Keyword: positron
Paper Title Other Keywords Page
MOP106 Electron Acceleration via Positron Driven Plasma Wakefield Accelerator electron, plasma, wakefield, proton 295
 
  • S.F. Pinkerton, P. Muggli
    USC, Los Angeles, California, USA
  • W. An, W.B. Mori
    UCLA, Los Angeles, California, USA
 
  Funding: Work supported by US DoE and NSF.
We show that a positron bunch with parameters accessible at FACET can excite a stable plasma wakefield over a few meters and a witness electron bunch experiences an accelerating gradient on the order of 10 GeV/m. Initial simulations show that the positron drive bunch is strongly affected by the transverse components of the wakefield: the positron bunch evolves significantly, which affects both the wakefield and witness bunch dynamics. Various solutions are presented, of which the positron-electron train shceme generates a desirable wakefield.
 
 
MOP214 Methods for Quantitative Interpretation of Retarding Field Analyzer Data simulation, electron, photon, pick-up 501
 
  • J.R. Calvey, J.A. Crittenden, G. Dugan, M.A. Palmer
    CLASSE, Ithaca, New York, USA
  • M.A. Furman
    LBNL, Berkeley, California, USA
  • K.C. Harkay
    ANL, Argonne, USA
 
  Funding: US Department of Energy grant DE-FC02-08ER41538 US National Science Foundation grant PHY-0734867
Over the course of the CesrTA program at Cornell, over 30 Retarding Field Analyzers (RFAs) have been installed in the CESR storage ring, and a great deal of data has been taken with them. These devices measure the local electron cloud density and energy distribution, and can be used to evaluate the efficacy of different cloud mitigation techniques. Obtaining a quantitative understanding of RFA data requires use of cloud simulation programs, as well as a detailed model of the detector itself. In a drift region, the RFA can be modeled by postprocessing the output of a simulation code, and one can obtain best fit values for important simulation parameters with a chi-square minimization method.
 
 
MOP304 Development of an X-Ray Beam Size Monitor with Single Pass Measurement Capability for CesrTA electron, optics, photon, controls 687
 
  • N.T. Rider, J.P. Alexander, M.G. Billing, J. Dobbins, R.E. Meller, M.A. Palmer, D.P. Peterson, C.R. Strohman
    CLASSE, Ithaca, New York, USA
  • J.W. Flanagan
    KEK, Ibaraki, Japan
 
  The CESR Test Accelerator (CesrTA) program targets the study of beam physics issues relevant to linear collider damping rings. This endeavor requires new instrumentation to study the beam dynamics along trains of ultra low emittance bunches. A key element of the program has been the development of an x-ray beam size monitor capable of collecting single pass measurements of individual bunches in a train over thousands of turns. This instrument utilizes custom, high bandwidth amplifiers and digitization hardware to collect signals from a linear InGaAs diode array. The digitizer is synchronized with the CESR timing system and is capable of recording beam size measurements for bunches spaced by as little as 4ns. The x-ray source is a bending magnet with Ec=0.6 keV during 2 GeV CesrTA operations. For these conditions the amplifier dynamic range was optimized to allow measurements with 3x109 to 1011 particles per bunch. Initial testing is complete. Data analysis and examples of key measurements which illustrate the instrument's performance are presented. This device offers unique measurement capabilities applicable to future high energy physics accelerators and light sources.  
 
TUOBN4 Plasma Wakefield Experiments at FACET plasma, electron, wakefield, acceleration 715
 
  • M.J. Hogan, R.J. England, J.T. Frederico, C. Hast, S.Z. Li, M.D. Litos, D.R. Walz
    SLAC, Menlo Park, California, USA
  • W. An, C.E. Clayton, C. Joshi, W. Lu, K.A. Marsh, W.B. Mori, S. Tochitsky
    UCLA, Los Angeles, California, USA
  • P. Muggli, S.F. Pinkerton, Y. Shi
    USC, Los Angeles, California, USA
 
  Funding: Work supported by the U.S. Department of Energy under contract number DE-AC02-76SF00515.
FACET, the Facility for Advanced Accelerator and Experimental Tests, is a new facility being constructed in sector 20 of the SLAC linac primarily to study beam driven plasma wakefield acceleration beginning in summer 2011. The nominal FACET parameters are 23GeV, 3nC electron bunches compressed to ~20μm long and focused to ~10μm wide. The intense fields of the FACET bunches will be used to field ionize neutral lithium or cesium vapor produced in a heat pipe oven. Previous experiments at SLAC demonstrated 50GeV/m gradients in an 85cm field ionized lithium plasma where the interaction distance was limited by head erosion. Simulations indicate the lower ionization potential of cesium will decrease the rate of head erosion and increase single stage performance. The initial experimental program will compare the performance of lithium and cesium plasma sources with single and double bunches. Later experiments will investigate improved performance with a pre-ionized cesium plasma. The status of the experiments and expected performance are reviewed.
 
slides icon Slides TUOBN4 [13.080 MB]  
 
WEP084 Beam Dynamics and Instabilities in MEIC Design impedance, ion, electron, feedback 1630
 
  • S. Ahmed, G.A. Krafft, B.C. Yunn
    JLAB, Newport News, Virginia, USA
 
  Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
In this paper, we report the first study of beam related instabilities in lepton ring of the proposed electron-ion collider beyond the 12 GeV upgrade of CEBAF at Jefferson lab. The design parameters are consistent with PEP-II. Present studies reveal that coupled bunch and two stream instabilities are important issues and we need feedback system.
 
 
WEP087 Numerical Studies of Non-Linear Dynamics in BEP resonance, sextupole, coupling, booster 1636
 
  • I. Koop, E. Perevedentsev
    BINP SB RAS, Novosibirsk, Russia
  • T.V. Zolkin
    University of Chicago, Chicago, Illinois, USA
 
  An analysis of the dependence of experimental captured positron current data from the booster storage ring BEP (VEPP-2000 facility, BINP, Russia) on the working point position on the frequency map has uncovered a great number of different non-linear resonances. The number of captured positrons after a single injection is observed to be much less than the expected value. It is anticipated that the high degree of symmetry in the magnet system of BEP, however, should lead to the suppression of such resonances. To study this discrepancy, numerical simulations of positron beam movement under different perturbations to account for potential errors in magnetic field gradient of non-linear elements and errors in their angular location are used. The findings of this research provide qualitative explanations of the experimental work diagram and answers to two main questions, specifically “Why in the absence of skew-sextupoles in structure and small coupling are strong skew-sextupole resonances observed” and “Why skew-sextupole resonances are stronger than sextupole ones of the same harmonic”. A comparison between simulation results and analytical estimates is also presented.  
 
WEP109 Simulations of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA emittance, simulation, electron, synchrotron 1683
 
  • K.G. Sonnad, K.R. Butler
    Cornell University, Ithaca, New York, USA
  • G. Dugan, M.A. Palmer
    CLASSE, Ithaca, New York, USA
  • M.T.F. Pivi
    SLAC, Menlo Park, California, USA
 
  Funding: US Department of Energy DE-FC02-08ER41538, National Science Foundation PHY-0734867
We present results of a series of studies obtained using the simulation code CMAD to study how electron clouds affect the dynamics of positron beams in CesrTA. The study complements ongoing experiments dedicated for studying the same phenomena. The simulation involves tracking positrons through the CesrTA lattice and simultaneously computing the force exerted due to space charge of the electrons on each of the tracked positrons. The electrons themselves are allowed to evolve under the influence of the positrons. Several results bear a close resemblance to what has been observed experimentally.
 
 
WEP134 Depolarization and Beam-beam Effects at Future e+e Colliders polarization, photon, collider, undulator 1731
 
  • A.F. Hartin
    DESY, Hamburg, Germany
  • I.R. Bailey, C. Pidcott
    Lancaster University, Lancaster, United Kingdom
  • G.A. Moortgat-Pick
    University of Hamburg, Hamburg, Germany
 
  In order to exploit the full potential of proposed future high-energy electron-positron linear colliders, precise knowledge of the polarization state of the beams is required. In this paper we present an updated analysis of the depolarization effects caused by the intense beam-beam interaction, which is expected to be the dominant source of depolarization. The impact of higher-order effects are considered and numerical results from the Guinea-Pig and CAIN simulations are presented for the latest International Linear Collider (ILC) and Compact LInear Collider (CLIC) parameters.  
 
WEP142 Electron Cloud Modeling Results for Time-resolved Shielded Pickup Measurements at CesrTA electron, pick-up, simulation, vacuum 1752
 
  • J.A. Crittenden, Y. Li, X. Liu, M.A. Palmer, J.P. Sikora
    CLASSE, Ithaca, New York, USA
  • S. Calatroni, G. Rumolo
    CERN, Geneva, Switzerland
 
  Funding: Support by DOE contract DE-FC02-08ER41538 and NSF contract PHY-0734867
The Cornell Electron Storage Ring Test Accelerator (CesrTA) program includes investigations into electron cloud buildup, applying various mitigation techniques in custom vacuum chambers. Among these are two 1.1 meter long sections located symmetrically in the east and west arc regions. These chambers are equipped with pickup detectors shielded against the direct beam-induced signal. Here we report on results from the ECLOUD modeling code which highlight the sensitivity of these measurements to model parameters such as the photoelectron energy distributions, and the secondary elastic yield value.
 
 
WEP195 Time Resolved Measurement of Electron Clouds at CesrTA using Shielded Pickups electron, pick-up, solenoid, vacuum 1855
 
  • J.P. Sikora, M.G. Billing, J.A. Crittenden, Y. Li, M.A. Palmer
    CLASSE, Ithaca, New York, USA
  • S. De Santis
    LBNL, Berkeley, California, USA
 
  Funding: This work is supported by the US National Science Foundation PHY-0734867, and the US Department of Energy DE-FC02-08ER41538.
The Cornell Electron Storage Ring has been reconfigured as a Test Accelerator (CesrTA). Shielded pickups have been installed at three locations in CesrTA for the purpose of studying time resolved electron cloud build-up and decay. The pickup design provides electromagnetic shielding from the beam wakefield while allowing cloud electrons in the vacuum space to enter the detector. This paper describes the hardware configuration and capabilities of these detectors at CesrTA, presents examples of measurements, and outlines the interpretation of detector signals with regard to electron clouds. Useful features include time-of-flight measurement of cloud electrons and the use of a solenoidal field for energy measurement of photoelectrons. Measurement techniques include the use of two bunches spaced in multiples of 4ns, where the second bunch samples the decay of the cloud produced by the first bunch.
 
 
THP025 A Cooled Generalized Multiple Target System to Create Positrons for a Compact Tunable Intense Gamma Ray Source target, electron, dipole, background 2169
 
  • C. Y. Yoshikawa, C.M. Ankenbrandt
    Muons, Inc, Batavia, USA
  • A. Afanasev
    Hampton University, Hampton, Virginia, USA
  • D.V. Neuffer
    Fermilab, Batavia, USA
 
  Funding: This work was funded by Pacific Northwest National Laboratory which is operated for the U.S. Department of Energy by Battelle Memorial Institute under Contract DE-AC06-76RLO 1830.
A compact tunable gamma ray source has many potential uses in medical and industrial applications. One novel scheme to produce an intense beam of gammas relies on the ability to create a high flux of positrons, which are produced by an electron beam on a high Z target. We present an innovative system which allows for a nearly arbitrary targeting geometry that supports multiple targets, whose optimal design is allowed to be driven by the physics of the positron production processes, while naturally supporting cooling of the targets.
 
 
THP076 Combined Target-collection System for Positron Production in ILC target, polarization, undulator, electron 2273
 
  • A.A. Mikhailichenko
    CLASSE, Ithaca, New York, USA
 
  Funding: NSF
We describe the positron collection system with Lithium lens, while one of the flanges of this lens made on Tungsten, which serves as a target for the photons radiated in a helical undulator by high-energy ILC beam.