Keyword: status
Paper Title Other Keywords Page
TUPCAV005 Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project cavity, cryomodule, SRF, proton 448
 
  • M. Martinello, D.J. Bice, C. Boffo, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, K.E. McGee, A.V. Netepenko, J.P. Ozelis, A.I. Sukhanov, G. Wu
    Fermilab, Batavia, Illinois, USA
  • M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava
    RRCAT, Indore (M.P.), India
  • M. Bertucci, A. Bosotti, C. Pagani, R. Paparella
    INFN/LASA, Segrate (MI), Italy
  • P. Bhattacharyya, S. Ghosh, S. Ghosh, A. Mandal, S. Seth, S. Som
    VECC, Kolkata, India
  • M.P. Kelly, T. Reid
    ANL, Lemont, Illinois, USA
  • S.H. Kim, K.E. McGee, P.N. Ostroumov
    FRIB, East Lansing, Michigan, USA
  • K.K. Mistri, P.N. Prakash
    IUAC, New Delhi, India
 
  High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV005  
About • Received ※ 01 July 2021 — Accepted ※ 02 November 2021 — Issue date ※ 16 May 2022  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTEV018 Status of RF Power Coupler for HWR in RISP cryomodule, cavity, simulation, vacuum 531
 
  • S. Lee, M. Lee, Y.U. Sohn
    IBS, Daejeon, Republic of Korea
  • Y.U. Sohn
    PAL, Pohang, Republic of Korea
 
  Funding: This work was supported by the Rare Isotope Science Project of Institute for Basic Science funded by Ministry of Science and ICT and NRF of Korea 2013M7A1A1075764.
A heavy-ion accelerator facility is under construction for Rare Isotope Science Project(RISP) in Korea. Four types of super conducting cavities, QWR, HWR, SSR1, and SSR2 are developed to accelerate the ion beams. The QWR cryomodule is already installed in the tunnel. The HWR cryomodule is transport to the tunnel. Here, the status of HWR RF power coupler is presented. After the fabrication, the coupler is test with high power RF. The some of the test results are described.
 
poster icon Poster TUPTEV018 [1.740 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPTEV018  
About • Received ※ 21 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 29 April 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPFAV004 Solenoid Automatic Turn-On and Degaussing for FRIB Cryomodules solenoid, controls, cryomodule, MMI 737
 
  • W. Chang, Y. Choi, J.T. Popielarski, K. Saito, T. Xu, C. Zhang
    FRIB, East Lansing, Michigan, USA
 
  The superconducting driver linac for the Facility for Rare Isotope Beams (FRIB) will accelerate heavy ions to 200 MeV per nucleon. The linac includes 46 SRF cryomodules, with a total of 69 solenoid packages for beam focusing and steering. For efficient beam commissioning and future operation, all of the solenoids must be turned on and reach a stable operating condition in a short time. Additionally, when a warm-up of the cryomodules is needed, degaussing of the solenoid packages is needed to minimize the residual magnetic field in the SRF cavities. An automatic turn-on and degaussing program had been implemented for FRIB cryomodules to meet these requirements. This paper will describe the design, development, and implementation of the automated solenoid control program.  
poster icon Poster THPFAV004 [1.863 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPFAV004  
About • Received ※ 21 June 2021 — Revised ※ 19 September 2021 — Accepted ※ 15 December 2021 — Issue date ※ 01 March 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPCAV003 Impact of Vertical Electropolishing with Flipping System on Removal Uniformity and Surface State: Study with 9-Cell Niobium Coupon Cavity cavity, cathode, experiment, niobium 783
 
  • K. Nii, V. Chouhan, Y.I. Ida, T.Y. Yamaguchi
    MGH, Hyogo-ken, Japan
  • H. Hayano, S. Kato, H. Monjushiro, T. Saeki
    KEK, Ibaraki, Japan
 
  We have been developing a vertical electropolishing (VEP) method for niobium superconducting RF cavities using a novel setup that allows periodic flipping of the cavity to put it upside down in the VEP process. The purpose of using the novel setup named as flipping system is to achieve uniform removal and smooth surface of the cavity. Previously, we have already introduced the VEP system and showed the preliminary results of VEP performed with the flipping system. In this article, we report VEP results obtained with a nine-cell coupon cavity. The results include detail on coupon currents with I-V curves for coupons, and impact of the cavity flipping on removal uniformity and surface morphology of the cavity.  
poster icon Poster THPCAV003 [1.266 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPCAV003  
About • Received ※ 19 June 2021 — Revised ※ 10 August 2021 — Accepted ※ 22 October 2021 — Issue date ※ 23 November 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPTEV014 Managing Procurements in the Time of Covid-19: SNS-PPU as a Case Study operation, site, HOM, cryomodule 863
 
  • K.M. Wilson, G. Cheng, E. Daly, N.A. Huque, T. Huratiak, M. Laney, K. Macha, D.J. Maddox, M. Marchlik, P.D. Owen, T. Peshehonoff, M. Torres, M. Wiseman
    JLab, Newport News, Virginia, USA
 
  Funding: Supported by the Dept of Energy, Office of Nuclear Physics under contract DE-AC05-06OR23177 (JSA); and by UT-B which manages Oak Ridge National Laboratory under contract DE-AC05-00OR22725.
In early 2020, COVID-19 swept across the world. The accelerator industry, like many others, was impacted by disease, delays, shortages, and new working conditions. All Thomas Jefferson National Accelerator Facility (JLab) employees were sent home in mid-March 2020, with many still working remotely now. At the time, JLab was working on the Proton Power Upgrade (PPU) to the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). Procurements had been placed and were being managed, parts were being received and inspected. This paper details the JLab procurement plan for the SNS PPU project, and the mitigations that were developed to continue to support this project smoothly under the limitations imposed by COVID-19.
 
poster icon Poster THPTEV014 [1.081 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPTEV014  
About • Received ※ 15 June 2021 — Revised ※ 30 November 2021 — Accepted ※ 21 January 2022 — Issue date ※ 01 May 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)