IPAC2022 - List of Keywords (permanent-magnet)

Paper	Title	Other Keywords	Page
MOPOST029	Fast Cycling FFA Permanent Magnet Synchrotron	proton, synchrotron, acceleration, cavity	126
	D. Trbojevic, J.S. Berg, M. Blaskiewicz, S.J. Brooks BNL, Upton, New York, USA
	Funding: Work performed under the Contract Number DE-AC02-98CH10886 with the auspices of US Department of Energy We present a novel concept of the Fixed-Field-Alternating (FFA) small racetrack proton accelerator 10x6 size, with kinetic energy range between 30-250 MeV made of permanent magnets. The horizontal and vertical tunes are fixed within the energy range, as the magnets The combined function magnets have additional sextupole and octupole multipoles the chromatic corrections, providing very fast cycling with a frequency of 1.3 KHz. The injector is 30 MeV commercially available cyclotron with RF frequency of 65 MHz. The permanent magnet synchrotron RF frequency is 390 MHz and acceleration uses the phase jump scheme.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOST029
About •	Received ※ 08 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 04 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOYSP1	Construction and Measurement of a Tuneable Permanent Magnet Quadrupole for Diamond Light Source	quadrupole, simulation, radiation, HOM	2424
	A.R. Bainbridge, B.J.A. Shepherd STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.G. Hinton, N. Krumpa STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom I.P.S. Martin, W. Tizzano DLS, Oxfordshire, United Kingdom
	Permanent magnets (PMs) are becoming an attractive proposition as a green and efficient replacement for electromagnets in particle accelerators. The Zero-Power Tuneable Optics (ZEPTO) collaboration between STFC and CERN has demonstrated that traditional limitations of PM technology, such as the ability to change the flux density in the magnet aperture, can be overcome. Moving PM blocks relative to fixed steel structures that define the field, the strength may be changed while suitable field homogeneity is maintained. A new ZEPTO variant has been developed in conjunction with Diamond Light Source (DLS) to demonstrate the technology on a real accelerator. This magnet features a number of crucial design innovations over previous generations of ZEPTO magnets that improve the convenience and versatility of PM systems and demonstrate that they can be deployed in many situations. We present the construction and measurement results of this new magnet and outline the planned data collection whilst installed on DLS. We analyse its performance relative to design and discuss the new features with focus on the real-world implications of PM technology for current and future accelerators.
	Slides THOYSP1 [3.675 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THOYSP1
About •	Received ※ 30 May 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 27 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST023	Current Status of the FFA@CEBAF Energy Upgrade Study	dipole, linac, experiment, extraction	2494
	R.M. Bodenstein, J.F. Benesch, S.A. Bogacz, A. Coxe, K.E. Deitrick, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi JLab, Newport News, Virginia, USA J.S. Berg, S.J. Brooks, D. Trbojevic BNL, Upton, New York, USA D. Douglas Douglas Consulting, York, Virginia, USA G.H. Hoffstaetter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA V.S. Morozov ORNL RAD, Oak Ridge, Tennessee, USA
	Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177. This work will describe the current status of the FFA@CEBAF energy upgrade feasibility studies. Technical updates are given, but more specific details are left to separate contributions. Specifically, this work will discuss improvements to the FFA arcs, a new recirculating injector proposal, and numerous modifications to the current 12 GeV CEBAF which will be required, such as the spreaders and recombiners architecture, splitters (time-of-flight chicanes), the extraction system, and the hall lines.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST023
About •	Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST034	Development of Magnetic Harmonics Measurement System for Small Aperture Magnets	quadrupole, simulation, multipole, data-analysis	2517
	J.M. Hwang, J. Bahng Korea University Sejong Campus, Sejong, Republic of Korea E.-S. Kim KUS, Sejong, Republic of Korea
	Storage ring has been improved to achieve high brightness of x-ray light source by making beam size and beam emittance smaller and enlarging the beam intensity. To achieve requirements such as a small beam emittance, the magnets need to have a larger magnetic field gradient and complex function with small aperture size. Since the complex structure and small beam size accompany with large errors in beam dynamics by high order field distortion of the magnets, it is important to measure the harmonics of the magnet in order to measure and improve it. Traditional field measurement methods such as hall probe and rotating loop have difficulty in measuring the harmonics of a magnet with a small aperture due to restrictions that physical size of the hall sensor and loop-card respectively. We developed Single Stretched Wire (SSW) method for the magnetic field measurement method on a small aperture magnet, in particular harmonics of the magnet. The system consists of a thin wire, accurate actuator system, and voltmeter. We describe the development of the SSW system and the result of the performance test by using our system in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST034
About •	Received ※ 08 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 22 June 2022 — Issue date ※ 02 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT050	Development and Construction of Cryogenic Permanent Magnet Undulators for ESRF-EBS	undulator, SRF, vacuum, cryogenics	2712
	C. Benabderrahmane, P. Brumund, J. Chavanne, D. Coulon, G. Le Bec, B. Ogier, R. Versteegen ESRF, Grenoble, France
	The ESRF Extremely Brilliant Source (ESRF-EBS) is on operation for Users since August 2020 after 20 months of shutdown. This first of a kind fourth generation high energy synchrotron is based on a Hybrid Multi-Bend Achromat lattice. The main goal of the ESRF-EBS is to reduce the horizontal emittance, which leads to a signifi-cant increase of the X-ray source brilliance. To cover the intensive demand of short period small gap undulators at ESRF-EBS, a new design for a 2 m Cryogenic Permanent Magnet Undulator (CPMU) has been developed. Six CPMUs will be installed in the next years; the first two CPMUs have been constructed and actually used on ID15 and ID16 beamline, the third one is under con-structing. An intensive refurbishment work has been done on the existing insertion devices to adapt them to the new accelerator which has shorter straight section and closer dipoles to the IDs than in the old one. This contribution will review the development, construc-tion and commissioning of the new CPMUs, and the refurbishment work done on the existing ones to adapt them to the new accelerator.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT050
About •	Received ※ 02 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 18 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT066	Helical Wiggler Design for Optical Stochastic Cooling at CESR	wiggler, simulation, electron, storage-ring	2751
	V. Khachatryan, M.B. Andorf, I.V. Bazarov, J.A. Crittenden, S.J. Levenson, J.M. Maxson, D.L. Rubin, J.P. Shanks, S. Wang Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA W.F. Bergan BNL, Upton, New York, USA
	Funding: The authors thank the Center for Bright Beams, NSF award PHY-1549132; W.F.B. was supported by the NSF Graduate Research Fellowship Program under grant number DGE-1650441. A helical wiggler with parameter k_und=4.35 has been designed for the Optical Stochastic Cooling (OSC) experiment in the Cornell Electron Storage Ring (CESR). We consider four Halbach arrays, which dimensions are optimized to get the required helical field profile, as well as, to get the best Dynamic Aperture (DA) in simulations. The end poles are designed with different dimensions to minimize the first and second field integrals to avoid the need of additional correctors for the beam orbit. The design is adopted to minimize the risks for the magnet blocks demagnetization. To quantify the tolerances, we simulated the effects of different types of geometrical and magnetic field errors on the OSC damping rates. In addition, to understand the challenges for the construction, as well as, to validate the model field calculations, we prototyped a small two period version. The prototype field is compared to the model, and the results are presented in this work.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT066
About •	Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 14 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK009	Design of a Permanent Magnet Based Dipole Quadrupole Magnet	dipole, quadrupole, operation, multipole	2784
	A.G. Hinton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom M. Kokole, T. Milharčič KYMA, Trieste, Italy A. Shahveh DLS, Oxfordshire, United Kingdom B.J.A. Shepherd STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom B.J.A. Shepherd Cockcroft Institute, Warrington, Cheshire, United Kingdom
	Permanent magnet technology can facilitate the design of accelerator magnets with much lower power consumption than traditional resistive electromagnets. By reducing the power requirements of magnets, more sustainable accelerators can be designed and built. At STFC, as part of the I.FAST collaboration, we are working to develop sustainable technologies for future accelerators. As part of this work, we have designed a permanent magnet based dipole-quadrupole magnet with parameters suited to meet the requirements of the proposed Diamond-II upgrade. We present here the magnetic design of the dipole-quadrupole magnet. The design, based on a single sided dipole-quadrupole, uses permanent magnets to generate the field in the magnet bore. The design includes the shaping of the pole tips to reduce multipole errors as well as methods of providing thermal stabilisation using thermal shunts and field tuning using resistive coils. The mechanical design of the magnet is being undertaken by colleagues at Kyma and a prototype of the magnet will soon be built and tested.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK009
About •	Received ※ 06 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK011	Permanent Magnets for the CEBAF 24GeV Upgrade	linac, radiation, lattice, synchrotron	2792
	S.J. Brooks BNL, Upton, New York, USA S.A. Bogacz JLab, Newport News, Virginia, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. An upgrade of the CEBAF facility to double its present energy of 12GeV has been proposed. To provide double the number of linac passes using the existing five stacked arc beamlines, some beamlines are replaced by fixed-field accelerator (FFA) arcs, allowing multiple energies to pass through the same magnets. A solution is presented in which two of the existing electromagnetic beamlines are replaced with permanent magnet non-scaling FFA arcs, as demonstrated at CBETA. The two-stage design reduces peak magnetic field and synchrotron radiation loss compared to using a single stage. FFAs do not pulse their magnets, making permanent magnets a promising and power-efficient technology option. However, the magnetic field requirements are still at the high end of accelerator permanent magnets produced thus far (1.6T peak on beam), while the magnets must also be combined-function, having a gradient with a dipole offset. Designs using a novel oval aperture and open midplane within an adapted Halbach magnet are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK011
About •	Received ※ 31 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 04 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPOST029

Fast Cycling FFA Permanent Magnet Synchrotron

proton, synchrotron, acceleration, cavity

126

D. Trbojevic, J.S. Berg, M. Blaskiewicz, S.J. Brooks
BNL, Upton, New York, USA

Funding: Work performed under the Contract Number DE-AC02-98CH10886 with the auspices of US Department of Energy
We present a novel concept of the Fixed-Field-Alternating (FFA) small racetrack proton accelerator 10x6 size, with kinetic energy range between 30-250 MeV made of permanent magnets. The horizontal and vertical tunes are fixed within the energy range, as the magnets The combined function magnets have additional sextupole and octupole multipoles the chromatic corrections, providing very fast cycling with a frequency of 1.3 KHz. The injector is 30 MeV commercially available cyclotron with RF frequency of 65 MHz. The permanent magnet synchrotron RF frequency is 390 MHz and acceleration uses the phase jump scheme.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOST029

About •

Received ※ 08 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 04 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOYSP1

Construction and Measurement of a Tuneable Permanent Magnet Quadrupole for Diamond Light Source

quadrupole, simulation, radiation, HOM

2424

A.R. Bainbridge, B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.G. Hinton, N. Krumpa
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
I.P.S. Martin, W. Tizzano
DLS, Oxfordshire, United Kingdom

Permanent magnets (PMs) are becoming an attractive proposition as a green and efficient replacement for electromagnets in particle accelerators. The Zero-Power Tuneable Optics (ZEPTO) collaboration between STFC and CERN has demonstrated that traditional limitations of PM technology, such as the ability to change the flux density in the magnet aperture, can be overcome. Moving PM blocks relative to fixed steel structures that define the field, the strength may be changed while suitable field homogeneity is maintained. A new ZEPTO variant has been developed in conjunction with Diamond Light Source (DLS) to demonstrate the technology on a real accelerator. This magnet features a number of crucial design innovations over previous generations of ZEPTO magnets that improve the convenience and versatility of PM systems and demonstrate that they can be deployed in many situations. We present the construction and measurement results of this new magnet and outline the planned data collection whilst installed on DLS. We analyse its performance relative to design and discuss the new features with focus on the real-world implications of PM technology for current and future accelerators.

Slides THOYSP1 [3.675 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THOYSP1

About •

Received ※ 30 May 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 27 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST023

Current Status of the FFA@CEBAF Energy Upgrade Study

dipole, linac, experiment, extraction

2494

R.M. Bodenstein, J.F. Benesch, S.A. Bogacz, A. Coxe, K.E. Deitrick, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi
JLab, Newport News, Virginia, USA
J.S. Berg, S.J. Brooks, D. Trbojevic
BNL, Upton, New York, USA
D. Douglas
Douglas Consulting, York, Virginia, USA
G.H. Hoffstaetter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
V.S. Morozov
ORNL RAD, Oak Ridge, Tennessee, USA

Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177.
This work will describe the current status of the FFA@CEBAF energy upgrade feasibility studies. Technical updates are given, but more specific details are left to separate contributions. Specifically, this work will discuss improvements to the FFA arcs, a new recirculating injector proposal, and numerous modifications to the current 12 GeV CEBAF which will be required, such as the spreaders and recombiners architecture, splitters (time-of-flight chicanes), the extraction system, and the hall lines.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST023

About •

Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST034

Development of Magnetic Harmonics Measurement System for Small Aperture Magnets

quadrupole, simulation, multipole, data-analysis

2517

J.M. Hwang, J. Bahng
Korea University Sejong Campus, Sejong, Republic of Korea
E.-S. Kim
KUS, Sejong, Republic of Korea

Storage ring has been improved to achieve high brightness of x-ray light source by making beam size and beam emittance smaller and enlarging the beam intensity. To achieve requirements such as a small beam emittance, the magnets need to have a larger magnetic field gradient and complex function with small aperture size. Since the complex structure and small beam size accompany with large errors in beam dynamics by high order field distortion of the magnets, it is important to measure the harmonics of the magnet in order to measure and improve it. Traditional field measurement methods such as hall probe and rotating loop have difficulty in measuring the harmonics of a magnet with a small aperture due to restrictions that physical size of the hall sensor and loop-card respectively. We developed Single Stretched Wire (SSW) method for the magnetic field measurement method on a small aperture magnet, in particular harmonics of the magnet. The system consists of a thin wire, accurate actuator system, and voltmeter. We describe the development of the SSW system and the result of the performance test by using our system in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST034

About •

Received ※ 08 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 22 June 2022 — Issue date ※ 02 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT050

Development and Construction of Cryogenic Permanent Magnet Undulators for ESRF-EBS

undulator, SRF, vacuum, cryogenics

2712

C. Benabderrahmane, P. Brumund, J. Chavanne, D. Coulon, G. Le Bec, B. Ogier, R. Versteegen
ESRF, Grenoble, France

The ESRF Extremely Brilliant Source (ESRF-EBS) is on operation for Users since August 2020 after 20 months of shutdown. This first of a kind fourth generation high energy synchrotron is based on a Hybrid Multi-Bend Achromat lattice. The main goal of the ESRF-EBS is to reduce the horizontal emittance, which leads to a signifi-cant increase of the X-ray source brilliance. To cover the intensive demand of short period small gap undulators at ESRF-EBS, a new design for a 2 m Cryogenic Permanent Magnet Undulator (CPMU) has been developed. Six CPMUs will be installed in the next years; the first two CPMUs have been constructed and actually used on ID15 and ID16 beamline, the third one is under con-structing. An intensive refurbishment work has been done on the existing insertion devices to adapt them to the new accelerator which has shorter straight section and closer dipoles to the IDs than in the old one. This contribution will review the development, construc-tion and commissioning of the new CPMUs, and the refurbishment work done on the existing ones to adapt them to the new accelerator.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT050

About •

Received ※ 02 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 18 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT066

Helical Wiggler Design for Optical Stochastic Cooling at CESR

wiggler, simulation, electron, storage-ring

2751

V. Khachatryan, M.B. Andorf, I.V. Bazarov, J.A. Crittenden, S.J. Levenson, J.M. Maxson, D.L. Rubin, J.P. Shanks, S. Wang
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
W.F. Bergan
BNL, Upton, New York, USA

Funding: The authors thank the Center for Bright Beams, NSF award PHY-1549132; W.F.B. was supported by the NSF Graduate Research Fellowship Program under grant number DGE-1650441.
A helical wiggler with parameter k_und=4.35 has been designed for the Optical Stochastic Cooling (OSC) experiment in the Cornell Electron Storage Ring (CESR). We consider four Halbach arrays, which dimensions are optimized to get the required helical field profile, as well as, to get the best Dynamic Aperture (DA) in simulations. The end poles are designed with different dimensions to minimize the first and second field integrals to avoid the need of additional correctors for the beam orbit. The design is adopted to minimize the risks for the magnet blocks demagnetization. To quantify the tolerances, we simulated the effects of different types of geometrical and magnetic field errors on the OSC damping rates. In addition, to understand the challenges for the construction, as well as, to validate the model field calculations, we prototyped a small two period version. The prototype field is compared to the model, and the results are presented in this work.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT066

About •

Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 14 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK009

Design of a Permanent Magnet Based Dipole Quadrupole Magnet

dipole, quadrupole, operation, multipole

2784

A.G. Hinton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
M. Kokole, T. Milharčič
KYMA, Trieste, Italy
A. Shahveh
DLS, Oxfordshire, United Kingdom
B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
B.J.A. Shepherd
Cockcroft Institute, Warrington, Cheshire, United Kingdom

Permanent magnet technology can facilitate the design of accelerator magnets with much lower power consumption than traditional resistive electromagnets. By reducing the power requirements of magnets, more sustainable accelerators can be designed and built. At STFC, as part of the I.FAST collaboration, we are working to develop sustainable technologies for future accelerators. As part of this work, we have designed a permanent magnet based dipole-quadrupole magnet with parameters suited to meet the requirements of the proposed Diamond-II upgrade. We present here the magnetic design of the dipole-quadrupole magnet. The design, based on a single sided dipole-quadrupole, uses permanent magnets to generate the field in the magnet bore. The design includes the shaping of the pole tips to reduce multipole errors as well as methods of providing thermal stabilisation using thermal shunts and field tuning using resistive coils. The mechanical design of the magnet is being undertaken by colleagues at Kyma and a prototype of the magnet will soon be built and tested.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK009

About •

Received ※ 06 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK011

Permanent Magnets for the CEBAF 24GeV Upgrade

linac, radiation, lattice, synchrotron

2792

S.J. Brooks
BNL, Upton, New York, USA
S.A. Bogacz
JLab, Newport News, Virginia, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
An upgrade of the CEBAF facility to double its present energy of 12GeV has been proposed. To provide double the number of linac passes using the existing five stacked arc beamlines, some beamlines are replaced by fixed-field accelerator (FFA) arcs, allowing multiple energies to pass through the same magnets. A solution is presented in which two of the existing electromagnetic beamlines are replaced with permanent magnet non-scaling FFA arcs, as demonstrated at CBETA. The two-stage design reduces peak magnetic field and synchrotron radiation loss compared to using a single stage. FFAs do not pulse their magnets, making permanent magnets a promising and power-efficient technology option. However, the magnetic field requirements are still at the high end of accelerator permanent magnets produced thus far (1.6T peak on beam), while the magnets must also be combined-function, having a gradient with a dipole offset. Designs using a novel oval aperture and open midplane within an adapted Halbach magnet are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK011

About •

Received ※ 31 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 04 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)