IPAC2015 - List of Authors (Wu, C.Y.)

Paper	Title	Page
MOPTY064	Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies	1088
	P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY069	Control Interface and Functionality of TPS Booster Power Supply	1094
	C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070	Online RadFET Reader for Beam Loss Monitoring System	1097
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072	Beam Loss Study of TLS Using RadFETs	1103
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY074	Preliminary Beam Test of Synchrotron Radiation Monitoring System at Taiwan Photon Source	1109
	C.Y. Liao, Y.-S. Cheng, J. -Y. Chuang, K.T. Hsu, S.Y. Hsu, H.P. Hsueh, K.H. Hu, C.K. Kuan, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source (TPS) is a third generation 3 GeV synchrotron light facility. The synchrotron radiation from a dipole can be used to observe the beam parameters. The synchrotron radiation monitor (SRM) systems were designed and implemented for the booster synchrotron and storage ring. The SRM for the booster synchrotron can serve to diagnose the energy ramping process. The beam size decreases when the energy increases was observed. In the storage ring, the streak camera was preferred to observe the beam behaviour of the consecutive bunches. The bunch length and longitudinal instability were observed. The preliminary beam test results are summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077	Control Interface of Pulse Magnet Power Supply for TPS Project	1120
	C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin NSRRC, Hsinchu, Taiwan
	The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA040	Status of AC Power Supplies for TPS Booster Ring	3203
	Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, B.S. Wang, Y.S. Wong, C.Y. Wu NSRRC, Hsinchu, Taiwan
	TPS is a third generation 3 GeV synchrotron light source under commission in Taiwan. The TPS Booster ring is concentric ring design sharing the same tunnel with storage ring. The booster ring power supplies are responsible of accelerating the 150 MeV Linac output energy to 3 GeV before the beam is preserved in the storage ring. The booster ring power supplies are required to operate at 3Hz sinusoidal waveform with 1000 A peak current for the dipole magnet. All power supplies' specifications and output performance are demonstrated here in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA041	ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY	3206
	B.S. Wang, Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, Y.S. Wong, C.Y. Wu NSRRC, Hsinchu, Taiwan
	In TPS (Taiwan Photon Source) project, 58 home-built small form factor bipolar power supplies are used to fine-tune the trim coil of booster ring bending dipole magnets. With the preliminary analog PI control loop design version, current output will tend to behave with poor linearity around zero current. By employing DSP chip, a full digital PI control loop design together with optimal MOSFT switching algorithm and 13bits PWM output capability is capable of improving the output current performance around zero current. Before the final realization, MATLAB SIMULINK is utilized to find out the optimal MOSFT switching algorithm, and then physical circuit is implemented and tested. The result and design will be demonstrated in this paper to show significant improvement around zero current.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA041
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies

1088

P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY069

Control Interface and Functionality of TPS Booster Power Supply

1094

C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070

Online RadFET Reader for Beam Loss Monitoring System

1097

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072

Beam Loss Study of TLS Using RadFETs

1103

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY074

Preliminary Beam Test of Synchrotron Radiation Monitoring System at Taiwan Photon Source

1109

C.Y. Liao, Y.-S. Cheng, J. -Y. Chuang, K.T. Hsu, S.Y. Hsu, H.P. Hsueh, K.H. Hu, C.K. Kuan, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source (TPS) is a third generation 3 GeV synchrotron light facility. The synchrotron radiation from a dipole can be used to observe the beam parameters. The synchrotron radiation monitor (SRM) systems were designed and implemented for the booster synchrotron and storage ring. The SRM for the booster synchrotron can serve to diagnose the energy ramping process. The beam size decreases when the energy increases was observed. In the storage ring, the streak camera was preferred to observe the beam behaviour of the consecutive bunches. The bunch length and longitudinal instability were observed. The preliminary beam test results are summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077

Control Interface of Pulse Magnet Power Supply for TPS Project

1120

C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin
NSRRC, Hsinchu, Taiwan

The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA040

Status of AC Power Supplies for TPS Booster Ring

3203

Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, B.S. Wang, Y.S. Wong, C.Y. Wu
NSRRC, Hsinchu, Taiwan

TPS is a third generation 3 GeV synchrotron light source under commission in Taiwan. The TPS Booster ring is concentric ring design sharing the same tunnel with storage ring. The booster ring power supplies are responsible of accelerating the 150 MeV Linac output energy to 3 GeV before the beam is preserved in the storage ring. The booster ring power supplies are required to operate at 3Hz sinusoidal waveform with 1000 A peak current for the dipole magnet. All power supplies' specifications and output performance are demonstrated here in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA041

ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY

3206

B.S. Wang, Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, Y.S. Wong, C.Y. Wu
NSRRC, Hsinchu, Taiwan

In TPS (Taiwan Photon Source) project, 58 home-built small form factor bipolar power supplies are used to fine-tune the trim coil of booster ring bending dipole magnets. With the preliminary analog PI control loop design version, current output will tend to behave with poor linearity around zero current. By employing DSP chip, a full digital PI control loop design together with optimal MOSFT switching algorithm and 13bits PWM output capability is capable of improving the output current performance around zero current. Before the final realization, MATLAB SIMULINK is utilized to find out the optimal MOSFT switching algorithm, and then physical circuit is implemented and tested. The result and design will be demonstrated in this paper to show significant improvement around zero current.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA041

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)