IPAC2015 - List of Authors (Cheng, Y.-S.)

Paper	Title	Page
MOPTY064	Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies	1088
	P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY065	Beam Stability of the Taiwan Light Source Storage Ring	1091
	H.C. Chen, H.H. Chen, Y.-S. Cheng, S.J. Huang, C.H. Kuo, J.A. Li, Y.K. Lin NSRRC, Hsinchu, Taiwan
	The Taiwan Light Source Storage Ring (SR) has been in operation since many years ago. Maintaining best stability of the electron beam is becoming the main challenge. This study endeavored to improve the electron beam stability of The Taiwan Light Source Storage Ring (SR). Employing the artificial neural network (ANN)-constructed experiment design to analyze and optimize the storage ring betatron tunes .This report outlines the details of the beam stability process experiment.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY065
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY069	Control Interface and Functionality of TPS Booster Power Supply	1094
	C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070	Online RadFET Reader for Beam Loss Monitoring System	1097
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY071	FPGA Based Global Orbit Feedback in the Taiwan Light Source	1100
	C.H. Kuo, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee NSRRC, Hsinchu, Taiwan
	The global orbit feedback for the 1.5 GeV electron storage ring of TLS has been operated more than ten years. This system uses general processors to control feedback loop with 1 kHz rate. It is very important for various operation of storage ring now, but some hardware components could have been out of stock in the future. As a prototype, a FPGA based fast global orbit feedback at a 10 kHz data acquisition rate has been developed. A micro-TCA liked platform with FPGA board is used to implement control algorithm and acquire BPM data from Libera Brillance. The correction algorithm is written in VHDL and connected to power supply with AURORA digital links. The system architecture will be discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY071
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072	Beam Loss Study of TLS Using RadFETs	1103
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY073	Commissioning of BPM System for TPS Booster Synchrotron	1106
	P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo NSRRC, Hsinchu, Taiwan
	The TPS is a latest generation of high brightness synchrotron light source and ready for commissioning. It consists of a 150 MeV electron linac, a booster synchrotron, a 3 GeV storage ring, and experimental beam lines. The BPM electronics Libera Brilliance⁺ are adopted for booster and storage ring of Taiwan Photon Source (TPS). The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM measurement and related diagnostic tools during TPS booster commissioning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY073
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY074	Preliminary Beam Test of Synchrotron Radiation Monitoring System at Taiwan Photon Source	1109
	C.Y. Liao, Y.-S. Cheng, J. -Y. Chuang, K.T. Hsu, S.Y. Hsu, H.P. Hsueh, K.H. Hu, C.K. Kuan, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source (TPS) is a third generation 3 GeV synchrotron light facility. The synchrotron radiation from a dipole can be used to observe the beam parameters. The synchrotron radiation monitor (SRM) systems were designed and implemented for the booster synchrotron and storage ring. The SRM for the booster synchrotron can serve to diagnose the energy ramping process. The beam size decreases when the energy increases was observed. In the storage ring, the streak camera was preferred to observe the beam behaviour of the consecutive bunches. The bunch length and longitudinal instability were observed. The preliminary beam test results are summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY075	Vibration Measurement of the Magnets in the Storage Ring of TPS	1112
	C.H. Huang, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	Taiwan photon source is a 3rd generation synchrotron light source which is in beam commissioning at NSRRC. Orbit stability within 100 nm range is essential for such a small emittance light source. Technical noise from the vacuum pumps, water flow, etc. will cause the vibration of quadrupoles and deleterious orbit stability. In order to investigate the magnitude of vibration in the magnets of the storage ring, the vibration spectra of the lattice quadruples; the coherence between the magnets, girders and ground will be systematic investigated in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY075
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY076	Development of EPICS Applications for the Taiwan Light Source	1116
	Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.Y. Liao NSRRC, Hsinchu, Taiwan
	The TLS (Taiwan Light Source) is a third generation of synchrotron light source, and it has been operated since 1993. The TLS control system is a proprietary design. It was performed minor upgrade several times to avoid obsolete of some system components and keep up-to-date during last two decades. The control system of the TPS project (Taiwan Photon Source) is based upon the EPICS framework. To save resources for TLS control system maintenance, adopt EPICS for newly developed and rejuvenated subsystems for some of the TLS control interfaces includes BPM system, insertion devices, bunch-by-bunch feedbacks, electronics instruments interface and so on. Some EPICS related applications have been developed, and EPICS graphical user interface is also operated at the TLS control consoles environment normally. Current system allowed two kinds of control environments working together. The efforts will be described at this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY076
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077	Control Interface of Pulse Magnet Power Supply for TPS Project	1120
	C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin NSRRC, Hsinchu, Taiwan
	The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE049	TPS Linac Relocation and Beam Test of the LTB Transfer Line	1731
	H.-P. Chang, A.Y. Chen, C.L. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.-K. Lin, Y.C. Lin, J. Liu, K.L. Tsai NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) 150 MeV linac has been relocated from its 2011 test site to the TPS linac tunnel in 2014. After functional test of the linac hardware modules, the beam parameters were carefully examined at a 31-degree bend diagnostic beam line LTD (linac to beam dump) and compared with previous results. Then, the 150 MeV electron beam was delivered to the linac to booster transfer line (LTB) for beam commissioning. The beam optics matching at both the LTB entrance (i.e. linac exit) and the LTB exit (i.e. injection point of booster) was performed for injection optimization purpose. The LTB lattice setting was verified in the beam steering through LTD and LTB with the help of diagnostics tools such as beam profile monitors (SM) and beam position monitors (BPM). The overall performance of the linac and LTB will be described in this report. #peace@nsrrc.org.tw
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE049
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA035	Development of an IGBT Pulser for TPS LTB Kicker	3191
	C.L. Chen, H.-P. Chang, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.-K. Lin, K.L. Tsai NSRRC, Hsinchu, Taiwan
	The TPS LTB injection kicker was first commissioned using PFN pulser equipped with thyratron switch. Although its bench-testing results fulfilled the specifications but the performance was degraded due to unavoidable integration difficulty. After evaluating a couple of improvement options in hand, a pulser using IGBT switch was chosen for off-the-bench beneficial purpose. The upgraded pulser satisfies the overall specifications with comfortable margins. Some major performance parameters such as flattop and tail ringing are emphasized concerning their influence on beam injection. This report describes the field-testing result of this IGBT pulser.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies

1088

P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY065

Beam Stability of the Taiwan Light Source Storage Ring

1091

H.C. Chen, H.H. Chen, Y.-S. Cheng, S.J. Huang, C.H. Kuo, J.A. Li, Y.K. Lin
NSRRC, Hsinchu, Taiwan

The Taiwan Light Source Storage Ring (SR) has been in operation since many years ago. Maintaining best stability of the electron beam is becoming the main challenge. This study endeavored to improve the electron beam stability of The Taiwan Light Source Storage Ring (SR). Employing the artificial neural network (ANN)-constructed experiment design to analyze and optimize the storage ring betatron tunes .This report outlines the details of the beam stability process experiment.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY065

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY069

Control Interface and Functionality of TPS Booster Power Supply

1094

C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070

Online RadFET Reader for Beam Loss Monitoring System

1097

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY071

FPGA Based Global Orbit Feedback in the Taiwan Light Source

1100

C.H. Kuo, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee
NSRRC, Hsinchu, Taiwan

The global orbit feedback for the 1.5 GeV electron storage ring of TLS has been operated more than ten years. This system uses general processors to control feedback loop with 1 kHz rate. It is very important for various operation of storage ring now, but some hardware components could have been out of stock in the future. As a prototype, a FPGA based fast global orbit feedback at a 10 kHz data acquisition rate has been developed. A micro-TCA liked platform with FPGA board is used to implement control algorithm and acquire BPM data from Libera Brillance. The correction algorithm is written in VHDL and connected to power supply with AURORA digital links. The system architecture will be discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY071

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072

Beam Loss Study of TLS Using RadFETs

1103

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY073

Commissioning of BPM System for TPS Booster Synchrotron

1106

P.C. Chiu, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.H. Kuo
NSRRC, Hsinchu, Taiwan

The TPS is a latest generation of high brightness synchrotron light source and ready for commissioning. It consists of a 150 MeV electron linac, a booster synchrotron, a 3 GeV storage ring, and experimental beam lines. The BPM electronics Libera Brilliance⁺ are adopted for booster and storage ring of Taiwan Photon Source (TPS). The provided BPM data is useful for beam commissioning where it can be used to measure beam position, rough beam intensity along the longitudinal position and also for tune measurement. This report summarizes the efforts on BPM measurement and related diagnostic tools during TPS booster commissioning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY073

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY074

Preliminary Beam Test of Synchrotron Radiation Monitoring System at Taiwan Photon Source

1109

C.Y. Liao, Y.-S. Cheng, J. -Y. Chuang, K.T. Hsu, S.Y. Hsu, H.P. Hsueh, K.H. Hu, C.K. Kuan, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source (TPS) is a third generation 3 GeV synchrotron light facility. The synchrotron radiation from a dipole can be used to observe the beam parameters. The synchrotron radiation monitor (SRM) systems were designed and implemented for the booster synchrotron and storage ring. The SRM for the booster synchrotron can serve to diagnose the energy ramping process. The beam size decreases when the energy increases was observed. In the storage ring, the streak camera was preferred to observe the beam behaviour of the consecutive bunches. The bunch length and longitudinal instability were observed. The preliminary beam test results are summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY075

Vibration Measurement of the Magnets in the Storage Ring of TPS

1112

C.H. Huang, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

Taiwan photon source is a 3rd generation synchrotron light source which is in beam commissioning at NSRRC. Orbit stability within 100 nm range is essential for such a small emittance light source. Technical noise from the vacuum pumps, water flow, etc. will cause the vibration of quadrupoles and deleterious orbit stability. In order to investigate the magnitude of vibration in the magnets of the storage ring, the vibration spectra of the lattice quadruples; the coherence between the magnets, girders and ground will be systematic investigated in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY075

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY076

Development of EPICS Applications for the Taiwan Light Source

1116

Y.-S. Cheng, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.Y. Liao
NSRRC, Hsinchu, Taiwan

The TLS (Taiwan Light Source) is a third generation of synchrotron light source, and it has been operated since 1993. The TLS control system is a proprietary design. It was performed minor upgrade several times to avoid obsolete of some system components and keep up-to-date during last two decades. The control system of the TPS project (Taiwan Photon Source) is based upon the EPICS framework. To save resources for TLS control system maintenance, adopt EPICS for newly developed and rejuvenated subsystems for some of the TLS control interfaces includes BPM system, insertion devices, bunch-by-bunch feedbacks, electronics instruments interface and so on. Some EPICS related applications have been developed, and EPICS graphical user interface is also operated at the TLS control consoles environment normally. Current system allowed two kinds of control environments working together. The efforts will be described at this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY076

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077

Control Interface of Pulse Magnet Power Supply for TPS Project

1120

C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin
NSRRC, Hsinchu, Taiwan

The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE049

TPS Linac Relocation and Beam Test of the LTB Transfer Line

1731

H.-P. Chang, A.Y. Chen, C.L. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.-K. Lin, Y.C. Lin, J. Liu, K.L. Tsai
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) 150 MeV linac has been relocated from its 2011 test site to the TPS linac tunnel in 2014. After functional test of the linac hardware modules, the beam parameters were carefully examined at a 31-degree bend diagnostic beam line LTD (linac to beam dump) and compared with previous results. Then, the 150 MeV electron beam was delivered to the linac to booster transfer line (LTB) for beam commissioning. The beam optics matching at both the LTB entrance (i.e. linac exit) and the LTB exit (i.e. injection point of booster) was performed for injection optimization purpose. The LTB lattice setting was verified in the beam steering through LTD and LTB with the help of diagnostics tools such as beam profile monitors (SM) and beam position monitors (BPM). The overall performance of the linac and LTB will be described in this report.
#peace@nsrrc.org.tw

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE049

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA035

Development of an IGBT Pulser for TPS LTB Kicker

3191

C.L. Chen, H.-P. Chang, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.-K. Lin, K.L. Tsai
NSRRC, Hsinchu, Taiwan

The TPS LTB injection kicker was first commissioned using PFN pulser equipped with thyratron switch. Although its bench-testing results fulfilled the specifications but the performance was degraded due to unavoidable integration difficulty. After evaluating a couple of improvement options in hand, a pulser using IGBT switch was chosen for off-the-bench beneficial purpose. The upgraded pulser satisfies the overall specifications with comfortable margins. Some major performance parameters such as flattop and tail ringing are emphasized concerning their influence on beam injection. This report describes the field-testing result of this IGBT pulser.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)