A   B   C   D   E   F   G   H   I   K   L   M   N   O   P   Q   R   S   T   U   V   W    

optics

    
Paper Title Other Keywords Page
MOPKF012 A 7T Multipole Wiggler in BESSY II: Implementation and Commissioning Results wiggler, radiation, vacuum, dynamic-aperture 324
 
  • E. Weihreter, J. Feikes, P. Kuske, R. Müller, G. Wustefeld
    BESSY GmbH, Berlin
  • D. Berger
    HMI, Berlin
  • N.A. Mezentsev, V. Shkaruba
    BINP SB RAS, Novosibirsk
  To generate hard X-ray beams for residual stress analysis and for magnetic scattering with the BESSY II SR source, a 7T wiggler with 17 poles has been implemented. Several problems had to be solved. Wake fields induced by smaller steps in the geometry of the radiation shield inside the beam chamber led to intolerable LHe consumption, which have been analysed numerically and then cured by improving the shield geometry. Much of the routine operation procedures are influenced by the unusually high radiation power level of max. 55 kW. For system protection an interlock system dumps the electron beam automatically in case of relevant error events. This wiggler is by far the strongest perturbation of the linear beam optics, breaking seriously the symmetry of the ring. Beam optical parameters including tune shift and beta beat have been measured to quantify these perturbations and develop efficient cures to limit the negative effects on beam lifetime and dynamic aperture. So far the wiggler is operated at 2.8 T and max. currents up to 250 mA in normal user shifts.  
 
MOPKF044 Wake Fields Effects in the Photoinjector of the SPARC Project emittance, space-charge, impedance, linac 405
 
  • V. Fusco, M. Ferrario, B. Spataro
    INFN/LNF, Frascati (Roma)
  • M.  Migliorati, L. Palumbo
    Rome University La Sapienza, Roma
  When a bunch travels off axis across structures whose shape is not uniform, such as RF cavity or bellows, generates longitudinal and transverse wake fields. In addition transverse time dependent fields (like transverse RF components and wake fields ) may induce correlated slice centroids displacement, so that each slice centroid motion become affected also by space charge forces generated by the next slices. An evaluation of the emittance degradation and induced energy spread in the SPARC injector is performed with an improved version of the code Homdyn and the results are discussed. A comparison with other codes (ABCI, PARMELA 3D) to validate our model is also presented.  
 
MOPKF047 Suppression of Stored Beam Oscillation Excited by Beam Injection injection, sextupole, storage-ring, synchrotron 414
 
  • T. Ohshima, N. Kumagai, M. Masaki, S. Matsui, H. Ohkuma, K. Soutome, M. Takao, H. Tanaka
    JASRI/SPring-8, Hyogo
  Top-up operation is scheduled from May 2004 at SPring-8. For this operation it is important that frequent beam injections should not excite the oscillation of stored beams. However, injection bump orbit was not closed perfectly and residual beam oscillations lead to increase of effective beam sizes by twice and three times in the horizontal and vertical direction respectively. We are trying to reduce these excited oscillations to less than one third of the usual beam sizes. For the suppression of horizontal one, we applied a novel scheme to reduce the effect due to the nonlinearity of sextupole magnets by adjusting the strength ratio of the sextupoles. The field similarity of bump magnets was also improved by replacing them with newly designed ones, where the effect of eddy current at the end plates was reduced. These countermeasures suppressed the horizontal oscillation by about one order. For the suppression of vertical one, the excitation mechanism has being investigated in detail. Presently the tilt angle adjustment of bump magnets reduced the vertical oscillation by one third. For further reduction of these oscillations, corrections with pulse-magnets is under investigation.  
 
MOPKF049 Design Study for a 205 MeV Energy Recovery Linac Test Facility at the KEK linac, emittance, dipole, simulation 420
 
  • E.-S. Kim
    PAL, Pohang
  • K. Yokoya
    KEK, Ibaraki
  We present a lattice and beam dynmics analysis for a 200 MeV energy recovery linac test facility at the KEK. The test facility consists of a photocathode rf gun, a 5 MeV injector, a merger, 200 MeV superconducting linac, TBA sections and beam dump line. Beam parameters and optimal optics to relaize the energy recovery linac are described. Simulation results on emittance growth due to HOMs in the superconducting linac and coherent synchrotron radiation in the designed lattice are presented.  
 
MOPKF078 ERL Upgrade of an Existing X-ray Facility: CHESS at CESR linac, electron, emittance, undulator 497
 
  • G. Hoffstaetter, M. Liepe, R.M. Talman, M. Tigner
    Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
  • I. Bazarov, H. Bilderback, M. Billing, S. Gruner, D. Sagan, C.K. Sinclair
    Cornell University, Department of Physics, Ithaca, New York
  CORNELL has proposed an Energy-Recovery Linac (ERL) based synchrotron-light facility which can provide improved x-ray radiation due to the high beam quality that can be available from a linac. To additionally utilize beam currents that are competitive with ring-based light sources, the linac has to operate with the novel technique of energy recovery, the feasibility of which CORNELL plans to demonstrate in a downscaled prototype ERL. Here we present an ERL upgrade of the existing 2nd generation light source CHESS at CESR. This proposed upgrade suggests how existing storage rings can be extended to ERL light sources with much improved beam qualities.  
 
MOPKF087 The Cebaf Energy Recovery Experiment: Update and Future Plans injection, linac, emittance, diagnostics 524
 
  • A. Freyberger, K. Beard, S.A. Bogacz, Y.-C. Chao, S. Chattopadhyay, D. Douglas, A. Hutton, L. Merminga, C. Tennant, M. Tiefenback
    Jefferson Lab, Newport News, Virginia
  A successful GeV scale energy recovery demonstration with a high ratio of peak-to-injection energies (50:1) was carried out on the CEBAF (Continuous Electron Beam Accelerator Facility) recirculating superconducting linear accelerator in the spring 2003. To gain a quantitative understanding of the beam behavior through the machine, data was taken to characterize the 6D phase space during the CEBAF-ER (CEBAF with Energy Recovery) experimental run. The transverse emittance and energy spread of the accelerating and energy recovered beams were measured in several locations to ascertain the beam quality preservation during energy recovery. Measurements also included the RF system's response to the energy recovery process and transverse beam profile of the energy recovered beam. One of the salient conclusions from the experiment is that the energy recovery process does not contribute significantly to the emittance degradation. The current status of the data analysis will be presented as well as plans for a GeV scale energy recovery experimental run with current doubling.  
 
MOPLT006 The New Layout of the LHC Cleaning Insertions collimation, insertion, impedance, vacuum 539
 
  • R.W. Assmann, O. Aberle, O.S. Brüning, S. Chemli, D. Gasser, J.-B. Jeanneret, J.M. Jimenez, V. Kain, E. Métral, G. Peon, S. Ramberger, C. Rathjen, T. Risselada, F. Ruggiero, L. Vos
    CERN, Geneva
  • D. Kaltchev
    TRIUMF, Vancouver
  The improved LHC collimation system required significant changes in the layout and design of the warm insertion IR7. Requirements for collimation, optics, impedance, vacuum, and additional infrastructure are described and the adopted layout is discussed. Various design principles have been explored during the re-design, ranging from a regular 90 degree lattice and special low impedance lattices to an option with additional warm quadrupole units that could have extended the usable space for collimator installations in the insertion. The various constraints for the optics and cleaning design in the LHC cleaning insertions are summarized. Magnet positions and collimators were moved significantly, such that a good cleaning efficiency was maintained while impedance was reduced by a factor of two. Metallic phase 2 collimators allow a better efficiency than originally achievable and additional scrapers were allocated. The required infrastructure was specified, including a powerful cooling system for the collimators.  
 
MOPLT019 Experience Gained in the SPS for the Future LHC Abort Gap Cleaning injection, betatron, feedback, proton 575
 
  • W. Höfle
    CERN, Geneva
  Abort gap cleaning using a transverse damper (feedback) has been previously shown in the RHIC accelerator. We report on experimental results in the SPS, where the transverse damper was used to excite transverse oscillations on part of an LHC test beam, and by the induced losses, creating a practically particle free zone. It is proposed to use the same principle for abort gap cleaning in the LHC. For the LHC abort gap cleaning may be required at injection energy, during the ramp and at top energy. It is shown how the transverse excitation can be optimized taking into account the actual bandwidth of the damper systems and the possibility to fully modulate their input signal to match the beam batatron tune distribution. The cleaning efficiency and speed is estimated considering the porcesses involved, the cleaning (with damper) and the filling of the abort gap.  
 
MOPLT025 Status and Plans for the SPS to LHC Beam Transfer Lines TI 2 and TI 8 injection, extraction, alignment, quadrupole 593
 
  • V. Mertens, B. Goddard, T. Risselada
    CERN, Geneva
  Beam transfer from the CERN Super Proton Synchrotron (SPS) to the Large Hadron Collider (LHC) will be done through the two transfer lines TI 2 and TI 8, presently under construction, with a combined length of about 5.6 km. The final layout, optics design and correction scheme for these lines will be presented. The requirement of simultaneously matching their geometry and optics with that of the LHC will be treated, including the methodology for alignment of the elements along the line and a proposed solution in the final matching section. After the commissioning of the short transfer line TT40 just upstream of TI 8 in 2003, beam tests of the whole of TI 8 are scheduled for autumn 2004, with the aim to validate many of the new features and mechanisms involved in the future control and operation of these lines. The status of the installation will be described, comprising the progress with infrastructure, services and line elements. An outlook will be given for the work remaining until 2007.  
 
MOPLT044 Longitudinal Positron Polarisation in HERA-II luminosity, collider, proton, quadrupole 644
 
  • E. Gianfelice-Wendt, D.P. Barber, F. Brinker, W. Decking, J. Keil, M. Vogt, F.J. Willeke
    DESY, Hamburg
  Following the installation of two more pairs of spin rotators in the course of the HERA Luminosity Upgrade, longitudinal positron spin polarisation has now been generated simultaneously at all three positron(electron) interaction points in HERA at the routine energy of 27.5 GeV. The maximum attained so far is 54 percent. The theoretical maximum for this configuration and in the presence of realistic errors is 57.0 percent. This is the first time in the history of high energy electron storage ring physics that the naturally occurring vertical polarisation has been, with the aid of spin rotators, converted to longitudinal polarisation at three interaction points simultaneously. We describe the measures needed to attain polarisation in light of the HERA Upgrade and the resulting recent performance.  
 
MOPLT046 Overcoming Performance Limitations due to Synchrobetatron Resonances in the HERA Electron Ring resonance, closed-orbit, betatron, sextupole 650
 
  • F.J. Willeke
    DESY, Hamburg
  The HERA Electron Ring was suffering from strong synchrobetatron resonances which have been particularly detrimental after the HERA luminosity upgrade because of a reduced sychrotron tune due to stronger transverse focusing and a shift in the damping distribution in favor of transverse damping. It turned out to be most difficult to store a beam at the preferred working point for high electron spin polarization between the 2nd and the 3rd synchro-betatron satellite of the horizontal integer resonance. A comparative study of the resonance strength did not reveal any significant additional disadvantage of the new beam optics. However, a mechanism driven by closed orbit distortions was discovered which can increase the width of the resonance Qx+2Qs=0 by a large factor. This explains the operational difficulties. The remedy against this effect is quite straight forward. The Fourier component of the closed orbit near the horizontal tune must be avoided. This is enforced in HERA operations by rigerous orbit corrections and an orbit feedback system which reproduces well-corrected orbits reliably. Synchrobetatron resonances do not constitute a performance limitation of polarized lepton proton collisions in HERA any more.  
 
MOPLT049 A Very High-beta Optics to be used for an Absolute Luminosity Determination with Forward Detectors in ATLAS scattering, luminosity, injection, emittance 659
 
  • A. Faus-Golfe
    IFIC, Valencia
  • I. Efthymiopoulos, P. Grafstrom, M. Rijssenbeek
    CERN, Geneva
  • M. Haguenauer
    Ecole Polytechnique, Palaiseau
  Atlas detector at the LHC pursues a number of different approaches to obtain an estimate of the absolute luminosity. Measuring elastic scattering at very small angles (3 mu rad) represents a different and complimentary approach that will improve the precision of the final luminosity estimate. In this paper we show the required very hihg-beta optics, detector acceptance studies, and running conditions and calculated performance for the proposed forward detectors located near the ATLAS interaction region.  
 
MOPLT050 High-beta and Very High-beta Optics for LHC insertion, quadrupole, scattering, power-supply 662
 
  • A. Faus-Golfe
    IFIC, Valencia
  • A. Verdier
    CERN, Geneva
  New high-beta and very high-beta optics has been sought in order to find the best possible configuration for measuring total cross section in TOTEM and absolute luminosity in ATLAS. They are based on nominal powering scheme of the low-beta triplet. A list of the various possible solution is given in this report. A particularly interesting solution has been found for a case where the phase advance in both planes at the detector location are close to pi/2.  
 
MOPLT147 SPEAR 3 Commissioning Software simulation, storage-ring, insertion, insertion-device 884
 
  • W.J. Corbett, G.J. Portmann, J.A. Safranek, A. Terebilo
    SLAC/SSRL, Menlo Park, California
  In order to meet the tight SPEAR 3 accelerator commissioning schedule, a software package was assembled to streamline experimental measurements and data analysis. At the heart of the software is a MATLAB "middle layer" with an element definition database and channel access link for fast and easy communication with the EPICS control system. Originally adapted from work at the ALS, the middle layer allows direct control from the MATLAB command line, use in the form of short "scripts" for specific experiments and integration into high-level application programs. The revised software is also machine-independent. This paper outlines the software architecture and provide examples with results from the SPEAR 3 accelerator commissioning effort.  
 
TUPLT012 Adjusting the IP Beta-functions in RHIC. quadrupole, lattice, simulation, power-supply 1156
 
  • W. Wittmer, F. Zimmermann
    CERN, Geneva
  • F.C. Pilat, V. Ptitsyn, J. Van Zeijts
    BNL, Upton, Long Island, New York
  The beta- functions at the IP can be adjusted without perturbation of other optics functions via several approaches. In this paper we describe a scheme based on a vector knob, which assigns fixed values to the different tuning quadrupoles and scales them by a common multiplier. The values for the knob vector were calculated for a lattice without any errors using MADX. Previous studies for the LHC have shown that this approach can meet the design goals. A specific feature of the RHIC lattice is the nested power supply system. To cope with the resulting problems a detailed response matrix analysis has been carried out and different sets of knobs were calculated and compared. The knobs are tested at RHIC during the 2004 run and preliminary results maybe discussed. Simultaneously a new approach to measure the beam sizes of both colliding beams at the IP, based on the tune ability provided by the knobs, was developed and tested.  
 
TUPLT013 Calculating LHC Tuning Knobs using Various Methods quadrupole, lattice, storage-ring, closed-orbit 1159
 
  • W. Wittmer, D. Schulte, F. Zimmermann
    CERN, Geneva
  By measuring and adjusting the beta-functions at the IP the luminosity is being optimized. In LEP this was done with the two closest doublet magnets. This approach is not applicable for the LHC due to the asymmetric lattice and common beam pipe through the triplet magnets. To control and change the beta-functions quadrupole groups situated on both sides further away from the IP have to be used where the two beams are already separated. The quadrupoles are excited in specific linear combinations, forming the so-called tuning knobs for the IP beta-functions. We compare the performance of such knobs calculated by different methods: (1) matching in MAD, (2) inversion of the re-sponse matrix and singular value decomposition inversion and conditioning and (3) conditioning the response matrix by multidimensional minimization using Hessian method.  
 
TUPLT019 Nonlinear Effects Studies for a Large Acceptance Collector Ring sextupole, quadrupole, dynamic-aperture, lattice 1177
 
  • A. Dolinskii, K. Beckert, P. Beller, B.  Franzke, F. Nolden, M. Steck
    GSI, Darmstadt
  A large acceptance collector ring (CR) is designed for fast cooling of rare isotope and antiproton beams, which will be used for nuclear physics experiments in the frame of the new international accelerator facility recently proposed at GSI. This contribution describes the linear and non-linear optimisation used to derive a lattice solution with good dynamic behaviour simultaneously meeting the demands for very fast stochastic cooling for two optical modes (for rare isotope and antiproton beams). Effects due to non-linear field contributions of the magnet field in dipoles and quadrupoles are very critical in this ring. Using a single particle dynamics approach, the major magnetic non-linearities of the CR are studied. We discuss the particle dynamics of the dipole and quadrupole fringe fields and the their influence on the dynamic aperture and on the tune. Additionally, the CR will be operated at the transition energy (isochronous mode) for time of flight (TOF) mass spectrometery of short-lived radioactive ions. For this mode a specific correction scheme is required to reach a high degree of isochronism over a large acceptance.  
 
TUPLT022 Beam Dynamics Simulations at the S-DALINAC for the Optimal Position of Beam Energy Monitors simulation, extraction, site, electron 1186
 
  • B. Steiner, W.F.O. Müller, T. Weiland
    TEMF, Darmstadt
  • A. Richter
    TU Darmstadt, Darmstadt
  The S-DALINAC is a 130 MeV superconducting recirculating electron accelerator serving several nuclear and radiation physics experiments as well as driving an infrared free-electron laser. For the experiments an energy stability of 1·10-4 should be reached. Therefore noninvasive beam position monitors will be used to measure the beam energy. For the measurement the different flight time of the electrons to the ideal particle are compared, that means in the simulations the longitudinal dispersion of the beam transport system is used for the energy detection. The results of the simulations show that it is possible to detect an energy difference of 1·10-4 with this method. The results are also proven by measurements.  
 
TUPLT050 Lattice for CELLS lattice, emittance, insertion, insertion-device 1264
 
  • M. Muñoz, D. Einfeld
    CELLS, Bellaterra (Cerdanyola del Vallès)
  The CELLS is an approved project to build a national synchrotron light source in Spain. The main goals of the project are to provide a medium energy machine (3 GeV) with low emittance and top up operation, a circumference of ~280 m and at least 12 straight sections available for experiments. At present, two lattices are being considered. The first one is based in QBA optics and provides and emittance of 5 nm-rad, using existing technologies. The second one is a TBA one, with an emittance of 2 nm, where physical aperture are reduced by at least a factor 2 and gradients in the bending magnets are up to 10 T/m. We present the selected lattice, and review the main beam dynamics (energy acceptance, errors) issues.  
 
TUPLT051 Beam Optical Design of a Multi Charge Ion Recirculator for Charge Breeders ion, quadrupole, dipole, space-charge 1267
 
  • R. Cee, W. Mittig, A.C.C. Villari
    GANIL, Caen
  Ions of high charge states as required for both stable and radioactive beams in order to optimally profit from the existing accelerating voltage can be produced by means of a charge breeder. However, the energy increase obtained is accompanied by an intensity decrease due to the low efficiency of the charge breeding process. With respect to the production of radioactive beams an enhancement of the breeding efficiency would be most desirable to avoid a high power primary beam as yet inevitable to counteract the loss in intensity. For this purpose the beam optics of an ion recirculation capable to separate the desired charge state and to reinject the remaining charge spectrum has been designed. The ions extracted from both sides of the charge breeder are focused by electrostatic quadrupole doublets and bent by two 180° dipole magnets. After one revolution the optics realises horizontally a (1:1) and vertically a (1:-1) point-to-point image independent from the charge state of the ions. The second order geometric aberrations as well as most of the chromatic aberrations vanish.  
 
TUPLT059 Evolution of Optical Asymmetries in the Elettra Storage Ring quadrupole, betatron, storage-ring, sextupole 1288
 
  • F. Iazzourene, S. Di Mitri, E. Karantzoulis, L. Tosi
    ELETTRA, Basovizza, Trieste
  Optical asymmetries have been measured and analyzed, before and after the magnet realignments. One way is to compare theoretical to measured orbit response matrices. Another way is to analyze the measured response matrix itself, by comparing the measured effects at identical optical positions. To evaluate the effects of the sextupoles on the optical asymmetries, the measurements have been performed with the sextupoles ON and OFF. The impact of a partial realignment is also analyzed both by varying the quadrupole excitations as well as by performing dispersion and coupling measurements. The results are presented in this paper.  
 
TUPLT076 Optimization of Sextupole Strengths in a Storage Ring for Top-up Operation sextupole, injection, storage-ring, synchrotron 1330
 
  • H. Tanaka, T. Ohshima, K. Soutome, M. Takao, H. Takebe
    JASRI/SPring-8, Hyogo
  In top-up operation of a light source, electron or positron beams are frequently injected to keep the stored current constant. Closing an injection bump orbit is thus critically important not to disturb precise experiments. However, there are sextupole magnets inside the injection bump in the SPring-8 storage ring and the bump never closes all over the bump amplitude due to the sextupole nonlinearity. To solve the problem, we proposed a scheme based on minimum condition for the injection bump leakage. The scheme only restricts the sextupole strengths within the bump. Introduction of other sextupole families outside the bump can enlarge the dynamic aperture (DA) of the ring with keeping the minimum leakage. To find the best solution, we optimized the sextupole strengths changing the number of sextupole family as a parameter. The simulation shows that addition of two sextupole families sufficiently enlarges DA. Cabling of the sextupole magnets was partly changed in the summer 2003 and the effects of the strength optimization on the bump leakage, injection efficiency and beam lifetime has been investigated experimentally. We present the obtained results compared with the simulations.  
 
TUPLT081 Lattice Design of Large Acceptance FFAGs for the PRISM Project emittance, focusing, lattice, synchrotron 1345
 
  • A. Sato
    Osaka University, Osaka
  • S. Machida
    KEK, Ibaraki
  In order to realize a super muon beam that combines high-intensity, low-energy, narrow energy-spread and high purity, the PRISM project has been proposed. In this project, a FFAG ring is used as a phase rotator. In this paper, a method of designing the PRISM-FFAG lattice will be described. The PRISM-FFAG has to have both of large transverse acceptance and large momentum acceptance to achieve high intensity. Furthermore, long straight sections to install RF cavities are required to obtain a high surviving ratio of the muon. Therefore, the PRISM-FFAG requires its magnets to have large aperture and small opening angle. In such magnets, not only nonlinear effects but also magnetic fringing field are important to study the beam dynamics of FFAGs. Although using realistic 3D magnetic field maps made with programs such as TOSCA is the best solution to study the FFAG dynamics, it takes long time to make such field maps. On a design process of the PRISM-FFAG, quasi-realistic 3D magnetic field maps, which are calculated applying spline interpolation to POISSON 2D field, were used to study the beam dynamics. A program based on GEANT3.21 was used for particle tracking.  
 
TUPLT092 Optics and Magnet Design for Proton Beam Transport Line at PEFP proton, multipole, dipole, extraction 1372
 
  • H.-S. Kang, H.S. Han, S.H. Jeong, Y.G. Jung, D.E. Kim, M. Kim, H.G. Lee, T.-Y. Lee, H.S. Suh
    PAL, Pohang
  The PEFP proton linac is designed to have two proton beam extraction lines at the 20-MeV and 100-MeV end, respectively. Each extraction line has 5 to 6 beamlines for proton beam users. The proton beam transport system for users? experiments will be prepared for this purpose. At the beginning, the beam optics for the proton beam transport system is designed with the TRACE code. The optics should be designed so as to meet the users? various requirements which might be to control the beam size and intensity at the beam target, and the timing of the proton beam. The magnet to distribute the proton beam to many beamlines is an AC magnet which has an AC frequency of 15 Hz, and is powered with a programmable AC power supply. In this paper, the result of the optics design will be presented and the magnet design will be described.  
 
TUPLT172 Measurement of Halo Mitigation Schemes for the Spallation Neutron Source Linac emittance, linac, simulation, beam-losses 1533
 
  • D.-O. Jeon
    ORNL/SNS, Oak Ridge, Tennessee
  A series of emittance measurements were performed at the end of Drift Tube Linac tank 1 of the Spallation Neutron Source to verify experimentally the previously proposed halo generation mechanism and its mitigation schemes [1]. The emittance measurements clearly showed a visible reduction in the halo as well as a significant reduction in the rms emittance when the proposed round beam optics is employed. This confirms experimentally the halo generation mechanism we identified.  
 
TUPLT173 Experimental Test of Transverse Matching Routine for the SNS Linac emittance, linac, beam-losses, quadrupole 1536
 
  • D.-O. Jeon, S. Assadi
    ORNL/SNS, Oak Ridge, Tennessee
  • J. Stovall
    LANL, Los Alamos, New Mexico
  Transverse matching for a high intensity linac was proposed based on minimizing rms emittances. A MATLAB routine was developed and applied during the SNS linac commissioning. The result was also compared with the simulations.  
 
TUPLT177 RHIC Optics Measurements at Different Working Point injection, dipole, quadrupole, closed-orbit 1541
 
  • R. Calaga, M. Bai, S. Peggs, T. Roser, T. Satogata
    BNL, Upton, Long Island, New York
  Working point scans at RHIC were performed during 2004 to determine the effect on lifetime and luminosity. Linear optics were measured for different working point tunes by exciting coherent oscillations with the aid of RHIC AC dipoles. Two methods to measure the beta functions and phases are presented and compared: a conventional technique, and a new method based on singular value decomposition (SVD). The performance of a 3-bump beta wave algorithm to identify quadrupole error sources is also presented.  
 
TUPLT183 Magnetized Beam Transport in Electron Coolers with Opposing Solenoid Fields electron, quadrupole, ion, coupling 1556
 
  • J. Kewisch, C. Montag
    BNL, Upton, Long Island, New York
  To improve cooling capability of electron coolers magnetized beams in strong solenoid fields are used. Too avoid betatron coupling in the ion coupling compensation is required. For the RHIC electron cooler we propose a scheme consisting of two identical solenoids with opposing fields, connected by a quadrupole matching section that preserves the electron beam magnetization. Since the fringe fields of the individual magnets overlap, the matching section can not be designed with standard optics codes. We developed an optimization code based on particle tracking instead. Input for the program are the simulated/measured field maps of the magnets. We demonstrate that the transverse temperature of the electron beam does not increase.  
 
TUPLT191 Transverse Optics Improvements for RHIC Run 4 power-supply, dipole, sextupole, injection 1580
 
  • J. Van Zeijts
    BNL, Upton, Long Island, New York
  The magnetic settings in RHIC are driven by an online model, and the quality of the resulting lattice functions depend on the correctness of the settings, including knowledge of the magnet transfer-functions. Here we first present the different inputs into the online model, including dipole sextupole compenents, used to set tunes and chromaticities along the ramp. Next, based on an analysis of measured tunes and chromaticities along the fy03 polarized proton ramp, we present predictions for quadrupole transfer-function changes. The changes are implemented for the fy04 Au ramp, and we show the improved model agreement for tunes, and chromaticities along the ramp, and measured transverse phase-advance at store. We also describe model improvements for derived observables like the quality of transverse bump closure and observed luminosity ratios between individual interaction points.  
 
WEYLH02 Single Particle Linear and Non-linear Dynamics lattice, quadrupole, closed-orbit, betatron 184
 
  • Y. Cai
    SLAC, Menlo Park, California
  I will give a comprehensive review of existing particle tracking tools to assess long-term particle stability for small and large accelerators in the presence of realistic magnetic imperfections and machine misalignments. The emphasis will be given to the tracking and analysis tools based upon the differential algebra, Lie operator, and "polymorphism". Using these tools, a uniform linear and non-linear analysis will be outlined as an application to the normal form. Finally I will compare simulation results with observations in existing circular accelerators. "Model independent analysis" will be treated as an example for measuring machine optics.  
Video of talk
Transparencies
 
WEPLT046 Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS impedance, quadrupole, betatron, focusing 1939
 
  • F. Zimmermann, G. Arduini, C. Carli
    CERN, Geneva
  Multi-turn beam-position data recorded after beam excitation can be used to extract the betatron-phase advance between adjacent beam position monitors (BPMs) by a harmonic analysis. Performing this treatment for different beam intensities yields the change in phase advance with current. A local impedance contributes to the average tune shift with current, but, more importantly, it also causes a mismatch and phase beating. We describe an attempt to determine the localized impedance around the SPS ring by fitting the measured betatron phase shift with current at all BPMs to the expected impedance response matrix.  
 
WEPLT051 Sub-Picosecond Electron Bunches in the BESSY Storage Ring electron, synchrotron, radiation, storage-ring 1954
 
  • G. Wustefeld, J. Feikes, K. Holldack, P. Kuske
    BESSY GmbH, Berlin
  BESSY is a low emittance, 1.7 Gev electron storage ring. A dedicated, low alpha optics is applied to produce short electron bunches for coherent synchrotron radiation (CSR) in the THz range[*]. By a further detuning of the optics, stable pulses as short as 0.7 ps rms length were produced. The sub-ps pulse shape is analysed by an auto-correlation method of the emitted CSR. The CSR-bursting instability is measured and compared with theory to estimate the current for stable, sub-ps pulses. Present limits of the low alpha optics are discussed.

* M. Abo-Bakr et al., Phys. Rev. Lett. 88, 254801 (2002).

 
 
WEPLT064 2-nd Order Sextupole Effects on the Dynamic Aperture in HERA-e resonance, octupole, sextupole, luminosity 1993
 
  • M. Vogt
    DESY, Hamburg
  During the first year after the luminosity upgrade HERA-e was operated in a mode for which the accessible area in transverse tune space was determined by resonances driven by sextupoles in 2-nd order. It turned out that with typical total incoherent beam beam tune shifts (.05,.08) for 2 IPs this space was too small for stable operation. We have used 2-nd order canonical perturbation theory to analyze the impact of the increased sextupole strengths in the upgraded lattice on the relevant resonance strengths and the detuning. Moreover, we have studied whether it is possible to compensate the resonances with localized octupole schemes (6 or 9 independent magnets) to 1-st and 2-nd order, computed the resulting detuning and compared the results with 6D tracking.  
 
WEPLT068 Momentum Compaction Factor and Nonlinear Dispersion at the ANKA Storage Ring storage-ring, synchrotron, electron, synchrotron-radiation 2005
 
  • A.-S. Müller, A. Ben Kalefa, I. Birkel, E. Huttel, M. Pont, F. Pérez
    FZK-ISS-ANKA, Karlsruhe
  The ANKA electron storage ring operates in the energy range from 0.5 to 2.5 GeV. In order to improve machine performance a precise modelling of linear and nonlinear optics is mandatory. Apart from higher order chromaticity also momentum compaction factor and dispersion have to be controlled. In this framework, the higher order momentum compaction factor has been determined exploiting the extraordinary precision of the resonant spin depolarisation method. Furthermore the nonlinear horizontal dispersion was measured as a function of the momentum deviation for different chromaticities. This paper discusses the experimental results and compares the findings to different simulations.  
 
WEPLT084 Experimental Frequency Maps for the ESRF Storage Ring kicker, resonance, storage-ring, dynamic-aperture 2050
 
  • Y. Papaphilippou, L. Farvacque, E. Plouviez, J.-L. Revol, A. Ropert
    ESRF, Grenoble
  • J. Laskar
    IMCCE, Paris
  • Ch. Skokos
    Academy of Athens, Athens
  Experimental frequency maps have already revealed many unknown characteristics of the ESRF storage ring non-linear dynamics. In the past year, several efforts were undertaken in order to establish this technique as an operational on-line tool. The acquisition time was significantly reduced by collecting data from a dedicated fast BPM system. The problem of beam decoherence was limited by establishing a method for accurate tune determination in a small number of turns, using the information from all the BPMs around the ring. The possibility to explore the off-momentum dynamics by exciting the beam, with synchronous transverse and longitudinal kicks was also investigated. Finally, measurements of resonance driving term amplitudes and phase advances were used to identify the efficiency of resonance corrections.  
 
WEPLT151 Using the PBO LAB(TM) Optimization and Transport Modules to Gain an Improved Understanding of the LLUMC Proton Therapy Beamlines extraction, proton, septum, beam-transport 2191
 
  • G.H. Gillespie, O.V. Voronkova
    G.H. Gillespie Associates, Inc., Del Mar, California
  • G. Coutrakon, J. Hubbard, E. Sanders
    LLU/MC, Loma Linda, California
  The Particle Beam Optics Laboratory (PBO Lab) has an advanced Optimization Module that works in concert with beam optics codes (also modules in PBO Lab) to solve optimization and fitting problems that are difficult or impossible to address with optics code alone. The PBO Lab Optimization Module has been used in conjunction with the TRANSPORT Module to study the beamlines of the proton therapy center at the Loma Linda University Medical Center (LLUMC). The primary goal of the study was to establish a fast, efficient and reliable procedure for determining the parameters of the beam extracted from the synchrotron accelerator that best fit the extensive wire scanner profile data used to monitor the LLUMC proton therapy beamlines. This paper summarizes how the PBO Lab Optimization Module is applied to this problem and presents selected results from the LLUMC proton therapy beamline study.  
 
THOALH02 Development of the Non-invasive Beam-size Monitor using ODR target, electron, radiation, emittance 256
 
  • T. Muto, S. Araki, H. Hayano, V. Karataev, N. Terunuma, J. Urakawa
    KEK, Ibaraki
  • R. Hamatsu
    TMU, Hatioji-shi,Tokyo
  • A. Naumenko, A.P. Potylitsyn
    Tomsk Polytechnic University, Physical-Technical Department, Tomsk
  The beam-size monitor based on Optical Diffraction Radiation (ODR) has been developed at the KEK-ATF. Because of its non-invasive nature, the ODR monitor might be one candidate to measure the extreme-low emittance electron beam for future LC?s and x-ray free electron lasers. To evaluate the beam-size, the angular distribution of the ODR emitted by the beam when crossing a slit in a metallic foil was measured. In the first trial, we observed interference patterns between ODR and backgrounds which may be the synchrotron radiation from most nearest bending magnet at the ATF extracted line. By the installation of the ceramic mask in front of our target, this interference was vanished. And comparing with the result of ODR measurements, we installed the wire scanner in the same position of our monitor. In this paper, we will present developments of the ODR monitor with some experimental results.  
Video of talk
Transparencies
 
THPKF015 Compressed Electron Bunches for THz-Generation - Operating BESSY II in a Dedicated Low Alpha Mode radiation, electron, sextupole, single-bunch 2290
 
  • G. Wustefeld, J. Feikes, K. Holldack, P. Kuske
    BESSY GmbH, Berlin
  For the first time an electron storage ring was operated during regular user shifts in a dedicated 'low alpha' mode, where electron bunches are compressed to 5 times shorter length for THz [*] and short X-ray pulses experiments. The 1 mm rms-long bunches emit powerfull, coherent THz waves, up to 107 times stronger than incoherent radiation. We report on machine set up and operating experience.

* M. Abo-Bakr et al., Phys. Rev. Lett. 88, 254801 (2002)

 
 
THPKF033 Prospects for Long-term Lattice Upgrade at the ESRF emittance, lattice, dipole, quadrupole 2344
 
  • A. Ropert, P. Elleaume, L. Farvacque, Y. Papaphilippou, T. Perron
    ESRF, Grenoble
  Twelve years after commissioning, the ESRF delivers routinely X-rays of brilliance, a factor hundred higher than the design target, to 45 beamlines. Further long-term improvements to the storage ring performance concern the reduction of the horizontal emittance leading to an increase of the brilliance and/or the increase of the number of beamlines from insertion device source points. In this paper, we review the different scenarios that can be envisaged with keeping untouched the existing tunnel and beamlines. Among them, the concept of the Double DBA structure that combines the reduction of emittance (a factor of 8) and the increase of the number of straight sections (64 instead of 32) looks the most attractive. Some of the challenging issues of such a scheme (squeezed space between magnets, innovative combined function magnets of unprecedented small aperture, small dynamic aperture) will be discussed.  
 
THPKF035 Design of the Super-SOR Light Source synchrotron, injection, storage-ring, linac 2350
 
  • N. Nakamura
    ISSP/SRL, Chiba
  The Super-SOR light source is a Japanese VUV and soft X-ray third-generation synchrotron radiation source, which is to be operated for nation-wide and world-wide users. The University of Tokyo has proposed to construct the facility in Kashiwa new campus and we have designed the light source intensively for more than two years. The light source consists of an electron storage ring, booster synchrotron and pre-injector linac. The 1.8-GeV storage ring has a circumference of about 280 m and 14 DBA cells with two 17-m and twelve 6.2-m long straight sections, which are used for twelve insertion devices and RF and injection systems. The booster synchrotron is compact, one third of the ring in circumference, and can achieve a low emittance of about 50 nmrad at 1.8 GeV. The 200-MeV linac is made up of S-band accelerating structures powered by two 50-MW klystrons and a SLED cavity and capable of changing the beam current widely in both single- and multi-bunch operation modes. These accelerators are designed so as to fully meet requirements for top-up injection. We describe the design of the Super-SOR accelerators here.

on behalf of the Super-SOR accelerator design group

 
 
THPKF051 The Status-2004 of the KURCHATOV Center of SR electron, synchrotron, vacuum, radiation 2386
 
  • V. Korchuganov, V. Korchuganov, Y.V. Krylov, V.V. Kvardakov, D.G. Odintsov, V. Ushkov, A.G. Valentinov, Y.L. Yupinov, S.I. Zheludeva
    RRC Kurchatov Institute, Moscow
  • M.V. Kovalchuk
    RAS/A.V.Shubnikov, Moscow
  Kurchatov Synchrotron Radiation Source (KCSR) began the work as a first dedicated synchrotron radiation facility in Russia in 1999. The facility includes two storage rings: 450 MeV SIBERIA-1 and 2.5 GeV SIBERIA-2 and is intended for experiments in the range of SR from VUV up to hard X-ray. Large progress was achieved in increasing SIBERIA-2 stored current during last year. Now maximum current at injection energy is more than 220 mA and it equals to 140 mA at operation energy. The SR dose is rising fast and the life time is also grown because of the outgassing of vacuum chamber by SR. Consequently, after the only one electrons accumulation the work during 24 hours on experimental stations becomes possible with SR beams unbroken. Eight experimental stations with SR beam lines and hutches were mounted and are now in routine operation with SR from bending magnets in experimental hall of Siberia-2. We are installing next beam lines there. SIBERIA-1 also has experimental hall with three beam lines and three experimental stations being in operation. The report describes the current work and the plans on the storage rings. It informs about achieved consumer parameters of an electron beam and status of SR stations.  
 
THPLT020 The DSP-based Betatron Tune Feedback of the Ramped 1.5 GeV Electron Storage Ring BoDo feedback, betatron, power-supply, injection 2511
 
  • B. Keil
    PSI, Villigen
  • K. Wille
    DELTA, Dortmund
  The ramped storage ring BoDo is the full energy injector of the 1.5 GeV synchrotron light source DELTA. All ramped booster magnet power supplies, RF power and beam diagnostics of BoDo are handled by a distributed VME-based DSP (digital signal processor) multiprocessing system developed at DELTA. The VME DSP boards of this system are interconnected by DeltaNet, a novel reflective memory ring network. DeltaNet transmits the measurement data from each DSP board to all other boards in real-time via fibre optic links. The generic hardware and software architecture of the system allows the implementation of different kinds of global real-time feedbacks with correction rates in the range from some 100 Hz to some 10 kHz. This paper presents architecture and performance of a real-time betatron tune feedback that was implemented with the DSP system. The betatron tune is measured and corrected in both planes at a rate of typically 700 Hz for arbitrary beam optics and energy ramps of BoDo. In combination with the global Bodo orbit feedback, the tune feedback increases the performance of Bodo both as an injector and as a testbed for machine studies and newly developed accelerator components.  
 
THPLT042 Automated Orbit Control for the HERA ep Collider electron, luminosity, proton, interaction-region 2574
 
  • S.W. Herb, P.K. Bartkiewicz, F. Brinker, J.M. Maass
    DESY, Hamburg
  Successful operation of the HERA electron-proton collider requires maintaining stable orbits during the typically 12 hour luminosity runs, as well as during the fill and acceleration procedures. The primary sources of orbit errors for the electron ring are the interaction region magnets, whose support structures are integrated with the experimental detectors and susceptible to thermal and magnetic effects. The orbit correction algorithms are designed to correct these effects locally, while operating with somewhat reduced sensitivity on error sources in the rest of the ring. We describe the correction system and our operating experience.  
 
THPLT065 Study of Multiturn Injection at HIMAC Synchrotron injection, simulation, synchrotron, emittance 2640
 
  • T.H. Uesugi, T. Furukawa, T. Naruse, K. Noda
    NIRS, Chiba-shi
  • T. Fujimoto, S. Shibuya
    AEC, Chiba
  In the multiturn injection method at the HIMAC synchrotron, a collapsing speed of the bump orbit was decreased from 200 to 350 microseconds in order to obtain higher intensity beam. The injection line was readjusted to satisfy the optimum condition of multiturn injection method. Furthermore, COD correction and bump-orbit optimization were carried out. On the other hand, in order to prevent the resonance by tune shift and to keep the beam intensity constant, tune survey was carried out. While vertical tune is adjusted, we propose that the method to reduce beam loss after injection by expanding vertical beam size by means of the RF-knockout. This paper describes the improvement of injection at HIMAC synchrotron.  
 
THPLT070 Design and Constriction of Coronagraph for Observation of Beam Halo factory, photon, background, scattering 2655
 
  • T. Mitsuhashi
    KEK, Ibaraki
  The coronagraph is a spatial telescope to observe the sun-corona by artificial eclipse. The concept of this apparatus is to realize the Schlieren-optical system for cutting the bright diffraction fringes in order to observe a less-bright object surrounding the main image such as the sun-corona. We applied this concept for the observation of the surrounding structure (halo, tail) of the beam. Since the background is mainly scattered light come from the objective lens, the key point to observe a less-intense object is to reduce scattering light from objective lens. We used a very well-polished lens (better than scratch and dig 20/20) as objective lens, and succeeded to obtain the signal to background ratio better than 10-5. As a test, we tried to observe the tail of beam by hiding the central peak with artificial eclipse by the coronagraph at Photon Factory storage ring. We succeeded to observe the tail of beam which has an intensity range of 1/104 of the peak intensity.  
 
THPLT091 The Synchrotron Radiation Monitor Upgradation in NSRRC synchrotron, radiation, booster, synchrotron-radiation 2709
 
  • C.H. Kuo, J. Chen, K.-T. Hsu, S.Y. Hsu, Y.-T. Yang
    NSRRC, Hsinchu
  Synchrotron radiation monitor in the storage has been operated for a long time. This system is upgrading to booster operation now. The basic system includes optics, digital image acquisition, image analysis, compressed image transportation and visualization tools at workstation. The linearity and dynamic of new is discussed for some beam physics study. This system is also supported to the booster by new camera and addition operation. The hardware configuration and software structure will be summarized in this report.  
 
THPLT150 Results from Orbit and Optics Improvement by Evaluating the Nonlinear Beam Position Monitor Response in CESR coupling, betatron, closed-orbit, electron 2807
 
  • R.W. Helms, G. Hoffstaetter
    Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
  In the Cornell Electron/positron Storage Ring (CESR), pretzel orbits with large horizontal oscillations are used to keep electron and positron beams out of collision except at the interaction point. Since a beam position monitor's (BPM's) response is only linear near the center of the beam pipe, the assumption of linearity does not allow for accurate orbit and phase measurements under colliding beam conditions. Using a numerical model of the BPMs' response to large offsets of the beam position, and an enhanced algorithm for real-time inversion of this nonlinear response function, we have extended our orbit and betatron phase measurements to beams with large pretzel amplitudes. Several measurements demonstrate the applicability, accuracy, and usefulness of this method.  
 
THPLT166 Development of Injection and Optics Control Applications for the SNS Accumulator Ring injection, linac, quadrupole, sextupole 2849
 
  • S.M. Cousineau, C. Chu, J. Galambos, S. Henderson, T. Pelaia, M. Plum
    ORNL/SNS, Oak Ridge, Tennessee
  • A.L. Leahman
    WSSU, Winston-Salem, North Carolina
  A large suite of physics software applications is being developed to facilitate beam measurement and control in the SNS accumulator ring. Two such applications are an injection control and measurement application, and a ring optics control application. The injection application will handle measurement and control of the linac beam position and angle at the stripper foil, and will be used to measure the twiss parameters of the linac beam at the foil. The optics control application will provide knobs for machine working point, chromaticity, arc phase advance, and harmonic correction. Both applications are written within the standard in-house XAL framework. Presented here are first versions of the applications, along with plans for future development and testing.  
 
THPLT167 SNS Laser Profile Monitor Progress laser, ion, electron, feedback 2852
 
  • W. Blokland, A.V. Aleksandrov, S. Assadi, C. Deibele, W. Grice, S. Henderson, T. Hunter, P. Ladd, G.R. Murdoch, J. Pogge, K. Potter, T.J. Shea, D. Stout
    ORNL/SNS, Oak Ridge, Tennessee
  • V. Alexandrov
    BINP SB RAS, Protvino, Moscow Region
  SNS will use a Nd:YAG laser to measure transverse profiles in the 186-1000 MeV super-conducting LINAC (SCL) and Ti:Sapphire modelock laser to measure longitudinal profiles in the 2.5 MeV Medium Energy Beam Transport (MEBT). The laser beam is scanned across the H- beam to photo-neutralize narrow slices. The liberated electrons are collected to provide a direct measurement of the transverse or longitudinal beam profile. We have successfully measured the transverse profile with a prototype system on the MEBT beam. The final SCL system uses an optical transport line that is installed alongside the 300 meter super-conducting LINAC to deliver laser light at 8 locations. Possible vibrations in the optical transport system can lead to inaccuracies in the profile measurement. We will use an active feedback system on a mirror to correct any vibration up to 2 KHz. In this paper we describe our vibration studies and vibration cancellation system as well as the progress in the design, installation and testing of various subsystems for both the transverse and the longitudinal profiles.  
 
THPLT179 MADX-UAL Suite for Off-line Accelerator Design and Simulation simulation, quadrupole, sextupole, space-charge 2873
 
  • N. Malitsky, R.P. Fliller III, F.C. Pilat, V. Ptitsyn, S. Tepikian, J. Wei
    BNL, Upton, Long Island, New York
  • F. Schmidt
    CERN, Geneva
  • R.M. Talman
    Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
  We present here an accelerator modeling suite that integrates the capability of MADX and UAL packages, based on the Standard eXchange Format (SXF) interface. The resulting environment introduces a one-stop collection of accelerator applications ranging from the lattice design to complex beam dynamics studies. The extended capabilities of the MADX-UAL integrated approach have been tested and effectively used in two accelerator projects: RHIC, where direct comparison of operational and simulated data is possible, and the SNS Accumulator Ring, still in its design phase.  
 
THPLT183 Results from the Commissioning of the NSRL Beam Transfer Line at BNL octupole, target, beam-transport, ion 2879
 
  • N. Tsoupas, S. Bellavia, R. Bonati, K.A. Brown, I.-H. Chiang, C. Gardner, D. Gassner, S. Jao, I. Marneris, A. McNerney, D. Phillips, P. Pile, R. Prigl, A. Rusek, L. Snydstrup
    BNL, Upton, Long Island, New York
  The NASA SPACE RADIATION LABORATORY (NSRL) has started operations at the Brookhaven National Laboratory in 2003. The NSRL facility will be used by NASA to study radiation effects. The NSRL facility utilizes proton and heavy-ion beams of energies from 50 to 3000 MeV/n which are accelerated by the AGS_Booster synchrotron accelerator. The beams were extracted[1] ,and transported to a sample which is located 100 m downstream. To date, protons, 12C, 56Fe, 48Ti ion beams of various magnetic rigidities have been transported to the sample location. The NSRL beam transport line has been designed to employ octupole magnetic elements[2] which transform the normal (Gaussian) beam distribution on the sample into a beam with rectangular cross section, and uniformly distributed over the sample. No beam-collimation is applied along any point of the NSRL beam transport line and the beam focusing on the sample is purely magnetic. The experimental and theoretical horizontal and vertical beam envelopes of the first order optics will be presented. The theoretical beam profiles and uniformities at the location of the sample, when the magnetic octupoles are excited (third order optics), will be compared with the experimentally measured ones.