RuPAC2021 - List of Authors (Lisov, V.I.)

Paper	Title	Page
MOPSA48	Simulation of the Electrostatic Deflector of DC140 Cyclotron	202
	A.S. Zabanov, V.I. Lisov JINR/FLNR, Moscow region, Russia K. Gikal, G.G. Gulbekyan, I.V. Kalagin, N.Yu. Kazarinov, S.V. Mitrofanov, V.A. Semin JINR, Dubna, Moscow Region, Russia
	The main activities of Flerov Laboratory of Nuclear Reactions, following its name - are related to fundamental science, but in parallel a lot of efforts are paid for practical applications. Currently, work is underway to create an irradiation facility based on the DC140 cyclotron for applied research at FLNR. The beam transport system will have three experimental beam lines for testing of electronic components (avionics and space electronics) for radiation hardness, for ion-implantation nanotechnology and for radiation materials science. The DC140 cyclotron is intended to accelerate heavy ions with mass-to-charge ratio A/Z within interval from 5 to 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The extraction system based on four main elements - electrostatic deflector, focusing magnetic channel, Permanent Magnet Quadrupole lens and steering magnet. The results of numerical simulation of the electrostatic deflector of DC140 cyclotron are presented in this this paper.
	Poster MOPSA48 [1.255 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA48
About •	Received ※ 22 August 2021 — Accepted ※ 20 September 2021 — Issued ※ 09 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA49	DC140 Cyclotron, Trajectory Analysis of Beam Acceleration and Extraction	205
	I.A. Ivanenko, N.Yu. Kazarinov JINR, Dubna, Moscow Region, Russia V.I. Lisov JINR/FLNR, Moscow region, Russia
	At the present time, the activities on creation of the new heavy-ion isochronous cyclotron DC140 are carried out at Joint Institute for Nuclear Research. DC140 facility is intended for SEE testing of microchip, for production of track membranes and for solving of applied physics problems. Cyclotron will produce accelerated beams of ions A/Z= 5 - 5.5 and 7. 5 - 8.25 with a fixed beam energy 4.8 MeV/n and 2.124 MeV/n respectively. The variation of operation modes is provided by changing of magnetic field in the range 1.4T - 1.55T with fixed generator frequency 8.632 MHz. In this report, the results of design and simulation of the beam acceleration and extraction are presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA49
About •	Received ※ 12 September 2021 — Revised ※ 15 September 2021 — Accepted ※ 20 September 2021 — Issued ※ 02 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA50	Axial Injection System of DC140 Cyclotron of FLNR JINR	209
	N.Yu. Kazarinov, V. Bekhterev, G.G. Gulbekyan, I.A. Ivanenko, I.V. Kalagin, S.V. Mitrofanov, N.F. Osipov, V.A. Semin JINR, Dubna, Moscow Region, Russia V.I. Lisov JINR/FLNR, Moscow region, Russia
	Flerov Laboratory of Nuclear Reaction of Joint Institute for Nuclear Research continues the works under creating of FLNR JINR Irradiation Facility based on the cyclotron DC140. The facility will have three experimental beam lines for SEE testing of microchips, for production of track membranes and for solving of applied physics problems. The injection into cyclotron will be realized from the external room temperature 18 GHz ECR ion source. The systems of DC140 cyclotron such as axial injection, main magnet, RF- and extraction systems and beam lines are the reconstruction of the DC72 cyclotron ones. The acceleration in DC140 cyclotron is carried out for two values of harmonic number h = 2,3 of heavy ions with mass-to-charge ratio A/Z within two intervals 5 - 5.5 and 7.5 - 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass, correspondingly. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The design of the axial injection system of the DC140 cyclotron is presented in this report.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA50
About •	Received ※ 27 August 2021 — Revised ※ 07 September 2021 — Accepted ※ 10 September 2021 — Issued ※ 23 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA51	The Extraction System of DC140 Cyclotron	213
	V.I. Lisov, A.A. Protasov, A.S. Zabanov JINR/FLNR, Moscow region, Russia K. Gikal, G.G. Gulbekyan, I.A. Ivanenko, G.N. Ivanov, I.V. Kalagin, N.Yu. Kazarinov, S.V. Mitrofanov, N.F. Osipov, V.A. Semin JINR, Dubna, Moscow Region, Russia
	The main activities of Flerov Laboratory of Nuclear Reactions, following its name - are related to fundamental science, but, in parallel, plenty of efforts are paid for practical applications. For the moment continues the works under creating irradiation facility based on the cyclotron DC140 which will be dedicated machine for applied researches in FLNR. The beam transport system will have three experimental beam lines for testing of electronic components (avionics and space electronics) for radiation hardness, for ion-implantation nanotechnology and for radiation materials science. The DC140 cyclotron is intended for acceleration of heavy ions with mass-to-charge ratio A/Z within interval from 5 to 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The following elements are used to extract the beam from the cyclotron: electrostatic deflector, focusing magnetic channel, Permanent Magnet Quadrupole lens and steering magnet. The design of the beam extraction system of DC140 cyclotron are presented in this report.
	Poster MOPSA51 [0.886 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA51
About •	Received ※ 30 August 2021 — Accepted ※ 20 September 2021 — Issued ※ 24 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRA01	Peculiarities of Producing 48Ca, 48Ti, 52Cr Beams at the DC-280 Cyclotron	93
	K. Gikal, S.L. Bogomolov, I.A. Ivanenko, N.Yu. Kazarinov, D.K. Pugachev, V.A. Semin JINR, Dubna, Moscow Region, Russia V.I. Lisov, A.A. Protasov JINR/FLNR, Moscow region, Russia
	The first beam of 84Kr¹⁴⁺ ions was accelerated in the DC-280 on December 26, 2018 and extracted to the ion transport channel on January 17, 2019. In March 2019, beams of accelerated 84Kr⁺14 ions with intensity of 1.36 pmkA and 12C⁺2 ions with and intensity of 10 pmkA were extracted from the DC-280 to the beam transport channel with energy about 5.8 MeV/nucleon. In 2020-2021 years, beams of 48Ca⁷⁺,10+ ions with intensity up to 10,6 pmkA were accelerated and 7,1 pmkA were extracted from the DC-280 to the beam transport channel with energy about 4,51 - 5,29 MeV/nucleon. In 2021 year, beams of accelerated 52,54Cr¹⁰⁺ ions with intensity up to 2,5 pmkA were extracted from the DC-280 to the beam transport channel with energy about 5,05 MeV/nucleon and beams of 48Ti⁷⁺ with intensity up to 1pmkA and with energy about 4,94 MeV/nucleon The main task of the new accelerator is implementation of the long-term program of researches on the SHE Factory aimed on synthesis of new elements (Z>118) and detailed studying of nuclear- physical and chemical properties of earlier opened 112-118 ones.
	Slides FRA01 [9.228 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-FRA01
About •	Received ※ 18 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 16 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation of the Electrostatic Deflector of DC140 Cyclotron

202

A.S. Zabanov, V.I. Lisov
JINR/FLNR, Moscow region, Russia
K. Gikal, G.G. Gulbekyan, I.V. Kalagin, N.Yu. Kazarinov, S.V. Mitrofanov, V.A. Semin
JINR, Dubna, Moscow Region, Russia

The main activities of Flerov Laboratory of Nuclear Reactions, following its name - are related to fundamental science, but in parallel a lot of efforts are paid for practical applications. Currently, work is underway to create an irradiation facility based on the DC140 cyclotron for applied research at FLNR. The beam transport system will have three experimental beam lines for testing of electronic components (avionics and space electronics) for radiation hardness, for ion-implantation nanotechnology and for radiation materials science. The DC140 cyclotron is intended to accelerate heavy ions with mass-to-charge ratio A/Z within interval from 5 to 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The extraction system based on four main elements - electrostatic deflector, focusing magnetic channel, Permanent Magnet Quadrupole lens and steering magnet. The results of numerical simulation of the electrostatic deflector of DC140 cyclotron are presented in this this paper.

Poster MOPSA48 [1.255 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA48

About •

Received ※ 22 August 2021 — Accepted ※ 20 September 2021 — Issued ※ 09 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA49

DC140 Cyclotron, Trajectory Analysis of Beam Acceleration and Extraction

205

I.A. Ivanenko, N.Yu. Kazarinov
JINR, Dubna, Moscow Region, Russia
V.I. Lisov
JINR/FLNR, Moscow region, Russia

At the present time, the activities on creation of the new heavy-ion isochronous cyclotron DC140 are carried out at Joint Institute for Nuclear Research. DC140 facility is intended for SEE testing of microchip, for production of track membranes and for solving of applied physics problems. Cyclotron will produce accelerated beams of ions A/Z= 5 - 5.5 and 7. 5 - 8.25 with a fixed beam energy 4.8 MeV/n and 2.124 MeV/n respectively. The variation of operation modes is provided by changing of magnetic field in the range 1.4T - 1.55T with fixed generator frequency 8.632 MHz. In this report, the results of design and simulation of the beam acceleration and extraction are presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA49

About •

Received ※ 12 September 2021 — Revised ※ 15 September 2021 — Accepted ※ 20 September 2021 — Issued ※ 02 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA50

Axial Injection System of DC140 Cyclotron of FLNR JINR

209

N.Yu. Kazarinov, V. Bekhterev, G.G. Gulbekyan, I.A. Ivanenko, I.V. Kalagin, S.V. Mitrofanov, N.F. Osipov, V.A. Semin
JINR, Dubna, Moscow Region, Russia
V.I. Lisov
JINR/FLNR, Moscow region, Russia

Flerov Laboratory of Nuclear Reaction of Joint Institute for Nuclear Research continues the works under creating of FLNR JINR Irradiation Facility based on the cyclotron DC140. The facility will have three experimental beam lines for SEE testing of microchips, for production of track membranes and for solving of applied physics problems. The injection into cyclotron will be realized from the external room temperature 18 GHz ECR ion source. The systems of DC140 cyclotron such as axial injection, main magnet, RF- and extraction systems and beam lines are the reconstruction of the DC72 cyclotron ones. The acceleration in DC140 cyclotron is carried out for two values of harmonic number h = 2,3 of heavy ions with mass-to-charge ratio A/Z within two intervals 5 - 5.5 and 7.5 - 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass, correspondingly. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The design of the axial injection system of the DC140 cyclotron is presented in this report.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA50

About •

Received ※ 27 August 2021 — Revised ※ 07 September 2021 — Accepted ※ 10 September 2021 — Issued ※ 23 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPSA51

The Extraction System of DC140 Cyclotron

213

V.I. Lisov, A.A. Protasov, A.S. Zabanov
JINR/FLNR, Moscow region, Russia
K. Gikal, G.G. Gulbekyan, I.A. Ivanenko, G.N. Ivanov, I.V. Kalagin, N.Yu. Kazarinov, S.V. Mitrofanov, N.F. Osipov, V.A. Semin
JINR, Dubna, Moscow Region, Russia

The main activities of Flerov Laboratory of Nuclear Reactions, following its name - are related to fundamental science, but, in parallel, plenty of efforts are paid for practical applications. For the moment continues the works under creating irradiation facility based on the cyclotron DC140 which will be dedicated machine for applied researches in FLNR. The beam transport system will have three experimental beam lines for testing of electronic components (avionics and space electronics) for radiation hardness, for ion-implantation nanotechnology and for radiation materials science. The DC140 cyclotron is intended for acceleration of heavy ions with mass-to-charge ratio A/Z within interval from 5 to 8.25 up to two fixed energies 2.124 and 4.8 MeV per unit mass. The intensity of the accelerated ions will be about 1 pmcA for light ions (A<86) and about 0.1 pmcA for heavier ions (A>132). The following elements are used to extract the beam from the cyclotron: electrostatic deflector, focusing magnetic channel, Permanent Magnet Quadrupole lens and steering magnet. The design of the beam extraction system of DC140 cyclotron are presented in this report.

Poster MOPSA51 [0.886 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA51

About •

Received ※ 30 August 2021 — Accepted ※ 20 September 2021 — Issued ※ 24 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRA01

Peculiarities of Producing 48Ca, 48Ti, 52Cr Beams at the DC-280 Cyclotron

93

K. Gikal, S.L. Bogomolov, I.A. Ivanenko, N.Yu. Kazarinov, D.K. Pugachev, V.A. Semin
JINR, Dubna, Moscow Region, Russia
V.I. Lisov, A.A. Protasov
JINR/FLNR, Moscow region, Russia

The first beam of 84Kr¹⁴⁺ ions was accelerated in the DC-280 on December 26, 2018 and extracted to the ion transport channel on January 17, 2019. In March 2019, beams of accelerated 84Kr⁺14 ions with intensity of 1.36 pmkA and 12C⁺2 ions with and intensity of 10 pmkA were extracted from the DC-280 to the beam transport channel with energy about 5.8 MeV/nucleon. In 2020-2021 years, beams of 48Ca⁷⁺,10+ ions with intensity up to 10,6 pmkA were accelerated and 7,1 pmkA were extracted from the DC-280 to the beam transport channel with energy about 4,51 - 5,29 MeV/nucleon. In 2021 year, beams of accelerated 52,54Cr¹⁰⁺ ions with intensity up to 2,5 pmkA were extracted from the DC-280 to the beam transport channel with energy about 5,05 MeV/nucleon and beams of 48Ti⁷⁺ with intensity up to 1pmkA and with energy about 4,94 MeV/nucleon The main task of the new accelerator is implementation of the long-term program of researches on the SHE Factory aimed on synthesis of new elements (Z>118) and detailed studying of nuclear- physical and chemical properties of earlier opened 112-118 ones.

Slides FRA01 [9.228 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-FRA01

About •

Received ※ 18 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 16 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)