ECRIS2016 - List of Keywords (MMI)

Paper	Title	Other Keywords	Page
TUAO01	The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS	ion, plasma, proton, injection	39
	L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Massara, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A. Spartà, G. Torrisi, S. Vinciguerra INFN/LNS, Catania, Italy S. Di Martino, P. Nicotra Si.A.Tel SRL, Catania, Italy
	A 2.45 GHz ' 0.1 T microwave discharge Proton Source has been designed and assembled at INFN-LNS for the European Spallation Source (PS-ESS) in order to produce pulsed beams of protons up to 74 mA nominal current, at 75 keV of energy, with a transverse emittance containing 99 % of the nominal proton current below 2.25 π mm mrad and a beam stability of ± 2 %. The challenging performances of the machine have triggered specific studies on the maximization of the proton fraction inside the plasma and of the overall plasma density, including dedicated modelling of the wave-to-plasma interaction and ionization processes. The plasma conditioning phase started in July and excellent RF to plasma coupling, more than 99.5% is evident since the beginning. Reflected power fluctuation less than 0.05 % was measured providing a great starting point to reach the beam stability requested by the ESS accelerator.
	Slides TUAO01 [14.571 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-TUAO01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUAO05	First Plasma of the PHOENIX V3 ECR Ion Source	ion, plasma, ECR, injection	48
	T. Thuillier, J. Angot, L. Bonny, J. Jacob, T. Lamy, P. Sole LPSC, Grenoble Cedex, France J.L. Flambard, L. Maunoury GANIL, Caen, France T. Kalvas JYFL, Jyväskylä, Finland C. Peaucelle IN2P3 IPNL, Villeurbanne, France
	Funding: This project was partially funded by the EU Grant Agreement 283745. PHOENIX V3 is an upgrade of the PHOENIX V2 ECR ion source granted by the European CRISP project. This new ECRIS features a larger plasma chamber and a re-duced vacuum pressure under operation. The V3 source will replace the V2 one on the SPIRAL2 accelerator in 2018. The first plasma of PHOENIX V3 was achieved on May 9th 2016. The early commissioning of the V3 source at low 18 GHz power demonstrates as expected an en-hancement of the high charge state production and Ar¹⁴⁺ intensity already exceeds the V2 one. Further enhance-ments are expected the outgassing will be achieved and the full RF power will be injected in the source.
	Slides TUAO05 [7.050 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-TUAO05
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECO01	Intermediate Commissioning Results of the Required 140 mA/100 keV CW D⁺ ECR Injector of LIPAc, IFMIF's Prototype	ion, emittance, rfq, plasma	67
	B. Bolzon, N. Chauvin, R. Gobin, F. Senée CEA/IRFU, Gif-sur-Yvette, France P.-Y. Beauvais, H. Dzitko F4E, Germany L. Bellan, M. Comunian, E. Fagotti, A. Pisent INFN/LNL, Legnaro (PD), Italy L. Bellan Univ. degli Studi di Padova, Padova, Italy P. Cara, R. Heidinger Fusion for Energy, Garching, Germany F. Harrault CEA/DSM/IRFU, France R. Ichimiya, A. Ihara, A. Kasugai, T. Kitano, M. Komata, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto QST, Aomori, Japan J. Knaster, A. Marqueta, K. Nishiyama, Y. Okumura, G. Pruneri, F. Scantamburlo IFMIF/EVEDA, Rokkasho, Japan
	The LIPAc accelerator aims to operate in Rokkasho Fusion Institute a 125 mA/CW deuteron beam at 9 MeV to validate the concept of IFMIF's accelerators that will operate in CW 125 mA at 40 MeV. The 2.45 GHz ECR injector developed by CEA-Saclay is designed to deliver 140 mA/100 keV CW D⁺ beam with 99% D⁺ fraction ratio. Its LEBT relies on a dual solenoid focusing system to transport and match the beam into the RFQ. The normalized RMS emittance at the RFQ injection cone is required to be within 0.25π mm·mrad to allow 96% transmission through the 9.81 m long RFQ. An equal perveance H⁺ beam of half current and half energy as nominal with D⁺ is used to avoid activation during commissioning. The injector commissioning at Rokkasho is divided into three phases to characterize the emittance between the two solenoids of the LEBT (A1) and just downstream the RFQ injection cone (A2) and the extraction system of the source (A3). Phase A1 has been achieved and phase A2 continues in 2016 in order to reach the required beam parameters and to match the beam into the RFQ. This paper reports the commissioning results of phase A1 and the intermediate ones of phase A2 for H⁺ and D⁺ beams.
	Slides WECO01 [4.783 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-WECO01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP15	Design, Construction and Commissioning of the New Superconducting Ion Source AISHa	ion, plasma, ECR, injection	109
	L. Celona, G. Castro, F. Chines, G. Ciavola, G. Costa, S. Gammino, O. Leonardi, S. Marletta, D. Mascali, F. Noto, G. Pastore, G. Torrisi, S. Vinciguerra INFN/LNS, Catania, Italy
	At INFN-LNS a new superconducting ECRIS named AISHa has been designed with the aim to provide highly charged ion beams with low ripple, high stability and high reproducibility, also fulfilling the needs of hospital installations (e.g. L-He free, easy to use, etc.). It is a hybrid ion source based on a permanent magnet hexapole providing 1.3 T on plasma chamber walls, and four superconducting coils for the axial trapping. The axial magnetic system is very flexible in order to minimize the hot electron component and to optimize the ECR heating by controlling the field gradients and the resonance length. The design of the hexapole aimed to minimize the demagnetization due to SC coils. The magnetic system measurement confirmed the effectiveness of the adopted solutions. Innovative solutions have been also implemented as it concerns the RF system design. It will permit to operate in single/double frequency mode, supported by variable frequency high power klystron generators, thus exploiting at the same time the FTE Frequency Tuning Effect and the Two Frequency Heating. The source has been assembled at the INFN-LNS site and the commissioning phase already started.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-WEPP15
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

TUAO01

The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS

ion, plasma, proton, injection

39

L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Massara, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A. Spartà, G. Torrisi, S. Vinciguerra
INFN/LNS, Catania, Italy
S. Di Martino, P. Nicotra
Si.A.Tel SRL, Catania, Italy

A 2.45 GHz ' 0.1 T microwave discharge Proton Source has been designed and assembled at INFN-LNS for the European Spallation Source (PS-ESS) in order to produce pulsed beams of protons up to 74 mA nominal current, at 75 keV of energy, with a transverse emittance containing 99 % of the nominal proton current below 2.25 π mm mrad and a beam stability of ± 2 %. The challenging performances of the machine have triggered specific studies on the maximization of the proton fraction inside the plasma and of the overall plasma density, including dedicated modelling of the wave-to-plasma interaction and ionization processes. The plasma conditioning phase started in July and excellent RF to plasma coupling, more than 99.5% is evident since the beginning. Reflected power fluctuation less than 0.05 % was measured providing a great starting point to reach the beam stability requested by the ESS accelerator.

Slides TUAO01 [14.571 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-TUAO01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUAO05

First Plasma of the PHOENIX V3 ECR Ion Source

ion, plasma, ECR, injection

48

T. Thuillier, J. Angot, L. Bonny, J. Jacob, T. Lamy, P. Sole
LPSC, Grenoble Cedex, France
J.L. Flambard, L. Maunoury
GANIL, Caen, France
T. Kalvas
JYFL, Jyväskylä, Finland
C. Peaucelle
IN2P3 IPNL, Villeurbanne, France

Funding: This project was partially funded by the EU Grant Agreement 283745.
PHOENIX V3 is an upgrade of the PHOENIX V2 ECR ion source granted by the European CRISP project. This new ECRIS features a larger plasma chamber and a re-duced vacuum pressure under operation. The V3 source will replace the V2 one on the SPIRAL2 accelerator in 2018. The first plasma of PHOENIX V3 was achieved on May 9th 2016. The early commissioning of the V3 source at low 18 GHz power demonstrates as expected an en-hancement of the high charge state production and Ar¹⁴⁺ intensity already exceeds the V2 one. Further enhance-ments are expected the outgassing will be achieved and the full RF power will be injected in the source.

Slides TUAO05 [7.050 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-TUAO05

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECO01

Intermediate Commissioning Results of the Required 140 mA/100 keV CW D⁺ ECR Injector of LIPAc, IFMIF's Prototype

ion, emittance, rfq, plasma

67

B. Bolzon, N. Chauvin, R. Gobin, F. Senée
CEA/IRFU, Gif-sur-Yvette, France
P.-Y. Beauvais, H. Dzitko
F4E, Germany
L. Bellan, M. Comunian, E. Fagotti, A. Pisent
INFN/LNL, Legnaro (PD), Italy
L. Bellan
Univ. degli Studi di Padova, Padova, Italy
P. Cara, R. Heidinger
Fusion for Energy, Garching, Germany
F. Harrault
CEA/DSM/IRFU, France
R. Ichimiya, A. Ihara, A. Kasugai, T. Kitano, M. Komata, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
J. Knaster, A. Marqueta, K. Nishiyama, Y. Okumura, G. Pruneri, F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan

The LIPAc accelerator aims to operate in Rokkasho Fusion Institute a 125 mA/CW deuteron beam at 9 MeV to validate the concept of IFMIF's accelerators that will operate in CW 125 mA at 40 MeV. The 2.45 GHz ECR injector developed by CEA-Saclay is designed to deliver 140 mA/100 keV CW D⁺ beam with 99% D⁺ fraction ratio. Its LEBT relies on a dual solenoid focusing system to transport and match the beam into the RFQ. The normalized RMS emittance at the RFQ injection cone is required to be within 0.25π mm·mrad to allow 96% transmission through the 9.81 m long RFQ. An equal perveance H⁺ beam of half current and half energy as nominal with D⁺ is used to avoid activation during commissioning. The injector commissioning at Rokkasho is divided into three phases to characterize the emittance between the two solenoids of the LEBT (A1) and just downstream the RFQ injection cone (A2) and the extraction system of the source (A3). Phase A1 has been achieved and phase A2 continues in 2016 in order to reach the required beam parameters and to match the beam into the RFQ. This paper reports the commissioning results of phase A1 and the intermediate ones of phase A2 for H⁺ and D⁺ beams.

Slides WECO01 [4.783 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-WECO01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP15

Design, Construction and Commissioning of the New Superconducting Ion Source AISHa

ion, plasma, ECR, injection

109

L. Celona, G. Castro, F. Chines, G. Ciavola, G. Costa, S. Gammino, O. Leonardi, S. Marletta, D. Mascali, F. Noto, G. Pastore, G. Torrisi, S. Vinciguerra
INFN/LNS, Catania, Italy

At INFN-LNS a new superconducting ECRIS named AISHa has been designed with the aim to provide highly charged ion beams with low ripple, high stability and high reproducibility, also fulfilling the needs of hospital installations (e.g. L-He free, easy to use, etc.). It is a hybrid ion source based on a permanent magnet hexapole providing 1.3 T on plasma chamber walls, and four superconducting coils for the axial trapping. The axial magnetic system is very flexible in order to minimize the hot electron component and to optimize the ECR heating by controlling the field gradients and the resonance length. The design of the hexapole aimed to minimize the demagnetization due to SC coils. The magnetic system measurement confirmed the effectiveness of the adopted solutions. Innovative solutions have been also implemented as it concerns the RF system design. It will permit to operate in single/double frequency mode, supported by variable frequency high power klystron generators, thus exploiting at the same time the FTE Frequency Tuning Effect and the Two Frequency Heating. The source has been assembled at the INFN-LNS site and the commissioning phase already started.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ECRIS2016-WEPP15

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)