IPAC2019 - List of Keywords (linear-collider)

Paper	Title	Other Keywords	Page
MOPGW085	Intensity Dependent Effects in the ILC BDS	wakefield, luminosity, collider, simulation	305
	P. Korysko, A. Latina CERN, Geneva, Switzerland P. Burrows Oxford University, Physics Department, Oxford, Oxon, United Kingdom
	The International Linear Collider (ILC) is an electron-positron collider being considered for the post-LHC era. Its Beam Delivery System (BDS) receives the beam from the main linac. This beam is then focused to the nanometer scale after going through collimators, beam diagnostic systems, strong magnets, etc. Effects such as wakefields due to resistive-wall, BPMs and collimators make the system very sensitive to the beam intensity. Understanding these effects is crucial in order to demonstrate that the nominal beam size at the Interaction Point (IP) can be reached in realistic scenarios. In this paper, results of the intensity dependence effects in the ILC BDS, simulated with PLACET, are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW085
About •	paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW086	Intensity Dependent Effects at ATF2, KEK	simulation, collider, wakefield, electron	308
	P. Korysko, A. Latina CERN, Geneva, Switzerland P. Burrows Oxford University, Physics Department, Oxford, Oxon, United Kingdom A. Faus-Golfe LAL, Orsay, France K. Kubo, T. Okugi KEK, Ibaraki, Japan
	The Accelerator Test Facility 2 (ATF2) at KEK is a prototype for the Final Focus Systems of the future e⁺e⁻ linear colliders, the International Linear Collider (ILC) and the Compact Linear Collider (CLIC). In this paper both simulation and experimental results are presented with special emphasis on intensity-dependent effects. The importance of these effects is shown using the PLACET code and realistic ATF2 machine simulations (including beam jitter, misalignment, wakefield, Beam Based Alignment (BBA) correction, …). The latest experimental results are also presented, in particular the impact of the beam intensity on the beam size at the IP.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW086
About •	paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP016	Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV	linac, luminosity, collider, emittance	458
	N. Blaskovic Kraljevic, D. Arominski, D. Schulte CERN, Meyrin, Switzerland
	The first stage of the electron-positron Compact Linear Collider (CLIC) is designed with a centre-of-mass energy of 380 GeV. A dedicated threshold scan in the vicinity of 350 GeV is envisioned with a total integrated luminosity of 100 fb^-1. This scan calls for a very small intra-bunch energy spread in order to achieve an excellent collision energy resolution. This paper presents an optimised assignment of RF accelerating gradients and phases in the CLIC main linac for operation at 350 GeV, which minimises the energy spread at the end of the main linac whilst preserving a small emittance growth. Variation of the bunch length and charge is studied in order to further reduce the energy spread; the effect on both the peak and total luminosity is discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP016
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP034	Tuning Studies of the CLIC 380 Gev Final Focus System	sextupole, luminosity, alignment, collider	512
	J. Ögren, A. Latina, D. Schulte, R. Tomás CERN, Meyrin, Switzerland
	We present tuning studies of the Compact Linear Collider final-focus system under static imperfections including transverse misalignments, roll errors and magnetic strength errors. The tuning procedure consists of beam-based alignment for correcting the linear part of the system followed by sextupole pre-alignment and use of multipole tuning knobs. The sextupole pre-alignment is very robust and allows the tuning time to be greatly reduced.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP034
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP038	Investigation of CLIC 380 GeV Post-Collision Line	simulation, site, dipole, collider	528
	R.M. Bodenstein, A. Abramov, S.T. Boogert, P. Burrows, L.J. Nevay JAI, Oxford, United Kingdom D. Schulte, R. Tomás CERN, Meyrin, Switzerland
	It has been proposed that the Compact Linear Collider (CLIC) be commissioned in stages, starting with a lower-energy, 380 GeV version for the first stage, and concluding with a 3 TeV version for the final stage. In the Conceptual Design Report (CDR) published in 2012, the post-collision line is described for the 3 TeV and 500 GeV stages. However, the post-collision line for the 380 GeV design was not investigated. This work will describe the simulation studies performed in BDSIM for the 380 GeV post-collision line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP038
About •	paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB087	High-gradient SRF Cavity R&D at Cornell University	cavity, SRF, collider, vacuum	3017
	M. Ge, T. Gruber, J.J. Kaufman, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Achieving high accelerating field is a critical R&D topic for superconducting RF cavities for future accelerators including the International Linear collider (ILC). The ILC requires an average accelerating field of 35MV/m with a Q₀ of at least 8.9·10⁹ at 2K. In this paper, we report the latest results from high-gradient research at Cornell, which focusses on 75C vacuum baking to improve maximum (quench) fields. We demonstrate that such low temperature bakes can significantly improve quench fields in certain cases by mitigating localized defects. We further report on high-pulsed power results of these cavities before and after baking.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB087
About •	paper received ※ 23 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPGW085

Intensity Dependent Effects in the ILC BDS

wakefield, luminosity, collider, simulation

305

P. Korysko, A. Latina
CERN, Geneva, Switzerland
P. Burrows
Oxford University, Physics Department, Oxford, Oxon, United Kingdom

The International Linear Collider (ILC) is an electron-positron collider being considered for the post-LHC era. Its Beam Delivery System (BDS) receives the beam from the main linac. This beam is then focused to the nanometer scale after going through collimators, beam diagnostic systems, strong magnets, etc. Effects such as wakefields due to resistive-wall, BPMs and collimators make the system very sensitive to the beam intensity. Understanding these effects is crucial in order to demonstrate that the nominal beam size at the Interaction Point (IP) can be reached in realistic scenarios. In this paper, results of the intensity dependence effects in the ILC BDS, simulated with PLACET, are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW085

About •

paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW086

Intensity Dependent Effects at ATF2, KEK

simulation, collider, wakefield, electron

308

P. Korysko, A. Latina
CERN, Geneva, Switzerland
P. Burrows
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
A. Faus-Golfe
LAL, Orsay, France
K. Kubo, T. Okugi
KEK, Ibaraki, Japan

The Accelerator Test Facility 2 (ATF2) at KEK is a prototype for the Final Focus Systems of the future e⁺e⁻ linear colliders, the International Linear Collider (ILC) and the Compact Linear Collider (CLIC). In this paper both simulation and experimental results are presented with special emphasis on intensity-dependent effects. The importance of these effects is shown using the PLACET code and realistic ATF2 machine simulations (including beam jitter, misalignment, wakefield, Beam Based Alignment (BBA) correction, …). The latest experimental results are also presented, in particular the impact of the beam intensity on the beam size at the IP.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW086

About •

paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP016

Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV

linac, luminosity, collider, emittance

458

N. Blaskovic Kraljevic, D. Arominski, D. Schulte
CERN, Meyrin, Switzerland

The first stage of the electron-positron Compact Linear Collider (CLIC) is designed with a centre-of-mass energy of 380 GeV. A dedicated threshold scan in the vicinity of 350 GeV is envisioned with a total integrated luminosity of 100 fb^-1. This scan calls for a very small intra-bunch energy spread in order to achieve an excellent collision energy resolution. This paper presents an optimised assignment of RF accelerating gradients and phases in the CLIC main linac for operation at 350 GeV, which minimises the energy spread at the end of the main linac whilst preserving a small emittance growth. Variation of the bunch length and charge is studied in order to further reduce the energy spread; the effect on both the peak and total luminosity is discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP016

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP034

Tuning Studies of the CLIC 380 Gev Final Focus System

sextupole, luminosity, alignment, collider

512

J. Ögren, A. Latina, D. Schulte, R. Tomás
CERN, Meyrin, Switzerland

We present tuning studies of the Compact Linear Collider final-focus system under static imperfections including transverse misalignments, roll errors and magnetic strength errors. The tuning procedure consists of beam-based alignment for correcting the linear part of the system followed by sextupole pre-alignment and use of multipole tuning knobs. The sextupole pre-alignment is very robust and allows the tuning time to be greatly reduced.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP034

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP038

Investigation of CLIC 380 GeV Post-Collision Line

simulation, site, dipole, collider

528

R.M. Bodenstein, A. Abramov, S.T. Boogert, P. Burrows, L.J. Nevay
JAI, Oxford, United Kingdom
D. Schulte, R. Tomás
CERN, Meyrin, Switzerland

It has been proposed that the Compact Linear Collider (CLIC) be commissioned in stages, starting with a lower-energy, 380 GeV version for the first stage, and concluding with a 3 TeV version for the final stage. In the Conceptual Design Report (CDR) published in 2012, the post-collision line is described for the 3 TeV and 500 GeV stages. However, the post-collision line for the 380 GeV design was not investigated. This work will describe the simulation studies performed in BDSIM for the 380 GeV post-collision line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP038

About •

paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB087

High-gradient SRF Cavity R&D at Cornell University

cavity, SRF, collider, vacuum

3017

M. Ge, T. Gruber, J.J. Kaufman, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Achieving high accelerating field is a critical R&D topic for superconducting RF cavities for future accelerators including the International Linear collider (ILC). The ILC requires an average accelerating field of 35MV/m with a Q₀ of at least 8.9·10⁹ at 2K. In this paper, we report the latest results from high-gradient research at Cornell, which focusses on 75C vacuum baking to improve maximum (quench) fields. We demonstrate that such low temperature bakes can significantly improve quench fields in certain cases by mitigating localized defects. We further report on high-pulsed power results of these cavities before and after baking.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB087

About •

paper received ※ 23 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)