NAPAC2016 - List of Keywords (luminosity)

Paper	Title	Other Keywords	Page
MOB2CO03	Collider in the Sea: Vision for a 500 TeV World Laboratory	ion, collider, hadron, dipole	13
	P.M. McIntyre, S.P. Bannert, J. Breitschopf, J. Gerity, J.N. Kellams, A. Sattarov Texas A&M University, College Station, USA S. Assadi HiTek ESE LLC, Madison, USA D. Chavez DCI-UG, León, Mexico N. Pogue LLNL, Livermore, California, USA
	A design is presented for a hadron collider in which the magnetic storage ring is configured as a circular pipeline, supported in neutral buoyancy in the sea at a depth of ~100 m. Each collider detector is housed in a bathysphere the size of the CMS hall at LHC, also neutral-buoyant. Each half-cell of the collider lattice is ~300 m long, housed in a single pipe that contains one dipole, one quadrupole, a correction package, and all umbilical connections. A choice of ~4 T dipole field, 2000 km circumference provides a collision energy of 700 TeV. Beam dynamics is dominated by synchrotron radiation damping, which sustains luminosity for >10 hours. Issues of radiation shielding and abort can be accommodated inexpensively. There are at least ten sites world-wide where the collider could be located, all near major urban centers. The paper summarizes several key issues; how to connect and disconnect half-cell segments of the pipeline at-depth using remote submersibles; how to maintain the lattice in the required alignment; provisions for the injector sequence.
	Slides MOB2CO03 [3.440 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB2CO03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB2CO04	Multiphysics Analysis of Crab Cavities for High Luminosity LHC Upgrade	ion, cavity, simulation, electromagnetic-fields	17
	O. Kononenko, Z. Li SLAC, Menlo Park, California, USA R. Calaga, C. Zanoni CERN, Geneva, Switzerland
	Funding: The work is supported by U.S. Department of Energy under Contract No. DE-AC02-76SF00515. Development of the superconducting RF crab cavities is one of the major activities under the high luminosity LHC upgrade project that aims to increase the machine discovery potential. The crab cavities will be used for maximizing and leveling the LHC luminosity hence having tight tolerances for the operating voltage and phase. RF field stability in its turn is sensitive to Lorentz force and external loads, so an accurate modelling of these effects is very important. Using the massively parallel ACE3P simulation suite developed at SLAC, we perform a corresponding multiphysics analysis of the electro-mechanical interactions for the RFD crab cavity design in order to ensure the operational reliability of the LHC crabbing system.
	Slides MOB2CO04 [5.725 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB2CO04
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB3IO02	LHC Operation at 6.5 TeV: Status and Beam Physics Issues	ion, operation, MMI, radiation	37
	G. Papotti, M. Albert, R. Alemany-Fernandez, E. Bravin, G.E. Crockford, K. Fuchsberger, R. Giachino, M. Giovannozzi, G.H. Hemelsoet, W. Höfle, G. Iadarola, D. Jacquet, M. Lamont, D. Nisbet, L. Normann, T. Persson, M. Pojer, L. Ponce, S. Redaelli, B. Salvachua, M. Solfaroli Camillocci, R. Suykerbuyk, J. Wenninger CERN, Geneva, Switzerland
	LHC operation restarted in 2015 after the first Long Shutdown, planning for a 4-year long run until the end of 2018 (called Run 2). The beam energy was fixed at 6.5 TeV. The year 2015 was dedicated to establishing operation at the high energy and with 25 ns beams, in order to prepare production for the following three years. The year 2016 was the first one dedicated to production, and it turned out to be a record-breaking year, in which the goals in both peak and integrated luminosities with proton-proton beams were achieved and surpassed. This paper revisits 2015 and 2016, shortly highlighting the main facts in the timelines, recalling the parameters that characterized luminosity production, and sketching the main limitations and the main highlights of results for selected topics, including a particular focus on the beam physics issues.
	Slides MOB3IO02 [15.183 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB3IO02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB3CO03	RHIC Au-Au Operation at 100 GeV in Run16	ion, operation, cavity, electron	42
	X. Gu, J.G. Alessi, E.N. Beebe, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, J.J. Butler, R. Connolly, T. D'Ottavio, K.A. Drees, W. Fischer, C.J. Gardner, D.M. Gassner, Y. Hao, M. Harvey, T. Hayes, H. Huang, R.L. Hulsart, P.F. Ingrassia, J.P. Jamilkowski, J.S. Laster, V. Litvinenko, C. Liu, Y. Luo, M. Mapes, G.J. Marr, A. Marusic, G.T. McIntyre, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, C. Naylor, S. Nemesure, I. Pinayev, V.H. Ranjbar, D. Raparia, G. Robert-Demolaize, T. Roser, P. Sampson, J. Sandberg, V. Schoefer, F. Severino, T.C. Shrey, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, J.E. Tuozzolo, G. Wang, Q. Wu, A. Zaltsman, K. Zeno, S.Y. Zhang, W. Zhang BNL, Upton, Long Island, New York, USA
	In order to achieve higher instantaneous and integrated luminosities, the average Au bunch intensity in RHIC has been increased by 30% compared to the preceding Au run. This increase was accomplished by merging bunches in the RHIC injector AGS. Luminosity leveling for one of the two interaction points (IP) with collisions was realized by continuous control of the vertical beam separation. Parallel to RHIC physics operation, the electron beam commissioning of a novel cooling technique with potential application in eRHIC, Coherent electron Cooling as a proof of principle (CeCPoP), was carried out. In addition, a 56 MHz superconducting RF cavity was commissioned and made operational. In this paper we will focus on the RHIC performance during the 2016 Au-Au run.
	Slides MOB3CO03 [2.173 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB3CO03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB4IO02	ERL-Ring and Ring-Ring Designs for the eRHIC Electron-Ion Collider	ion, electron, proton, linac	64
	V. Ptitsyn BNL, Upton, Long Island, New York, USA
	An overview of the eRHIC project.
	Slides MOB4IO02 [6.001 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB4IO02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOB07	Considerations on Energy Frontier Colliders After LHC	ion, collider, plasma, hadron	493
	V.D. Shiltsev Fermilab, Batavia, Illinois, USA
	The future of the world-wide HEP community critically depends on the feasibility of possible post-LHC colliders. The concept of the feasibility is complex and includes at least three factors: feasibility of energy, feasibility of luminosiity and feasibility of cost. The talk will give on overview of all current options for post-LHC colliders from such perspective (ILC, CLIC, Muon Collider, plasma colliders, CEPC, FCC, HE-LHC, etc) and discuss major challenges and accelerator R&D required to claim these machines feasible.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOB07
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOB56	The eRHIC Ring-Ring Design	ion, electron, proton, dipole	616
	C. Montag, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A.V. Fedotov, W. Fischer, Y. Hao, A. Hershcovitch, Y. Luo, R.B. Palmer, B. Parker, S. Peggs, V. Ptitsyn, V.H. Ranjbar, S. Seletskiy, T.V. Shaftan, V.V. Smaluk, S. Tepikian, F.J. Willeke, H. Witte, Q. Wu BNL, Upton, Long Island, New York, USA
	The ring-ring version of the eRHIC electron-ion collider design aims at providing electron-proton collisions with a center-of-mass energy ranging from 32 to 141 GeV at a luminosity reaching 10³³ cm^-2 sec^-1. This design of the double-ring collider also supports electron-ion collisions with similar electron-nucleon luminosities, and is upgradeable to 10³⁴ cm^-2 sec^-1 using bunched beam electron cooling of the hadron beam. The baseline luminosities are achievable using existing technologies and beam parameters that have been routinely achieved at RHIC in hadron-hadron collisions or elsewhere in e⁺e⁻ collisions. This minimizes the risk associated with the challenging luminosity goal and is keeping the technical risk of the e-RHIC electron-ion collider low. The latest design status will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOB56
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEB3IO02	First Test Results of the 150 mm Aperture IR Quadrupole Models for the High Luminosity LHC	ion, quadrupole, dipole, alignment	853
	G. Ambrosio, G. Chlachidze Fermilab, Batavia, Illinois, USA P. Ferracin CERN, Geneva, Switzerland G.L. Sabbi LBNL, Berkeley, California, USA P. Wanderer BNL, Upton, Long Island, New York, USA
	Funding: Work supported by the US Department of Energy through the US LHC Accelerator Research Program (LARP) and by the High Luminosity LHC project at CERN. The High Luminosity upgrade of the LHC at CERN will use large aperture (150 mm) quadrupole magnets to focus the beams at the interaction points. The high field in the coils requires Nb3Sn superconductor technology, which has been brought to maturity by the LHC Accelerator Research Program (LARP) over the last 10 years. The key design targets for the new IR quadrupoles were established in 2012, and fabrication of model magnets started in 2014. This paper discusses the results from the first single short coil test and from the first short quadrupole model test. Remaining challenges and plans to address them are also presented and discussed.
	Slides WEB3IO02 [15.312 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEB3IO02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THA2IO01	Specifics of Electron Dynamics in High Energy Circular e⁺e⁻ Colliders	ion, collider, sextupole, impedance	1071
	Q. Qin, J. Gao, H. Geng, P. He, D. Wang, N. Wang, Y. Wang, Y. Zhang IHEP, Beijing, People's Republic of China
	At the energies envisioned for the FCC-ee the synchrotron radiation produces not only closed orbit effects but also some dynamics effects including strong "beta-synchrotron" coupling due to radiation in the final focus quadrupoles. Past experience with LEP and other machines as well as the implications for the new wave of circular electron collider proposals will be discussed.
	Slides THA2IO01 [6.536 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-THA2IO01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOA53	Luminosity Increase in Laser-Compton Scattering by Crab Crossing Method	ion, electron, laser, photon	1213
	Y. Koshiba, D. Igarashi, S. Ota, T. Takahashi, M. Washio RISE, Tokyo, Japan K. Sakaue Waseda University, Waseda Institute for Advanced Study, Tokyo, Japan J. Urakawa KEK, Ibaraki, Japan
	In collider experiments such as KEKB, crab crossing method is a promising way to increase the luminosity and KEK (High Energy Accelerator Research Organization) has achieved the luminosity record in 2009. We are planning to apply crab crossing to laser-Compton scattering, which is a collision of electron beam and laser, to gain a higher luminosity leading to a higher brightness X-ray source. It is well known that the collision angle between electron beam and laser affects the luminosity. It is the best when the collision angle is zero, head-on collision, to get a higher luminosity but difficult to construct such system especially when using an optical cavity for laser. Concerning this difficulty, we are planning crab crossing by tilting the electron beam using an rf-deflector. Although crab crossing in laser-Compton scattering has been already proposed, nowhere has demonstrated yet. We are going to demonstrate and conduct experimental study at our compact accelerator system in Waseda University. In this conference, we will report about our compact accelerator system, laser system for laser-Compton scattering, and expected results of crab crossing laser-Compton scattering. V. Alessandro, et al. "Luminosity optimization schemes in Compton experiments based on Fabry-Perot optical resonators." Physical Review Special Topics-Accelerators and Beams 14.3 (2011): 031001.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-THPOA53
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOB2CO03

Collider in the Sea: Vision for a 500 TeV World Laboratory

ion, collider, hadron, dipole

13

P.M. McIntyre, S.P. Bannert, J. Breitschopf, J. Gerity, J.N. Kellams, A. Sattarov
Texas A&M University, College Station, USA
S. Assadi
HiTek ESE LLC, Madison, USA
D. Chavez
DCI-UG, León, Mexico
N. Pogue
LLNL, Livermore, California, USA

A design is presented for a hadron collider in which the magnetic storage ring is configured as a circular pipeline, supported in neutral buoyancy in the sea at a depth of ~100 m. Each collider detector is housed in a bathysphere the size of the CMS hall at LHC, also neutral-buoyant. Each half-cell of the collider lattice is ~300 m long, housed in a single pipe that contains one dipole, one quadrupole, a correction package, and all umbilical connections. A choice of ~4 T dipole field, 2000 km circumference provides a collision energy of 700 TeV. Beam dynamics is dominated by synchrotron radiation damping, which sustains luminosity for >10 hours. Issues of radiation shielding and abort can be accommodated inexpensively. There are at least ten sites world-wide where the collider could be located, all near major urban centers. The paper summarizes several key issues; how to connect and disconnect half-cell segments of the pipeline at-depth using remote submersibles; how to maintain the lattice in the required alignment; provisions for the injector sequence.

Slides MOB2CO03 [3.440 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB2CO03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB2CO04

Multiphysics Analysis of Crab Cavities for High Luminosity LHC Upgrade

ion, cavity, simulation, electromagnetic-fields

17

O. Kononenko, Z. Li
SLAC, Menlo Park, California, USA
R. Calaga, C. Zanoni
CERN, Geneva, Switzerland

Funding: The work is supported by U.S. Department of Energy under Contract No. DE-AC02-76SF00515.
Development of the superconducting RF crab cavities is one of the major activities under the high luminosity LHC upgrade project that aims to increase the machine discovery potential. The crab cavities will be used for maximizing and leveling the LHC luminosity hence having tight tolerances for the operating voltage and phase. RF field stability in its turn is sensitive to Lorentz force and external loads, so an accurate modelling of these effects is very important. Using the massively parallel ACE3P simulation suite developed at SLAC, we perform a corresponding multiphysics analysis of the electro-mechanical interactions for the RFD crab cavity design in order to ensure the operational reliability of the LHC crabbing system.

Slides MOB2CO04 [5.725 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB2CO04

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB3IO02

LHC Operation at 6.5 TeV: Status and Beam Physics Issues

ion, operation, MMI, radiation

37

G. Papotti, M. Albert, R. Alemany-Fernandez, E. Bravin, G.E. Crockford, K. Fuchsberger, R. Giachino, M. Giovannozzi, G.H. Hemelsoet, W. Höfle, G. Iadarola, D. Jacquet, M. Lamont, D. Nisbet, L. Normann, T. Persson, M. Pojer, L. Ponce, S. Redaelli, B. Salvachua, M. Solfaroli Camillocci, R. Suykerbuyk, J. Wenninger
CERN, Geneva, Switzerland

LHC operation restarted in 2015 after the first Long Shutdown, planning for a 4-year long run until the end of 2018 (called Run 2). The beam energy was fixed at 6.5 TeV. The year 2015 was dedicated to establishing operation at the high energy and with 25 ns beams, in order to prepare production for the following three years. The year 2016 was the first one dedicated to production, and it turned out to be a record-breaking year, in which the goals in both peak and integrated luminosities with proton-proton beams were achieved and surpassed. This paper revisits 2015 and 2016, shortly highlighting the main facts in the timelines, recalling the parameters that characterized luminosity production, and sketching the main limitations and the main highlights of results for selected topics, including a particular focus on the beam physics issues.

Slides MOB3IO02 [15.183 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB3IO02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB3CO03

RHIC Au-Au Operation at 100 GeV in Run16

ion, operation, cavity, electron

42

X. Gu, J.G. Alessi, E.N. Beebe, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, J.J. Butler, R. Connolly, T. D'Ottavio, K.A. Drees, W. Fischer, C.J. Gardner, D.M. Gassner, Y. Hao, M. Harvey, T. Hayes, H. Huang, R.L. Hulsart, P.F. Ingrassia, J.P. Jamilkowski, J.S. Laster, V. Litvinenko, C. Liu, Y. Luo, M. Mapes, G.J. Marr, A. Marusic, G.T. McIntyre, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, C. Naylor, S. Nemesure, I. Pinayev, V.H. Ranjbar, D. Raparia, G. Robert-Demolaize, T. Roser, P. Sampson, J. Sandberg, V. Schoefer, F. Severino, T.C. Shrey, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, J.E. Tuozzolo, G. Wang, Q. Wu, A. Zaltsman, K. Zeno, S.Y. Zhang, W. Zhang
BNL, Upton, Long Island, New York, USA

In order to achieve higher instantaneous and integrated luminosities, the average Au bunch intensity in RHIC has been increased by 30% compared to the preceding Au run. This increase was accomplished by merging bunches in the RHIC injector AGS. Luminosity leveling for one of the two interaction points (IP) with collisions was realized by continuous control of the vertical beam separation. Parallel to RHIC physics operation, the electron beam commissioning of a novel cooling technique with potential application in eRHIC, Coherent electron Cooling as a proof of principle (CeCPoP), was carried out. In addition, a 56 MHz superconducting RF cavity was commissioned and made operational. In this paper we will focus on the RHIC performance during the 2016 Au-Au run.

Slides MOB3CO03 [2.173 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB3CO03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOB4IO02

ERL-Ring and Ring-Ring Designs for the eRHIC Electron-Ion Collider

ion, electron, proton, linac

64

V. Ptitsyn
BNL, Upton, Long Island, New York, USA

An overview of the eRHIC project.

Slides MOB4IO02 [6.001 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-MOB4IO02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOB07

Considerations on Energy Frontier Colliders After LHC

ion, collider, plasma, hadron

493

V.D. Shiltsev
Fermilab, Batavia, Illinois, USA

The future of the world-wide HEP community critically depends on the feasibility of possible post-LHC colliders. The concept of the feasibility is complex and includes at least three factors: feasibility of energy, feasibility of luminosiity and feasibility of cost. The talk will give on overview of all current options for post-LHC colliders from such perspective (ILC, CLIC, Muon Collider, plasma colliders, CEPC, FCC, HE-LHC, etc) and discuss major challenges and accelerator R&D required to claim these machines feasible.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOB07

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOB56

The eRHIC Ring-Ring Design

ion, electron, proton, dipole

616

C. Montag, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A.V. Fedotov, W. Fischer, Y. Hao, A. Hershcovitch, Y. Luo, R.B. Palmer, B. Parker, S. Peggs, V. Ptitsyn, V.H. Ranjbar, S. Seletskiy, T.V. Shaftan, V.V. Smaluk, S. Tepikian, F.J. Willeke, H. Witte, Q. Wu
BNL, Upton, Long Island, New York, USA

The ring-ring version of the eRHIC electron-ion collider design aims at providing electron-proton collisions with a center-of-mass energy ranging from 32 to 141 GeV at a luminosity reaching 10³³ cm^-2 sec^-1. This design of the double-ring collider also supports electron-ion collisions with similar electron-nucleon luminosities, and is upgradeable to 10³⁴ cm^-2 sec^-1 using bunched beam electron cooling of the hadron beam. The baseline luminosities are achievable using existing technologies and beam parameters that have been routinely achieved at RHIC in hadron-hadron collisions or elsewhere in e⁺e⁻ collisions. This minimizes the risk associated with the challenging luminosity goal and is keeping the technical risk of the e-RHIC electron-ion collider low. The latest design status will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-TUPOB56

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEB3IO02

First Test Results of the 150 mm Aperture IR Quadrupole Models for the High Luminosity LHC

ion, quadrupole, dipole, alignment

853

G. Ambrosio, G. Chlachidze
Fermilab, Batavia, Illinois, USA
P. Ferracin
CERN, Geneva, Switzerland
G.L. Sabbi
LBNL, Berkeley, California, USA
P. Wanderer
BNL, Upton, Long Island, New York, USA

Funding: Work supported by the US Department of Energy through the US LHC Accelerator Research Program (LARP) and by the High Luminosity LHC project at CERN.
The High Luminosity upgrade of the LHC at CERN will use large aperture (150 mm) quadrupole magnets to focus the beams at the interaction points. The high field in the coils requires Nb3Sn superconductor technology, which has been brought to maturity by the LHC Accelerator Research Program (LARP) over the last 10 years. The key design targets for the new IR quadrupoles were established in 2012, and fabrication of model magnets started in 2014. This paper discusses the results from the first single short coil test and from the first short quadrupole model test. Remaining challenges and plans to address them are also presented and discussed.

Slides WEB3IO02 [15.312 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEB3IO02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THA2IO01

Specifics of Electron Dynamics in High Energy Circular e⁺e⁻ Colliders

ion, collider, sextupole, impedance

1071

Q. Qin, J. Gao, H. Geng, P. He, D. Wang, N. Wang, Y. Wang, Y. Zhang
IHEP, Beijing, People's Republic of China

At the energies envisioned for the FCC-ee the synchrotron radiation produces not only closed orbit effects but also some dynamics effects including strong "beta-synchrotron" coupling due to radiation in the final focus quadrupoles. Past experience with LEP and other machines as well as the implications for the new wave of circular electron collider proposals will be discussed.

Slides THA2IO01 [6.536 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-THA2IO01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOA53

Luminosity Increase in Laser-Compton Scattering by Crab Crossing Method

ion, electron, laser, photon

1213

Y. Koshiba, D. Igarashi, S. Ota, T. Takahashi, M. Washio
RISE, Tokyo, Japan
K. Sakaue
Waseda University, Waseda Institute for Advanced Study, Tokyo, Japan
J. Urakawa
KEK, Ibaraki, Japan

In collider experiments such as KEKB, crab crossing method is a promising way to increase the luminosity and KEK (High Energy Accelerator Research Organization) has achieved the luminosity record in 2009. We are planning to apply crab crossing to laser-Compton scattering, which is a collision of electron beam and laser, to gain a higher luminosity leading to a higher brightness X-ray source. It is well known that the collision angle between electron beam and laser affects the luminosity. It is the best when the collision angle is zero, head-on collision, to get a higher luminosity but difficult to construct such system especially when using an optical cavity for laser. Concerning this difficulty, we are planning crab crossing by tilting the electron beam using an rf-deflector. Although crab crossing in laser-Compton scattering has been already proposed*, nowhere has demonstrated yet. We are going to demonstrate and conduct experimental study at our compact accelerator system in Waseda University. In this conference, we will report about our compact accelerator system, laser system for laser-Compton scattering, and expected results of crab crossing laser-Compton scattering.
*V. Alessandro, et al. "Luminosity optimization schemes in Compton experiments based on Fabry-Perot optical resonators." Physical Review Special Topics-Accelerators and Beams 14.3 (2011): 031001.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-THPOA53

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)