility (Grand Accélérateur National dÂ’Ions Lourds) at Caen produces and accelerates stable ion beams since 1982 for nuclear physics, atomic physics, and radiobiology and material irradiation. Nowadays, an intense exotic beam is produced by the Isotope Separation On-Line method at the SPIRAL1 facility (being upgraded to extend the range of radioactive ions) or by fragmentation using LISE spectrometer. The review of the operation from 2001 to 2016 will be presented, with a focus on last year achievements and difficulties. | |||
![]() |
Slides FRB02 [7.220 MB] | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||