IPAC2019 - List of Keywords (dipole)

Paper	Title	Other Keywords	Page
MOPGW011	Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay	ISOL, ion-source, experiment, target	86
	L. Perrot, R. Ollier IPN, Orsay, France
	The Institute of Nuclear Physics at Orsay (IPN-Orsay) has always been a major player in building accelerators for nuclear physics. The ALTO facility is powered by a 50 MeV/10μA linear electron accelerator dedicated to the production of radioactive beams. The production mode is based on the photo-fission process of a thick UCx target heated up to 2000°C and using the ISOL technique. For the ionization of the released fission fragments, three ion source types can be coupled to the target: Febiad ion source, surface ion source, and laser ion source. The facility can deliver the radioactive ions beams to six different experimental set-ups. The mono-charged RIB exiting from the source must be separated using a magnetic dipole in order to select a nucleus before its transmission through electrostatic devices up to the experimental set-ups. This paper is focus on the separator which was build and exploited with success since 40 years. We propose to revisit this dipole with a precise field-map calculation and particles transport simulations. These results will be use as a first brick of the understanding and reliability of the transmission along the RIB lines at the ALTO facility.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW011
About •	paper received ※ 19 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW023	An Algorithm for Automated Lattice Design of Transfer Lines	quadrupole, lattice, focusing, target	127
	S. Reimann, M. Droba, O. Meusel, H. Podlech IAP, Frankfurt am Main, Germany
	Since the last 20 years, modern heuristic algorithms and machine learning have been increasingly used for several purposes in accelerator technology and physics. Since computing power has become less and less of a limiting factor, these tools have become part of the physicist community’s standard toolkit. This paper describes the construction of an algorithm that can be used to generate an optimised lattice design for transfer lines under the consideration of restrictions that usually limit design options in reality. The developed algorithm has been applied to the existing SIS18 to HADES transfer line in GSI.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW023
About •	paper received ※ 28 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW030	New Analytical Derivation of Group Velocity in TW Accelerating Structures	cavity, simulation, polarization, coupling	155
	M. Behtouei, M. Migliorati, L. Palumbo Sapienza University of Rome, Rome, Italy L. Faillace Universita’ degli Studi di Milano & INFN, Milano, Italy B. Spataro INFN/LNF, Frascati, Italy
	Ultra high-gradient accelerating structures are needed for the next generation of compact light sources. In the framework of the Compact Light XLS project, we are studying a high harmonic traveling-wave accelerating structure operating at a frequency of 35.982 GHz, in order to linearize the longitudinal space phase. In this paper, we propose a new analytical approach for the estimation of the group velocity in the structure and we compare it with numerical electromagnetic simulations that are carried out by using the code HFSS in the frequency domain.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW030
About •	paper received ※ 08 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW081	Measurements of Stray Magnetic Fields at CERN for CLIC	klystron, site, proton, collider	289
	C. Gohil, N. Blaskovic Kraljevic, D. Schulte CERN, Meyrin, Switzerland P. Burrows JAI, Oxford, United Kingdom B. Heilig MFGI, Budapest, Hungary
	Simulations have shown that the Compact Linear Collider (CLIC) is sensitive to external dynamic magnetic fields (stray fields) to the nT level. Magnetic fields are not typically measured to this precision at CERN. Past measurements of the background magnetic field at CERN are limited. In this paper new measurements are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW081
About •	paper received ※ 01 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW097	SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections	lattice, quadrupole, sextupole, closed-orbit	350
	A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux SOLEIL, Gif-sur-Yvette, France
	The design for the upgrade of the SOLEIL third generation light source is progressing. At the present stage, different lattices are evaluated as possible candidates for the storage ring upgrade and an important factor for the comparison of their performances is the robustness against lattice imperfections. The strategy for this study consists in defining a set of misalignments of the lattice elements and field errors of the magnets that are expected to be attained after the commissioning, applying them to the lattice models and correcting them using response matrix based techniques. A dedicated algorithm was developed in Accelerator Toolbox in order to accomplish this procedure and compare the different lattices. In this paper the results of this study at the current state are presented, including the considered lattice imperfections, the correction method applied and the final performance of the lattices.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW097
About •	paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW110	Study of the Beam Current Effects on the NSLS-II Storage Ring Optics Using Turn-by-Turn Data	lattice, optics, storage-ring, operation	375
	J. Choi, Y. Hidaka BNL, Upton, Long Island, New York, USA
	These days, the techniques using the turn-by-turn data are well developed in analyzing the accelerator optics. We compared the data for the low and high beam currents and studied the beam current effects on the storage ring lattice optics. Also, by comparing the local transfer matrices, we analyzed the amounts of the impacts on the linear optics around the ring.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW110
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW112	Design of a Bunch Compressor with CSR Suppression to Achieve Hundreds of kA Peak Current	emittance, electron, optics, site	382
	Y.C. Jing, V. Litvinenko BNL, Upton, Long Island, New York, USA V. Litvinenko Stony Brook University, Stony Brook, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. A four dipole magnetic chicane is usually used to compress electron bunch to very short in modern accelerators which requires electron beams to have high peak current. The coherent synchrotron radiation (CSR) originated from the strong bending magnets in the chicane could greatly degrade the quality of the electron beam. In this paper, we present our design for a bunch compressing system with 30 to 100 fold in bunch length reduction and at the mean time suppress the effect of CSR on the e-beam’s quality. We discuss and detail the performance of such a compressor for potential FACET-II upgrade.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW112
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP001	Optic Corrections for FCC-hh	quadrupole, injection, insertion, coupling	417
	D. Boutin CEA-DRF-IRFU, France A. Chancé, B. Dalena CEA-IRFU, Gif-sur-Yvette, France B.J. Holzer, D. Schulte CERN, Geneva, Switzerland
	The FCC-hh (Future Hadron-Hadron Circular Collider) is one of the options considered for the next generation accelerator in high-energy physics as recommended by the European Strategy Group. The evaluation of the various magnets mechanical error and field error tolerances in the arc sections of FCC-hh, as well as an estimation of the required correctors strengths, are important aspects of the collider design. In this study the mechanical tolerances, dipole and quadrupole field error tolerances for the arc sections of FCC-hh are evaluated. The consolidated correction schemes of the linear coupling (with skew quadrupoles) and of the beam tunes (with normal quadrupoles) are presented. The integration of the different ring insertions (interaction region, collimation, injection, etc) is also discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP001
About •	paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP004	Consolidated Lattice of the Collider FCC-hh	quadrupole, injection, optics, insertion	428
	A. Chancé, D. Boutin, B. Dalena CEA-IRFU, Gif-sur-Yvette, France W. Bartmann, M. Hofer, R. Martin, D. Schulte CERN, Meyrin, Switzerland
	Funding: The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant No 654305. The FCC-hh (Future Hadron-Hadron Circular Collider) is one of the options considered for the next generation accelerator in high-energy physics as recommended by the European Strategy Group. The latest changes brought to the lattice of the FCC-hh collider are commented: impact of the new intra-beam distance, efforts to increase the beam stay clear in the dispersion suppressors, tuning procedures, and updates on the insertions.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP004
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP005	Field Quality for the Hadron Option of Future Circular Collider	injection, octupole, collider, target	4397
	B. Dalena, D. Boutin CEA-IRFU, Gif-sur-Yvette, France A. Chancé CEA-DRF-IRFU, France E. Cruz Alaniz The University of Liverpool, Liverpool, United Kingdom D. Schulte CERN, Meyrin, Switzerland
	Funding: This Research and Innovation Action project submitted to call H₂020-INFRADEV-1-2014-1 receives funding from the European Union’s H₂020 Framework Program under grant agreement No. 654305. The updated field quality for the baseline design option of the Nb₃Sn dipoles for Future Circular Collider (FCC-hh) is discussed. The impact on the expected dynamic aperture is shown at injection and collision energy and the consequent non-linear correction schemes together with their integration in the optics are defined.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP005
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP013	New Nuclotron Beam Lines and Stations for Applied Researches	radiation, target, heavy-ion, diagnostics	449
	E. Syresin, A.A. Baldin, A.V. Butenko, G.A. Filatov, A.A. Slivin, G.N. Timoshenko, G.V. Trubnikov, A. Tuzikov JINR, Dubna, Moscow Region, Russia D.V. Bobrovskiy, A.I. Chumakov MEPhI, Moscow, Russia M.M. Kats, T. Kulevoy, D.A. Liakin, Y.E. Titarenko ITEP, Moscow, Russia
	New beamlines for applied researches on the Nuclotron are under development within the framework of implementation of the NICA accelerator facility. Ion beams with energies of 150-800 MeV/n extracted from the Nuclotron will be used for radiobiological researches and modeling of cosmic rays interactions with microchips. Equipment of two experimental stations is under development by the JINR-ITEP-MEPhi collaboration for these applied researches. Ion beams with the energy of 3.2 MeV/n extracted from the heavy ion linac HILAc will also be used for irradiation and testing of microchips. The specialized channel will be reconstructed for investigations in the field of relativistic nuclear power at light ion energies of 0.3-4.5 GeV/n. Three new experimental areas are organized for applied physics researches within the framework of implementation of the NICA accelerator facility.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP013
About •	paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP014	NICA Accelerator Complex at JINR	booster, collider, proton, injection	452
	E. Syresin, O.I. Brovko, A.V. Butenko, E.E. Donets, A.R. Galimov, E.V. Gorbachev, A. Govorov, V. Karpinsky, V. Kekelidze, H.G. Khodzhibagiyan, S.A. Kostromin, A.D. Kovalenko, O.S. Kozlov, I.N. Meshkov, A.V. Philippov, A.O. Sidorin, V. Slepnev, A.V. Smirnov, G.V. Trubnikov, A. Tuzikov, V. Volkov JINR, Dubna, Moscow Region, Russia
	Status of the project of NICA accelerator complex, which is under construction at JINR (Dubna, Russia), is presented. The main goal of the project is to provide ion beams for experimental studies of hot and dense baryon-ic matter and spin physics. The NICA collider will pro-vide heavy ion collisions in the energy range of √sNN=4/11 GeV at average luminosity of L=1.1027cm−2·s−1 for 197Au⁷⁹⁺ nuclei and polarized proton collisions in energy range of √sNN=12/27 GeV at lumi-nosity of L ≥ 1031cm−2·s⁻¹. NICA accelerator complex will consist of two injector chains, 578 MeV/u supercon-ducting (SC) booster synchrotron, the existing SC syn-chrotron (Nuclotron), and the new SC collider that has two storage rings each of 503 m circumference. Con-structing facility is based on Nuclotron-technology of SC magnets with iron yoke. Hollow SC cable cooled by two-phase He-flux used for operation with 10 kA currents and 1Hz cycling rate. Both stochastic and electron cooling methods are used for the beam accumulation and its stability maintenance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP014
About •	paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP023	Dynamic Aperture at Injection Energy for the HE-LHC	injection, lattice, dynamic-aperture, collider	480
	M. Hofer, M. Giovannozzi, J. Keintzel, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland L. van Riesen-Haupt JAI, Oxford, United Kingdom
	As part of the Future Circular Collider study, the High Energy LHC (HE-LHC) is a proposed hadron collider situated in the already existing LHC tunnel. It aims at achieving a center of mass energy of 27 TeV, almost doubling the design c.o.m. energy of the LHC. This increase in energy relies on the use of 16 T Nb₃Sn dipoles to be developed for the FCC-hh. The field quality of these dipoles is expected to have a big impact on the Dynamic Aperture (DA) at injection energy and subsequently tracking studies are conducted to evaluate the impact of magnetic field errors on the beam dynamics. In the following the results of these studies for the different injection energies considered for the HE-LHC are presented and a possible strategy for increasing the DA are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP023
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP026	HE-LHC Optics Design Options	lattice, quadrupole, hadron, optics	492
	J. Keintzel, M.P. Crouch, M. Hofer, T. Risselada, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland M. Hofer, J. Keintzel TU Vienna, Wien, Austria L. van Riesen-Haupt University of Oxford, Oxford, United Kingdom L. van Riesen-Haupt JAI, Oxford, United Kingdom
	The High Energy Large Hadron Collider (HE-LHC), a possible successor of the High Luminosity Large Hadron Collider (HL-LHC) aims at reaching a centre-of-mass energy of about 27 TeV using basically the same 16 T dipoles as for the hadron-hadron Future Circular Collider FCC-hh. Designing the HE-LHC results in a trade off between energy reach, beam stay clear as well as geometry offset with respect to the LHC. In order to best meet the requirements, various arc cell and dispersion suppressor options have been generated and analysed, before concluding on two baseline options, which are presented in this paper. Merits of each design are highlighted and possible solutions for beam stay clear minima are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP026
About •	paper received ※ 02 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP027	Second Order Dispersion Measurements in LHC	optics, coupling, quadrupole, betatron	496
	J. Keintzel, M. Hofer TU Vienna, Wien, Austria J.M. Coello de Portugal, J. Dilly, E. Fol, A. Garcia-Tabares, M. Hofer, J. Keintzel, E.H. Maclean, L. Malina, T.H.B. Persson, R. Tomás, A. Wegscheider CERN, Geneva, Switzerland
	The quadratic dependence of the orbit on the relative momentum offset, also known as second order dispersion, is analysed for the first time for the LHC. In this paper, the measurement and analysis procedure are described. Results and implications on future optics are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP027
About •	paper received ※ 02 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP038	Investigation of CLIC 380 GeV Post-Collision Line	simulation, site, collider, linear-collider	528
	R.M. Bodenstein, A. Abramov, S.T. Boogert, P. Burrows, L.J. Nevay JAI, Oxford, United Kingdom D. Schulte, R. Tomás CERN, Meyrin, Switzerland
	It has been proposed that the Compact Linear Collider (CLIC) be commissioned in stages, starting with a lower-energy, 380 GeV version for the first stage, and concluding with a 3 TeV version for the final stage. In the Conceptual Design Report (CDR) published in 2012, the post-collision line is described for the 3 TeV and 500 GeV stages. However, the post-collision line for the 380 GeV design was not investigated. This work will describe the simulation studies performed in BDSIM for the 380 GeV post-collision line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP038
About •	paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP039	Developments in the Experimental Interaction Regions of the High Energy LHC	luminosity, dynamic-aperture, beam-beam-effects, shielding	532
	L. van Riesen-Haupt, J.L. Abelleira University of Oxford, Oxford, United Kingdom J.L. Abelleira, E. Cruz Alaniz JAI, Oxford, United Kingdom J. Barranco García, T. Pieloni, C. Tambasco EPFL, Lausanne, Switzerland M. Hofer, J. Keintzel, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland
	Funding: Work supported by the Swiss institute for Accelerator Research and Technology , CHART. The High Energy LHC (HE-LHC) aims to collide 13.5 TeV protons in two high luminosity experiments and two low luminosity experiments. In the following, the recent updates in the two high luminosity experimental interaction regions (EIR) of the HE-LHC will be illustrated. These EIR aim to focus the beams to a β^* of 0.45 m at the interaction point (IP) to achieve a lifetime integrated luminosity of 10 ab^-1. On top of the triplet optics designed to achieve this, it will present energy deposition driven separation dipole designs, optics solutions for the matching section and dispersion suppressors as well as studies involving the integration into the lattice options. In particular it will outline geometric considerations, spurious dispersion suppression as well as results from dynamic aperture studies.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP039
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP046	Mitigation of Persistent Current Effects in the RHIC Superconducting Magnets	quadrupole, sextupole, injection, betatron	548
	C. Liu, D. Bruno, A. Marusic, M.G. Minty, P. Thieberger BNL, Upton, Long Island, New York, USA X. Wang LBNL, Berkeley, California, USA
	Funding: This work was supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. Persistent currents in superconducting magnet introduce errors in the magnetic fields especially at low operating currents. In addition, their decay cause magnetic field variations therefore drifts of beam orbits, tunes and chromaticities. To reduce field errors and suppress magnetic field variations, new magnetic cycles were proposed for low energy beam operation at RHIC. In the new magnetic cycles, the magnet current oscillates around the operating current with diminishing amplitude a few times before it settles. The new magnetic cycle has been demonstrated experimentally to reduce field errors and the amplitude of magnetic field variations significantly and is essential for the ongoing RHIC Beam Energy Scan II (BES-II) program. This article will present beam-based experimental studies of the persistent current effects with the new magnetic cycle, and discuss its application in RHIC and accelerators based on superconducting magnet in general.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP046
About •	paper received ※ 30 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP048	LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable	multipole, collider, injection, hadron	552
	P.M. McIntyre Texas A&M University, College Station, USA J. Breitschopf, J.N. Kellams, A. Sattarov ATC, College Station, Texas, USA D.C.V. Chavez Universidad de Guanajuato, División de Ciencias e Ingenierías, León, Mexico
	There is new physics-driven interest in the concept of an LHC doubler with collision energy of 30 TeV and high luminosity. The cost-driver challenge for its feasibility is the ring of 16 T dual dipoles. Recent developments in cable-in-conduit (CIC) technology offer significant benefit for this purpose. The CIC windings provide robust stress management at the cable level and facilitate forming of the flared ends without degradation. The CIC windings provide a basis for hybrid windings, in which the innermost layers that operate in high field utilize Bi-2212, the center layers utilize Nb₃Sn, and the outer layers utilize NbTi. Cryogen flows through the interior of all cables, so that heat transfer can be optimized throughout the windings. The design of the 18 T dipole and the 23 kA CIC conductor will be presented. Particular challenges for integration in an LHC doubler will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP048
About •	paper received ※ 18 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP049	6 T Cable-in-conduit Dipole to Double the Ion Energy for JLEIC	electron, collider, injection, luminosity	556
	P.M. McIntyre, J. Breitschopf, J. Gerity Texas A&M University, College Station, USA J. Breitschopf, D.C.V. Chavez, J.N. Kellams, A. Sattarov ATC, College Station, Texas, USA
	The proposed electron-ion collider JLEIC would make high-luminosity collisions of polarized ions and polarized electrons with electron energy up to 12 GeV and ion energy up to 40 GeV/u. Both the luminosity and the collision energy could be increased by doubling the dipole field in the ion ring from 3 T to 6 T, and the enhanced performance would access the full range of parameters for the physics objectives of the project. The Texas A&M group has developed the large-aperture 3 T dipoles for the baseline project, based upon a novel superconducting cable-in-conduit. (CIC). A closely similar 6 T design is being developed, utilizing a 2-layer CIC. Details of the magnet design and development of the 2-layer CIC will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP049
About •	paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB006	HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee	HOM, cavity, damping, impedance	590
	S. Gorgi Zadeh Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany R. Calaga CERN, Meyrin, Switzerland T. Flisgen FBH, Berlin, Germany U. van Rienen University of Rostock, Rostock, Germany
	The Z-pole option of FCC-ee is an Ampere class machine with a beam current of 1.39 A. Due to high HOM power and strong HOM damping requirements, the present baseline of FCC-ee considers a single cell cavity at 400 MHz. In this paper, different HOM damping schemes are compared for the Z-pole operating scenario with the aim of lowering the parasitic longitudinal and transverse impedance. The HOM power for each damping scheme is also calculated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB006
About •	paper received ※ 15 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB051	Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3	collimation, proton, hadron, collider	681
	A. Mereghetti, R. Bruce, N. Fuster-Martínez, D. Mirarchi, S. Redaelli CERN, Geneva, Switzerland
	In the framework of the High-Luminosity Large Hadron Collider project (HL-LHC), the LHC collimation system needs important upgrades to cope with the foreseen brighter beams. New collimation hardware will be installed in two phases, the first one during the LHC second Long Shutdown (LS2), in 2019-20, followed by a second phase starting in 2024 (LS3). This paper reviews the collimation upgrade plans for LS2, focused on a first impedance reduction of the system, through the installation of collimators based on new materials, and the improvement of collimation cleaning, achieved by adding new collimators in the cold dispersion suppressor regions. The performance of the new system in terms of cleaning inefficiency for proton and lead ion beams is presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB051
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB061	Simulations and Measurements of Coherent Synchrotron Radiation at the MAX-IV Short Pulse Facility	radiation, detector, simulation, electron	712
	B.S. Kyle University of Manchester, Manchester, United Kingdom R.B. Appleby UMAN, Manchester, United Kingdom M. Brandin, E. Mansten, S. Thorin MAX IV Laboratory, Lund University, Lund, Sweden T.H. Pacey STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom P.H. Williams Cockcroft Institute, Warrington, Cheshire, United Kingdom J. Wolfenden The University of Liverpool, Liverpool, United Kingdom
	The Coherent Synchrotron Radiation (CSR) interaction is a source of unwanted correlated energy spread in short-bunch Free-Electron Lasers (FEL), diluting the desired FEL spectrum and reducing the total brightness of the light source. Many accelerator codes make use of 1-dimensional approximations in the calculation of the CSR-wake, which breaks down for bunch dimensions typical within bunch compressor dipoles in FELs. General Particle Tracer simulations of the CSR interaction make use of the 3-dimensional bunch distribution, making it advantageous in modelling the short-bunch, high aspect ratio regimes typical of modern 4th-generation light sources. Measurements of THz CSR emitted from the final bunch compressor dipole of the SP02 beamline at the MAX-IV Short Pulse Facility (SPF) were used, alongside start-to-end GPT and Elegant simulations, to characterize coherent radiation emission across a broad range of bunch lengths.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB061
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB100	An Improved eRHIC Interaction Region Design Without High Field Nb₃Sn Magnets	electron, hadron, quadrupole, proton	799
	B. Parker, R.B. Palmer, H. Witte BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The IR magnets for the eRHIC Collider proposed at BNL must provide strong fields for the high momentum hadron beam and yet protect the nearby electron beam focusing channel from these fields. In our initial design the electron and hadron magnets were staggered so their respective cold masses did not overlap; however, this restricts the longitudinal space for the first hadron quadrupole and led to the challenge of making a high-field Nb₃Sn main coil structure fit inside limited radial space within an external field active shield coil. In our new layout the crossing angle increased from 22 to 25 mrad and the electron and hadron cold masses are now side-by-side. This layout allows longer magnetic lengths for reducing the coil peak fields; NbTi conductor can now be used everywhere. Of course we must take care to control magnetic cross talk between neighboring apertures. One trick we will use to accomplish this is to maximize the yoke material thickness between the beams by tapering (i.e. change coil radius as a function of longitudinal position) some of the electron coils. The new eRHIC IR layout and magnet design is reported in this paper along with ongoing R&D to wind tapered coils.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB100
About •	paper received ※ 15 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS010	Simulation of the Guide Field Flipping Procedure for the Frequency Domain Method	GUI, lattice, simulation, sextupole	858
	A.E. Aksentyev FZJ, Jülich, Germany A.E. Aksentyev MEPhI, Moscow, Russia A.E. Aksentyev, V. Senichev RAS/INR, Moscow, Russia
	The spin vector of a particle injected into a perfectly aligned storage ring precesses about the vertically-orientated guide field. In the presence of an Electric Dipole Moment (EDM), the spin precession axis acquires a proportional radial component. However, in an imperfect ring, rotational magnet misalignments induce a radial component to the spin precession axis, related to the Magnetic Dipole Moment (MDM). In the Frequency Domain Method, [] this additional precession is dealt with by consecutively injecting the beam in opposite directions, and constructing the EDM estimator as the sum of the clockwise and counter-clockwise vertical plane precession frequencies. Since the radial MDM component changes sign when the magnetic field direction is reversed, it cancels in the sum, leaving only the EDM effect. In order to reproduce the guide field magnitude with precision sufficient for the cancellation of the MDM effect, we propose to calibrate the guide field via the horizontal plane precession frequency. In the present work we describe the algorithm of the field flipping procedure, and do a numerical simulation. [] Senichev Y, Aksentev A, Ivanov A, Valetov E. Frequency domain method of the search for the deuteron electric dipole moment in a storage ring with imperfections. arXiv:171106512. 2017 Nov 17.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS010
About •	paper received ※ 08 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS011	Spin Motion Perturbation Effect on the EDM Statistic in the Frequency Domain Method	betatron, polarization, storage-ring, lattice	861
	A.E. Aksentyev FZJ, Jülich, Germany A.E. Aksentyev MEPhI, Moscow, Russia A.E. Aksentyev, V. Senichev RAS/INR, Moscow, Russia
	The spin precession axis of a particle involved in betatron motion precesses about the invariant spin axis defined on the closed orbit (CO). This precession can be observed in polarization data as a rapid, small-amplitude oscillation on top of the major effect oscillation caused by the precession of spin about the CO axis. The frequency of this latter oscillation is used in the Frequency Domain (FD) methodology as the EDM observable. [] It is estimated by fitting polarimetry data by a sine function; the rapid oscillations, therefore, constitute a model specification error. This model error might introduce a bias into the frequency estimate. In the present work we investigate the effect of the spin precession axis motion on measurement data and fit quality, and conclude that it is not only insignificant (with regard to data perturbation) compared to spin tune variation, but is also controllable via the application of a Spin Wheel. [] Senichev Y, Aksentev A, Ivanov A, Valetov E. Frequency domain method of the search for the deuteron electric dipole moment in a storage ring with imperfections. arXiv:171106512. 2017 Nov 17
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS011
About •	paper received ※ 08 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS028	Search for Electric Dipole Moments at Cosy in Jülich - Spin-Tracking Simulations Using Bmad	simulation, storage-ring, experiment, alignment	914
	V. Poncza, A. Lehrach FZJ, Jülich, Germany A. Lehrach, V. Poncza RWTH, Aachen, Germany
	The observed matter-antimatter asymmetry in the universe cannot be explained by the Standard Model (SM) of particle physics. In order to resolve the matter dominance an additional CP violating phenomenon is needed. A candidate for physics beyond the SM is a non-vanishing Electric Dipole Moment (EDM) of subatomic particles. Since permanent EDMs violate parity and time reversal symmetries, they are also CP violating if the CPT -theorem is assumed. The JEDI (Jülich Electric Dipole moment Investigations) collaboration in Jülich is preparing a direct EDM measurement of protons and deuterons first at the storage ring COSY (COoler SYnchrotron) and later at a dedicated storage ring. In order to analyse the data and to disentangle the EDM signal from systematic effects spin tracking simulations are needed. Therefore a model of COSY was implemented using the software library Bmad. It includes the measured magnet misalignments of the latest survey and a simplified description of the RF-Wien Filter device that is used for the EDM measurement. The model was successfully benchmarked using analytical predictions of the spin behavior. A crucial point regarding the data analysis is the knowledge of the orientation of the invariant spin axis with vanishing EDM at the position of the RF-Wien Filter. Especially its radial component is unknown and spin tracking simulations can be used to determine this missing number. Tracking results as well as the algorithm to find the invariant spin axis will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS028
About •	paper received ※ 25 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS043	ESS Related Activities at Elettra Sincrotrone Trieste	quadrupole, linac, target, MMI	953
	A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS045	The Betatron Equation with the Synchro-Betatron Coupling Term and Suppression of the Coupled Bunch Mode	synchrotron, betatron, coupling, closed-orbit	957
	K. Jimbo Kyoto University, Kyoto, Japan
	The synchrotron oscillation, which is both longitudinal and horizontal oscillations, occurs under a constant longitudinal velocity of revolving particle. The synchrotron and betatron equations for revolving particles are derived from the improved Hamiltonian. The betatron equation accompanys the shinchro-betatron resonant coupling term. The coherent synchrotron oscillation frequency of the bunch is defined from the integrated phase. Taking advantage of the resonant coupling term, an experiment to suppress magnetically the destabilized coupled-bunch mode of the synchrotron oscillation is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS045
About •	paper received ※ 17 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS094	Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions	vacuum, beam-losses, operation, proton	1082
	L.K. Grob, A. Apollonio, C. Charvet, E. Garcia-Tabares Valdivieso, H. Kos, R. Schmidt CERN, Geneva, Switzerland C. Neves Hochschule Furtwangen, Furtwangen, Germany
	Since in 2010 the first sub-millisecond beam losses were observed at varying locations all along the LHC, it is well known that dust can interact with high-intensity proton beams and cause significant beam losses. Initially the sudden localized losses were enigmatic and coined the phrase ’unidentified falling objects’ (UFOs), which is still widely used. These very fast beam losses have resulted in hundreds of premature beam dumps and even magnet quenches since the start of LHC. So far, the only mitigation strategy involved an optimization of dump thresholds and the beneficial conditioning effect which leads to a reduction of the UFO rate over time. To understand the physics involved in these events and to allow an active diminution, it is essential to know the chemical composition and the size of the dust particulates interacting with the protons. The exchange of a dipole magnet offered the unique opportunity to collect dust samples from inside the LHC vacuum system. They were extracted from the various components and analyzed by scanning electron microscopy and energy-dispersive X-ray spectroscopy to reveal size distribution and abundant elements. The results of this investigation will optimize the existing UFO models and the improved understanding of the phenomenon may help to prevent future performance limitations. This is also of relevance for future projects, in particular for the Future Circular Collider (FCC) under study.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS094
About •	paper received ※ 15 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP001	Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles	controls, booster, power-supply, synchrotron	1227
	C. Rodrigues, G.O. Brunheira, B.E. Limeira, G.M. Rogatto LNLS, Campinas, Brazil
	Sirius is a 4th generation synchrotron light source de-signed and being built by Brazilian Synchrotron Light Laboratory (LNLS), with first beam scheduled for 2019. Approximately thousand power supplies (PS) will be needed to feed all the magnets, being 57 to operate the booster injector. The two booster dipole PS are the most complex, not only due to their higher current (1.1 kA), voltage (800 V) and power (333 kW) output, but also because the current must follow a quasi-triangular waveform, from a value close to zero to almost the maximum in 320 ms and at a repetition rate of 2 Hz. Due to the high output values, each PS is formed by two sets in parallel of 4 modules in series, what means 8 modules with 550 A / 200 V output. In order to reduce the 2-Hz effect in the grid, each module has two main stages. The input stage has the function to regulate the average voltage in a capacitor bank consuming a constant RMS current from the grid, which value depends on of the PS average output power. The output stage has the function to transfer the energy from the capacitor bank to the load, with the output cur-rent following the reference waveform. This work describes this PS, showing its topology, some aspects of its design and obtained results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP001
About •	paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP002	Overview of Sirius Power Supply System	controls, power-supply, synchrotron, quadrupole	1230
	C. Rodrigues, G.O. Brunheira, B.E. Limeira, R.J. Marcondeli, M.G. Martins, G.R. Oliveira, A.R.D. Rodrigues, G.M. Rogatto, A.P.A. Silva, A.R. Silva, H. Sousa LNLS, Campinas, Brazil
	Sirius is a 4th generation synchrotron light source designed and under construction by Brazilian Syn-chrotron Light Laboratory (LNLS), which first beam is scheduled to operate in 2019. Almost a thousand Pow-er supplies (PS) will be needed to feed all magnets of the magnetic lattice, with outputs ranging from 10A to 1.1kA and 50W to 333kW. Almost all power supplies were designed at LNLS. Only three families of power modules were de-signed: low power (FBP), high power (FAP) and AC (FAC). Each PS can have up to 8 modules in a parallel or/and series association, in order to reach the rated output values. All PS are digitally controlled by the same hardware and firmware, also developed by LNLS, called Digital Regulation System (DRS), but with different parameter settings. The DRS is also responsible by the communi-cation with other systems, PS monitoring, data man-agement, etc. This work presents an overview of this system, showing the PS specifications, family topologies and results of tests.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP002
About •	paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP012	Power Converters for the ESS Warm Magnets: Procurement Status	linac, status, quadrupole, neutron	1251
	R. Visintini, M. Cautero, T.N. Gucin Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy C.A. Martins ESS, Lund, Sweden
	In the frame of the Italian In-Kind collaboration for the construction of the European Spallation Source (ESS), Elettra Sincrotrone Trieste research center is in charge, among all, of the provision of the power converters for the warm magnets of the superconducting part of the linear accelerator and of the proton beam transport line. The procurement process is running for all types of power converters. The first components have been delivered to ESS already in March 2018, while the Dipole and Quadrupole power converters are under construction. The first batches have been factory tested and shipped to Lund. The corrector power converters have been manufactured and are currently tested and calibrated at Elettra before their delivery to ESS.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP012
About •	paper received ※ 09 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP028	Research Progress of Power Supply System in HALS	power-supply, controls, ISOL, interface	1300
	Z.X. Shao, H. Gao, G. Liu, P. Liu, L. Wang, H.Y. Zhang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Funding: Supported by ’the Fundamental Research Funds for the Central Universities’（WK2310000064） Supported by the Hefei Advanced Light Source Pre-research Project. Hefei Advanced Light Source (HALS) is the fourth generation light source in China’s planning and construction. In order to achieve the diffraction limit of the emission and improve the beam quality, the research on magnet power supply (MPS) technology is essential. We have designed a variety of solutions for different power supplies. We designed the first version of the high stability power supply control card. The first version of the high-stability power supply control card was designed and tested with a small power module. Our pre-research system has developed a corrector magnet power supply with a small signal response bandwidth higher than 10 kHz. The developed power prototypes all use self-developed controllers, and most of the test results can meet the requirements. This article describes the progress of the HALS power supply system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP028
About •	paper received ※ 08 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP032	Design of Analog to Digital Converter Scheme for High - Precision Electromagnet Power supply	controls, FEL, hardware, experiment	1309
	M.J. Kim, Choi. Choi POSTECH, Pohang, Kyungbuk, Republic of Korea J.H. Han, S.-H. Jeong, Y.G. Jung, H.-S. Kang, D.E. Kim, H.-G. Lee, S.B. Lee, S.J. Lee, B.G. Oh, K.-H. Park, H.S. Suh PAL, Pohang, Kyungbuk, Republic of Korea M.S. Kim Dongguk University, Seoul, Republic of Korea
	This paper deals with the design of an analogue-to-digital converter (ADC) scheme for a highly precise magnet current supply (MPS). The MPSs are requires with stable and precise current specification in range of the ppm. To meet the requirements, the AD circuit is composed of parallel ADCs of low-medium resolution. Digitally, the oversampling and averaging are performed to increase both the effective resolution and the signal to noise ratio (SNR). The implemented AD circuit was improved about 18 dB (32 times oversampling). The MPS applied by the proposed ADC scheme provides more precise control and the stable current within 10 ppm at 200 A. The experiment used a dipole magnet of the PAL-XFEL and its results proved feasibility through precisely measurable DVM3458A (Keysight Co.).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP032
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP035	Design of the Vacuum System of the FCC-ee Electron-Positron Collider	collider, vacuum, photon, quadrupole	1319
	R. Kersevan, C. Garion CERN, Geneva, Switzerland
	The Future Circular Collider (FCC) Design Study includes the twin storage ring (FCC-ee) where electrons and positrons are stored and made to collide inside two detectors. The vacuum system of FCC-ee must be designed in order to deal with a lower-energy (45.6 GeV), high-current (1390 mA) Z-pole machine and at a later stage with a higher-energy (182.5 GeV) low-current (5.4 mA). The former machine is the most challenging one from the point of view of vacuum, since the photon-stimulated desorption (PSD) generated by the copious synchrotron radiation (SR) fans is quite large. While several concepts have been considered at the beginning, the design retained for the Conceptual Design Report (CDR) is one where the cross-section of the vacuum chamber (VC) in the arcs is a scaled-down version of the one implemented in the SUPERKEKB collider. Contrary to SUPERKEKB tough, the SR fans are absorbed by many short absorbers, with average spacing of 5.8 m. This allow a localization of the PSD gas load and to place lumped pumps in front of the SR absorbers, to maximize the pumping efficiency. The VC design is compatible with the design of the common-yoke dipoles and quadrupoles. The VC material is copper alloy. Optimization of the pressure profiles has been carried out by means of extensive coupled montecarlo simulations, for SR and molecular flow. For the higher energy versions of the machine, for which the SR spectra are characterized by critical energies well above the Compton edge, the localized absorbers facilitate also shielding the tunnel and any radiation-sensitive machine components from X-ray photon damage, by installing short high-Z material around the absorbers. The major features of the CDR relevant for vacuum will be highlighted in the paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP035
About •	paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW031	Elettra, Present and Future	emittance, operation, coupling, insertion-device	1468
	E. Karantzoulis, A. Carniel, S. Krecic Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	The operational status of the Italian 2.4/2.0 GeV third generation light source Elettra is presented together with the final version of the upcoming upgrade, the diffraction limited light source Elettra 2.0.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW031
About •	paper received ※ 16 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW061	First Study for an Upgrade of the ALBA Lattice	lattice, emittance, injection, optics	1544
	G. Benedetti, U. Iriso, Z. Martí, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	ALBA has started a study that will produce the design of a new lattice for a diffraction limited photon source. The baseline lattice should preserve the present circumference and energy, and keep the insertion device beamline source points as much as possible unchanged. The first solution is a 16-fold periodic ring based on a 7BA cell with dispersion bump, paired sextupoles and anti-bends. An emittance of 155 pm·rad would be reached without longitudinal gradient in the dipole magnets.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW061
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW068	New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring	radiation, lattice, storage-ring, wiggler	1557
	M. Abbaslou, M. Sedaghatizadeh KNTU, Tehran, Iran S. Dastan, J. Rahighi, F. Saeidi ILSF, Tehran, Iran
	The Iranian Light Source Facility (ILSF) is a 3 GeV 3rd synchrotron radiation laboratory in the basic design phase. The Storage Ring (SR) is based on a five-bend achromat (5BA) lattice providing low horizontal emittance of 0.27 nm.rad. Due to the ILSF storage ring, straight section limits the use of the short length wigglers for hard X-ray generation is recommended. Which are removable in the lattice. In this article, the new design of the 3-pole wiggler is investigated and the main parameters of this 3-pole wiggler, by considering the ILSF storage ring characteristics, is modified. Also, the effect of the new 3-pole wiggler on the beam dynamics is investigated and the advantages of the new design are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW068
About •	paper received ※ 28 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW070	Multi-Bend Achromat Lattice Design for the Future of TPS Upgrade	lattice, emittance, storage-ring, dynamic-aperture	1564
	M.-S. Chiu, P.J. Chou, J.C. Huang NSRRC, Hsinchu, Taiwan S.-Y. Lee Indiana University, Bloomington, Indiana, USA
	We present a TPS upgrade option with the hybrid 7BA (H7BA) lattice. We also derive a simple formula on optimal dipole angle distribution among H7BA dipoles. The agreement is satisfactory. We also report preliminary results on the dynamic aperture (DA) optimization. Possible improvement on H7BA lattice is outlined.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW070
About •	paper received ※ 24 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW080	Alternative Lattice Design for Diamond-II	lattice, emittance, sextupole, optics	1593
	M. Korostelev Oxford University, Physics Department, Oxford, Oxon, United Kingdom B. Singh DLS, Oxfordshire, United Kingdom
	Plans for upgrade of the Diamond Light Source aim to reduce beam emittance by a factor of 20 or better. This is motivated by demand for photon flux with significantly high brightness and transverse coherence. The baseline lattice design for the Diamond-II upgrade has been recently proposed, however alternative design are under investigation to reduce the emittance even further. This paper presents a new lattice design based on implementation of bending magnets with transverse field gradient only.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW080
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW084	Multi-pass ERL in a ’Dogbone’ Topology	linac, optics, cavity, focusing	1601
	S.A. Bogacz JLab, Newport News, Virginia, USA
	Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy. The main thrust of a multi-pass RLA is its very efficient usage of expensive linac structures. That efficiency can be further enhanced by configuring an RLA in a ’dogbone’ topology, which further boosts the RF efficiency by factor of two (compare to a corresponding racetrack). However, the ’dogbone’ configuration requires the beam to traverse the linac in both directions, while being accelerated. This can be facilitated by a special ’bisected’ linac Optics. Here, the quadrupole gradients scale up with momentum to maintain periodic FODO structure for the lowest energy pass in the first half of the linac and then the quadrupole strengths are mirror reflected in the second linac half. The virtue of this optics is the appearance of distinct nodes in the beta beat-wave at the ends of each pass (where the droplet arcs begin), which limits the growth of initial betas at the beginning of each subsequent droplet arc. Furthermore, ‘bisected’ linac optics naturally supports energy recovery in the ’dogbone’ topology. In this paper, we present a-proof-of-principle lattice design of a multi-pass ’dogbone’ ERL.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW084
About •	paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW091	Lattice Measurements of the APS Injector Rings	quadrupole, emittance, booster, lattice	1619
	V. Sajaev, C. Yao ANL, Argonne, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02- 06CH11357 APS Upgrade will feature an entirely new storage ring but will keep the existing injector complex consisting of the linear accelerator, Particle Accumulator Ring (PAR) and Booster. Due to small dynamic aperture of the APS Upgrade lattice, swap-out injection is adapted when an entire old bunch is replaced with a new bunch. This injection requires Booster to provide high-charge bunches with up to 17 nC in a single bunch. An extensive work is being carried out on characterizing the existing injector rings to ensure future high-charge operation. In this paper, we will present results of the lattice measurement using the response matrix fit. We will show the analysis of the achievable lattice measurement accuracy in the APS Booster and describe fit parameter modifications required to achieve good fit accuracy for the PAR.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW091
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW093	Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings by a Dispersion Bump in a Wiggler	emittance, wiggler, storage-ring, lattice	1627
	F. Sannibale, M.P. Ehrlichman, T. Hellert, S.C. Leemann, D. Robin, C. Steier, C. Sun, M. Venturini LBNL, Berkeley, California, USA
	Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231. Multi-bend achromat lattices allow for the design of extremely low emittance electron storage rings and hence for the realization of extremely high- brightness X-ray photon sources. In these new rings, the beam energy lost to radiation in the insertion devices (IDs) is often comparable to that lost in the ring dipole magnets. This implies that with respect to the typical 3rd generation light source, these new machines are more sensitive to the energy loss variations randomly occurring as the many users independently operate the gap of their IDs. The consequent induced variations in radiation damping time, equilibrium emittance, and transverse beam sizes at the radiation point sources can be significant and degrade the experimental performance in some of the beam-lines. In this paper we describe and discuss a possible method to compensate for such emittance variations by using a variable dispersion bump localized inside a fixed gap wiggler.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW093
About •	paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB006	Effect of Electrostatic Deflectors and Fringe Fields on Spin for Hadron Electric Dipole Moment Measurements on Storage Rings	storage-ring, polarization, controls, vacuum	1691
	J. Michaud, J.-M. De Conto, Y. Gómez Martínez LPSC, Grenoble Cedex, France
	The observed matter-antimatter asymmetry in the universe cannot be explained by the Standard Model. An explanation is a non-vanishing Electric Dipole Moment of subatomic particles. The JEDI (Jülich Electric Dipole moment Investigations) collaboration is preparing a direct EDM measurement of protons and deuterons first at the storage ring COSY (COoler SYnchrotron) and later at a dedicated storage ring. To achieve this, one needs a stable polarization, i.e. around 1000 seconds for spin coherence time. One source of decoherence are the electrostatic deflectors, and this must be quantified. We developed an analytical model for cylindrical deflectors, including fringe fields, and the associated beam and spin transfer functions, integrated over the deflector. All boundaries (including ground) are considered, giving a realistic, accurate field map up to any order. We get universal formulas, the only adjustable parameter being the deflector gap/radius ratio, all other terms being numerical. This has been implemented in BMAD. We present the mathematical, physical and numerical developments, as well as results for a proton storage ring.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB006
About •	paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB103	The FHI FEL Upgrade Design	FEL, undulator, cavity, operation	1903
	A.M.M. Todd AMMTodd Consulting, Princeton Junction, New Jersey, USA W.B. Colson NPS, Monterey, California, USA M. De Pas, S. Gewinner, H. Junkes, G. Meijer, W. Schöllkopf, G. von Helden FHI, Berlin, Germany S.C. Gottschalk STI Magnetics LLC, Woodinville, USA J. Rathke, T. Schultheiss AES, Medford, New York, USA L.M. Young LMY Technology, Lincolnton, Georgia, USA
	Since coming on-line in November 2013, the Fritz-Haber-Institut (FHI) der Max-Planck-Gesellschaft (MPG) Free-Electron Laser (FEL) has provided intense, tunable infrared radiation to FHI user groups. It has enabled experiments in diverse fields ranging from bio-molecular spectroscopy to studies of clusters and nanoparticles, nonlinear solid-state spectroscopy, and surface science, resulting in 50 peer-reviewed publications so far. The MPG has now funded a significant upgrade to the original FHI FEL. A second short Rayleigh range undulator FEL beamline is being added that will permit lasing from < 5 microns to > 160 microns. Additionally, a 500 MHz kicker cavity will permit simultaneous two-color operation of the FEL from both FEL beamlines over an optical range of 5 to 50 microns by deflecting alternate 1 GHz pulses into each of the two undulators. We will describe the upgraded FHI FEL physics and engineering design and present the plans for two-color FEL operations in November 2020. A.M.M. Todd, L.M. Young, J.W Rathke, W.B. Colson, T.J Schultheiss and S. Gottschalk are Consultants to the Fritz-Haber-Institut
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB103
About •	paper received ※ 02 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB105	Realizing Low-Emittance Lattice Solutions With Complex Bends	emittance, lattice, quadrupole, sextupole	1906
	V.V. Smaluk, T.V. Shaftan BNL, Upton, Long Island, New York, USA
	Funding: Department of Energy Contract No. DE-SC0012704 A concept of new lattice element called "Complex Bend" is recently proposed at NSLS-II. Replacing the regular dipoles in the Double-Bend Achromat lattice by Complex Bends significantly reduces the beam emittance. The first attempt of lattice design for potential NSLS-II upgrade based on Complex Bend, is described. Compared with the current NSLS-II lattice, the new solution modifies only three of the six girders per cell. The linear optics has been matched keeping unchanged the lattice parameters at the straight sections, where the light-generating insertion devices are located. The Complex Bend gradient is limited by 250 T/m assuming possible use of permanent magnets. The lattice provides 65 pm emittance without damping wigglers, use of which results in further decrease of the emittance
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB105
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS005	Advanced Beam Transport Solutions for ELIMAIA: A User Oriented Laser-Driven Ion Beamlines	laser, proton, quadrupole, permanent-magnet	1936
	F. Schillaci, D. Margarone, V. Scuderi ELI-BEAMS, Prague, Czech Republic L. Andò, G.A.P. Cirrone, G. Cuttone, G. Milluzzo, J. Pipek, F. Romano, A.D. Russo INFN/LNS, Catania, Italy M. Maggiore INFN/LNL, Legnaro (PD), Italy
	Laser-target acceleration represents a promising alternative to standard accelerators for several potential applications, especially medical ones, but some extreme features make laser-driven ion beams not directly usable. Therefore, a large effort has been recently devoted to development of beam-transport solutions to obtain controlled and reproducible beams. In this framework, a collaboration has been established between INFN-LNS (IT) and Eli-Beamlines-IoP (CZ) to realize a complete transport beam-line, named ELIMED, dedicated to the transport, diagnostics and dosimetry of laser-driven ion beams. The transport beamline is made by three sections: a set of high field gradient permanent magnet quadrupoles with large acceptance is used to collect and inject ions in the selection section; a magnetic chicane made of C-shaped resistive dipoles is able to select beams with high resolution and to work as an active energy modulator. The final beam shaping is done by two resistive quadrupoles. In this contribution the status of the beamline is described together with the tests performed with conventional accelerators at INFN-LNS. Feasibility study of possible upgrades are also reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS005
About •	paper received ※ 15 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS108	Numerical Simulations of RHIC FY17 Spin Flipper Experiments	simulation, resonance, experiment, polarization	2174
	P. Adams, H. Huang, J. Kewisch, C. Liu, F. Méot, P. Oddo, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, T. Roser BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Spin flipper experiments during RHIC Run 17 have demonstrated the 97% effectiveness of polarization sign reversal during stores. Zgoubi numerical simulations were setup to reproduce the experimental conditions. A very good agreement between the experimental measurements and simulation results was achieved at 23.8GeV, thus the simulations are being used to help optimize the various Spin Flipper parameters. The ultimate goal for these simulations is to serve as guidance towards a perfect flip at high energies to allow a routine Spin Flipper use during physics runs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS108
About •	paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS109	Status of AC Dipole Project at Rhic Injectors for Polarized 3He, Update	booster, resonance, vacuum, proton	2177
	K. Hock, C.W. Dawson, H. Huang, J.P. Jamilkowski, F. Méot, P. Oddo, M.C. Paniccia, Y. Tan, N. Tsoupas, J.E. Tuozzolo, K. Zeno BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. An ac dipole will be used for the efficient transport of polarized 3He in the AGS Booster as it is accelerated to \|Gγ\|=10.5. The ac dipole introduces a coherent vertical beam oscillation which allows preservation of polarization through the two intrinsic resonances Gγ=12-νy and Gγ=6+νy resonances, by full spin flipping. The AGS Booster ac dipole will be tested with protons crossing the Gγ=0+νy intrinsic resonance, which has ac dipole requirements similar to polarized 3He crossing the Gγ=12-νy resonance, providing a convenient proof of principle. This paper gives a status of the project.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS109
About •	paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS110	Scanning the AC Dipole Resonance Proximity Parameter in the AGS Booster	resonance, booster, betatron, simulation	2179
	K. Hock, H. Huang, F. Méot, P. Oddo, N. Tsoupas BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. An ac dipole system is installed in the AGS Booster in view of acceleration of polarized helion for RHIC and the eRHIC EIC. The amplitude of the vertical coherent oscillations induced by the ac dipole depends greatly on the resonance proximity parameter, δm, which is the distance between resonance tune and driving tune. Due to the non-zero momentum spread, particles with different momenta will have different value of δm. The rapid acceleration rate of the booster would cause δm to sweep, the amount of which would depend on the energy and the duration of the ac dipole cycle. These effects are simulated using zgoubi, which set a range of δm values suitable for both high spin flip efficiency and minimizing emittance growth, and the results of the simulations are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS110
About •	paper received ※ 12 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP011	Residual Orbits Estimation of the Injection Painting Bumps for CSNS	injection, MMI, neutron, operation	2326
	M.Y. Huang, S. Wang, S.Y. Xu IHEP, Beijing, People’s Republic of China
	Funding: Work supported by National Natural Science Foundation of China (Project No. U1832210) There are three bumps (one chicane bump and two painting bumps) in the injection system of the China Spallation Neutron Source (CSNS). They are the core parts of the injection system and the important guarantee that the Linac beam injecting into the rapid cycling synchrotron (RCS). During the beam commissioning, to check the effect of the residual orbits of the three bumps in the injection region was an important problem. In this paper, the residual orbits of BH and BV painting bumps were studied and estimated in the beam commissioning. The data analysis results showed that the residual orbits of BH and BV painting bumps were very small and they didn’t need to be corrected.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP011
About •	paper received ※ 01 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP019	Physical Design of HEPS Low Energy Transport Line	booster, linac, injection, lattice	2349
	Y.M. Peng, C. Meng, H.S. Xu IHEP, Beijing, People’s Republic of China
	he High Energy Photon Source (HEPS), a kilometre-scale storage ring based light source, with emittance less than 60 pm.rad, will be constructed in Beijing, China. It con-sists of a 500 MeV linac, a 500 MeV low energy transport line, a full energy booster synchrotron, two 6- GeV transport lines, a 6 GeV ultra-low emittance storage ring, and the beam line experimental stations. The low energy transport line connecting the linac and the booster. Based on the construction layout restrictions, the beam enve-lopes of the linac and the booster should be matched, and the beam produced by the linac is high efficiently trans-mitted to the booster injection point. HEPS low energy transport line has three functional sections, the achromat injection matching section, the optics matching section and the output matching section. In order to correct the error effects on the beam, 8 BPM are set in the low energy transport line. There are also 6 horizontal correctors and 6vertical correctors for beam trajectory correction. This paper will show the detailed design of HEPS low energy transport line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP019
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP034	Characterisation of SPS Slow Extraction Spill Quality Degradation	quadrupole, flattop, target, extraction	2403
	F.M. Velotti, H. Bartosik, M.C.L. Buzio, K. Cornelis, V. Di Capua, M.A. Fraser, B. Goddard, V. Kain CERN, Meyrin, Switzerland
	The main physics users of the Super Proton Synchrotron (SPS) are the experiments installed in the North Area (NA). They are supplied with slowly extracted protons or heavy ions, exploiting a third integer slow extraction to provide a 4.8 s spill. High duty cycle and constant particle flux are the main requirements. Frequent super cycle changes induce variation of the spill macro structure which directly deteriorate the final spill quality. In this paper, the source of such an effect are investigated. Results of both beam based measurements and direct magnetic measurements on the SPS reference magnets are presented. Finally, a possible strategy to counteract this effect is discussed, in order to try to remove the super cycle changes variation as cause for spill quality deterioration.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP034
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP048	Development of Spin Rotator and an Absolute Polarimeter for Polarized He-3 at BNL	polarization, solenoid, scattering, target	2440
	D. Raparia, G. Atoian, S. Ikeda, R.F. Lambiase, M. Okamura, A. Poblaguev, J. Ritter, S. Trabocchi, A. Zelenski BNL, Upton, Long Island, New York, USA R. Milner, M.M. Musgrave MIT, Cambridge, Massachusetts, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. EBIS Preinjector will provide longitudinally polarized 3He++ ions with about 80% polarization and 5.10¹¹ particles per bunch at 6 MeV, which must be rotated to vertical direction before it ions are injected into the Booster. The 3He++ longitudinal polarization is first rotated to the transverse direction by the 21.5° bending magnet. Then the solenoid spin-rotator rotates the spin to the vertical direction. The spin-rotator will be a pulsed solenoid with a reversible field to enable spin flips. The vertically polarized beam will be returned back to the straight HEBT line by the system of three dipole magnets after the spin rotator solenoid. The low-energy polarimeter can be installed in the straight beam line section after the second dipole magnet. To measure transverse (vertical) polarization of the 3He beam at 5-6 MeV, the spin correlated asymmetry of 3He scattering on a 4He gas target (~5 Torr) will be measured with left/right symmetric strip detectors. Paper will present status of the project.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP048
About •	paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP052	Proposed Hadron Injection into the Future eRHIC Collider	injection, septum, hadron, kicker	2451
	N. Tsoupas, F. Méot, C. Montag, V. Ptitsyn, D. Trbojevic, F.J. Willeke, W. Zhang BNL, Upton, Long Island, New York, USA
	Funding: Work Supported by the US Department of Energy. The future eRHIC collider will collide 5, 10, and 18 GeV polarized electrons with 250 GeV polarized protons, 210 GeV/u polarized 3He ions and other heavy ion species which are already produced by the RHIC accelerator. To increase the luminosity during collisions the number of circulating hadron bunches will increase to 330 and this requires a modification of the injection hadrons into the RHIC accelerator. This paper describes this injection scheme which is compatible with a design option which uses two hadron rings, one ring for accelerating the hadron beam and the other ring for storing the circulating beam to increase even further the integrated luminosity of the electron-hadron collisions. This two-hadron-rings option will be presented in the conference. tsoupas@bnl.gov * ICFA BD Newsletter No. 74 http://icfa-bd.kek.jp/
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP052
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW044	Study on the Influence of Beam Transverse Position on the Cavity Bunch Length Measurement	cavity, simulation, electron, laser	2578
	Q. Wang, S.M. Jiang, Q. Luo, B.G. Sun USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Funding: Work supported by National Key R&D Program of China (Grant No. 2016YFA0401900 and No. 2016YFA0401903) and The National Natural Science Foundation of China (Grant No. U1832169 and No. 11575181). Monopole modes in the resonant cavity are wildly used to obtain the beam current and the bunch length, while dipole modes are used to measure the beam transverse position. It is generally recognized that the monopole modes are independent of the beam transverse offset. In this paper, the influence of beam transverse offset on the bunch length measurement using monopole modes is analyzed. The simulation results show that the relative error of the bunch length measurement is less than 1 % when the beam offset is within 1 mm.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW044
About •	paper received ※ 25 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW080	Design of Resonant Stripline BPM for an IR-FEL Project at NSRL	FEL, electron, vacuum, emittance	2665
	X.Y. Liu, B.G. Sun USTC/NSRL, Hefei, Anhui, People’s Republic of China M. Bopp, M.M. Dehler, X.Y. Liu, A. Scherer PSI, Villigen PSI, Switzerland
	Funding: Work supported by the National Science Foundation of China (11575181, 21327901, 11705203); X. Y. Liu was supported by the China Scholarship Council for a 2-year study at PSI (Grant No. 201706340057). This paper presents the design of a 476MHz resonant stripline beam position monitor (BPM) for an IR-FEL machine at NSRL. This type of BPM was developed based on stripline BPM by moving the coupling feedthrough closer to the short end downstream. This modification introduces a resonance that gives this BPM a better capability to detect lower beam currents compared to broadband devices like button and stripline BPM. Meanwhile, the change is small enough to use the same type of electronics [1-3]. In the following sections, the basic principle, nonlinear effect, sensitivity, the filtered sum and difference signals, and the mechanical design of this BPM will be mainly discussed. Email address: xiaoyu.liu@psi.ch
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW080
About •	paper received ※ 10 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW082	The Beam Gas Vertex Profile Monitoring Station for HL-LHC	detector, target, radiation, real-time	2672
	R. Kieffer, A. Alexopoulos, L. Fosse, M. Gonzalez Berges, H. Guerin, O.R. Jones, T. Marriott-Dodington, J.W. Storey, R. Veness, S. Vlachos, B. Würkner, C. Zamantzas CERN, Meyrin, Switzerland S.M. Gibson Royal Holloway, University of London, Surrey, United Kingdom
	A new instrument is under development for the high luminosity upgrade of the Large Hadron Collider at CERN (HL-LHC) to provide non-invasive beam size measurements throughout the acceleration cycle. The Beam Gas Vertex (BGV) detector consists of a very low pressure gas target inside the beam pipe with a series of particle tracking stations located downstream. Inelastic collisions between the beam and the gas target produce secondary particles which are detected by the tracking stations. The beam size is measured from the spatial distribution of several thousand beam-gas interaction vertices, which are identified by means of the reconstructed tracks. A demonstrator device, operated over the past 3 years, has proven the feasibility of the BGV concept and has motivated development of a fully operational device for the HL-LHC. The status of current design studies for the future instrument will be presented, with particular emphasis on potential tracking detector technologies, readout schemes, and expected performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW082
About •	paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW083	Quadrated Dielectric-Filled Reentrant Cavity Resonator as a Proton Beam Position Diagnostic	cavity, pick-up, proton, simulation	2676
	S. Srinivasan, P.-A. Duperrex, J.M. Schippers PSI, Villigen PSI, Switzerland
	Funding: This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sk³odowska-Curie grant agreement No 675265 Low proton beam intensities (0.1-40 nA) are used for medical treatment of tumours at the PROSCAN facility in Paul Scherrer Institut (PSI). A cavity resonator using four quadrants operating in a dipole mode resonance has been developed to measure beam positions at these low intensities. The TM110 resonance frequency of 145.7 MHz is matched to the second harmonic of the beam pulse repetition rate (i.e.72.85 MHz). HFSS (High Frequency Structural Simulator) provides the BPM geometry and important parameters such as pickup position; dielectric dimensions etc. Comparison of test bench measurement and simulation provides good agreement. The measured position and signal sensitivity are limited by the noise, so that a position signal can be derived at beam intensities of at least 10 nA . We will discuss potential methods to increase the sensitivity. The dipole cavity resonator can be a promising candidate as a non-invasive position di-agnostic at the low proton beam intensities used in pro-ton therapy
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW083
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW091	Beam Loss Control with Scintillating Monitors at ISIS	synchrotron, operation, monitoring, neutron	2701
	B. Jones, S.A. Fisher, A. Pertica STFC/RAL/ISIS, Chilton, Didcot, Oxon, United Kingdom
	The ISIS Facility at the Rutherford Appleton Laboratory produces intense neutron and muon beams for condensed matter research. Since 1984 its 50 Hz, rapid cycling synchrotron has accelerated protons from 70 to 800 MeV and now typically delivers 0.2 MW of beam to two target stations supplying thirty-four instruments. Control and minimisation of beam loss is vital to the success of high-power proton accelerators. Coverage and sensitivity of beam loss monitoring at ISIS has recently been improved by the installation of scintillating monitors inside the synchrotron’s main dipoles. In addition to their primary goal of preventing damage to dipole RF screens, these monitors have also provided a highly sensitive tool for empirical accelerator optimisation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW091
About •	paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW112	Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique*	cyclotron, linac, detector, electron	2760
	A.C.C. Villari, D.B. Crisp, A. Lapierre, S. Nash, T. Summers, Q. Zhao NSCL, East Lansing, Michigan, USA
	Funding: * This material is based upon work supported by the National Science Foundation under Grant No. PHY15-65546. We report on a simple method to perform an absolute calibration of the magnetic beam analyser of the reaccelerator ReA3 at the National Superconducting Cyclotron Laboratory. The method is based on the time of flight between two beam stoppers 7.65 m apart. Based on two independent time-of-flight measurements at three different beam energies, the beam analyser magnet is calibrated with an accuracy of 0.12 %, corresponding to a beam energy accuracy of 0.24 %.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW112
About •	paper received ※ 25 April 2019 paper accepted ※ 28 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW123	Full Acceptance Interaction Region Design of JLEIC	electron, detector, coupling, interaction-region	2787
	V.S. Morozov, R. Ent, Y. Furletova, F. Lin, T.J. Michalski, R. Rajput-Ghoshal, M. Wiseman, R. Yoshida, Y. Zhang JLab, Newport News, Virginia, USA Y. Cai, Y.M. Nosochkov, M.K. Sullivan SLAC, Menlo Park, California, USA G.L. Sabbi LBNL, Berkeley, California, USA
	Funding: This material is based upon work supported by the U.S. DoE under Contracts No. DE-AC05-06OR23177, DE-AC02-76SF00515, and DE-AC03-76SF00098. Nuclear physics experiments envisioned at a proposed future Electron-Ion Collider (EIC) require high luminosity of 10³³-10³⁴ cm^-2s^-1 and a full-acceptance detector capable of reconstruction of a whole electron-ion collision event. Due to a large asymmetry in the electron and ion momenta in an EIC, the particles associated with the initial ion tend to go at very small angles and have small rigidity offsets with respect to the initial ion beam. They are detected after they pass through the apertures of the final focusing quadrupoles. Therefore, the apertures must be sufficiently large to provide the acceptance required by experiments. In addition, to maximize the luminosity, the final focusing quadrupoles must be placed as close to the interaction point as possible. A combination of these requirements presents serious detection, optics and engineering design challenges. We present a design of a full-acceptance interaction region of Jefferson Lab Electron-Ion Collider (JLEIC). The paper presents how this design addresses the above requirements up to an ion momentum of 200 GeV/c. We summarize the magnet parameters, which are kept consistent with the Nb-Ti superconducting magnet technology.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW123
About •	paper received ※ 23 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB069	Wakefield Suppression in a Manifold Damped and Detuned Structure for a 380 GeV CLIC Staged Design	wakefield, damping, accelerating-gradient, collider	2980
	N.Y. Joshi, R.M. Jones UMAN, Manchester, United Kingdom
	The first stage of the Compact Linear Collider (CLIC) project aims to collide electrons and positrons at a 380 GeV center of mass energy. In the baseline design the main linacs for this staged approach are required to achieve a gradient of 72 MeV/m, with the surface electromagnetic fields (EM) and the transverse long-range wakefields bound by beam dynamics constraints. The baseline design utilizes heavy damping in a traveling wave (TW) structure. Here we report on an alternate design, which adopts moderate damping along with strong detuning of the individual cell frequencies. In the context of this Damped and Detuned Structure (DDS) design, we study Gaussian and hyperbolic secant dipole distributions, together with interleaving of successive structures, to effect long-range transverse wakefield suppression. Both analytic and modal summation approaches, in the quasi-coupled approximation, produce consistent results. In the optimisation scheme we opt for a dipole frequency bandwidth of 17.7 % (2.92 GHz)
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB069
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB076	Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider	cavity, multipole, HOM, electron	2996
	S.U. De Silva, J.R. Delayen, S. Sosa ODU, Norfolk, Virginia, USA V.S. Morozov, H. Park JLab, Newport News, Virginia, USA
	The crabbing system is a key feature in the Jefferson Lab Electron-Ion Collider (JLEIC) required to increase the luminosity of the colliding bunches. A local crabbing system will be installed with superconducting rf-dipole crabbing cavities operating at 952.6 MHz. The field non-uniformity across the beam aperture in the crabbing cavities produces higher order multipole components, similar to that which are present in magnets. Knowledge of higher order mode multipole field effects is important for accurate beam dynamics study for the crabbing system. In this paper, we quantify the multipole components and analyse their effects on the beam dynamics.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB076
About •	paper received ※ 20 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB077	Simulation and Measurements of HOM Filter of the LARP Prototype RF-Dipole Crabbing Cavity Using an RF Test Box	HOM, cavity, luminosity, damping	2999
	S.U. De Silva, J.R. Delayen ODU, Norfolk, Virginia, USA Z. Li SLAC, Menlo Park, California, USA
	The RF-Dipole Crabbing Cavity designed for the LHC High Luminosity Upgrade includes two higher order mode (HOM) couplers. One of the HOM couplers is an rf filter, which is a high pass filter designed to couple to the horizontal dipole modes and accelerating modes up to 2 GHz, while rejecting the fundamental operating mode at 400 MHz. The coupler consists of a high pass filter circuit where the rejection of the operating mode and transmission of HOMs are sensitive to dimensional deviations. An rf test box has been designed to measure the transmission of the rf filter in order to qualify the fabricated HOM coupler and to tune the coupler. This paper presents the measurements of the HOM coupler with the rf test box.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB077
About •	paper received ※ 20 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS005	Long Range Beam-Beam Tune Shifts & Wire Compensation	site, beam-beam-effects, closed-orbit, quadrupole	3092
	S.R. Koscielniak TRIUMF, Vancouver, Canada
	The weak-strong model subjects the test particle in the weak beam to transverse impulses from the strong beam, resulting in betatron tune shifts. We give analytic formulae for small amplitude and asymptotic shifts for three cases: short-range, long-range, and wire compensation; and optimize the latter to minimize the non-linear tune spreads.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS005
About •	paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS018	Experimental Observation of Low-Order Collective Oscillation Modes in a Strong-Focusing Lattice	quadrupole, plasma, resonance, experiment	3130
	K. Ito, H. Higaki, H. Okamoto HU/AdSM, Higashi-Hiroshima, Japan T. Kurauchi Hiroshima University, Faculty of Science, Higashi-Hirosima, Japan
	In a conventional linear Paul trap (LPT), four electrode rods are placed symmetrically around the trap axis to generate a radio-frequency quadrupole field for transverse ion confinement. The periodic nature of the external focusing potential can give rise to serious ion losses under a specific condition. The loss mechanism is essentially the same as the coherent betatron resonance well-known in intense beam dynamics[,]. In fact, the collective motion of an ion plasma in the LPT is shown equivalent to that of a charged-particle beam traveling through an alternating-gradient focusing lattice. In the present study, we perform the direct measurement of low-order coherent oscillation modes in the LPT by detecting image currents induced on the electrodes’ surfaces. The four-rod structure of the LPT allows us to pick up feeble signals of the dipole and quadrupole oscillations of a plasma bunch. These signals are Fourier analyzed to evaluate the coherent oscillation tune at different initial ion densities. The time evolution of the coherent motion is also discussed in this paper. K. Moriya et al., Phys. Rev. Accel. Beams Vol.19, 114201 (2016). ** K. Ito et al., Phys. Rev. Accel. Beams Vol. 20, 064201 (2017).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS018
About •	paper received ※ 26 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP003	The PRORAD Beam Line Design for PRAE	electron, alignment, linac, gun	3448
	A. Faus-Golfe, B. Bai, Y. Han, C. Vallerand LAL, Orsay, France P. Duchesne, D. Marchand, E.J-M. Voutier IPN, Orsay, France
	The PRAE (Platform for Research and Applications with Electrons) accelerator is being built at Orsay campus with the main objective of creating a multidisciplinary R&D platform, involving subatomic physics, instrumentation, radiobiology and clinical research around a high-performance electron accelerator with beam energies up to 70 MeV (planned 140 MeV). In this paper we will report the optics design and beam dynamics simulations for the beam line dedicated to subatomic physics, more specifically for the measurement of the proton radius. This measurement requires extremely low energy spread (5×10−4) and small beam sizes with low divergence at three beam energies: 30, 50 and 70 MeV. The beam line includes a D-type chicane coupled to a dechirping passive structure, which generates inductive wakeﬁelds in order to get the performances required for such measurement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP003
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP017	Design and Development of the Beamline System for a Proton Therapy Facility	kicker, proton, quadrupole, optics	3488
	B. Qin, Q.S. Chen, M. Fan, K.F. Liu, X. Liu, J. Yang, Z.F. Zhao HUST, Wuhan, People’s Republic of China W.J. Han, D. Li, Z.K. Liang Huazhong University of Science and Technology, State Key Laboratory of Advanced Electromagnetic Engineering and Technology,, Hubei, People’s Republic of China
	Funding: This work was supported by The National Key Research and Development Program of China, with grant No. 2016YFC0105305; and by National Natural Science Foundation of China (11375068). A proton therapy facility with multiple treatment rooms based on superconducting cyclotron scheme is under development in HUST (Huazhong University of Science and Technology). Design features and overview of development progress for the beamline system will be presented in this paper, which mainly focuses on prototype beamline magnets, a kicker magnet for fast beam switch, and the gantry beamline using image optics.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP017
About •	paper received ※ 29 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP034	Simulating Matter Interactions of Partially Stripped Ions in BDSIM	electron, target, simulation, hadron	3514
	A. Abramov, S.T. Boogert, L.J. Nevay JAI, Egham, Surrey, United Kingdom
	Acceleration and storage of beams of relativistic partially stripped ions is more challenging than in the case of fully stripped ions because the interactions with matter, such as those with residual gas and collimators can strip electrons via ionisation. BDSIM is a code for the simulation of energy deposition and charged particle backgrounds in accelerators that uses the Geant4 physics library. Geant4 includes a broad range of ion elastic and inelastic interactions and allows the definition of partially stripped ion beams. However, no models are currently available to handle in-flight interactions involving the bound electrons. In this paper we present a semi-empirical model of beam ion stripping by material atoms that is implemented in BDSIM as an extension of Geant4’s existing physics processes and is fully integrated into a comprehensive set of matter interactions for partially stripped ions. The stripping cross-section for select cases and results from comprehensive simulations are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP034
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP050	Progress on the Optics Modeling of BMI’s Ion Rapid-Cycling Medical Synchrotron at BNL	optics, focusing, GUI, simulation	3561
	F. Méot, P.N. Joshi, N. Tsoupas BNL, Upton, Long Island, New York, USA J.P. Lidestri Best Medical International, Springfield, USA
	Funding: A project funded by Best Medical International, in the framework of a Technical Services Agreement (No. TSA-NF-18-50) with Brookhaven National Laboratory. The Brookhaven National Laboratory continues to provide technical support and guidance to Best Medical International to build and test a 60 degree magnetic arc of a rapid-cycling ion synchrotron for cancer treatment. The 60 degree magnetic sector on its guirder has undergone field measurements, including the production of partial 3D field maps. Concurrently, OPERA field map computations as well as lattice and beam dynamics simulations have been performed, aimed at both preparing and analyzing the field measurements. Contingency responses aimed at adapting to non-ideal orbit and optics have been devised. These works and their outcomes are summarized here.

Paper

Title

Other Keywords

Page

MOPGW011

Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay

ISOL, ion-source, experiment, target

86

L. Perrot, R. Ollier
IPN, Orsay, France

The Institute of Nuclear Physics at Orsay (IPN-Orsay) has always been a major player in building accelerators for nuclear physics. The ALTO facility is powered by a 50 MeV/10μA linear electron accelerator dedicated to the production of radioactive beams. The production mode is based on the photo-fission process of a thick UCx target heated up to 2000°C and using the ISOL technique. For the ionization of the released fission fragments, three ion source types can be coupled to the target: Febiad ion source, surface ion source, and laser ion source. The facility can deliver the radioactive ions beams to six different experimental set-ups. The mono-charged RIB exiting from the source must be separated using a magnetic dipole in order to select a nucleus before its transmission through electrostatic devices up to the experimental set-ups. This paper is focus on the separator which was build and exploited with success since 40 years. We propose to revisit this dipole with a precise field-map calculation and particles transport simulations. These results will be use as a first brick of the understanding and reliability of the transmission along the RIB lines at the ALTO facility.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW011

About •

paper received ※ 19 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW023

An Algorithm for Automated Lattice Design of Transfer Lines

quadrupole, lattice, focusing, target

127

S. Reimann, M. Droba, O. Meusel, H. Podlech
IAP, Frankfurt am Main, Germany

Since the last 20 years, modern heuristic algorithms and machine learning have been increasingly used for several purposes in accelerator technology and physics. Since computing power has become less and less of a limiting factor, these tools have become part of the physicist community’s standard toolkit. This paper describes the construction of an algorithm that can be used to generate an optimised lattice design for transfer lines under the consideration of restrictions that usually limit design options in reality. The developed algorithm has been applied to the existing SIS18 to HADES transfer line in GSI.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW023

About •

paper received ※ 28 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW030

New Analytical Derivation of Group Velocity in TW Accelerating Structures

cavity, simulation, polarization, coupling

155

M. Behtouei, M. Migliorati, L. Palumbo
Sapienza University of Rome, Rome, Italy
L. Faillace
Universita’ degli Studi di Milano & INFN, Milano, Italy
B. Spataro
INFN/LNF, Frascati, Italy

Ultra high-gradient accelerating structures are needed for the next generation of compact light sources. In the framework of the Compact Light XLS project, we are studying a high harmonic traveling-wave accelerating structure operating at a frequency of 35.982 GHz, in order to linearize the longitudinal space phase. In this paper, we propose a new analytical approach for the estimation of the group velocity in the structure and we compare it with numerical electromagnetic simulations that are carried out by using the code HFSS in the frequency domain.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW030

About •

paper received ※ 08 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW081

Measurements of Stray Magnetic Fields at CERN for CLIC

klystron, site, proton, collider

289

C. Gohil, N. Blaskovic Kraljevic, D. Schulte
CERN, Meyrin, Switzerland
P. Burrows
JAI, Oxford, United Kingdom
B. Heilig
MFGI, Budapest, Hungary

Simulations have shown that the Compact Linear Collider (CLIC) is sensitive to external dynamic magnetic fields (stray fields) to the nT level. Magnetic fields are not typically measured to this precision at CERN. Past measurements of the background magnetic field at CERN are limited. In this paper new measurements are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW081

About •

paper received ※ 01 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW097

SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections

lattice, quadrupole, sextupole, closed-orbit

350

A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette, France

The design for the upgrade of the SOLEIL third generation light source is progressing. At the present stage, different lattices are evaluated as possible candidates for the storage ring upgrade and an important factor for the comparison of their performances is the robustness against lattice imperfections. The strategy for this study consists in defining a set of misalignments of the lattice elements and field errors of the magnets that are expected to be attained after the commissioning, applying them to the lattice models and correcting them using response matrix based techniques. A dedicated algorithm was developed in Accelerator Toolbox in order to accomplish this procedure and compare the different lattices. In this paper the results of this study at the current state are presented, including the considered lattice imperfections, the correction method applied and the final performance of the lattices.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW097

About •

paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW110

Study of the Beam Current Effects on the NSLS-II Storage Ring Optics Using Turn-by-Turn Data

lattice, optics, storage-ring, operation

375

J. Choi, Y. Hidaka
BNL, Upton, Long Island, New York, USA

These days, the techniques using the turn-by-turn data are well developed in analyzing the accelerator optics. We compared the data for the low and high beam currents and studied the beam current effects on the storage ring lattice optics. Also, by comparing the local transfer matrices, we analyzed the amounts of the impacts on the linear optics around the ring.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW110

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW112

Design of a Bunch Compressor with CSR Suppression to Achieve Hundreds of kA Peak Current

emittance, electron, optics, site

382

Y.C. Jing, V. Litvinenko
BNL, Upton, Long Island, New York, USA
V. Litvinenko
Stony Brook University, Stony Brook, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
A four dipole magnetic chicane is usually used to compress electron bunch to very short in modern accelerators which requires electron beams to have high peak current. The coherent synchrotron radiation (CSR) originated from the strong bending magnets in the chicane could greatly degrade the quality of the electron beam. In this paper, we present our design for a bunch compressing system with 30 to 100 fold in bunch length reduction and at the mean time suppress the effect of CSR on the e-beam’s quality. We discuss and detail the performance of such a compressor for potential FACET-II upgrade.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW112

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP001

Optic Corrections for FCC-hh

quadrupole, injection, insertion, coupling

417

D. Boutin
CEA-DRF-IRFU, France
A. Chancé, B. Dalena
CEA-IRFU, Gif-sur-Yvette, France
B.J. Holzer, D. Schulte
CERN, Geneva, Switzerland

The FCC-hh (Future Hadron-Hadron Circular Collider) is one of the options considered for the next generation accelerator in high-energy physics as recommended by the European Strategy Group. The evaluation of the various magnets mechanical error and field error tolerances in the arc sections of FCC-hh, as well as an estimation of the required correctors strengths, are important aspects of the collider design. In this study the mechanical tolerances, dipole and quadrupole field error tolerances for the arc sections of FCC-hh are evaluated. The consolidated correction schemes of the linear coupling (with skew quadrupoles) and of the beam tunes (with normal quadrupoles) are presented. The integration of the different ring insertions (interaction region, collimation, injection, etc) is also discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP001

About •

paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP004

Consolidated Lattice of the Collider FCC-hh

quadrupole, injection, optics, insertion

428

A. Chancé, D. Boutin, B. Dalena
CEA-IRFU, Gif-sur-Yvette, France
W. Bartmann, M. Hofer, R. Martin, D. Schulte
CERN, Meyrin, Switzerland

Funding: The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant No 654305.
The FCC-hh (Future Hadron-Hadron Circular Collider) is one of the options considered for the next generation accelerator in high-energy physics as recommended by the European Strategy Group. The latest changes brought to the lattice of the FCC-hh collider are commented: impact of the new intra-beam distance, efforts to increase the beam stay clear in the dispersion suppressors, tuning procedures, and updates on the insertions.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP004

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP005

Field Quality for the Hadron Option of Future Circular Collider

injection, octupole, collider, target

4397

B. Dalena, D. Boutin
CEA-IRFU, Gif-sur-Yvette, France
A. Chancé
CEA-DRF-IRFU, France
E. Cruz Alaniz
The University of Liverpool, Liverpool, United Kingdom
D. Schulte
CERN, Meyrin, Switzerland

Funding: This Research and Innovation Action project submitted to call H₂020-INFRADEV-1-2014-1 receives funding from the European Union’s H₂020 Framework Program under grant agreement No. 654305.
The updated field quality for the baseline design option of the Nb₃Sn dipoles for Future Circular Collider (FCC-hh) is discussed. The impact on the expected dynamic aperture is shown at injection and collision energy and the consequent non-linear correction schemes together with their integration in the optics are defined.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP005

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP013

New Nuclotron Beam Lines and Stations for Applied Researches

radiation, target, heavy-ion, diagnostics

449

E. Syresin, A.A. Baldin, A.V. Butenko, G.A. Filatov, A.A. Slivin, G.N. Timoshenko, G.V. Trubnikov, A. Tuzikov
JINR, Dubna, Moscow Region, Russia
D.V. Bobrovskiy, A.I. Chumakov
MEPhI, Moscow, Russia
M.M. Kats, T. Kulevoy, D.A. Liakin, Y.E. Titarenko
ITEP, Moscow, Russia

New beamlines for applied researches on the Nuclotron are under development within the framework of implementation of the NICA accelerator facility. Ion beams with energies of 150-800 MeV/n extracted from the Nuclotron will be used for radiobiological researches and modeling of cosmic rays interactions with microchips. Equipment of two experimental stations is under development by the JINR-ITEP-MEPhi collaboration for these applied researches. Ion beams with the energy of 3.2 MeV/n extracted from the heavy ion linac HILAc will also be used for irradiation and testing of microchips. The specialized channel will be reconstructed for investigations in the field of relativistic nuclear power at light ion energies of 0.3-4.5 GeV/n. Three new experimental areas are organized for applied physics researches within the framework of implementation of the NICA accelerator facility.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP013

About •

paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP014

NICA Accelerator Complex at JINR

booster, collider, proton, injection

452

E. Syresin, O.I. Brovko, A.V. Butenko, E.E. Donets, A.R. Galimov, E.V. Gorbachev, A. Govorov, V. Karpinsky, V. Kekelidze, H.G. Khodzhibagiyan, S.A. Kostromin, A.D. Kovalenko, O.S. Kozlov, I.N. Meshkov, A.V. Philippov, A.O. Sidorin, V. Slepnev, A.V. Smirnov, G.V. Trubnikov, A. Tuzikov, V. Volkov
JINR, Dubna, Moscow Region, Russia

Status of the project of NICA accelerator complex, which is under construction at JINR (Dubna, Russia), is presented. The main goal of the project is to provide ion beams for experimental studies of hot and dense baryon-ic matter and spin physics. The NICA collider will pro-vide heavy ion collisions in the energy range of √sNN=4/11 GeV at average luminosity of L=1.1027cm−2·s−1 for 197Au⁷⁹⁺ nuclei and polarized proton collisions in energy range of √sNN=12/27 GeV at lumi-nosity of L ≥ 1031cm−2·s⁻¹. NICA accelerator complex will consist of two injector chains, 578 MeV/u supercon-ducting (SC) booster synchrotron, the existing SC syn-chrotron (Nuclotron), and the new SC collider that has two storage rings each of 503 m circumference. Con-structing facility is based on Nuclotron-technology of SC magnets with iron yoke. Hollow SC cable cooled by two-phase He-flux used for operation with 10 kA currents and 1Hz cycling rate. Both stochastic and electron cooling methods are used for the beam accumulation and its stability maintenance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP014

About •

paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP023

Dynamic Aperture at Injection Energy for the HE-LHC

injection, lattice, dynamic-aperture, collider

480

M. Hofer, M. Giovannozzi, J. Keintzel, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland
L. van Riesen-Haupt
JAI, Oxford, United Kingdom

As part of the Future Circular Collider study, the High Energy LHC (HE-LHC) is a proposed hadron collider situated in the already existing LHC tunnel. It aims at achieving a center of mass energy of 27 TeV, almost doubling the design c.o.m. energy of the LHC. This increase in energy relies on the use of 16 T Nb₃Sn dipoles to be developed for the FCC-hh. The field quality of these dipoles is expected to have a big impact on the Dynamic Aperture (DA) at injection energy and subsequently tracking studies are conducted to evaluate the impact of magnetic field errors on the beam dynamics. In the following the results of these studies for the different injection energies considered for the HE-LHC are presented and a possible strategy for increasing the DA are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP023

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP026

HE-LHC Optics Design Options

lattice, quadrupole, hadron, optics

492

J. Keintzel, M.P. Crouch, M. Hofer, T. Risselada, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland
M. Hofer, J. Keintzel
TU Vienna, Wien, Austria
L. van Riesen-Haupt
University of Oxford, Oxford, United Kingdom
L. van Riesen-Haupt
JAI, Oxford, United Kingdom

The High Energy Large Hadron Collider (HE-LHC), a possible successor of the High Luminosity Large Hadron Collider (HL-LHC) aims at reaching a centre-of-mass energy of about 27 TeV using basically the same 16 T dipoles as for the hadron-hadron Future Circular Collider FCC-hh. Designing the HE-LHC results in a trade off between energy reach, beam stay clear as well as geometry offset with respect to the LHC. In order to best meet the requirements, various arc cell and dispersion suppressor options have been generated and analysed, before concluding on two baseline options, which are presented in this paper. Merits of each design are highlighted and possible solutions for beam stay clear minima are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP026

About •

paper received ※ 02 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP027

Second Order Dispersion Measurements in LHC

optics, coupling, quadrupole, betatron

496

J. Keintzel, M. Hofer
TU Vienna, Wien, Austria
J.M. Coello de Portugal, J. Dilly, E. Fol, A. Garcia-Tabares, M. Hofer, J. Keintzel, E.H. Maclean, L. Malina, T.H.B. Persson, R. Tomás, A. Wegscheider
CERN, Geneva, Switzerland

The quadratic dependence of the orbit on the relative momentum offset, also known as second order dispersion, is analysed for the first time for the LHC. In this paper, the measurement and analysis procedure are described. Results and implications on future optics are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP027

About •

paper received ※ 02 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP038

Investigation of CLIC 380 GeV Post-Collision Line

simulation, site, collider, linear-collider

528

R.M. Bodenstein, A. Abramov, S.T. Boogert, P. Burrows, L.J. Nevay
JAI, Oxford, United Kingdom
D. Schulte, R. Tomás
CERN, Meyrin, Switzerland

It has been proposed that the Compact Linear Collider (CLIC) be commissioned in stages, starting with a lower-energy, 380 GeV version for the first stage, and concluding with a 3 TeV version for the final stage. In the Conceptual Design Report (CDR) published in 2012, the post-collision line is described for the 3 TeV and 500 GeV stages. However, the post-collision line for the 380 GeV design was not investigated. This work will describe the simulation studies performed in BDSIM for the 380 GeV post-collision line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP038

About •

paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP039

Developments in the Experimental Interaction Regions of the High Energy LHC

luminosity, dynamic-aperture, beam-beam-effects, shielding

532

L. van Riesen-Haupt, J.L. Abelleira
University of Oxford, Oxford, United Kingdom
J.L. Abelleira, E. Cruz Alaniz
JAI, Oxford, United Kingdom
J. Barranco García, T. Pieloni, C. Tambasco
EPFL, Lausanne, Switzerland
M. Hofer, J. Keintzel, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland

Funding: Work supported by the Swiss institute for Accelerator Research and Technology , CHART.
The High Energy LHC (HE-LHC) aims to collide 13.5 TeV protons in two high luminosity experiments and two low luminosity experiments. In the following, the recent updates in the two high luminosity experimental interaction regions (EIR) of the HE-LHC will be illustrated. These EIR aim to focus the beams to a β^* of 0.45 m at the interaction point (IP) to achieve a lifetime integrated luminosity of 10 ab^-1. On top of the triplet optics designed to achieve this, it will present energy deposition driven separation dipole designs, optics solutions for the matching section and dispersion suppressors as well as studies involving the integration into the lattice options. In particular it will outline geometric considerations, spurious dispersion suppression as well as results from dynamic aperture studies.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP039

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP046

Mitigation of Persistent Current Effects in the RHIC Superconducting Magnets

quadrupole, sextupole, injection, betatron

548

C. Liu, D. Bruno, A. Marusic, M.G. Minty, P. Thieberger
BNL, Upton, Long Island, New York, USA
X. Wang
LBNL, Berkeley, California, USA

Funding: This work was supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
Persistent currents in superconducting magnet introduce errors in the magnetic fields especially at low operating currents. In addition, their decay cause magnetic field variations therefore drifts of beam orbits, tunes and chromaticities. To reduce field errors and suppress magnetic field variations, new magnetic cycles were proposed for low energy beam operation at RHIC. In the new magnetic cycles, the magnet current oscillates around the operating current with diminishing amplitude a few times before it settles. The new magnetic cycle has been demonstrated experimentally to reduce field errors and the amplitude of magnetic field variations significantly and is essential for the ongoing RHIC Beam Energy Scan II (BES-II) program. This article will present beam-based experimental studies of the persistent current effects with the new magnetic cycle, and discuss its application in RHIC and accelerators based on superconducting magnet in general.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP046

About •

paper received ※ 30 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP048

LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable

multipole, collider, injection, hadron

552

P.M. McIntyre
Texas A&M University, College Station, USA
J. Breitschopf, J.N. Kellams, A. Sattarov
ATC, College Station, Texas, USA
D.C.V. Chavez
Universidad de Guanajuato, División de Ciencias e Ingenierías, León, Mexico

There is new physics-driven interest in the concept of an LHC doubler with collision energy of 30 TeV and high luminosity. The cost-driver challenge for its feasibility is the ring of 16 T dual dipoles. Recent developments in cable-in-conduit (CIC) technology offer significant benefit for this purpose. The CIC windings provide robust stress management at the cable level and facilitate forming of the flared ends without degradation. The CIC windings provide a basis for hybrid windings, in which the innermost layers that operate in high field utilize Bi-2212, the center layers utilize Nb₃Sn, and the outer layers utilize NbTi. Cryogen flows through the interior of all cables, so that heat transfer can be optimized throughout the windings. The design of the 18 T dipole and the 23 kA CIC conductor will be presented. Particular challenges for integration in an LHC doubler will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP048

About •

paper received ※ 18 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP049

6 T Cable-in-conduit Dipole to Double the Ion Energy for JLEIC

electron, collider, injection, luminosity

556

P.M. McIntyre, J. Breitschopf, J. Gerity
Texas A&M University, College Station, USA
J. Breitschopf, D.C.V. Chavez, J.N. Kellams, A. Sattarov
ATC, College Station, Texas, USA

The proposed electron-ion collider JLEIC would make high-luminosity collisions of polarized ions and polarized electrons with electron energy up to 12 GeV and ion energy up to 40 GeV/u. Both the luminosity and the collision energy could be increased by doubling the dipole field in the ion ring from 3 T to 6 T, and the enhanced performance would access the full range of parameters for the physics objectives of the project. The Texas A&M group has developed the large-aperture 3 T dipoles for the baseline project, based upon a novel superconducting cable-in-conduit. (CIC). A closely similar 6 T design is being developed, utilizing a 2-layer CIC. Details of the magnet design and development of the 2-layer CIC will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP049

About •

paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB006

HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee

HOM, cavity, damping, impedance

590

S. Gorgi Zadeh
Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany
R. Calaga
CERN, Meyrin, Switzerland
T. Flisgen
FBH, Berlin, Germany
U. van Rienen
University of Rostock, Rostock, Germany

The Z-pole option of FCC-ee is an Ampere class machine with a beam current of 1.39 A. Due to high HOM power and strong HOM damping requirements, the present baseline of FCC-ee considers a single cell cavity at 400 MHz. In this paper, different HOM damping schemes are compared for the Z-pole operating scenario with the aim of lowering the parasitic longitudinal and transverse impedance. The HOM power for each damping scheme is also calculated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB006

About •

paper received ※ 15 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB051

Collimation System Upgrades for the High Luminosity Large Hadron Collider and Expected Cleaning Performance in Run 3

collimation, proton, hadron, collider

681

A. Mereghetti, R. Bruce, N. Fuster-Martínez, D. Mirarchi, S. Redaelli
CERN, Geneva, Switzerland

In the framework of the High-Luminosity Large Hadron Collider project (HL-LHC), the LHC collimation system needs important upgrades to cope with the foreseen brighter beams. New collimation hardware will be installed in two phases, the first one during the LHC second Long Shutdown (LS2), in 2019-20, followed by a second phase starting in 2024 (LS3). This paper reviews the collimation upgrade plans for LS2, focused on a first impedance reduction of the system, through the installation of collimators based on new materials, and the improvement of collimation cleaning, achieved by adding new collimators in the cold dispersion suppressor regions. The performance of the new system in terms of cleaning inefficiency for proton and lead ion beams is presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB051

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB061

Simulations and Measurements of Coherent Synchrotron Radiation at the MAX-IV Short Pulse Facility

radiation, detector, simulation, electron

712

B.S. Kyle
University of Manchester, Manchester, United Kingdom
R.B. Appleby
UMAN, Manchester, United Kingdom
M. Brandin, E. Mansten, S. Thorin
MAX IV Laboratory, Lund University, Lund, Sweden
T.H. Pacey
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
P.H. Williams
Cockcroft Institute, Warrington, Cheshire, United Kingdom
J. Wolfenden
The University of Liverpool, Liverpool, United Kingdom

The Coherent Synchrotron Radiation (CSR) interaction is a source of unwanted correlated energy spread in short-bunch Free-Electron Lasers (FEL), diluting the desired FEL spectrum and reducing the total brightness of the light source. Many accelerator codes make use of 1-dimensional approximations in the calculation of the CSR-wake, which breaks down for bunch dimensions typical within bunch compressor dipoles in FELs. General Particle Tracer simulations of the CSR interaction make use of the 3-dimensional bunch distribution, making it advantageous in modelling the short-bunch, high aspect ratio regimes typical of modern 4th-generation light sources. Measurements of THz CSR emitted from the final bunch compressor dipole of the SP02 beamline at the MAX-IV Short Pulse Facility (SPF) were used, alongside start-to-end GPT and Elegant simulations, to characterize coherent radiation emission across a broad range of bunch lengths.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB061

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB100

An Improved eRHIC Interaction Region Design Without High Field Nb₃Sn Magnets

electron, hadron, quadrupole, proton

799

B. Parker, R.B. Palmer, H. Witte
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The IR magnets for the eRHIC Collider proposed at BNL must provide strong fields for the high momentum hadron beam and yet protect the nearby electron beam focusing channel from these fields. In our initial design the electron and hadron magnets were staggered so their respective cold masses did not overlap; however, this restricts the longitudinal space for the first hadron quadrupole and led to the challenge of making a high-field Nb₃Sn main coil structure fit inside limited radial space within an external field active shield coil. In our new layout the crossing angle increased from 22 to 25 mrad and the electron and hadron cold masses are now side-by-side. This layout allows longer magnetic lengths for reducing the coil peak fields; NbTi conductor can now be used everywhere. Of course we must take care to control magnetic cross talk between neighboring apertures. One trick we will use to accomplish this is to maximize the yoke material thickness between the beams by tapering (i.e. change coil radius as a function of longitudinal position) some of the electron coils. The new eRHIC IR layout and magnet design is reported in this paper along with ongoing R&D to wind tapered coils.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB100

About •

paper received ※ 15 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS010

Simulation of the Guide Field Flipping Procedure for the Frequency Domain Method

GUI, lattice, simulation, sextupole

858

A.E. Aksentyev
FZJ, Jülich, Germany
A.E. Aksentyev
MEPhI, Moscow, Russia
A.E. Aksentyev, V. Senichev
RAS/INR, Moscow, Russia

The spin vector of a particle injected into a perfectly aligned storage ring precesses about the vertically-orientated guide field. In the presence of an Electric Dipole Moment (EDM), the spin precession axis acquires a proportional radial component. However, in an imperfect ring, rotational magnet misalignments induce a radial component to the spin precession axis, related to the Magnetic Dipole Moment (MDM). In the Frequency Domain Method, [*] this additional precession is dealt with by consecutively injecting the beam in opposite directions, and constructing the EDM estimator as the sum of the clockwise and counter-clockwise vertical plane precession frequencies. Since the radial MDM component changes sign when the magnetic field direction is reversed, it cancels in the sum, leaving only the EDM effect. In order to reproduce the guide field magnitude with precision sufficient for the cancellation of the MDM effect, we propose to calibrate the guide field via the horizontal plane precession frequency. In the present work we describe the algorithm of the field flipping procedure, and do a numerical simulation.
[*] Senichev Y, Aksentev A, Ivanov A, Valetov E. Frequency domain method of the search for the deuteron electric dipole moment in a storage ring with imperfections. arXiv:171106512. 2017 Nov 17.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS010

About •

paper received ※ 08 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS011

Spin Motion Perturbation Effect on the EDM Statistic in the Frequency Domain Method

betatron, polarization, storage-ring, lattice

861

A.E. Aksentyev
FZJ, Jülich, Germany
A.E. Aksentyev
MEPhI, Moscow, Russia
A.E. Aksentyev, V. Senichev
RAS/INR, Moscow, Russia

The spin precession axis of a particle involved in betatron motion precesses about the invariant spin axis defined on the closed orbit (CO). This precession can be observed in polarization data as a rapid, small-amplitude oscillation on top of the major effect oscillation caused by the precession of spin about the CO axis. The frequency of this latter oscillation is used in the Frequency Domain (FD) methodology as the EDM observable. [*] It is estimated by fitting polarimetry data by a sine function; the rapid oscillations, therefore, constitute a model specification error. This model error might introduce a bias into the frequency estimate. In the present work we investigate the effect of the spin precession axis motion on measurement data and fit quality, and conclude that it is not only insignificant (with regard to data perturbation) compared to spin tune variation, but is also controllable via the application of a Spin Wheel.
[*] Senichev Y, Aksentev A, Ivanov A, Valetov E. Frequency domain method of the search for the deuteron electric dipole moment in a storage ring with imperfections. arXiv:171106512. 2017 Nov 17

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS011

About •

paper received ※ 08 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS028

Search for Electric Dipole Moments at Cosy in Jülich - Spin-Tracking Simulations Using Bmad

simulation, storage-ring, experiment, alignment

914

V. Poncza, A. Lehrach
FZJ, Jülich, Germany
A. Lehrach, V. Poncza
RWTH, Aachen, Germany

The observed matter-antimatter asymmetry in the universe cannot be explained by the Standard Model (SM) of particle physics. In order to resolve the matter dominance an additional CP violating phenomenon is needed. A candidate for physics beyond the SM is a non-vanishing Electric Dipole Moment (EDM) of subatomic particles. Since permanent EDMs violate parity and time reversal symmetries, they are also CP violating if the CPT -theorem is assumed. The JEDI (Jülich Electric Dipole moment Investigations) collaboration in Jülich is preparing a direct EDM measurement of protons and deuterons first at the storage ring COSY (COoler SYnchrotron) and later at a dedicated storage ring. In order to analyse the data and to disentangle the EDM signal from systematic effects spin tracking simulations are needed. Therefore a model of COSY was implemented using the software library Bmad. It includes the measured magnet misalignments of the latest survey and a simplified description of the RF-Wien Filter device that is used for the EDM measurement. The model was successfully benchmarked using analytical predictions of the spin behavior. A crucial point regarding the data analysis is the knowledge of the orientation of the invariant spin axis with vanishing EDM at the position of the RF-Wien Filter. Especially its radial component is unknown and spin tracking simulations can be used to determine this missing number. Tracking results as well as the algorithm to find the invariant spin axis will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS028

About •

paper received ※ 25 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS043

ESS Related Activities at Elettra Sincrotrone Trieste

quadrupole, linac, target, MMI

953

A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS045

The Betatron Equation with the Synchro-Betatron Coupling Term and Suppression of the Coupled Bunch Mode

synchrotron, betatron, coupling, closed-orbit

957

K. Jimbo
Kyoto University, Kyoto, Japan

The synchrotron oscillation, which is both longitudinal and horizontal oscillations, occurs under a constant longitudinal velocity of revolving particle. The synchrotron and betatron equations for revolving particles are derived from the improved Hamiltonian. The betatron equation accompanys the shinchro-betatron resonant coupling term. The coherent synchrotron oscillation frequency of the bunch is defined from the integrated phase. Taking advantage of the resonant coupling term, an experiment to suppress magnetically the destabilized coupled-bunch mode of the synchrotron oscillation is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS045

About •

paper received ※ 17 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS094

Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions

vacuum, beam-losses, operation, proton

1082

L.K. Grob, A. Apollonio, C. Charvet, E. Garcia-Tabares Valdivieso, H. Kos, R. Schmidt
CERN, Geneva, Switzerland
C. Neves
Hochschule Furtwangen, Furtwangen, Germany

Since in 2010 the first sub-millisecond beam losses were observed at varying locations all along the LHC, it is well known that dust can interact with high-intensity proton beams and cause significant beam losses. Initially the sudden localized losses were enigmatic and coined the phrase ’unidentified falling objects’ (UFOs), which is still widely used. These very fast beam losses have resulted in hundreds of premature beam dumps and even magnet quenches since the start of LHC. So far, the only mitigation strategy involved an optimization of dump thresholds and the beneficial conditioning effect which leads to a reduction of the UFO rate over time. To understand the physics involved in these events and to allow an active diminution, it is essential to know the chemical composition and the size of the dust particulates interacting with the protons. The exchange of a dipole magnet offered the unique opportunity to collect dust samples from inside the LHC vacuum system. They were extracted from the various components and analyzed by scanning electron microscopy and energy-dispersive X-ray spectroscopy to reveal size distribution and abundant elements. The results of this investigation will optimize the existing UFO models and the improved understanding of the phenomenon may help to prevent future performance limitations. This is also of relevance for future projects, in particular for the Future Circular Collider (FCC) under study.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS094

About •

paper received ※ 15 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP001

Design and Experimental Results of a 1.1kA/800V AC Power Supply for Sirius Booster Dipoles

controls, booster, power-supply, synchrotron

1227

C. Rodrigues, G.O. Brunheira, B.E. Limeira, G.M. Rogatto
LNLS, Campinas, Brazil

Sirius is a 4th generation synchrotron light source de-signed and being built by Brazilian Synchrotron Light Laboratory (LNLS), with first beam scheduled for 2019. Approximately thousand power supplies (PS) will be needed to feed all the magnets, being 57 to operate the booster injector. The two booster dipole PS are the most complex, not only due to their higher current (1.1 kA), voltage (800 V) and power (333 kW) output, but also because the current must follow a quasi-triangular waveform, from a value close to zero to almost the maximum in 320 ms and at a repetition rate of 2 Hz. Due to the high output values, each PS is formed by two sets in parallel of 4 modules in series, what means 8 modules with 550 A / 200 V output. In order to reduce the 2-Hz effect in the grid, each module has two main stages. The input stage has the function to regulate the average voltage in a capacitor bank consuming a constant RMS current from the grid, which value depends on of the PS average output power. The output stage has the function to transfer the energy from the capacitor bank to the load, with the output cur-rent following the reference waveform. This work describes this PS, showing its topology, some aspects of its design and obtained results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP001

About •

paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP002

Overview of Sirius Power Supply System

controls, power-supply, synchrotron, quadrupole

1230

C. Rodrigues, G.O. Brunheira, B.E. Limeira, R.J. Marcondeli, M.G. Martins, G.R. Oliveira, A.R.D. Rodrigues, G.M. Rogatto, A.P.A. Silva, A.R. Silva, H. Sousa
LNLS, Campinas, Brazil

Sirius is a 4th generation synchrotron light source designed and under construction by Brazilian Syn-chrotron Light Laboratory (LNLS), which first beam is scheduled to operate in 2019. Almost a thousand Pow-er supplies (PS) will be needed to feed all magnets of the magnetic lattice, with outputs ranging from 10A to 1.1kA and 50W to 333kW. Almost all power supplies were designed at LNLS. Only three families of power modules were de-signed: low power (FBP), high power (FAP) and AC (FAC). Each PS can have up to 8 modules in a parallel or/and series association, in order to reach the rated output values. All PS are digitally controlled by the same hardware and firmware, also developed by LNLS, called Digital Regulation System (DRS), but with different parameter settings. The DRS is also responsible by the communi-cation with other systems, PS monitoring, data man-agement, etc. This work presents an overview of this system, showing the PS specifications, family topologies and results of tests.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP002

About •

paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP012

Power Converters for the ESS Warm Magnets: Procurement Status

linac, status, quadrupole, neutron

1251

R. Visintini, M. Cautero, T.N. Gucin
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
C.A. Martins
ESS, Lund, Sweden

In the frame of the Italian In-Kind collaboration for the construction of the European Spallation Source (ESS), Elettra Sincrotrone Trieste research center is in charge, among all, of the provision of the power converters for the warm magnets of the superconducting part of the linear accelerator and of the proton beam transport line. The procurement process is running for all types of power converters. The first components have been delivered to ESS already in March 2018, while the Dipole and Quadrupole power converters are under construction. The first batches have been factory tested and shipped to Lund. The corrector power converters have been manufactured and are currently tested and calibrated at Elettra before their delivery to ESS.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP012

About •

paper received ※ 09 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP028

Research Progress of Power Supply System in HALS

power-supply, controls, ISOL, interface

1300

Z.X. Shao, H. Gao, G. Liu, P. Liu, L. Wang, H.Y. Zhang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Funding: Supported by ’the Fundamental Research Funds for the Central Universities’（WK2310000064） Supported by the Hefei Advanced Light Source Pre-research Project.
Hefei Advanced Light Source (HALS) is the fourth generation light source in China’s planning and construction. In order to achieve the diffraction limit of the emission and improve the beam quality, the research on magnet power supply (MPS) technology is essential. We have designed a variety of solutions for different power supplies. We designed the first version of the high stability power supply control card. The first version of the high-stability power supply control card was designed and tested with a small power module. Our pre-research system has developed a corrector magnet power supply with a small signal response bandwidth higher than 10 kHz. The developed power prototypes all use self-developed controllers, and most of the test results can meet the requirements. This article describes the progress of the HALS power supply system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP028

About •

paper received ※ 08 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP032

Design of Analog to Digital Converter Scheme for High - Precision Electromagnet Power supply

controls, FEL, hardware, experiment

1309

M.J. Kim, Choi. Choi
POSTECH, Pohang, Kyungbuk, Republic of Korea
J.H. Han, S.-H. Jeong, Y.G. Jung, H.-S. Kang, D.E. Kim, H.-G. Lee, S.B. Lee, S.J. Lee, B.G. Oh, K.-H. Park, H.S. Suh
PAL, Pohang, Kyungbuk, Republic of Korea
M.S. Kim
Dongguk University, Seoul, Republic of Korea

This paper deals with the design of an analogue-to-digital converter (ADC) scheme for a highly precise magnet current supply (MPS). The MPSs are requires with stable and precise current specification in range of the ppm. To meet the requirements, the AD circuit is composed of parallel ADCs of low-medium resolution. Digitally, the oversampling and averaging are performed to increase both the effective resolution and the signal to noise ratio (SNR). The implemented AD circuit was improved about 18 dB (32 times oversampling). The MPS applied by the proposed ADC scheme provides more precise control and the stable current within 10 ppm at 200 A. The experiment used a dipole magnet of the PAL-XFEL and its results proved feasibility through precisely measurable DVM3458A (Keysight Co.).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP032

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMP035

Design of the Vacuum System of the FCC-ee Electron-Positron Collider

collider, vacuum, photon, quadrupole

1319

R. Kersevan, C. Garion
CERN, Geneva, Switzerland

The Future Circular Collider (FCC) Design Study includes the twin storage ring (FCC-ee) where electrons and positrons are stored and made to collide inside two detectors. The vacuum system of FCC-ee must be designed in order to deal with a lower-energy (45.6 GeV), high-current (1390 mA) Z-pole machine and at a later stage with a higher-energy (182.5 GeV) low-current (5.4 mA). The former machine is the most challenging one from the point of view of vacuum, since the photon-stimulated desorption (PSD) generated by the copious synchrotron radiation (SR) fans is quite large. While several concepts have been considered at the beginning, the design retained for the Conceptual Design Report (CDR) is one where the cross-section of the vacuum chamber (VC) in the arcs is a scaled-down version of the one implemented in the SUPERKEKB collider. Contrary to SUPERKEKB tough, the SR fans are absorbed by many short absorbers, with average spacing of 5.8 m. This allow a localization of the PSD gas load and to place lumped pumps in front of the SR absorbers, to maximize the pumping efficiency. The VC design is compatible with the design of the common-yoke dipoles and quadrupoles. The VC material is copper alloy. Optimization of the pressure profiles has been carried out by means of extensive coupled montecarlo simulations, for SR and molecular flow. For the higher energy versions of the machine, for which the SR spectra are characterized by critical energies well above the Compton edge, the localized absorbers facilitate also shielding the tunnel and any radiation-sensitive machine components from X-ray photon damage, by installing short high-Z material around the absorbers. The major features of the CDR relevant for vacuum will be highlighted in the paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP035

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW031

Elettra, Present and Future

emittance, operation, coupling, insertion-device

1468

E. Karantzoulis, A. Carniel, S. Krecic
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

The operational status of the Italian 2.4/2.0 GeV third generation light source Elettra is presented together with the final version of the upcoming upgrade, the diffraction limited light source Elettra 2.0.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW031

About •

paper received ※ 16 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW061

First Study for an Upgrade of the ALBA Lattice

lattice, emittance, injection, optics

1544

G. Benedetti, U. Iriso, Z. Martí, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

ALBA has started a study that will produce the design of a new lattice for a diffraction limited photon source. The baseline lattice should preserve the present circumference and energy, and keep the insertion device beamline source points as much as possible unchanged. The first solution is a 16-fold periodic ring based on a 7BA cell with dispersion bump, paired sextupoles and anti-bends. An emittance of 155 pm·rad would be reached without longitudinal gradient in the dipole magnets.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW061

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW068

New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring

radiation, lattice, storage-ring, wiggler

1557

M. Abbaslou, M. Sedaghatizadeh
KNTU, Tehran, Iran
S. Dastan, J. Rahighi, F. Saeidi
ILSF, Tehran, Iran

The Iranian Light Source Facility (ILSF) is a 3 GeV 3rd synchrotron radiation laboratory in the basic design phase. The Storage Ring (SR) is based on a five-bend achromat (5BA) lattice providing low horizontal emittance of 0.27 nm.rad. Due to the ILSF storage ring, straight section limits the use of the short length wigglers for hard X-ray generation is recommended. Which are removable in the lattice. In this article, the new design of the 3-pole wiggler is investigated and the main parameters of this 3-pole wiggler, by considering the ILSF storage ring characteristics, is modified. Also, the effect of the new 3-pole wiggler on the beam dynamics is investigated and the advantages of the new design are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW068

About •

paper received ※ 28 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW070

Multi-Bend Achromat Lattice Design for the Future of TPS Upgrade

lattice, emittance, storage-ring, dynamic-aperture

1564

M.-S. Chiu, P.J. Chou, J.C. Huang
NSRRC, Hsinchu, Taiwan
S.-Y. Lee
Indiana University, Bloomington, Indiana, USA

We present a TPS upgrade option with the hybrid 7BA (H7BA) lattice. We also derive a simple formula on optimal dipole angle distribution among H7BA dipoles. The agreement is satisfactory. We also report preliminary results on the dynamic aperture (DA) optimization. Possible improvement on H7BA lattice is outlined.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW070

About •

paper received ※ 24 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW080

Alternative Lattice Design for Diamond-II

lattice, emittance, sextupole, optics

1593

M. Korostelev
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
B. Singh
DLS, Oxfordshire, United Kingdom

Plans for upgrade of the Diamond Light Source aim to reduce beam emittance by a factor of 20 or better. This is motivated by demand for photon flux with significantly high brightness and transverse coherence. The baseline lattice design for the Diamond-II upgrade has been recently proposed, however alternative design are under investigation to reduce the emittance even further. This paper presents a new lattice design based on implementation of bending magnets with transverse field gradient only.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW080

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW084

Multi-pass ERL in a ’Dogbone’ Topology

linac, optics, cavity, focusing

1601

S.A. Bogacz
JLab, Newport News, Virginia, USA

Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy.
The main thrust of a multi-pass RLA is its very efficient usage of expensive linac structures. That efficiency can be further enhanced by configuring an RLA in a ’dogbone’ topology, which further boosts the RF efficiency by factor of two (compare to a corresponding racetrack). However, the ’dogbone’ configuration requires the beam to traverse the linac in both directions, while being accelerated. This can be facilitated by a special ’bisected’ linac Optics. Here, the quadrupole gradients scale up with momentum to maintain periodic FODO structure for the lowest energy pass in the first half of the linac and then the quadrupole strengths are mirror reflected in the second linac half. The virtue of this optics is the appearance of distinct nodes in the beta beat-wave at the ends of each pass (where the droplet arcs begin), which limits the growth of initial betas at the beginning of each subsequent droplet arc. Furthermore, ‘bisected’ linac optics naturally supports energy recovery in the ’dogbone’ topology. In this paper, we present a-proof-of-principle lattice design of a multi-pass ’dogbone’ ERL.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW084

About •

paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW091

Lattice Measurements of the APS Injector Rings

quadrupole, emittance, booster, lattice

1619

V. Sajaev, C. Yao
ANL, Argonne, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02- 06CH11357
APS Upgrade will feature an entirely new storage ring but will keep the existing injector complex consisting of the linear accelerator, Particle Accumulator Ring (PAR) and Booster. Due to small dynamic aperture of the APS Upgrade lattice, swap-out injection is adapted when an entire old bunch is replaced with a new bunch. This injection requires Booster to provide high-charge bunches with up to 17 nC in a single bunch. An extensive work is being carried out on characterizing the existing injector rings to ensure future high-charge operation. In this paper, we will present results of the lattice measurement using the response matrix fit. We will show the analysis of the achievable lattice measurement accuracy in the APS Booster and describe fit parameter modifications required to achieve good fit accuracy for the PAR.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW091

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW093

Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings by a Dispersion Bump in a Wiggler

emittance, wiggler, storage-ring, lattice

1627

F. Sannibale, M.P. Ehrlichman, T. Hellert, S.C. Leemann, D. Robin, C. Steier, C. Sun, M. Venturini
LBNL, Berkeley, California, USA

Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231.
Multi-bend achromat lattices allow for the design of extremely low emittance electron storage rings and hence for the realization of extremely high- brightness X-ray photon sources. In these new rings, the beam energy lost to radiation in the insertion devices (IDs) is often comparable to that lost in the ring dipole magnets. This implies that with respect to the typical 3rd generation light source, these new machines are more sensitive to the energy loss variations randomly occurring as the many users independently operate the gap of their IDs. The consequent induced variations in radiation damping time, equilibrium emittance, and transverse beam sizes at the radiation point sources can be significant and degrade the experimental performance in some of the beam-lines. In this paper we describe and discuss a possible method to compensate for such emittance variations by using a variable dispersion bump localized inside a fixed gap wiggler.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW093

About •

paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB006

Effect of Electrostatic Deflectors and Fringe Fields on Spin for Hadron Electric Dipole Moment Measurements on Storage Rings

storage-ring, polarization, controls, vacuum

1691

J. Michaud, J.-M. De Conto, Y. Gómez Martínez
LPSC, Grenoble Cedex, France

The observed matter-antimatter asymmetry in the universe cannot be explained by the Standard Model. An explanation is a non-vanishing Electric Dipole Moment of subatomic particles. The JEDI (Jülich Electric Dipole moment Investigations) collaboration is preparing a direct EDM measurement of protons and deuterons first at the storage ring COSY (COoler SYnchrotron) and later at a dedicated storage ring. To achieve this, one needs a stable polarization, i.e. around 1000 seconds for spin coherence time. One source of decoherence are the electrostatic deflectors, and this must be quantified. We developed an analytical model for cylindrical deflectors, including fringe fields, and the associated beam and spin transfer functions, integrated over the deflector. All boundaries (including ground) are considered, giving a realistic, accurate field map up to any order. We get universal formulas, the only adjustable parameter being the deflector gap/radius ratio, all other terms being numerical. This has been implemented in BMAD. We present the mathematical, physical and numerical developments, as well as results for a proton storage ring.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB006

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB103

The FHI FEL Upgrade Design

FEL, undulator, cavity, operation

1903

A.M.M. Todd
AMMTodd Consulting, Princeton Junction, New Jersey, USA
W.B. Colson
NPS, Monterey, California, USA
M. De Pas, S. Gewinner, H. Junkes, G. Meijer, W. Schöllkopf, G. von Helden
FHI, Berlin, Germany
S.C. Gottschalk
STI Magnetics LLC, Woodinville, USA
J. Rathke, T. Schultheiss
AES, Medford, New York, USA
L.M. Young
LMY Technology, Lincolnton, Georgia, USA

Since coming on-line in November 2013, the Fritz-Haber-Institut (FHI) der Max-Planck-Gesellschaft (MPG) Free-Electron Laser (FEL) has provided intense, tunable infrared radiation to FHI user groups. It has enabled experiments in diverse fields ranging from bio-molecular spectroscopy to studies of clusters and nanoparticles, nonlinear solid-state spectroscopy, and surface science, resulting in 50 peer-reviewed publications so far. The MPG has now funded a significant upgrade to the original FHI FEL. A second short Rayleigh range undulator FEL beamline is being added that will permit lasing from < 5 microns to > 160 microns. Additionally, a 500 MHz kicker cavity will permit simultaneous two-color operation of the FEL from both FEL beamlines over an optical range of 5 to 50 microns by deflecting alternate 1 GHz pulses into each of the two undulators. We will describe the upgraded FHI FEL physics and engineering design and present the plans for two-color FEL operations in November 2020.
A.M.M. Todd, L.M. Young, J.W Rathke, W.B. Colson, T.J Schultheiss and S. Gottschalk are Consultants to the Fritz-Haber-Institut

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB103

About •

paper received ※ 02 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB105

Realizing Low-Emittance Lattice Solutions With Complex Bends

emittance, lattice, quadrupole, sextupole

1906

V.V. Smaluk, T.V. Shaftan
BNL, Upton, Long Island, New York, USA

Funding: Department of Energy Contract No. DE-SC0012704
A concept of new lattice element called "Complex Bend" is recently proposed at NSLS-II. Replacing the regular dipoles in the Double-Bend Achromat lattice by Complex Bends significantly reduces the beam emittance. The first attempt of lattice design for potential NSLS-II upgrade based on Complex Bend, is described. Compared with the current NSLS-II lattice, the new solution modifies only three of the six girders per cell. The linear optics has been matched keeping unchanged the lattice parameters at the straight sections, where the light-generating insertion devices are located. The Complex Bend gradient is limited by 250 T/m assuming possible use of permanent magnets. The lattice provides 65 pm emittance without damping wigglers, use of which results in further decrease of the emittance

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB105

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS005

Advanced Beam Transport Solutions for ELIMAIA: A User Oriented Laser-Driven Ion Beamlines

laser, proton, quadrupole, permanent-magnet

1936

F. Schillaci, D. Margarone, V. Scuderi
ELI-BEAMS, Prague, Czech Republic
L. Andò, G.A.P. Cirrone, G. Cuttone, G. Milluzzo, J. Pipek, F. Romano, A.D. Russo
INFN/LNS, Catania, Italy
M. Maggiore
INFN/LNL, Legnaro (PD), Italy

Laser-target acceleration represents a promising alternative to standard accelerators for several potential applications, especially medical ones, but some extreme features make laser-driven ion beams not directly usable. Therefore, a large effort has been recently devoted to development of beam-transport solutions to obtain controlled and reproducible beams. In this framework, a collaboration has been established between INFN-LNS (IT) and Eli-Beamlines-IoP (CZ) to realize a complete transport beam-line, named ELIMED, dedicated to the transport, diagnostics and dosimetry of laser-driven ion beams. The transport beamline is made by three sections: a set of high field gradient permanent magnet quadrupoles with large acceptance is used to collect and inject ions in the selection section; a magnetic chicane made of C-shaped resistive dipoles is able to select beams with high resolution and to work as an active energy modulator. The final beam shaping is done by two resistive quadrupoles. In this contribution the status of the beamline is described together with the tests performed with conventional accelerators at INFN-LNS. Feasibility study of possible upgrades are also reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS005

About •

paper received ※ 15 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS108

Numerical Simulations of RHIC FY17 Spin Flipper Experiments

simulation, resonance, experiment, polarization

2174

P. Adams, H. Huang, J. Kewisch, C. Liu, F. Méot, P. Oddo, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, T. Roser
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Spin flipper experiments during RHIC Run 17 have demonstrated the 97% effectiveness of polarization sign reversal during stores. Zgoubi numerical simulations were setup to reproduce the experimental conditions. A very good agreement between the experimental measurements and simulation results was achieved at 23.8GeV, thus the simulations are being used to help optimize the various Spin Flipper parameters. The ultimate goal for these simulations is to serve as guidance towards a perfect flip at high energies to allow a routine Spin Flipper use during physics runs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS108

About •

paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS109

Status of AC Dipole Project at Rhic Injectors for Polarized 3He, Update

booster, resonance, vacuum, proton

2177

K. Hock, C.W. Dawson, H. Huang, J.P. Jamilkowski, F. Méot, P. Oddo, M.C. Paniccia, Y. Tan, N. Tsoupas, J.E. Tuozzolo, K. Zeno
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
An ac dipole will be used for the efficient transport of polarized 3He in the AGS Booster as it is accelerated to |Gγ|=10.5. The ac dipole introduces a coherent vertical beam oscillation which allows preservation of polarization through the two intrinsic resonances Gγ=12-νy and Gγ=6+νy resonances, by full spin flipping. The AGS Booster ac dipole will be tested with protons crossing the Gγ=0+νy intrinsic resonance, which has ac dipole requirements similar to polarized 3He crossing the Gγ=12-νy resonance, providing a convenient proof of principle. This paper gives a status of the project.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS109

About •

paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS110

Scanning the AC Dipole Resonance Proximity Parameter in the AGS Booster

resonance, booster, betatron, simulation

2179

K. Hock, H. Huang, F. Méot, P. Oddo, N. Tsoupas
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
An ac dipole system is installed in the AGS Booster in view of acceleration of polarized helion for RHIC and the eRHIC EIC. The amplitude of the vertical coherent oscillations induced by the ac dipole depends greatly on the resonance proximity parameter, δm, which is the distance between resonance tune and driving tune. Due to the non-zero momentum spread, particles with different momenta will have different value of δm. The rapid acceleration rate of the booster would cause δm to sweep, the amount of which would depend on the energy and the duration of the ac dipole cycle. These effects are simulated using zgoubi, which set a range of δm values suitable for both high spin flip efficiency and minimizing emittance growth, and the results of the simulations are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS110

About •

paper received ※ 12 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP011

Residual Orbits Estimation of the Injection Painting Bumps for CSNS

injection, MMI, neutron, operation

2326

M.Y. Huang, S. Wang, S.Y. Xu
IHEP, Beijing, People’s Republic of China

Funding: Work supported by National Natural Science Foundation of China (Project No. U1832210)
There are three bumps (one chicane bump and two painting bumps) in the injection system of the China Spallation Neutron Source (CSNS). They are the core parts of the injection system and the important guarantee that the Linac beam injecting into the rapid cycling synchrotron (RCS). During the beam commissioning, to check the effect of the residual orbits of the three bumps in the injection region was an important problem. In this paper, the residual orbits of BH and BV painting bumps were studied and estimated in the beam commissioning. The data analysis results showed that the residual orbits of BH and BV painting bumps were very small and they didn’t need to be corrected.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP011

About •

paper received ※ 01 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP019

Physical Design of HEPS Low Energy Transport Line

booster, linac, injection, lattice

2349

Y.M. Peng, C. Meng, H.S. Xu
IHEP, Beijing, People’s Republic of China

he High Energy Photon Source (HEPS), a kilometre-scale storage ring based light source, with emittance less than 60 pm.rad, will be constructed in Beijing, China. It con-sists of a 500 MeV linac, a 500 MeV low energy transport line, a full energy booster synchrotron, two 6- GeV transport lines, a 6 GeV ultra-low emittance storage ring, and the beam line experimental stations. The low energy transport line connecting the linac and the booster. Based on the construction layout restrictions, the beam enve-lopes of the linac and the booster should be matched, and the beam produced by the linac is high efficiently trans-mitted to the booster injection point. HEPS low energy transport line has three functional sections, the achromat injection matching section, the optics matching section and the output matching section. In order to correct the error effects on the beam, 8 BPM are set in the low energy transport line. There are also 6 horizontal correctors and 6vertical correctors for beam trajectory correction. This paper will show the detailed design of HEPS low energy transport line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP019

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP034

Characterisation of SPS Slow Extraction Spill Quality Degradation

quadrupole, flattop, target, extraction

2403

F.M. Velotti, H. Bartosik, M.C.L. Buzio, K. Cornelis, V. Di Capua, M.A. Fraser, B. Goddard, V. Kain
CERN, Meyrin, Switzerland

The main physics users of the Super Proton Synchrotron (SPS) are the experiments installed in the North Area (NA). They are supplied with slowly extracted protons or heavy ions, exploiting a third integer slow extraction to provide a 4.8 s spill. High duty cycle and constant particle flux are the main requirements. Frequent super cycle changes induce variation of the spill macro structure which directly deteriorate the final spill quality. In this paper, the source of such an effect are investigated. Results of both beam based measurements and direct magnetic measurements on the SPS reference magnets are presented. Finally, a possible strategy to counteract this effect is discussed, in order to try to remove the super cycle changes variation as cause for spill quality deterioration.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP034

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP048

Development of Spin Rotator and an Absolute Polarimeter for Polarized He-3 at BNL

polarization, solenoid, scattering, target

2440

D. Raparia, G. Atoian, S. Ikeda, R.F. Lambiase, M. Okamura, A. Poblaguev, J. Ritter, S. Trabocchi, A. Zelenski
BNL, Upton, Long Island, New York, USA
R. Milner, M.M. Musgrave
MIT, Cambridge, Massachusetts, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
EBIS Preinjector will provide longitudinally polarized 3He++ ions with about 80% polarization and 5.10¹¹ particles per bunch at 6 MeV, which must be rotated to vertical direction before it ions are injected into the Booster. The 3He++ longitudinal polarization is first rotated to the transverse direction by the 21.5° bending magnet. Then the solenoid spin-rotator rotates the spin to the vertical direction. The spin-rotator will be a pulsed solenoid with a reversible field to enable spin flips. The vertically polarized beam will be returned back to the straight HEBT line by the system of three dipole magnets after the spin rotator solenoid. The low-energy polarimeter can be installed in the straight beam line section after the second dipole magnet. To measure transverse (vertical) polarization of the 3He beam at 5-6 MeV, the spin correlated asymmetry of 3He scattering on a 4He gas target (~5 Torr) will be measured with left/right symmetric strip detectors. Paper will present status of the project.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP048

About •

paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP052

Proposed Hadron Injection into the Future eRHIC Collider

injection, septum, hadron, kicker

2451

N. Tsoupas, F. Méot, C. Montag, V. Ptitsyn, D. Trbojevic, F.J. Willeke, W. Zhang
BNL, Upton, Long Island, New York, USA

Funding: *Work Supported by the US Department of Energy.
The future eRHIC collider * will collide 5, 10, and 18 GeV polarized electrons with 250 GeV polarized protons, 210 GeV/u polarized 3He ions and other heavy ion species which are already produced by the RHIC accelerator. To increase the luminosity during collisions the number of circulating hadron bunches will increase to 330 and this requires a modification of the injection hadrons into the RHIC accelerator. This paper describes this injection scheme which is compatible with a design option which uses two hadron rings, one ring for accelerating the hadron beam and the other ring for storing the circulating beam to increase even further the integrated luminosity of the electron-hadron collisions. This two-hadron-rings option will be presented in the conference.
tsoupas@bnl.gov
* ICFA BD Newsletter No. 74 http://icfa-bd.kek.jp/

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP052

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW044

Study on the Influence of Beam Transverse Position on the Cavity Bunch Length Measurement

cavity, simulation, electron, laser

2578

Q. Wang, S.M. Jiang, Q. Luo, B.G. Sun
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Funding: Work supported by National Key R&D Program of China (Grant No. 2016YFA0401900 and No. 2016YFA0401903) and The National Natural Science Foundation of China (Grant No. U1832169 and No. 11575181).
Monopole modes in the resonant cavity are wildly used to obtain the beam current and the bunch length, while dipole modes are used to measure the beam transverse position. It is generally recognized that the monopole modes are independent of the beam transverse offset. In this paper, the influence of beam transverse offset on the bunch length measurement using monopole modes is analyzed. The simulation results show that the relative error of the bunch length measurement is less than 1 % when the beam offset is within 1 mm.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW044

About •

paper received ※ 25 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW080

Design of Resonant Stripline BPM for an IR-FEL Project at NSRL

FEL, electron, vacuum, emittance

2665

X.Y. Liu, B.G. Sun
USTC/NSRL, Hefei, Anhui, People’s Republic of China
M. Bopp, M.M. Dehler, X.Y. Liu, A. Scherer
PSI, Villigen PSI, Switzerland

Funding: Work supported by the National Science Foundation of China (11575181, 21327901, 11705203); X. Y. Liu was supported by the China Scholarship Council for a 2-year study at PSI (Grant No. 201706340057).
This paper presents the design of a 476MHz resonant stripline beam position monitor (BPM) for an IR-FEL machine at NSRL. This type of BPM was developed based on stripline BPM by moving the coupling feedthrough closer to the short end downstream. This modification introduces a resonance that gives this BPM a better capability to detect lower beam currents compared to broadband devices like button and stripline BPM. Meanwhile, the change is small enough to use the same type of electronics [1-3]. In the following sections, the basic principle, nonlinear effect, sensitivity, the filtered sum and difference signals, and the mechanical design of this BPM will be mainly discussed.
Email address: xiaoyu.liu@psi.ch

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW080

About •

paper received ※ 10 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW082

The Beam Gas Vertex Profile Monitoring Station for HL-LHC

detector, target, radiation, real-time

2672

R. Kieffer, A. Alexopoulos, L. Fosse, M. Gonzalez Berges, H. Guerin, O.R. Jones, T. Marriott-Dodington, J.W. Storey, R. Veness, S. Vlachos, B. Würkner, C. Zamantzas
CERN, Meyrin, Switzerland
S.M. Gibson
Royal Holloway, University of London, Surrey, United Kingdom

A new instrument is under development for the high luminosity upgrade of the Large Hadron Collider at CERN (HL-LHC) to provide non-invasive beam size measurements throughout the acceleration cycle. The Beam Gas Vertex (BGV) detector consists of a very low pressure gas target inside the beam pipe with a series of particle tracking stations located downstream. Inelastic collisions between the beam and the gas target produce secondary particles which are detected by the tracking stations. The beam size is measured from the spatial distribution of several thousand beam-gas interaction vertices, which are identified by means of the reconstructed tracks. A demonstrator device, operated over the past 3 years, has proven the feasibility of the BGV concept and has motivated development of a fully operational device for the HL-LHC. The status of current design studies for the future instrument will be presented, with particular emphasis on potential tracking detector technologies, readout schemes, and expected performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW082

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW083

Quadrated Dielectric-Filled Reentrant Cavity Resonator as a Proton Beam Position Diagnostic

cavity, pick-up, proton, simulation

2676

S. Srinivasan, P.-A. Duperrex, J.M. Schippers
PSI, Villigen PSI, Switzerland

Funding: This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sk³odowska-Curie grant agreement No 675265
Low proton beam intensities (0.1-40 nA) are used for medical treatment of tumours at the PROSCAN facility in Paul Scherrer Institut (PSI). A cavity resonator using four quadrants operating in a dipole mode resonance has been developed to measure beam positions at these low intensities. The TM110 resonance frequency of 145.7 MHz is matched to the second harmonic of the beam pulse repetition rate (i.e.72.85 MHz). HFSS (High Frequency Structural Simulator) provides the BPM geometry and important parameters such as pickup position; dielectric dimensions etc. Comparison of test bench measurement and simulation provides good agreement. The measured position and signal sensitivity are limited by the noise, so that a position signal can be derived at beam intensities of at least 10 nA . We will discuss potential methods to increase the sensitivity. The dipole cavity resonator can be a promising candidate as a non-invasive position di-agnostic at the low proton beam intensities used in pro-ton therapy

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW083

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW091

Beam Loss Control with Scintillating Monitors at ISIS

synchrotron, operation, monitoring, neutron

2701

B. Jones, S.A. Fisher, A. Pertica
STFC/RAL/ISIS, Chilton, Didcot, Oxon, United Kingdom

The ISIS Facility at the Rutherford Appleton Laboratory produces intense neutron and muon beams for condensed matter research. Since 1984 its 50 Hz, rapid cycling synchrotron has accelerated protons from 70 to 800 MeV and now typically delivers 0.2 MW of beam to two target stations supplying thirty-four instruments. Control and minimisation of beam loss is vital to the success of high-power proton accelerators. Coverage and sensitivity of beam loss monitoring at ISIS has recently been improved by the installation of scintillating monitors inside the synchrotron’s main dipoles. In addition to their primary goal of preventing damage to dipole RF screens, these monitors have also provided a highly sensitive tool for empirical accelerator optimisation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW091

About •

paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW112

Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique*

cyclotron, linac, detector, electron

2760

A.C.C. Villari, D.B. Crisp, A. Lapierre, S. Nash, T. Summers, Q. Zhao
NSCL, East Lansing, Michigan, USA

Funding: * This material is based upon work supported by the National Science Foundation under Grant No. PHY15-65546.
We report on a simple method to perform an absolute calibration of the magnetic beam analyser of the reaccelerator ReA3 at the National Superconducting Cyclotron Laboratory. The method is based on the time of flight between two beam stoppers 7.65 m apart. Based on two independent time-of-flight measurements at three different beam energies, the beam analyser magnet is calibrated with an accuracy of 0.12 %, corresponding to a beam energy accuracy of 0.24 %.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW112

About •

paper received ※ 25 April 2019 paper accepted ※ 28 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW123

Full Acceptance Interaction Region Design of JLEIC

electron, detector, coupling, interaction-region

2787

V.S. Morozov, R. Ent, Y. Furletova, F. Lin, T.J. Michalski, R. Rajput-Ghoshal, M. Wiseman, R. Yoshida, Y. Zhang
JLab, Newport News, Virginia, USA
Y. Cai, Y.M. Nosochkov, M.K. Sullivan
SLAC, Menlo Park, California, USA
G.L. Sabbi
LBNL, Berkeley, California, USA

Funding: This material is based upon work supported by the U.S. DoE under Contracts No. DE-AC05-06OR23177, DE-AC02-76SF00515, and DE-AC03-76SF00098.
Nuclear physics experiments envisioned at a proposed future Electron-Ion Collider (EIC) require high luminosity of 10³³-10³⁴ cm^-2s^-1 and a full-acceptance detector capable of reconstruction of a whole electron-ion collision event. Due to a large asymmetry in the electron and ion momenta in an EIC, the particles associated with the initial ion tend to go at very small angles and have small rigidity offsets with respect to the initial ion beam. They are detected after they pass through the apertures of the final focusing quadrupoles. Therefore, the apertures must be sufficiently large to provide the acceptance required by experiments. In addition, to maximize the luminosity, the final focusing quadrupoles must be placed as close to the interaction point as possible. A combination of these requirements presents serious detection, optics and engineering design challenges. We present a design of a full-acceptance interaction region of Jefferson Lab Electron-Ion Collider (JLEIC). The paper presents how this design addresses the above requirements up to an ion momentum of 200 GeV/c. We summarize the magnet parameters, which are kept consistent with the Nb-Ti superconducting magnet technology.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW123

About •

paper received ※ 23 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB069

Wakefield Suppression in a Manifold Damped and Detuned Structure for a 380 GeV CLIC Staged Design

wakefield, damping, accelerating-gradient, collider

2980

N.Y. Joshi, R.M. Jones
UMAN, Manchester, United Kingdom

The first stage of the Compact Linear Collider (CLIC) project aims to collide electrons and positrons at a 380 GeV center of mass energy. In the baseline design the main linacs for this staged approach are required to achieve a gradient of 72 MeV/m, with the surface electromagnetic fields (EM) and the transverse long-range wakefields bound by beam dynamics constraints. The baseline design utilizes heavy damping in a traveling wave (TW) structure. Here we report on an alternate design, which adopts moderate damping along with strong detuning of the individual cell frequencies. In the context of this Damped and Detuned Structure (DDS) design, we study Gaussian and hyperbolic secant dipole distributions, together with interleaving of successive structures, to effect long-range transverse wakefield suppression. Both analytic and modal summation approaches, in the quasi-coupled approximation, produce consistent results. In the optimisation scheme we opt for a dipole frequency bandwidth of 17.7 % (2.92 GHz)

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB069

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB076

Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider

cavity, multipole, HOM, electron

2996

S.U. De Silva, J.R. Delayen, S. Sosa
ODU, Norfolk, Virginia, USA
V.S. Morozov, H. Park
JLab, Newport News, Virginia, USA

The crabbing system is a key feature in the Jefferson Lab Electron-Ion Collider (JLEIC) required to increase the luminosity of the colliding bunches. A local crabbing system will be installed with superconducting rf-dipole crabbing cavities operating at 952.6 MHz. The field non-uniformity across the beam aperture in the crabbing cavities produces higher order multipole components, similar to that which are present in magnets. Knowledge of higher order mode multipole field effects is important for accurate beam dynamics study for the crabbing system. In this paper, we quantify the multipole components and analyse their effects on the beam dynamics.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB076

About •

paper received ※ 20 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB077

Simulation and Measurements of HOM Filter of the LARP Prototype RF-Dipole Crabbing Cavity Using an RF Test Box

HOM, cavity, luminosity, damping

2999

S.U. De Silva, J.R. Delayen
ODU, Norfolk, Virginia, USA
Z. Li
SLAC, Menlo Park, California, USA

The RF-Dipole Crabbing Cavity designed for the LHC High Luminosity Upgrade includes two higher order mode (HOM) couplers. One of the HOM couplers is an rf filter, which is a high pass filter designed to couple to the horizontal dipole modes and accelerating modes up to 2 GHz, while rejecting the fundamental operating mode at 400 MHz. The coupler consists of a high pass filter circuit where the rejection of the operating mode and transmission of HOMs are sensitive to dimensional deviations. An rf test box has been designed to measure the transmission of the rf filter in order to qualify the fabricated HOM coupler and to tune the coupler. This paper presents the measurements of the HOM coupler with the rf test box.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB077

About •

paper received ※ 20 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS005

Long Range Beam-Beam Tune Shifts & Wire Compensation

site, beam-beam-effects, closed-orbit, quadrupole

3092

S.R. Koscielniak
TRIUMF, Vancouver, Canada

The weak-strong model subjects the test particle in the weak beam to transverse impulses from the strong beam, resulting in betatron tune shifts. We give analytic formulae for small amplitude and asymptotic shifts for three cases: short-range, long-range, and wire compensation; and optimize the latter to minimize the non-linear tune spreads.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS005

About •

paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS018

Experimental Observation of Low-Order Collective Oscillation Modes in a Strong-Focusing Lattice

quadrupole, plasma, resonance, experiment

3130

K. Ito, H. Higaki, H. Okamoto
HU/AdSM, Higashi-Hiroshima, Japan
T. Kurauchi
Hiroshima University, Faculty of Science, Higashi-Hirosima, Japan

In a conventional linear Paul trap (LPT), four electrode rods are placed symmetrically around the trap axis to generate a radio-frequency quadrupole field for transverse ion confinement. The periodic nature of the external focusing potential can give rise to serious ion losses under a specific condition. The loss mechanism is essentially the same as the coherent betatron resonance well-known in intense beam dynamics[*,**]. In fact, the collective motion of an ion plasma in the LPT is shown equivalent to that of a charged-particle beam traveling through an alternating-gradient focusing lattice. In the present study, we perform the direct measurement of low-order coherent oscillation modes in the LPT by detecting image currents induced on the electrodes’ surfaces. The four-rod structure of the LPT allows us to pick up feeble signals of the dipole and quadrupole oscillations of a plasma bunch. These signals are Fourier analyzed to evaluate the coherent oscillation tune at different initial ion densities. The time evolution of the coherent motion is also discussed in this paper.
* K. Moriya et al., Phys. Rev. Accel. Beams Vol.19, 114201 (2016).
** K. Ito et al., Phys. Rev. Accel. Beams Vol. 20, 064201 (2017).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS018

About •

paper received ※ 26 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP003

The PRORAD Beam Line Design for PRAE

electron, alignment, linac, gun

3448

A. Faus-Golfe, B. Bai, Y. Han, C. Vallerand
LAL, Orsay, France
P. Duchesne, D. Marchand, E.J-M. Voutier
IPN, Orsay, France

The PRAE (Platform for Research and Applications with Electrons) accelerator is being built at Orsay campus with the main objective of creating a multidisciplinary R&D platform, involving subatomic physics, instrumentation, radiobiology and clinical research around a high-performance electron accelerator with beam energies up to 70 MeV (planned 140 MeV). In this paper we will report the optics design and beam dynamics simulations for the beam line dedicated to subatomic physics, more specifically for the measurement of the proton radius. This measurement requires extremely low energy spread (5×10−4) and small beam sizes with low divergence at three beam energies: 30, 50 and 70 MeV. The beam line includes a D-type chicane coupled to a dechirping passive structure, which generates inductive wakeﬁelds in order to get the performances required for such measurement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP003

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP017

Design and Development of the Beamline System for a Proton Therapy Facility

kicker, proton, quadrupole, optics

3488

B. Qin, Q.S. Chen, M. Fan, K.F. Liu, X. Liu, J. Yang, Z.F. Zhao
HUST, Wuhan, People’s Republic of China
W.J. Han, D. Li, Z.K. Liang
Huazhong University of Science and Technology, State Key Laboratory of Advanced Electromagnetic Engineering and Technology,, Hubei, People’s Republic of China

Funding: This work was supported by The National Key Research and Development Program of China, with grant No. 2016YFC0105305; and by National Natural Science Foundation of China (11375068).
A proton therapy facility with multiple treatment rooms based on superconducting cyclotron scheme is under development in HUST (Huazhong University of Science and Technology). Design features and overview of development progress for the beamline system will be presented in this paper, which mainly focuses on prototype beamline magnets, a kicker magnet for fast beam switch, and the gantry beamline using image optics.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP017

About •

paper received ※ 29 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP034

Simulating Matter Interactions of Partially Stripped Ions in BDSIM

electron, target, simulation, hadron

3514

A. Abramov, S.T. Boogert, L.J. Nevay
JAI, Egham, Surrey, United Kingdom

Acceleration and storage of beams of relativistic partially stripped ions is more challenging than in the case of fully stripped ions because the interactions with matter, such as those with residual gas and collimators can strip electrons via ionisation. BDSIM is a code for the simulation of energy deposition and charged particle backgrounds in accelerators that uses the Geant4 physics library. Geant4 includes a broad range of ion elastic and inelastic interactions and allows the definition of partially stripped ion beams. However, no models are currently available to handle in-flight interactions involving the bound electrons. In this paper we present a semi-empirical model of beam ion stripping by material atoms that is implemented in BDSIM as an extension of Geant4’s existing physics processes and is fully integrated into a comprehensive set of matter interactions for partially stripped ions. The stripping cross-section for select cases and results from comprehensive simulations are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP034

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP050

Progress on the Optics Modeling of BMI’s Ion Rapid-Cycling Medical Synchrotron at BNL

optics, focusing, GUI, simulation

3561

F. Méot, P.N. Joshi, N. Tsoupas
BNL, Upton, Long Island, New York, USA
J.P. Lidestri
Best Medical International, Springfield, USA

Funding: A project funded by Best Medical International, in the framework of a Technical Services Agreement (No. TSA-NF-18-50) with Brookhaven National Laboratory.
The Brookhaven National Laboratory continues to provide technical support and guidance to Best Medical International to build and test a 60 degree magnetic arc of a rapid-cycling ion synchrotron for cancer treatment. The 60 degree magnetic sector on its guirder has undergone field measurements, including the production of partial 3D field maps. Concurrently, OPERA field map computations as well as lattice and beam dynamics simulations have been performed, aimed at both preparing and analyzing the field measurements. Contingency responses aimed at adapting to non-ideal orbit and optics have been devised. These works and their outcomes are summarized here.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP050

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP054

Superconducting Dipole Design for a Proton Computed Tomography Gantry

shielding, proton, site, solenoid

3574

E. Oponowicz, H.L. Owen
UMAN, Manchester, United Kingdom

Funding: This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the MSC grant agreement No 675265, OMA - Optimization of Medical Accelerators.
Proton computed tomography aims to increase the accuracy of proton treatment planning by directly measuring proton stopping power. This imaging technique requires a proton beam of 330 MeV incident kinetic energy for adult patients. Employing superconducting technology in the beam delivery system allows it to be of comparable size to a conventional proton therapy gantry. A superconducting bending magnet design for a proton computed tomography gantry is proposed in this paper. The 30 deg, 3.9 T canted-cosine-theta dipole wound with NbTi wires is used to steer 330 MeV protons in an isocentric beam delivery system which rotates around the patient. Two methods of magnetic field shielding are compared in the context of proton therapy facility requirements; traditional passive shielding with an iron yoke placed around the magnet and an active shielding option utilising extra layers of the superconducting coil.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP054

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW024

Beam-based Alignment at the Cooler Syncrotron (COSY)

quadrupole, alignment, experiment, synchrotron

3632

T. Wagner, J. Pretz
FZJ, Jülich, Germany

There is a matter-antimatter asymmetry observed in the universe that can not be explained by the Standard Model of particle physics. To resolve that problem additional CP violating phenomena are needed. A candidate for an additional CP violating phenomenon is a non-vanishing Electric Dipole Moment (EDM) of subatomic particles. Since permanent EDMs violate parity and time reversal symmetries, they also violate CP if the CPT-theorem holds. The Jülich Electric Dipole moment Investigation (JEDI) Collaboration works on a direct measurement of the electric dipole moment (EDM) of protons and deuterons using a storage ring. The JEDI experiment requires a small beam orbit RMS in order to measure the EDM. Therefore an ongoing upgrade of the Cooler Syncrotron (COSY) is done in order to improve the precision of the beam position. One of part of this upgrade is to determine the magnetic center of the quadrupoles with respect to the beam position monitors. This can be done with the so called beam-based alignment method. The first results of the beam-based alignment measurement performed in February 2019 will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW024

About •

paper received ※ 29 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW040

Decay Muon Beamline Design for EMuS

target, proton, solenoid, simulation

3670

Y.P. Song, Y. Bao, C. Meng, J.Y. Tang
IHEP, Beijing, People’s Republic of China
Y.K. Chen, H.T. Jing
IHEP CSNS, Guangdong Province, People’s Republic of China

Funding: This work is supported by the Chinese Academy of Sciences.
The beamline design philosophies and simulation re-sults of the decay muon on Experimental Muon Source (EMuS) are reported in this paper. The beamline is com-posed of solenoids to keep large acceptance, and has been optimized for 45, 150 and 450 MeV/c decay muon re-spectively according to the π spectra optimization results from target station. Decay muons from 45 to 150 MeV/c are designed for μSR applications, and 150 to 450 MeV/c are designed for muon imaging, which is unique on the high momentum perspective. Negative muons from 45 to 150 MeV/c are designed for muonic applications. The momentum range of decay muon is tuneable between 45 and 450 MeV/c.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW040

About •

paper received ※ 01 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW067

Progress Towards a Single-Shot Emittance Measurement Technique at AWAKE

emittance, quadrupole, plasma, electron

3742

J. Chappell, D.A. Cooke, L.C. Deacon, S. Jolly, F. Keeble, M. Wing
UCL, London, United Kingdom

Externally injected electrons are captured and accelerated in the plasma wake of a self-modulated proton beam at the Advanced Wakefield Experiment (AWAKE) at CERN. The energy distribution of the accelerated electron beam is measured using a dipole spectrometer in combination with a scintillator screen, with two upstream quadrupoles providing energy-dependent focusing. Measuring the vertical beam size variation with horizontal position along the scintillator screen, and therefore energy, results in an effective quadrupole scan permitting single shot vertical geometric emittance measurements. Limitations of the method due to effects such as imperfect beam focusing and finite resolution are explored via simulations using the beam tracking code BDSIM.
james.chappell.17@ucl.ac.uk

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW067

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW094

Phasing of Superconductive Cavities of the REX/HIE-ISOLDE LINAC

cavity, detector, linac, ISOL

3786

E. Matli, N. Bidault, E. Piselli, J.A. Rodriguez
CERN, Geneva, Switzerland

ISOLDE is a facility dedicated to the production of a large variety of Radioactive Ion Beams. The facility is located at the European Organization for Nuclear Research (CERN). In addition to two target stations followed by low energy separators, the facility includes a post-accelerating linac with both normal conducting (REX) and superconducting (HIE-ISOLDE) sections. The HIE-ISOLDE section consists of four cryomodules with five SRF cavities each that need to be phased individually. In this paper, we will describe the procedure and the software applications developed to phase each of the cavities as well as improvements that will be introduced in the near future to reduce the time it takes to complete the process.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW094

About •

paper received ※ 02 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB003

Automatic Classification of Post Mortem Data for Reduced Beam Down Time

synchrotron, power-supply, real-time, operation

3799

M.C. Chalmers, Y.E. Tan
AS - ANSTO, Clayton, Australia

Time spent recovering from faults that result in a rapid loss of stored current (a total beam loss event) can be costly to the Australian Synchrotron facility and its researchers. The identification of a fault leading to total beam loss is assisted by a large variety of investigative tools for specific tasks, but they do not often give a thorough overview of all systems required to store beam. Post mortem data uniquely provides insight into how the beam was behaving at the specific time the dump occurred. With machine learning, we find that we can automatically and rapidly identify many types of total beam loss events by learning about the unique characteristics in the post mortem files.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB003

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS010

Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR

quadrupole, operation, sextupole, superconducting-magnet

4124

E.S. Fischer, A. Bleile, V.I. Datskov, V. Marusov, J.P. Meier, P.J. Spiller
GSI, Darmstadt, Germany

The fast cycling superconducting synchrotron SIS100 has to deliver high intensity beams for the FAIR project at GSI, Darmstadt. The main dipoles will ramp with 4 T/s up to a maximum magnetic field of 1.9 T where the field gradient of the main quadrupole will reach 27.77 T/m. The integral magnetic field length of the horizontal/vertical steerer and of the chromaticity sextupole will provide 0.403/0.41 m and 0.383 m respectively. We present the status of the first magnets test results as well as the overall procedure of production and testing of the complete series of the cryomagnetic corrector modules.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS010

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS011

Design, Production, and Testing of Superconducting Magnets for the Super-FRS

quadrupole, cryogenics, octupole, superconducting-magnet

4128

H. Müller, E.J. Cho, G. Golluccio, C. Roux, H. Simon, K. Sugita, M. Winkler
GSI, Darmstadt, Germany
H. Allain, M. Daly, P. Grafin, A. Madur, J.-E. Munoz-Garcia, L. Quettier, H. Reymond
CEA-IRFU, Gif-sur-Yvette, France
A. Borceto, G. Drago, G. Valesi, D. Ventura
ASG, Genova, Italy
J. Lucas
Elytt Energy, Madrid, Spain
L.X. Van Den Boogaard
CERN, Geneva, Switzerland

The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its purpose is to create and separate rare isotope beams and to enable the mass measurement also for very short lived nuclei. Due to its three branches a wide variety of experiments can be carried out in frame of the NUSTAR collaboration. Due to the large acceptance needed, the magnets of the Super-FRS have to have a large aperture and therefore only a superconducting solution is feasible. A superferric design with superconducting coils was chosen in which the magnetic field is shaped by an iron yoke. For the dipoles this iron yoke is at warm and only the coils are incorporated in a cryostat. The multiplets, assemblies of quadrupoles and higher order multipole magnets, are completely immersed in a liquid Helium bath. With the exception of special branching dipoles all superconducting magnets of Super-FRS have been contracted and are being built by Elytt in Spain (dipoles) and ASG in Italy (multiplets). The cold test of all magnets will take place in a dedicated test facility at CERN. This contribution will present the status of manufacturing of dipoles and multiplets, and also gives a short overview on the test facility.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS011

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS014

Visual Inspection of Curved Particle Accelerator Beam Pipes with a Modular Robot

controls, experiment, vacuum, simulation

4135

N. Schweizer
RMR, TU Darmstadt, Darmstadt, Germany
I. Pongrac
GSI, Darmstadt, Germany

Inspecting ultra-high vacuum pipe systems of particle accelerators without disassembling the beam pipes is a complex challenge. In particular, curved sections of particle accelerators require a unique approach for the examination of the interior. For the planned heavy ion synchrotron SIS100 at FAIR, an inspection robot is currently under development, featuring an optical imaging system with which the robot can be navigated through the beam pipe. We present the current prototype, which is based on a modular snake-like robot with active wheels and joints. Due to the stipulated low movement velocity, it can be shown that a kinematic model is sufficient to control the robot whereas dynamical effects can be neglected. This concept is proven in experiments with the prototype. At the current development status, the robot is controlled manually by setting the velocity of the first module and its desired turning angle. In simulations we include a CAD model of a dipole chamber of the SIS100 and let an operator successfully navigate the robot through the beam pipe while only observing the camera image.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS014

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS017

ILSF Ultralow Emittance Storage Ring Magnets

quadrupole, sextupole, storage-ring, multipole

4142

F. Saeidi, S. Dastan, J. Rahighi, M. Razazian
ILSF, Tehran, Iran

Iranian Light Source Facility (ILSF) is a 3 GeV synchro-tron which is in the basic design phase. The ILSF storage ring (SR) is based on a Five-Bend Achromat lattice providing a low horizontal beam emittance of 270 pm-rad. The ILSF storage ring consists of 100 combined di-pole magnets of 2 types, 240 quadrupoles in 5 families and also 320 sextupoles in 6 families. In this paper, we present some design features of the SR magnets and dis-cuss the detailed physical design of these electromagnets including electrical and cooling calculations. Using POISSON and OPERA codes [1,2], pole and yoke geome-try was developed for each magnet

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS017

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS018

ILSF Booster Magnets for the New Low Emittance Lattice

booster, sextupole, quadrupole, multipole

4145

F. Saeidi, S. Dastan, S. Fatehi, J. Rahighi, M. Razazian
ILSF, Tehran, Iran

Iranian light source facility is a new 3rd generation light source with a booster which is supposed to work at 150 keV injection energy and guide the electrons to a 3GeV ring. It consists of 50 combined dipole magnets in one type, 50 quadrupoles and 15 sextupoles in one family. Using POISSON and OPERA3D codes[1,2], pole and yoke geometry was designed for each magnet and also cooling and electrical calculations have been done. ILSF has attempted to mechanical design and build prototype magnets which are ongoing at this stage too.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS018

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS027

Accelerator Implementing Development of Ceramics Chamber with Integrated Pulsed Magnet for Beam Test

kicker, vacuum, power-supply, injection

4164

C. Mitsuda, Y. Kobayashi, S. Nagahashi, T. Nogami, T. Obina, R. Takai, H. Takaki, T. Uchiyama, A. Ueda
KEK, Ibaraki, Japan
T. Honiden, T. Nakanishi
SES, Hyogo-pref., Japan
A. Sasagawa, A. Yokoyama, T. Yokoyama
KYOCERA Corporation, Higashiomi-city, Shiga, Japan

We advance the development of Ceramics Chamber Integrated Pulsed Magnet (CCIPM) of air-core type as the application to low emittance ring with a narrow bore of light source accelerator in the future. The CCIPM is composed of ceramics cylinder of 60 mm diameter and four copper coils, which are implanted in the groove penetrated on the ceramic thickness along 30 cm length by silver brazing*. In addition to this structure, we succeeded in the implementations of cable connecting base that mechanically connect the coils and power supply with feeder lines and the pattern shape coating inside the ceramic cylinder. Improved brazing technique made it possible to braze the coil and the base on the coil at the same time that the coils are implanted in the ceramic thickness. Newly developed functional coating can reduce the eddy current caused by main magnetic field and pass the alternate component of beam wall current by capacitance structure. We report the details about the performance from the viewpoint of vacuum, magnetic field, insulation on the accelerator implementation with the approach to new technical development, and the preparation progress of beam test in beam-transport line.
* C. Mitsuda, et al., in Proc. IPAC2015, Richmond, VA, USA, p. 2879

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS027

About •

paper received ※ 12 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS036

Quench Detection and Diagnostic Systems for the Superconducting Circuits for the HL-LHC

luminosity, data-acquisition, radiation, electronics

4183

R. Denz, D.O. Calcoen, E. De Matteis, V. Froidbise, S. Georgakakis, S. Haas, S. Mundra, T. Podzorny, A.P. Siemko, J. Spasic, J. Steckert
CERN, Geneva, Switzerland
D. Blasco Serrano
CIEMAT, Madrid, Spain

The High Luminosity LHC project (HL-LHC) will incorporate a new generation of superconducting elements such as high field superconducting magnets based on Nb₃Sn conductors and MgB₂ based high temperature superconducting links for magnet powering. In addition, the HL-LHC will also feature new generations of NbTi based magnets. The proper protection and diagnostics of those elements require the development of a new generation of integrated quench detection and data acquisition systems as well as novel methods for quench detection. The next generation of quench detection systems is to a large extent software defined and serves at the same time as high performance data acquisition system. The contribution will discuss the specific needs of HL-LHC in terms of quench detection and present recent results from tests with prototype magnets. The contribution will show the implementation of new quench detection methods such as current derivative sensors. Measures for increasing the system dependability and easing its maintenance will be explained, as well as the improved supervision architecture using Ethernet based field-bus systems for fast data transmission.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS036

About •

paper received ※ 07 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS040

Preliminary Design of Mechanical Supports for the Booster of Heps

booster, quadrupole, alignment, sextupole

4197

H. Wang, C.H. Li, C. Meng, H. Qu
IHEP, Beijing, People’s Republic of China

The Booster of High Energy Photon Source (HEPS) is a 454 meters ring with the repeat frequency of 1 Hz. The natural frequency of the magnets and their support as-sembly should be higher than 30 Hz. The alignment re-quirements on quadrupole and sextupole are better than 0.1 mm in x and y direction. This paper will discuss the preliminary design of the mechanical supports in Booster ring, as well as the discussion of finite element analyses results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS040

About •

paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS041

Progress and TDR Plans of the Mechanical System of CEPC

detector, alignment, vacuum, collider

4200

H. Wang, S. Bai, M.X. Li, Y.D. Liu, C. Meng, H. Qu, J.L. Wang, P. Zhang, N. Zhou
IHEP, Beijing, People’s Republic of China

The TDR of CEPC is aimed at the key science and technology problems and makes preparations for the real project. This paper will describe the progress of mechanical system including the regular supports and transport vehicle design, the mockup plan, the installation scenario of machine detector interface (MDI) and the movable collimator, as well as the TDR plans of mechanical system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS041

About •

paper received ※ 28 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS043

PRELIMINARY MAGNETIC FIELD CALCULATION OF A 30-DEGREE DIPOLE MAGNET

simulation, proton, operation, laser

4204

H. Liang, J. Huang, C. Jiang, T. Liu, B. Qin, K. Tang, J. Yang, J.Q. Ye
HUST, Wuhan, People’s Republic of China
Y. Xie, T. Yu
Huazhong University of Science and Technology, State Key Laboratory of Advanced Electromagnetic Engineering and Technology,, Hubei, People’s Republic of China

Preliminary design and field calculation of a 30-degree H-type dipole which can be applied to the beamline is introduced in this paper. According to the phys-ical requirements, 2D and 3D models are built and ana-lysed using OPERA. For achieving the magnetic field specifications, air slots are adopted, and trapezoidal shim on pole surface is used to improve the magnetic field error. Rogowski curve and harmonic shim at the pole end is used to reduce the integral magnetic field error and the higher order harmonic field error.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS043

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS044

Parameter Design of a Rotating Coil Measurement System for Quadrupoles

quadrupole, multipole, focusing, synchrotron-radiation

4207

Y. Xie, W. Chen
Huazhong University of Science and Technology, State Key Laboratory of Advanced Electromagnetic Engineering and Technology,, Hubei, People’s Republic of China
H. Liang, B. Qin, J. Yang
HUST, Wuhan, People’s Republic of China

Funding: This work was supported by The National Key Research and Development Program of China; and by National Natural Science Foundation of China (11375068).
HUST-PTF is a 5-year National Key Research and Development Program of China which is composed of cyclotron, beamline system, treatment chambers, etc. The beamline system connects the cyclotron and treatment chambers, provides proton beams in adequate size and shape and is crucial to the whole program. Vast dipoles and quadrupoles are employed in the beamline. Aimed at the quadrupoles used in the beamline, this article carried out the research on the high-precision rotating coil magnetic measurements for quadrupoles, including the quadrupole parameters, the principle and structure of the measuring system, measuring procedures and data processing method. Design of the rotating coils and analysis of the main errors are also contained.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS044

About •

paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS053

Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K

synchrotron, experiment, superconducting-magnet, operation

4221

A.D. Kovalenko, V.A.. Gromov, E.E. Perepelkin, G. Shirkov
JINR, Dubna, Moscow Region, Russia
B. Bordini, D. Tommasini
CERN, Geneva, Switzerland
A. Kolomiets
ITEP, Moscow, Russia
S. Kozub, L. Tkachenko
IHEP, Moscow Region, Russia

The option being considered for the FCC-hh high energy injector is a superconducting synchrotron replacing the CERN SPS. The new machine would operate in a cycled mode also to feed experimental areas, much like the SPS nowadays. Due to this specific cycled operation, innovative design and development approaches is required to cope with the AC losses in the superconducting cables and iron yoke. The research joins experience accumulated at CERN and JINR respectively in the design and operation of large systems operated at 1.9 K and, in fast ramped and cycled magnets. The specified parameters are the following: magnet aperture -80 mm; aperture field - 6 T; field ramp 0.2-0.5 T/s; coil conductor - NbTi; magnetic field homogeneity between 0.12 and 6 T of the order of 5·10^-4. The minimization of the cycling losses is particular important. Total thermal losses should be limited to tentatively < 2 W/m at 4.2 K. The magnet design, and the results of preliminary tests on a candidate NbTi-wire for building a model magnet are presented and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS053

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS055

Design and Construction of 3D Helmholtz Coil System to Calibrate 3D Hall Probes

HOM, alignment, controls, simulation

4228

J. Marcos, J. Campmany, A. Fontanet, V. Massana, L.R.M. Ribó
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

In this paper we present the design of a system of 3D Helmholtz coils aimed to generate a magnetic field in any direction in a controlled way. The system is intended to be applied to the detailed characterisation of the response of 3D Hall probes as a function of the orientation of the measured field. The system will generate magnetic fields of up to 5 mT with an expected angular precision of 0.2 mrad.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS055

About •

paper received ※ 26 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS084

Magnet Design Optimization for Future Hadron Colliders

collider, hadron, magnet-design, power-supply

4307

V.V. Kashikhin, V. Lombardo, G. Velev
Fermilab, Batavia, Illinois, USA

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
Fermilab in collaboration with other members of the US Magnet Development Program (MDP) is working on the development of accelerator magnets for future hadron colliders. A 4-layer, 15-T dipole with 60 mm aperture based on Nb₃Sn Low Temperature Superconductor (LTS) has been fabricated and tested. It is an important milestone of demonstrating readiness of the LTS magnet technology for the next generation of hadron colliders. At the same time, design studies aimed at boosting the magnet performance even further with the help of High Temperature Superconductors (HTS) are under way. This paper introduces a novel magnet technology - Conductor On Molded Barrel (COMB) optimized for the HTS materials and discusses possible steps towards its demonstration.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS084

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS088

CBETA Permanent Magnet Production Run

multipole, permanent-magnet, quadrupole, undulator

4318

S.J. Brooks, G.J. Mahler, R.J. Michnoff, J.E. Tuozzolo
BNL, Upton, Long Island, New York, USA

214 neodymium permanent magnets have been manufactured for the return loop of the CBETA multi-turn ERL being built at Cornell University. There are 5 types of quadrupole and combined-function gradient magnets using a variant of the circular Halbach design. These are made out of NdFeB material and glued into an aluminium housing with water channels for temperature stabilisation. The NdFeB wedges and magnet construction were done by outside companies, while the final "tuning" using inserts containing 64 iron wires per magnet was done at BNL over a period of about 6 months. Average relative field errors of 2.3·10^-4 were achieved on the beam region. The magnet strengths vary by type but are of order 10T/m for quadrupole component and up to 0.3T for the dipole. This paper reports on the field quality and timeline achieved in this production process.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS088

About •

paper received ※ 11 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS094

High Gradient Quadrupoles for Low Emittance Synchrtrons

quadrupole, focusing, vacuum, lattice

4332

S.K. Sharma, T.V. Shaftan, V.V. Smaluk, C.J. Spataro, T. Tanabe, G.M. Wang
BNL, Upton, Long Island, New York, USA
N.A. Mezentsev
BINP SB RAS, Novosibirsk, Russia

A new lattice design has been proposed recently based on a Complex-Bend concept [1,2] for low emittance syn-chrotrons. The dipoles of a standard DBA lattice are replaced in the Complex Bend by high-gradient (~ 450 T/m) quadrupoles interleaved between discrete dipoles. In another version of the Complex Bend [3] the high gradient quadrupoles are displaced transversely along the beam trajectory to generate the required dipole field. In the latter version the quadrupole strength is reduced to ~ 250 T/m for a lattice that will conform to the layout of the existing NSLS-II 3-GeV storage ring. In this paper we present conceptual designs of a Halbach permanent-magnet (PM) quadrupole, a hybrid PM quadrupole, and a superconducting quadrupole, that can produce the de-sired quadrupole strengths for the Complex Bend appli-cation. REFERENCES [1] T. Shaftan, V. Smaluk and G. Wang, ’The Concept of Com-plex Bend’, NSLS-II Tech note No. 276, Jan 2018. [2] G. Wang et al., ’Complex Bend: Strong-focusing magnet for low emittance synchrotrons’, Physical Review Accelerators and Beams, 21, 100703 (2018). [3] G. Wang et al., ’Complex Bend II’, paper submitted to Physi-cal Review Accelerators and Beams.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS094

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS099

Fermilab Superconducting Nb₃Sn High Field Magnet R&D Program

operation, collider, status, proton

4338

G. Velev, G. Ambrosio, E.Z. Barzi, V.V. Kashikhin, S. Krave, V. Lombardo, I. Novitski, S. Stoynev, D. Turrioni, X. Xu, A.V. Zlobin
Fermilab, Batavia, Illinois, USA

Funding: Work supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy.
Magnets based on the modern Nb₃Sn conductor are the main candidates for future high-energy hadron colliders. Fermilab as part of the U.S. MDP executes an extensive R&D program on these high-field magnets. This program includes basic conductor and material R&D, quench per-formance studies, and building a meter-long high-field demonstrator. This paper summarizes the current status of the program including its recent results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS099

About •

paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS100

Measurements of Decay and Snapback in Nb₃Sn Accelerator Magnets at Fermilab

injection, quadrupole, sextupole, luminosity

4342

G. Velev, G. Ambrosio, G. Chlachidze, J. DiMarco, S. Stoynev, T. Strauss
Fermilab, Batavia, Illinois, USA

Funding: Work supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy.
In recent years, Fermilab has been executing an inten-sive R&D program on Nb₃Sn accelerator magnets. This program has included dipole and quadrupole models and demonstrators for various programs and projects, including the HL-LHC accelerator upgrade project. A systematic study of the field decay and snapback during the injection portion of a simulated accelerator cycle was executed at the Fermilab Magnet Test Facility. This paper summarizes the recent measurements of the MQXFS1 short quadrupole model and discusses the results of some previously measured Nb₃Sn magnets at CERN

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS100

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLM1

High Field Superconducting Magnet Program for Accelerators in China

proton, collider, superconducting-magnet, background

4359

Q.J. Xu
IHEP, Beijing, People’s Republic of China

High field superconducting magnets are crucial for high-energy particle accelerators. IHEP (institute for High Energy Physics, Beijing) is pursuing critical technologies R&D for future circular colliders like the Super Proton Proton Collider (SPPC). SPPC will need thousands of high field (12-20 T) superconducting magnets in around 20 years. A long term R&D roadmap of the advanced high field magnets has been made, aiming to push the technology frontier to the desired level, and a strong domestic collaboration is established, which brings together expertise of Chinese superconductivity community from fields of materials, physics, technology and engineering. The goal is to address prominent scientific and technological issues and challenges for high field applications of advanced superconducting materials. In the past year a model magnet with hybrid coils (NbTi and Nb₃Sn ) has been manufactured and tested, reaching a dipole field above 10 T in the two apertures. A full Nb₃Sn model has also been fabricated and tested with a coil made of iron based superconductor inserted in the center. An overview of the high field magnet program, R&D status and the future plans will be presented.

Slides FRXXPLM1 [10.978 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLM1

About •

paper received ※ 20 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)