| Paper | Title | Page |
|---|---|---|
| TPPE061 | RF Design and Operating Performance of the BNL/AES 1.3 GHz Single Cell Superconducting RF Photocathode Electron Gun | 3514 |
|
||
|
Over the past several years Advanced Energy Systems and BNL have been collaborating on the development and testing of a fully superconducting photocathode electron gun. Over the past year we have begun to realize significant results which have been published elsewhere.* This paper will review the RF design of the gun under test and present results of its performance under various operating conditions. Results for cavity quality factor will be presented for various operating temperatures and cavity field gradients. We will discuss various methods of determining the cavity fields and the extent of agreement between them. We will also discuss future plans for testing using this gun.
*Photoemission studies on BNL/AES all niobium, Superconducting RF injector, T. Rao, these proceedings. |
||
| TPPT056 | Design of a Low Loss SRF Cavity for the ILC | 3342 |
|
||
| An international team comprising DESY, KEK, JLAB, FNAL and SLAC is collaborating on the design, fabrication and test of a low loss, 1.3 GHz 9-cell SRF structure as a potential improvement for the ILC main linac. The advantages of this structure over the TTF structure include lower cryogenic loss, shorter rise time, and less stored energy. Among the issues to be addressed in this design are HOM damping, Lorentz force detuning and multipacting. We will report on HOM damping calculations using the parallel finite element eigenmode solver Omega3P and the progress made towards an optimized design. Studies on multipacting and estimates of the Lorentz force detuning will also be presented. | ||
| TPPT071 | Preliminary Results on the Simultaneous Excitation of the TM010 and TE011 Modes in a Single Cell Niobium Cavity | 3844 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. Simultaneous excitation of both TM010 and TE011 modes has been proposed recently for superconducting photoinjector applications to take advantage of the accelerating field of the TM mode, combined with the focusing magnetic field of the TE mode. Simultaneous excitation of both modes has been carried out on a CEBAF single cell cavity. The cavity has two beam pipe side-ports for each mode for input and pick-up couplers. Coupling to the TE011 mode is done by magnetic loop couplers while for the TM010 mode coaxial antennas are used. The TE011 mode has the property of having zero surface electric field, surface magnetic field orthogonal to the one in the TM010 mode and concentrated in the iris/wall regions of the cavity. The presence of both modes in the cavity at the same time can also be used to investigate the so-called high field Q-drop in the TM010 mode. This paper will present some preliminary result on the test of the single cell cavity at 2K. |
||
| TPPT072 | Effects of Electric and Magnetic Fields on the Performance of a Superconducting Cavity | 3874 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. A special two-cell cavity was designed to obtain surface field distributions suitable for investigation of electric and magnetic field effects on cavity performance. The cavity design and preliminary results were presented in a previous contribution. The bulk niobium cavity was heat-treated in a vacuum furnace at 1250C to improve the thermal conductivity. Three seamless hydroformed NbCu cavities of the same design were fabricated to investigate the role of the electron beam welds located in high field areas. |
||
| TPPT075 | Influence of Ta Content in High Purity Niobium on Cavity Performance | 3955 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. In a previous paper* we have reported about initial tests of single cell 1500 MHz cavities made from high purity niobium with three different Ta contents of 160 ppm, ~600 ppm and ~1400 ppm. These cavities had been treated by buffered chemical polishing several times and 100 mm, 200 mm and 300 mm of material had been removed from the surfaces. This contribution reports about subsequent tests following post purification heat treatments with Ti and “in situ” baking. As a result, all cavities exhibited increased quench fields due to the improved thermal conductivity after the heat treatment. After the "in situ" baking at 120C for ~40 hrs the always present Q-drop at high fields disappeared and further improvements in accelerating gradient could be realized. Gradients as high as Eacc = 35 MV/m were achieved and there were no clear indications that the cavity performance was influenced by the Ta content in the material. A multi-cell cavity from the high Ta content material is being fabricated and results will be presented at this conference. *P. Kneisel et al., Linac 2004. |
||
| TPPT076 | Preliminary Results from Single Crystal and Very Large Crystal Niobium Cavities | 3991 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. We have fabricated and tested several single cell cavities using material from very large grain niobium ingots. In one case the central grain exceeded 7" in diameter and this was used for a 2 GHz cavity. This activity had a dual purpose: to investigate the influence of grain boundaries on the often observed Q-drop at gradients Eacc > 20 MV/m in the absence of field emission, and to study the possibility of using ingot material for cavity fabrication without going through the expensive process of sheet fabrication. The sheets for these cavities were cut from the ingot by wire electro-discharge machining (EDM) and subsequently formed into half–cells by deep drawing. The following fabrication steps were standard: machining of weld recesses, electron beam welding of beam pipes onto the half cells and final equator weld to join both half cell/beam pipe subunits.The cavities showed heavy Q–disease caused by the EDM; after hydrogen degassing at 800C for 3 hrs in UHV the cavities showed promising results, however, a Q-drop above Eacc ~ 20 MV/m was still present. Testing of the cavities is still ongoing – so far accelerating gradients of 30 MV/m have been achieved. |
||
| TPPT077 | Testing of HOM Coupler Designs on a Single Cell Niobium Cavity | 4012 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. Coaxial higher order mode (HOM) couplers were developed initially for PETRA cavitiesand subsequently for TESLA cavities. They were adopted later for SNS and Jlab upgrade cavities. The principle of operation is the rejection of the fundamental mode by the tunable filter configuration of the coupler and the transmission of the HOMs. It has been recognized recently that, in high average power applications, the pick-up probe of the HOM coupler must be superconducting in order to avoid substantial heat dissipation by the fundamental mode fields and deterioration of the cavity Q. In addition, the thermal conduction of existing rf feedthrough designs is only marginally sufficient to keep even the niobium probe tip superconducting in cw operation. We have equipped a single-cell niobium cavity with different HOM coupler configurations and tested the different designs by measuring Q vs Eacc behavior at 2 K for different feedthroughs and probe tipmaterials |
||
| WPAP038 | Photoemission Studies on BNL/AES/JLab all Niobium, Superconducting RF Injector | 2556 |
|
||
|
Funding: Under contract with the U.S. DOE, Contract No. DE-AC02-98CH10886. Photoemission from all niobium superconducting injector is of considerable interest for the development of higher average current electron sources. In the past year, we have generated photocurrent from such an injector by irradiating the back wall of the 1/2 cell cavity with 248 nm and 266 nm laser beams. In this paper, we present the results of these measurements including the quantum efficiency, and its dependence on the field and wavelength. Issues related to the quenching of the cavity by the laser radiation will also be addressed. |
||
| WPAP039 | Progress on Lead Photocathodes for Superconducting Injectors | 2598 |
|
||
|
Funding: This work was supported by DOE contracts DE-AC02-98CH10886, DE-AC03-76SF00515 and DE-FG02-97ER82336. We present the results of our investigation of bulk, electroplated and vacuum deposited lead as suitable photocathode materials for superconducting RF injectors. The quantum efficiency of each sample is presented as a function of the wavelength of the incident light, from 310 nm to 190 nm. Quantum efficiencies of 0.3% have been obtained. Production of a niobium cavity with a lead-plated cathode is underway. |
||
| WPAP047 | Preliminary Results from a Superconducting Photocathode Sample Cavity | 2956 |
|
||
|
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. Pure niobium has been proposed as a photocathode material and recently a successful test has been conducted with a niobium single cell cavity to extract photo-currents from the surface of this cavity. However, the quantum efficiency of niobium is ~2·10-4, whereas electrodeposited lead has a ~15 times higher quantum efficiency. We have designed and tested a photo-injector niobium cavity, which can be used to insert photo-cathodes made of different materials in the high electric field region of the cavity. Experiments have been conducted with niobium and lead, which show that neither the Q- values of the cavity nor the obtainable surface fields are significantly lowered. This paper reports about the results from these tests. |
||
| TPAP043 | Electron Cooling of RHIC | 2741 |
|
||
|
We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/.
Under contract with the U.S. Department of Energy, Contract Number DE-AC02-98CH10886. |
||
| WPAP033 | State-of-the-Art Electron Guns and Injector Designs for Energy Recovery Linacs (ERL) | 2292 |
|
||
|
Funding: This work is supported by NAVSEA, NSWC Crane, the Office of Naval Research, the DOD Joint Technology Office and by the U.S. DOE. A key technology issue of ERL devices for high-power free-electron laser (FEL) and 4th generation light sources is the demonstration of reliable, high-brightness, high-power injector operation. Ongoing programs that target up to 1 Ampere injector performance at emittance values consistent with the requirements of these applications are described. We consider that there are three possible approaches that could deliver the required performance. The first is a DC photocathode gun and superconducting RF (SRF) booster cryomodule. Such a 750 MHz device is being integrated and will be tested up to 100 mA at the Thomas Jefferson National Accelerator Facility beginning in 2007. The second approach is a high-current normal-conducting RF photoinjector. A 700 MHz gun will undergo thermal test in 2006 at the Los Alamos National Laboratory, which, if successful, when equipped with a suitable cathode, would be capable of 1 Ampere operation. The last option is an SRF gun. A half-cell 703 MHz SRF gun capable of delivering 1.0 Ampere will be tested to 0.5 Ampere at the Brookhaven National Laboratory in 2006. The fabrication status, schedule and projected performance for each of these state-of-the-art injector programs will be presented. |
||
| RPPE061 | SRF Accelerator Technology Transfer Experience from the Achievement of the SNS Cryomodule Production Run | 3517 |
|
||
| This paper will discuss the technology transfer aspect of superconducting RF expertise, as it pertains to cryomodule production, beginning with the original design requirements through testing and concluding with product delivery to the end user. The success of future industrialization, of accelerator systems, is dependent upon a focused effort on accelerator technology transfer. Over the past twenty years the Thomas Jefferson National Accelerator Facility (Jefferson Lab) has worked with industry to successfully design, manufacture, test and commission more superconducting RF cryomodules than any other entity in the United States. The most recent accomplishment of Jefferson Lab has been the successful production of twenty-four cryomodules designed for the Spallation Neutron Source (SNS). Jefferson Lab was chosen, by the United States Department of Energy, to provide the superconducting portion of the SNS linac due to its reputation as a primary resource for SRF expertise. The successful partnering with, and development of, industrial resources to support the fabrication of the superconducting RF cryomodules for SNS by Jefferson Lab will be the focus of this paper. | ||
| RPPE009 | Extremely High Current, High-Brightness Energy Recovery Linac | 1150 |
|
||
|
Funding: Under contract with the U.S. Department of Energy, U.S. DOD Office of Naval Research and Joint Technology Office. Next generation ERL light-sources, high-energy electron coolers, high-power Free-Electron Lasers, powerful Compton X-ray sources and many other accelerators were made possible by the emerging technology of high-power, high-brightness electron beams. In order to get the anticipated performance level of ampere-class currents, many technological barriers are yet to be broken. BNL’s Collider-Accelerator Department is pursuing some of these technologies for its electron cooling of RHIC application, as well as a possible future electron-hadron collider. We will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun and an accelerator cavity capable of producing low emittance (about 1 micron rms normalized) one nano-Coulomb bunches at currents of the order of one ampere average. |