SLAC, Menlo Park, California, USA
UCLA, Los Angeles, California, USA
UCLA, Los Angeles, USA
SLAC, Menlo Park, California, USA
RadiaBeam, Santa Monica, California, USA
The University of Liverpool, Liverpool, United Kingdom
The extremely intense beam generated at FACET-II provides the unique opportunity to investigate the effects of beam-driven GV/m fields in dielectrics exceeding meter-long interaction lengths. The diverse range of phenomena to be explored, such as material response in the terahertz regime, suppression of high-field pulse damping effects, advanced geometry structures, and methods for beam break up (BBU) mitigation, all within a single UHV vacuum vessel, requires flexibility and precision in the experimental layout. We present here details of the experimental design for the dielectric program at FACET-II. Specifically, consideration is given to the alignment of the dielectric structures due to the extreme fields associated with the electron beam, as well as implementation of electron beam and Cherenkov radiation-based diagnostics.
RadiaBeam, Santa Monica, California, USA
RadiaSoft LLC, Boulder, Colorado, USA
ANL, Lemont, Illinois, USA
UCLA, Los Angeles, California, USA
The plasma photocathode concept, whereby a two-species gas mixture is used to generate a beam -driven accelerating wakefield and a laser-ionized generation of a witness beam, was recently experimentally demonstrated. In a variation of this concept, a beam-driven dielectric wakefield accelerator is employed, filled with a neutral gas for laser-ionization and creation of a witness beam. The dielectric wakefields, in the terahertz regime, provide comparatively modest timing requirements for the injection phase of the witness beam. In this paper, we provide an update on the progress of the experimental realization of the hybrid dielectric wakefield accelerator with laser injected witness beam at the Argonne Wakefield Accelerator (AWA), including engineering considerations for gas delivery, and preliminary simulations.
UCLA, Los Angeles, California, USA
RadiaBeam, Santa Monica, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Wakefields in dielectric structures are a useful tool for beam diagnostics and manipulation with applications including acceleration, shaping, chirping, and THz radiation generation. It is possible to use the produced THz radiation to diagnose the fields produced during the DWA interaction but, to do so, it is necessary to effectively out-couple this radiation to free space for transport to diagnostics such as a bolometer or interferometer. To this end, simulations have been conducted using CST Studio for a 10 GeV beam with FACET-II parameters in a slab-symmetric, dielectric waveguide. Various termination geometries were studied including flat cuts, metal horns, and the "Vlasov antenna". Simulations indicate that the Vlasov antenna geometry is optimal and detailed studies were conducted on a variety of dielectrics including quartz, diamond, and silicon. Multiple modes were excited and coherent Cherenkov radiation (CCR) was computationally generated for both symmetric and asymmetric beams. Finally, we include witness beams to study transport and acceleration dynamics as well as the achievable field gradients.
UCLA, Los Angeles, USA
RadiaBeam, Marina del Rey, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Future plasma acceleration experiments at FACET-II will measure betatron radiation in order to provide single-shot non-destructive beam diagnostics. We discuss three models for betatron radiation: a new idealized particle tracking code with Liénard-Wiechert radiation, a Quasi-Static Particle-in-Cell (PIC) code with Liénard-Wiechert radiation, and a full PIC code with radiation computed via a Monte-Carlo QED Method. Predictions of the three models for the E-310 experiment are presented and compared. Finally, we discuss beam parameter reconstruction from the double differential radiation spectrum.
UCLA, Los Angeles, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Intense beams, such as those in proposed plasma based linear colliders, can not only blow out electrons to form a bubble but can also attract ions towards the beam. This violates the assumption that the ions are stationary on the timescale of the beam, which is a common assumption for shorter and less intense beams. While some research has been done on understanding the physics of ion motion in blowout Plasma Wakefield Accelerators (PWFAs), this research has almost exclusively focused on cylindrically symmetric beams, rather than flat asymmetric emittance beams which are often used in linear colliders in order to minimize beamstrahlung at the final focus. This contribution investigates both analytically and computationally ion motion of a flat beam scenario in order to understand the basic physics as well as how to mitigate emittance growth, beam hosing and quadrupole.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
ASC HMTI, Minsk, Belarus
X-ray laser oscillator, dubbed XLO, is a recently proposed project at SLAC to build the first population inversion X-ray laser. XLO utilizes a train of XFEL SASE pulses to pump atomic core-states. The resulting amplified spontaneous emission radiation is recirculated in a backscattering Bragg cavity and subsequently amplified. XLO could provide fully coherent, transform-limited X-ray pulses with 50 meV bandwidth and 1e10 photons. Currently, XLO is being considered for operation at the copper K-alpha line at 8048 eV. In this work, we focus on the optimization of gain medium delivery in the XLO cavity. We consider a fast, subsonic jet of copper nitrate solution, moving through a cylindrical nozzle. We focus on the nozzle geometry optimization and possible diagnostics of the jet-XFEL interaction point.
INFN/LNS, Catania, Italy
INFN/LNF, Frascati, Italy
SLAC, Menlo Park, California, USA
Sapienza University of Rome, Rome, Italy
INFN-Roma1, Rome, Italy
UCLA, Los Angeles, California, USA
University of Catania, Catania, Italy
TUXB06
Enrico Fermi Institute, University of Chicago, Chicago, Illinois, USA
UCLA, Los Angeles, USA
Northern Illinois University, DeKalb, Illinois, USA
ANL, Lemont, Illinois, USA
To overcome limits on total acceleration achievable in plasma wakefield accelerators, specially shaped drive beams can be used to increase the transformer ratio, implying that the drive beam deceleration is minimized in comparison with acceleration obtained in the wake. We report the results of a nonlinear PWFA, high transformer ratio experiment using high-charge, longitudinally asymmetric drive beams in a plasma cell. An emittance exchange process is used to generate variable drive current profiles, in conjunction with a long (multiple plasma wavelength) witness beam. The witness beam is energy-modulated by the wakefield, yielding a response that contains detailed spectral information in a single-shot measurement. Using these methods, we generate a variety of beam profiles and characterize the wakefields, directly observing beam-loaded transformer ratios up to 7.8. Further, a spectrally-based current reconstruction technique, validated by 3D particle-in-cell simulations, is introduced to obtain the drive beam profile from the decelerating wakefield data.
UCLA, Los Angeles, California, USA
Pulsar Physics, Eindhoven, The Netherlands
Micro-bunched current profiles have recently gained traction as an alternative to bulk compression in certain free-electron laser applications. The attraction of the micro-bunched structure is owed in part to its promise to minimize deleterious effects associated with coherent synchrotron radiation during compression. Simultaneously, these profiles push the boundaries of traditional one-dimensional CSR simulation models which assume the bunch length to far exceed the transverse beam size in the bunch rest frame - an assumption which may be violated by the sub-micron length micro-bunches. Here we present simulation studies of the impact of three-dimensional CSR effects on micro-bunching based compression schemes using the General Particle Tracer code.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
The ultra-compact x-ray free-electron laser (UC-XFEL), described in [J. B. Rosenzweig, et al. 2020 New J. Phys. 22 093067], combines several cutting edge beam physics techniques and technologies to realize an x-ray free electron laser at a fraction of the cost and footprint of existing XFEL installations. These elements include cryogenic, normally conducting RF structures for both the gun and linac, IFEL bunch compression, and short-period undulators. In this work, several stepping-stone, demonstrator scenarios under discussion for the UCLA SAMURAI Laboratory are detailed and simulated, employing different subsets of these elements. The cost, footprint, and technology risk for these scenarios are considered in addition to the anticipated engineering and physics experience gained.
UCLA, Los Angeles, California, USA
Solenoids for beam transport are typically wound helically, with each layer of wire being laid down on top of the previous, or as "pancakes" where the wire is wound radially in before crossing over and winding out. Both of these approaches break rotational symmetry and introduce higher-order multipole moments which can be deleterious to beam emittance. For high brightness beams, this can be particularly problematic. To this end, a solenoid employing multi-start foil windings is simulated and compared to conventional choices. With appropriate design, this approach can forbid certain multipoles by symmetry.
UCLA, Los Angeles, California, USA
ANL, Lemont, Illinois, USA
Enrico Fermi Institute, University of Chicago, Chicago, Illinois, USA
Drive and witness beams with variable current profiles and bunch spacing can be generated using an emittance exchange beamline (EEX) in conjunction with transverse masks. Recently, this approach was used to create advanced driver profiles and demonstrate record-breaking plasma wakefield transformer ratios [Roussel, R., et al., Phys. Rev. Lett. 124, 044802 (2020)], a crucial advancement for effective witness acceleration. Presently, these transverse masks are individually laser cut, making the refinement of beam profiles a slow process. Instead, we have proposed the used of a UHV compatible multileaf collimator (MLC) to replace these masks. An MLC permits real-time adjustment of the beam masking, permitting faster optimization in a manner highly synergistic with machine learning. Beam dynamics simulations have shown that practical MLCs offer resolution that is functionally equivalent to that offered by the laser cut masks. In this work, the engineering considerations and practical implementation of such a system at the AWA facility are discussed and the results of benchtop tests are presented.
* Roussel, Ryan, et al. PRL 124.4 (2020): 044802
UCLA, Los Angeles, California, USA
RadiaSoft LLC, Boulder, Colorado, USA
USTRAT/SUPA, Glasgow, United Kingdom
Colorado University at Boulder, Boulder, Colorado, USA
The advent of optically triggered injection in multi component plasma wakefield accelerators has been shown to enable a substantial increase in witness electron beam quality. Here we present a novel way of using the overlap of laser and beam radial fields to locally liberate electrons from the tunneling ionization of the non-ionized gas species. These liberated ultracold electrons gain sufficient energy to be trapped in the accelerating phase at the back of the plasma blowout. This method of controlled injection has advantages in precision timing since injection is locked to peak beam current and has the potential of generating beams with very low emittance and energy spread. This method has been investigated using particle-in-cell (PIC) simulations. This scenario corresponds to a planned experiment, E-312, at SLAC’s FACET-II facility.
UCLA, Los Angeles, California, USA
RadiaBeam, Santa Monica, California, USA
ANL, Lemont, Illinois, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
In future plasma wakefield acceleration-based scenarios for linear colliders, beams with highly asymmetric emittance are expected. In this case, the blowout region is no longer axisymmetric, but elliptical in cross-section, which implies that the focusing is not equal in the two transverse planes. In this paper, we analyze simulations for studying the asymmetries in flat-beam driven plasma acceleration using the round-to-flat-beam transformer at the Argonne Wakefield Accelerator. Beams with high charge and emittance ratios, in excess of 100:1, are routinely available at the AWA. We use particle-in-cell codes to compare various scenarios including a weak blowout, where the plasma focusing effect exhibits higher order mode asymmetry. Further, practical considerations for tunable plasma density using capillary discharge and laser ionization are compared for implementation into experimental designs.
UCLA, Los Angeles, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Periodic electron bunch trains spaced at the laser wavelength created via inverse free electron laser (IFEL) bunching can be used to resonantly excite plasmas in the quasi-nonlinear (QNL) regime. The excitation can produce plasma blowout conditions using very low emittance beams despite having a small charge per bunch. The resulting plasma density perturbation is extremely nonlinear locally, but preserves the resonant response of the plasma electrons at the plasma frequency. This excitation can produce plasma blowout conditions using very low emittance beams despite having a small charge per bunch. To match the resonance condition, the plasma wavelength has to be equal to the laser period of a few microns. This corresponds to a high density plasma resulting in extremely large wakefield amplitudes. Matching the beam into such a dense plasma requires an extremely short focusing beta function. We present the beam-plasma interaction using quasi-static particle-in-cell (PIC) simulations and discuss the micro-bunching and focusing mechanism required for this scheme which would be a precursor to the planned experiment, E-317, at SLAC’s FACET-II facility.
Sapienza University of Rome, Rome, Italy
RadiaBeam, Santa Monica, California, USA
INFN/LNF, Frascati, Italy
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
In this paper, we present a new class of a hybrid photoinjector in C-Band. This project is the effort result of a UCLA/Sapienza/INFN-LNF/SLAC/RadiaBeam collaboration. This device is an integrated structure consisting of an initial standing-wave 2.5-cell gun connected to a traveling-wave section at the input coupler. Such a scheme nearly avoids power reflection back to the klystron, removing the need for a high-power circulator. It also introduces strong velocity bunching due to a 90° phase shift in the accelerating field. A relatively high cathode electric field of 120 MV/m produces a ~4 MeV beam with ~20 MW input RF power in a small foot-print. The beam transverse dynamics are controlled with a ~0.27 T focusing solenoid. We show the simulation results of the RF/magnetic design and the optimized beam dynamics that shows 6D phase space compensation at 250 pC. Proper beam shaping at the cathode yields a ~0.5 mm-mrad transverse emittance. A beam waist occurs simultaneously with a longitudinal focus of <400 fs rms and peak current >600 A. We discuss application of this injector to an Inverse-Compton Scattering system and present corresponding start-to-end beam dynamics simulations.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
PBPL, Los Angeles, USA
The University of Liverpool, Liverpool, United Kingdom
UCLA has recently constructed SAMURAI, a new radiation bunker and laser infrastructure for advanced accelerator research. In its first phase, we will build a 30 MeV photoinjector with an S-band hybrid gun. The beam dynamics simulation for this beamline showed the generation of the beam with the emittance 2.4 um and the peak current 270 A. FIR-FEL experiments are planned in this beamline. The saturation peak power was expected at 170 MW.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Producing higher brightness beams at the cathode is one of the main focuses for future electron beam applications. For photocathodes operating close to their emission threshold, the cathode lattice temperature begins to dominate the minimum achievable intrinsic emittance. At UCLA, we are designing a radiofrequency (RF) test bed for measuring the temperature dependence of the mean transverse energy (MTE) and quantum efficiency for a number of candidate cathode materials. We intend to quantify the attainable brightness improvements at the cathode from cryogenic operation and establish a proof-of-principle cryogenic RF gun for future studies of a 1.6 cell cryogenic photoinjector for the UCLA ultra compact XFEL concept (UC-XFEL). The test bed will use a C-band 0.5-cell RF gun designed to operate down to 40K, producing an on-axis accelerating field of 120 MV/m. The cryogenic system uses conduction cooling and a load-lock system is being designed for transport and storage of air-sensitive high brightness cathodes.
UCLA, Los Angeles, California, USA
University of Chicago, Chicago, Illinois, USA
Nanostructured photocathodes offer a unique functionality not possible in traditional photocathodes, increasing beam brightness by reducing the effective emission area. Inspired by field emitter tips, we examine a possible extension for higher current operation, an extended nanoblade capable of producing asymmetric emittance electron beams. A full understanding of emission is necessary to establish the effectiveness of nanoblades as usable cathode for electron accelerators. Utilizing wet etching of silicon wafers, we arrive at a robust sample capable of dissipating incident laser fields in excess of 20 GV/m without permanent damage. Initial predictions and experiments from the nanotip case predict energies up to the keV scale from electron rescattering and fine features on the order of the photon quantum. We will present initial electron data from 800 nm Ti:S laser illumination and measurements of a focused 1 keV beam.
UCLA, Los Angeles, California, USA
Cryogenic regimes of operation are, for various reasons, highly advantageous for normal conducting accelerator structures. Liquid cryogen-based systems are costly to implement and maintain. As a result, developing cryogenic test facilities at a smaller more cost effective scale using cryo-coolers is attractive. Before real implementations of a cryo-cooler based beamline, a significant amount of information is necessary regarding the behavior and properties of various components and materials at cryogenic temperatures. Finding this information lacking for our particular beamline case and by extension similar electron beamlines, we endeavor to generate a thorough beamline-relevant material and component properties down to the range of a liquid nitrogen temperatures (77 K) and the nominal operating temperature of a modest Gifford-McMahon cryocooler (45 K).
UCLA, Los Angeles, California, USA
Cornell University, Ithaca, New York, USA
Laser-induced field emission of electrons from metallic nanotips has been well studied. Unfortunately, nanotips suffer low damage thresholds with enhanced fields around 10 GV/m. The nanoblade, akin to a nanotip extruded in one lateral dimension, may reach upwards of 40 GV/m due to its robust thermomechanical properties. This increased surface field promises brighter electron emissions. We perform simulations of strong-field emissions from metallic nanoblades via the 1-D time-dependent Schr\"odinger equation with effective Jellium and nonlinear collective image charge potentials, including the strong field gradients induced by the nanostructure. We measure spectra and yields and compare to recent experiments. Potential analytical forms of image potential limited yield for a spectrally rich emission are presented. Calculations of mean transverse energy are provided as well as a prospective method of mitigation with the goal of increasing brightness.
Sapienza University of Rome, Rome, Italy
INFN/LNF, Frascati, Italy
INFN-Roma1, Rome, Italy
INFN-Roma, Roma, Italy
UCLA, Los Angeles, California, USA
The interaction of charged beams with the surrounding accelerating structures requires a thorough investigation due to potential negative effects on the phase space quality. Indeed, the wakefields acting back on the beam are responsible for emittance dilution and instabilities, such as the beam break-up, which limit the performances of electron-based radiation sources and linear colliders. Here we introduce a new tracking code which is meant to investigate the effects of short-range transverse wakefields in linear accelerators. The tracking is based on quasi-analytical models for the beam dynamics which, in addition to the basic optics specified by the applied fields, include dipole wakefield forces and a simple approach to account for space-charge effects. Such features provide a reliable tool which easily allows to inspect the performances of a linac. To validate the model, a parallel analysis for a reference case is performed with well-known beam dynamics codes, and comparisons are shown. As an illustrative application, we discuss a study on alignment tolerances evaluating the emittance growth induced by misaligned accelerating sections.
Sapienza University of Rome, Rome, Italy
INFN-Roma, Roma, Italy
UCLA, Los Angeles, California, USA
INFN/LNF, Frascati, Italy
A new hybrid C-band photo-injector, consisting of a standing wave RF gun connected to a traveling wave structure, operating in a velocity bunching regime, has shown to produce an extremely high brightness beam with very low emittance and a very high peak current through a simultaneous compression of the beam in the longitudinal and transverse dimensions. A beam slice analysis has been performed in order to understand the evolution of the relevant physical parameters of the beam in the longitudinal and transverse phase spaces along the structure. A simple model for the envelope equation has been developed to describe the beam behavior in this particular dynamics regime that we term "triple waist", since all three dimensions reach a minimum condition almost simultaneously. The model analyzes the transverse envelope dynamics at the exit of the hybrid photo-injector, in the downstream drift where the triple waist occurs. The analytical solutions obtained from the envelope equation are compared with the simulations, showing a good agreement. Finally, these results have been analyzed also in terms of plasma oscillation to obtain a further physical interpretation of the beam dynamics.
UCLA, Los Angeles, California, USA
Michigan State University, East Lansing, Michigan, USA
Northern Illinois University, DeKalb, Illinois, USA
SLAC, Menlo Park, California, USA
The dielectric wakefield acceleration (DWA) program at FACET produced a multitude of new physics results that range from GeV/m acceleration to the discovery of high field-induced conductivity in THz waves, and beyond, to a demonstration of positron-driven wakes. Here we review the rich program now developing in the DWA experiments at FACET-II. With increases in beam quality, a key feature of this program is extended interaction lengths, near 0.5 m, permitting GeV-class acceleration. Detailed physics studies in this context include beam breakup and its control through the exploitation of DWA structure symmetry. The next step in understanding DWA limits requires the exploration of new materials with low loss tangent, large bandgap, and improved thermal characteristics. Advanced structures with photonic features for mode confinement and exclusion of the field from the dielectric, as well as quasi-optical handling of coherent Cerenkov signals is discussed. Use of DWA for laser-based injection and advanced temporal diagnostics is examined.
UCLA, Los Angeles, California, USA
We propose here to exploit the quadrupole wakefields in an alternating symmetry slab-based dielectric wakefield accelerator (DWA) to produce second-order focusing. The resultant focusing is found to be strongly dependent on longitudinal position in the bunch. We analyze this effect with analytical estimates and electromagnetic PIC simulations. We examine the use of this scenario to induce beam stability in very high gradient DWA, with positive implications for applications in linear colliders and free-electron lasers.
UCLA, Los Angeles, USA
We present the design of a Compton spectrometer for use at FACET-II. A sextupole is used for magnetic spectral analysis, giving a broad dynamic range (180 keV through 28 MeV) and the capability to capture an energy-angular double-differential spectrum in a single shot. At low gamma energies, below 1 MeV, Compton spectroscopy becomes increasingly challenging as the scattering cross-section becomes more isotropic. To extend the range of the spectrometer down to around 180 keV, we use a 3D-printed tungsten collimator at the detector plane to preferentially select forward-scattered electrons at the Compton edge.
UCLA, Los Angeles, California, USA
Queen’s University of Belfast, Belfast, Northern Ireland, United Kingdom
MPI-K, Heidelberg, Germany
SLAC, Menlo Park, California, USA
CalPoly, San Luis Obispo, California, USA
AU, Aarhus, Denmark
We present the design of a pair spectrometer for use at FACET-II, where there is a need for spectroscopy of photons having energies up to 10 GeV. Incoming gammas are converted to high-energy positron-electron pairs, which are then subsequently analyzed in a dipole magnet. These charged particles are then recorded in arrays of acrylic Cherenkov counters, which are significantly less sensitive to background x-rays than scintillator counters in this case. To reconstruct energies of single high-energy photons, the spectrometer has a sensitivity to single positron-electron pairs. Even in this single-photon limit, there is always some low-energy continuum present, so spectral deconvolution is not trivial, for which we demonstrate a maximum likelihood reconstruction. Finally, end-to-end simulations of experimental scenarios, together with anticipated backgrounds, are presented.
UCLA, Los Angeles, California, USA
The Compton spectrometer under development at UCLA for FACET-II is a versatile tool to analyze gamma-ray spectra in a single shot, in which the energy and angular position of the incoming photons are recorded by observing the momenta and position of Compton scattered electrons. We present methods to reconstruct the primary spectrum from these data via machine learning and the EM Algorithm. A multi-layer fully connected neural network is used to perform the regression task of reconstructing both the double-differential spectrum and the photon energy spectrum incident with zero angular offset. We present the expected performance of these techniques, concentrating on the achievable energy resolution.
UCLA, Los Angeles, California, USA
At UCLA’s SAMURAI Laboratory, there will be a need for beam optics to accommodate operation over a range of beam energies. We present a modular quadrupole design that, in addition to satisfying this requirement, incorporates interchangeable tapered end-pieces for mitigation of higher-order aberrations *. The design progresses in an iterative fashion, whereby the tapered shapes, generated algorithmically, are fed into a field solver, and then the aberrations of the resulting particle trajectories are calculated and minimized.
* R. Baartman, Quadrupole shapes, Phys. Rev. ST Accel. Beams 15, 074002 (2012).
UCLA, Los Angeles, California, USA
PBPL, Los Angeles, USA
Electron bunches extracted from magneto-optical traps (MOTs) via femtosecond photo-ionization and electrostatic acceleration can have significantly lower transverse emittance than emissions from traditional metal cathodes. Such MOT cathodes, however, have two drawbacks: the need for multiple trapping lasers and the limit to ~MV/m fields. Designs exist for MOTs which only require one trapping laser. Our RF simulations in High-Frequency Structure Simulator (HFSS) indicate that the cone MOT is the only one compatible with high gradient RF cavities. We present the combination of the two, an RF cavity with a cone-MOT as part of its geometry. It only requires one trapping laser and can use much higher fields. The geometry of the chamber is compatible with a wide range of MOT species, which allows the search for one which is compatible with copper cavities.