MEDSI2023 - List of Keywords (software)

Paper	Title	Other Keywords	Page
TUPYP028	Thermal Analysis Software for Optical Elements of Hefei Advanced Light Facility*	optics, interface, synchrotron, radiation	73
	M.H. Lin, J. Chen, S.K. Jiang, Q.P. Wang, Z. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Thermal deformation is a key influencing factor in the surface shape of optical components for beamline optics. In the process of beamline design, it is necessary not only to select different cooling schemes based on thermal loading conditions but also to extensively optimize the parameters of these cooling schemes. The traditional approach for optimizing cooling scheme design often requires significant manual effort. By integrating existing experience in optimizing cooling scheme designs, this study transforms the parameterized design tasks that were originally performed manually into automated processes using software. This paper presents the latest advancements in the automated design software for cooling schemes of beamline optical components, and the results indicate that the optimization outcomes of the existing automated design software are close to those achieved through manual optimization.
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP028
About •	Received ※ 01 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPYP053	Current Status of Vibration Monitoring System at SOLARIS	operation, storage-ring, synchrotron, monitoring	111
	M. Piszak NSRC SOLARIS, Kraków, Poland
	Solaris synchrotron radiation centre, despite being relatively new facility, began expansion of its experimental hall in 2022 in order to accommodate new beamlines. The construction works were carried out along with regular accelerators and beamlines operation and generated high levels of vibration. To better understand the influence of vibrations on electron and x-ray beams¿ stability, an accelerometer-based monitoring system was designed and implemented. The system consists of a triaxial measurement point equipped with seismic accelerometers located on bending magnet inside storage ring and a central signal conditioning and acquisition point. The results of long-term vibration data collection and analysis will be presented along with plans for the future system expansion.
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP053
About •	Received ※ 25 October 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 12 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAM03	Magnetic Levitation on a Budget: A Student Discount	controls, simulation, ISOL, coupling	125
	J.H. Kelly, D. Crivelli, S. Farrelly, M.L. Hurlstone DLS, Oxfordshire, United Kingdom
	The successful mechatronics development i.e. modelling, simulation, design, build and test of a magnetic levitation stage at the Diamond Light Source is presented. The concept was to use a low control Bandwidth across the 6 degree of freedom MIMO system, to provide both an alignment stage and vibration isolation. The project simultaneously upskilled staff and developed a proof-of-concept system demonstrator at a low cost. The final motion stage was constructed for a component cost of less than £15,000.
	Slides WEOAM03 [6.344 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOAM03
About •	Received ※ 31 October 2023 — Revised ※ 04 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 11 November 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBM03	The Design and Progress of the Network and Computing System for HEPS	data-analysis, network, data-management, synchrotron	139
	H. Hu, Y.S. Cheng, Q. Hu, Y. Hu, F.Z. Qi, X.H. Wang, S. Zeng, H.M. Zhang IHEP, Bejing, People’s Republic of China
	The 14 beamlines for the phase I of High Energy Photon Source(HEPS) will produces more than 300PB/year raw data. Efficiently storing, analyzing, and sharing this huge amount of data presents a significant challenge for HEPS. HEPS Computing and Communication System(HEPSCC), also called HEPS Computing Center, is an essential work group responsible for the IT R&D and services for the facility, including IT infrastructure, network, computing, analysis software, data preservation and management, public services etc. Aimed at addressing the significant challenge of large data volume, HEPSCC has designed and established a network and computing system, making great progress over the past two years.
	Slides WEOBM03 [2.921 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOBM03
About •	Received ※ 27 October 2023 — Revised ※ 06 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 09 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAM02	SmarGon MCS2: An Enhanced Multi-Axis Goniometer with a New Control System	controls, operation, interface, synchrotron	247
	W. Glettig, D. Buntschu, E.H. Panepucci, M. Wang PSI, Villigen PSI, Switzerland A. Omelcenko SmarAct, Oldenburg, Germany
	As an improvement on the commercially available SmarGon multi-axis goniometer (SmarAct GmbH), the MX Group at the Paul Scherrer Institute (PSI) has been pursuing further development of the system. In addition to suggesting mechanical improvements to SmarAct to improve ruggedness and reliability, PSI has developed a brand-new and flexible control system for better customization, reliability and control. Calibration routines were implemented to reduce systemic errors, and the system has been tailored for practical beamline usage. SmarGon is a six degree-of-freedom positioning device, allowing positioning of a sample and orientation around any given point, with <5um sphere of confusion diameter. It was purpose-built for protein-crystallography experiments but, as will be presented here, was also re-purposed for other applications. Two devices have been in continuous 24/7 use for two years at the MX Beamlines PXI & PXII at SLS.
	Slides THOAM02 [77.940 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOAM02
About •	Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 10 November 2023 — Issued ※ 08 January 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAM05	Modeling the Disturbances and the Dynamics of the New Micro CT Station for the MOGNO Beamline at Sirius/LNLS	experiment, synchrotron, GUI, detector	256
	G.S. Baldon, F. Ferracioli, R.R. Geraldes, G.B.Z.L. Moreno, G.S. de Albuquerque LNLS, Campinas, Brazil
	Funding: Ministry of Science, Technology and Innovation (MCTI) At the 4th generation synchrotron laboratory Sirius at the Brazilian Synchrotron Light Laboratory (LNLS), MOGNO is a high energy imaging beamline, whose Nano Computed Tomography (CT) station is already in operation. The beamline’s 120x120 nm focus size, 3.1x3.1 mrad beam divergence, and 9·10¹¹ ph/s flux at 22-67 keV energy, allows experiments with better temporal and spatial resolution than lower energy and lower stability light sources. To further utilize its potential, a new Micro CT station is under development to perform experiments with 0.5-55 um resolution, and up to 4 Hz sample rotation. To achieve this, a model of the disturbances affecting the station was developed, which comprised: i) the characterization and simulation of disturbances, such as rotation forces; and ii) the modeling of the dynamics of the Micro-station. The dynamic model was built with the in-house developed Dynamic Error Budgeting Tool, which uses dynamic substructuring to model 6 degrees of freedom rigid body systems. This work discusses the tradeoffs between rotation-related parameters affecting the sample to optics stability and the experiment resolution in the frequency domain integrated up to 2kHz. N. L. Archilha, et al. 2022, J. Phys.: Conf. Ser. 2380 012123. ** R. R. Geraldes et al. 2022, Precision Engineering Vol. 77, 90-103.
	Slides THOAM05 [11.814 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOAM05
About •	Received ※ 02 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 04 March 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOBM02	First Results of a New Hydrostatic Leveling System on Test Procedures at Sirius	monitoring, operation, ISOL, alignment	261
	W.R. Heinrich, G.R.S. Gama, G.J. Montagner, S.P. Oliveira, E. Teixeira SETUP, Campinas, Brazil R.B. Cardoso, L.R. Leão, S.R. Marques CNPEM, Campinas, SP, Brazil R.T. Neuenschwander LNLS, Campinas, Brazil
	Funding: FAPESP - Research Support Foundation of the State of Sao Paulo FINEP - Financier of Studies and Projects Program PIPE/PAPPE Subsidy - Phase 3 Process IDs: 2016/50070-3 and 2016/50522-1 The Hydrostatic Leveling System (HLS) is commonly employed in Structural Health Monitoring (SHM) to anticipate issues in large-scale structures. Particularly in structures like particle accelerators, it is used in high-precision alignment, where small differences in elevation such as terrestrial tides, could affect machine operation. This study outlines the development and evaluation of the first HLS based in Linear Variable Differential Transformer (LVDT) and were used to monitor the structure at LNLS/CNPEM, Brazil, from 2020 to 2023. A comparative analysis with a capacitance-based off-the-shelf HLS was executed, and experimental data analyzed through Fast Fourier Transform (FFT) confirmed the presence of tidal components in both HLS¿s data. Additionally, the correlation between level and temperature data was demonstrated by Pearson coefficient. The Setup-HLS device, developed with support from Brazilian national resources, exhibited accurate measurements in building tilt and diurnal and semi-diurnal Earth tide variations. Future researches include a calibration jig and an online verification system. This research provides a viable alternative to existing HLS systems.
	Slides THOBM02 [10.405 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOBM02
About •	Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 12 March 20244
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

TUPYP028

Thermal Analysis Software for Optical Elements of Hefei Advanced Light Facility*

optics, interface, synchrotron, radiation

73

M.H. Lin, J. Chen, S.K. Jiang, Q.P. Wang, Z. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Thermal deformation is a key influencing factor in the surface shape of optical components for beamline optics. In the process of beamline design, it is necessary not only to select different cooling schemes based on thermal loading conditions but also to extensively optimize the parameters of these cooling schemes. The traditional approach for optimizing cooling scheme design often requires significant manual effort. By integrating existing experience in optimizing cooling scheme designs, this study transforms the parameterized design tasks that were originally performed manually into automated processes using software. This paper presents the latest advancements in the automated design software for cooling schemes of beamline optical components, and the results indicate that the optimization outcomes of the existing automated design software are close to those achieved through manual optimization.

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP028

About •

Received ※ 01 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPYP053

Current Status of Vibration Monitoring System at SOLARIS

operation, storage-ring, synchrotron, monitoring

111

M. Piszak
NSRC SOLARIS, Kraków, Poland

Solaris synchrotron radiation centre, despite being relatively new facility, began expansion of its experimental hall in 2022 in order to accommodate new beamlines. The construction works were carried out along with regular accelerators and beamlines operation and generated high levels of vibration. To better understand the influence of vibrations on electron and x-ray beams¿ stability, an accelerometer-based monitoring system was designed and implemented. The system consists of a triaxial measurement point equipped with seismic accelerometers located on bending magnet inside storage ring and a central signal conditioning and acquisition point. The results of long-term vibration data collection and analysis will be presented along with plans for the future system expansion.

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP053

About •

Received ※ 25 October 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 12 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAM03

Magnetic Levitation on a Budget: A Student Discount

controls, simulation, ISOL, coupling

125

J.H. Kelly, D. Crivelli, S. Farrelly, M.L. Hurlstone
DLS, Oxfordshire, United Kingdom

The successful mechatronics development i.e. modelling, simulation, design, build and test of a magnetic levitation stage at the Diamond Light Source is presented. The concept was to use a low control Bandwidth across the 6 degree of freedom MIMO system, to provide both an alignment stage and vibration isolation. The project simultaneously upskilled staff and developed a proof-of-concept system demonstrator at a low cost. The final motion stage was constructed for a component cost of less than £15,000.

Slides WEOAM03 [6.344 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOAM03

About •

Received ※ 31 October 2023 — Revised ※ 04 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 11 November 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBM03

The Design and Progress of the Network and Computing System for HEPS

data-analysis, network, data-management, synchrotron

139

H. Hu, Y.S. Cheng, Q. Hu, Y. Hu, F.Z. Qi, X.H. Wang, S. Zeng, H.M. Zhang
IHEP, Bejing, People’s Republic of China

The 14 beamlines for the phase I of High Energy Photon Source(HEPS) will produces more than 300PB/year raw data. Efficiently storing, analyzing, and sharing this huge amount of data presents a significant challenge for HEPS. HEPS Computing and Communication System(HEPSCC), also called HEPS Computing Center, is an essential work group responsible for the IT R&D and services for the facility, including IT infrastructure, network, computing, analysis software, data preservation and management, public services etc. Aimed at addressing the significant challenge of large data volume, HEPSCC has designed and established a network and computing system, making great progress over the past two years.

Slides WEOBM03 [2.921 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOBM03

About •

Received ※ 27 October 2023 — Revised ※ 06 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 09 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAM02

SmarGon MCS2: An Enhanced Multi-Axis Goniometer with a New Control System

controls, operation, interface, synchrotron

247

W. Glettig, D. Buntschu, E.H. Panepucci, M. Wang
PSI, Villigen PSI, Switzerland
A. Omelcenko
SmarAct, Oldenburg, Germany

As an improvement on the commercially available SmarGon multi-axis goniometer (SmarAct GmbH), the MX Group at the Paul Scherrer Institute (PSI) has been pursuing further development of the system. In addition to suggesting mechanical improvements to SmarAct to improve ruggedness and reliability, PSI has developed a brand-new and flexible control system for better customization, reliability and control. Calibration routines were implemented to reduce systemic errors, and the system has been tailored for practical beamline usage. SmarGon is a six degree-of-freedom positioning device, allowing positioning of a sample and orientation around any given point, with <5um sphere of confusion diameter. It was purpose-built for protein-crystallography experiments but, as will be presented here, was also re-purposed for other applications. Two devices have been in continuous 24/7 use for two years at the MX Beamlines PXI & PXII at SLS.

Slides THOAM02 [77.940 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOAM02

About •

Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 10 November 2023 — Issued ※ 08 January 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAM05

Modeling the Disturbances and the Dynamics of the New Micro CT Station for the MOGNO Beamline at Sirius/LNLS

experiment, synchrotron, GUI, detector

256

G.S. Baldon, F. Ferracioli, R.R. Geraldes, G.B.Z.L. Moreno, G.S. de Albuquerque
LNLS, Campinas, Brazil

Funding: Ministry of Science, Technology and Innovation (MCTI)
At the 4th generation synchrotron laboratory Sirius at the Brazilian Synchrotron Light Laboratory (LNLS), MOGNO is a high energy imaging beamline*, whose Nano Computed Tomography (CT) station is already in operation. The beamline’s 120x120 nm focus size, 3.1x3.1 mrad beam divergence, and 9·10¹¹ ph/s flux at 22-67 keV energy, allows experiments with better temporal and spatial resolution than lower energy and lower stability light sources. To further utilize its potential, a new Micro CT station is under development to perform experiments with 0.5-55 um resolution, and up to 4 Hz sample rotation. To achieve this, a model of the disturbances affecting the station was developed, which comprised: i) the characterization and simulation of disturbances, such as rotation forces; and ii) the modeling of the dynamics of the Micro-station. The dynamic model was built with the in-house developed Dynamic Error Budgeting Tool**, which uses dynamic substructuring to model 6 degrees of freedom rigid body systems. This work discusses the tradeoffs between rotation-related parameters affecting the sample to optics stability and the experiment resolution in the frequency domain integrated up to 2kHz.
* N. L. Archilha, et al. 2022, J. Phys.: Conf. Ser. 2380 012123.
** R. R. Geraldes et al. 2022, Precision Engineering Vol. 77, 90-103.

Slides THOAM05 [11.814 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOAM05

About •

Received ※ 02 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 04 March 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOBM02

First Results of a New Hydrostatic Leveling System on Test Procedures at Sirius

monitoring, operation, ISOL, alignment

261

W.R. Heinrich, G.R.S. Gama, G.J. Montagner, S.P. Oliveira, E. Teixeira
SETUP, Campinas, Brazil
R.B. Cardoso, L.R. Leão, S.R. Marques
CNPEM, Campinas, SP, Brazil
R.T. Neuenschwander
LNLS, Campinas, Brazil

Funding: FAPESP - Research Support Foundation of the State of Sao Paulo FINEP - Financier of Studies and Projects Program PIPE/PAPPE Subsidy - Phase 3 Process IDs: 2016/50070-3 and 2016/50522-1
The Hydrostatic Leveling System (HLS) is commonly employed in Structural Health Monitoring (SHM) to anticipate issues in large-scale structures. Particularly in structures like particle accelerators, it is used in high-precision alignment, where small differences in elevation such as terrestrial tides, could affect machine operation. This study outlines the development and evaluation of the first HLS based in Linear Variable Differential Transformer (LVDT) and were used to monitor the structure at LNLS/CNPEM, Brazil, from 2020 to 2023. A comparative analysis with a capacitance-based off-the-shelf HLS was executed, and experimental data analyzed through Fast Fourier Transform (FFT) confirmed the presence of tidal components in both HLS¿s data. Additionally, the correlation between level and temperature data was demonstrated by Pearson coefficient. The Setup-HLS device, developed with support from Brazilian national resources, exhibited accurate measurements in building tilt and diurnal and semi-diurnal Earth tide variations. Future researches include a calibration jig and an online verification system. This research provides a viable alternative to existing HLS systems.

Slides THOBM02 [10.405 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THOBM02

About •

Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 12 March 20244

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)