SRF2019 - List of Keywords (shielding)

Paper	Title	Other Keywords	Page
MOP026	A Cross-Lab Qualification of Modified 120°C Baked Cavities	cavity, multipactoring, factory, niobium	90
	M. Wenskat, D. Reschke, J. Schaffran, L. Steder, M. Wiencek DESY, Hamburg, Germany D. Bafia, A. Grassellino, O.S. Melnychuk Fermilab, Batavia, Illinois, USA A.D. Palczewski JLab, Newport News, Virginia, USA M. Wiencek IFJ-PAN, Kraków, Poland
	Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1. Within a global effort to understand and standardize the nitrogen-infusion and the low T bake procedure, one large grain and two fine grain single-cell cavity were treated and tested at FNAL and then send to other labs including DESY and JLab for further studies.
	Poster MOP026 [0.813 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP026
About •	paper received ※ 20 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP105	A Superconducting Magnetic Shield for the Photoelectron Injector of BERLinPro	solenoid, cavity, gun, operation	335
	J. Völker, A. Frahm, A. Jankowiak, S. Keckert, J. Knobloch, G. Kourkafas, O. Kugeler, A. Neumann, H. Plötz HZB, Berlin, Germany
	Magnetic fields are a big issue for SRF cavities, especially in areas with strong electromagnets or ferromagnetic materials. Magnetic shieldings consisting of metal alloys with high magnetic permeability are often used to reroute the external magnetic flux from the cavity region. Those Mu metal shields are typically designed for weak magnetic fields like Earth’s magnetic field. Next to strong magnetic field sources like superconducting (SC) solenoids, those shields can be easily saturated resulting in a degradation of the shielding efficiency and a permanent magnetization. For the photoinjector of BERLinPro a new SC solenoid will be installed inside the cryomodule next to the SRF gun cavity. Calculations show that the fringe fields of the solenoid during operation can saturate the cavity Mu-metal shields. Therefore we designed an SC magnetic shield placed between solenoid and cavity shield to protect the latter during magnet operation. In this paper we will present the design and first measurements of this SC magnetic shield.
	Poster MOP105 [2.011 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP105
About •	paper received ※ 04 July 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUFUB5	Effects of Static Magnetic Fields on a Low-frequency TEM Class Superconducting Cavity	cavity, niobium, SRF, superconductivity	370
	M.K. Ng, Z.A. Conway, M.P. Kelly, K.W. Shepard ANL, Lemont, Illinois, USA
	Systematic studies on the effect of magnetic fields on a 330 MHz superconducting (TEM-mode) half-wave cavity are presented. The practical application of the results is for a possible future 2 K operation in the ATLAS heavy-ion accelerator at Argonne. The low frequency and the integral stainless steel jacket, rather than titanium, provide important new data for this full production model low-beta cavity. The studies include multi-axial magnetic field measurements near the cavity surface due to ambient and applied fields. Cavity performance under different conditions is measured at temperatures ranging between 1.6 K and 4.5 K. A residual resistance of approximately 5-7 nΩ at 1.6 K is observed. Data suggest that an appreciable fraction arises from losses that are not due to flux trapping.
	Slides TUFUB5 [1.195 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUFUB5
About •	paper received ※ 24 June 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP016	Quarter-wave Resonator with the Optimized Shape for Quantum Information Systems	cavity, niobium, photon, factory	430
	S.V. Kutsaev, R.B. Agustsson, P.R. Carriere, A. Moro, A.Yu. Smirnov, K.V. Taletski RadiaBeam, Santa Monica, California, USA A.N. Cleland, É. Dumur The University of Chicago, Chicago, Illinois, USA Z.A. Conway ANL, Lemont, Illinois, USA K.V. Taletski MEPhI, Moscow, Russia
	Funding: This work was supported by the U.S. Department of Energy, Office of High Energy Physics, under SBIR grant DE-SC0018753 Quantum computers (QC), if realized, could disrupt many computationally intense fields of science. The building block element of a QC is a quantum bit (qubit). Qubits enable the use of quantum superposition and multi-state entanglement in QC calculations, allowing a QC to simultaneously calculate millions of computations at once. However, quantum states stored in a qubit degrade with decreased quality factors and interactions with the environment. One technical solution to improve qubit lifetimes and network interactions is a circuit comprised of a Josephson junction located inside of a high Q-factor superconducting 3D cavity. RadiaBeam, in collaboration with Argonne National Laboratory and The University of Chicago, has developed a superconducting radio-frequency quarter-wave resonant cavity (QWR) for quantum computation. Here a 6 GHz QWR was optimized to include tapering of the inner and outer conductors, a toroidal shape for the resonator shorting plane, and the inner conductor to reduce parasitic capacitance. In this paper, we present the results of the qubit cavity design optimization, fabrication, processing and testing in a single-photon regime at mK temperatures.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP016
About •	paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP078	Lower Critical Field Measurement of NbN Multilayer Thin Film Superconductor at KEK	solenoid, cavity, SRF, radio-frequency	632
	H. Ito Sokendai, Ibaraki, Japan C.Z. Antoine CEA-IRFU, Gif-sur-Yvette, France H. Hayano, R. Katayama, T. Kubo, T. Saeki KEK, Ibaraki, Japan R. Ito, T. Nagata ULVAC, Inc, Chiba, Japan Y. Iwashita, H. Tongu Kyoto ICR, Uji, Kyoto, Japan
	Funding: The work is supported by Japan Society for the Promotion of Science Grant-in-Aid for Young Scientist (A) No.17H04839. The multilayer thin film structure of the superconductor has been proposed by A. Gurevich to enhance the maximum gradient of SRF cavities. The lower critical field Hc1 at which the vortex start penetrating the superconducting material will be improved by coating Nb with thin film superconductor such as NbN. It is expected that the enhancement of Hc1 depends on the thickness of each layer. In order to determine the optimum thickness of each layer and to compare the measurement results with the theoretical prediction proposed by T. Kubo, we developed the Hc1 measurement system using the third harmonic response of the applied AC magnetic field at KEK. For the Hc1 measurement without the influence of the edge or the shape effects, the AC magnetic field can be applied locally by the solenoid coil of 5mm diameter in our measurement system. ULVAC made the NbN-SiO₂ multilayer thin film samples of various NbN thicknesses. In this report, the measurement result of the bulk Nb sample and NbN-SiO₂ multilayer thin film samples of different thickness of NbN layer will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP078
About •	paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOP026

A Cross-Lab Qualification of Modified 120°C Baked Cavities

cavity, multipactoring, factory, niobium

90

M. Wenskat, D. Reschke, J. Schaffran, L. Steder, M. Wiencek
DESY, Hamburg, Germany
D. Bafia, A. Grassellino, O.S. Melnychuk
Fermilab, Batavia, Illinois, USA
A.D. Palczewski
JLab, Newport News, Virginia, USA
M. Wiencek
IFJ-PAN, Kraków, Poland

Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1.
Within a global effort to understand and standardize the nitrogen-infusion and the low T bake procedure, one large grain and two fine grain single-cell cavity were treated and tested at FNAL and then send to other labs including DESY and JLab for further studies.

Poster MOP026 [0.813 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP026

About •

paper received ※ 20 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP105

A Superconducting Magnetic Shield for the Photoelectron Injector of BERLinPro

solenoid, cavity, gun, operation

335

J. Völker, A. Frahm, A. Jankowiak, S. Keckert, J. Knobloch, G. Kourkafas, O. Kugeler, A. Neumann, H. Plötz
HZB, Berlin, Germany

Magnetic fields are a big issue for SRF cavities, especially in areas with strong electromagnets or ferromagnetic materials. Magnetic shieldings consisting of metal alloys with high magnetic permeability are often used to reroute the external magnetic flux from the cavity region. Those Mu metal shields are typically designed for weak magnetic fields like Earth’s magnetic field. Next to strong magnetic field sources like superconducting (SC) solenoids, those shields can be easily saturated resulting in a degradation of the shielding efficiency and a permanent magnetization. For the photoinjector of BERLinPro a new SC solenoid will be installed inside the cryomodule next to the SRF gun cavity. Calculations show that the fringe fields of the solenoid during operation can saturate the cavity Mu-metal shields. Therefore we designed an SC magnetic shield placed between solenoid and cavity shield to protect the latter during magnet operation. In this paper we will present the design and first measurements of this SC magnetic shield.

Poster MOP105 [2.011 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP105

About •

paper received ※ 04 July 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUFUB5

Effects of Static Magnetic Fields on a Low-frequency TEM Class Superconducting Cavity

cavity, niobium, SRF, superconductivity

370

M.K. Ng, Z.A. Conway, M.P. Kelly, K.W. Shepard
ANL, Lemont, Illinois, USA

Systematic studies on the effect of magnetic fields on a 330 MHz superconducting (TEM-mode) half-wave cavity are presented. The practical application of the results is for a possible future 2 K operation in the ATLAS heavy-ion accelerator at Argonne. The low frequency and the integral stainless steel jacket, rather than titanium, provide important new data for this full production model low-beta cavity. The studies include multi-axial magnetic field measurements near the cavity surface due to ambient and applied fields. Cavity performance under different conditions is measured at temperatures ranging between 1.6 K and 4.5 K. A residual resistance of approximately 5-7 nΩ at 1.6 K is observed. Data suggest that an appreciable fraction arises from losses that are not due to flux trapping.

Slides TUFUB5 [1.195 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUFUB5

About •

paper received ※ 24 June 2019 paper accepted ※ 14 August 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP016

Quarter-wave Resonator with the Optimized Shape for Quantum Information Systems

cavity, niobium, photon, factory

430

S.V. Kutsaev, R.B. Agustsson, P.R. Carriere, A. Moro, A.Yu. Smirnov, K.V. Taletski
RadiaBeam, Santa Monica, California, USA
A.N. Cleland, É. Dumur
The University of Chicago, Chicago, Illinois, USA
Z.A. Conway
ANL, Lemont, Illinois, USA
K.V. Taletski
MEPhI, Moscow, Russia

Funding: This work was supported by the U.S. Department of Energy, Office of High Energy Physics, under SBIR grant DE-SC0018753
Quantum computers (QC), if realized, could disrupt many computationally intense fields of science. The building block element of a QC is a quantum bit (qubit). Qubits enable the use of quantum superposition and multi-state entanglement in QC calculations, allowing a QC to simultaneously calculate millions of computations at once. However, quantum states stored in a qubit degrade with decreased quality factors and interactions with the environment. One technical solution to improve qubit lifetimes and network interactions is a circuit comprised of a Josephson junction located inside of a high Q-factor superconducting 3D cavity. RadiaBeam, in collaboration with Argonne National Laboratory and The University of Chicago, has developed a superconducting radio-frequency quarter-wave resonant cavity (QWR) for quantum computation. Here a 6 GHz QWR was optimized to include tapering of the inner and outer conductors, a toroidal shape for the resonator shorting plane, and the inner conductor to reduce parasitic capacitance. In this paper, we present the results of the qubit cavity design optimization, fabrication, processing and testing in a single-photon regime at mK temperatures.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP016

About •

paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP078

Lower Critical Field Measurement of NbN Multilayer Thin Film Superconductor at KEK

solenoid, cavity, SRF, radio-frequency

632

H. Ito
Sokendai, Ibaraki, Japan
C.Z. Antoine
CEA-IRFU, Gif-sur-Yvette, France
H. Hayano, R. Katayama, T. Kubo, T. Saeki
KEK, Ibaraki, Japan
R. Ito, T. Nagata
ULVAC, Inc, Chiba, Japan
Y. Iwashita, H. Tongu
Kyoto ICR, Uji, Kyoto, Japan

Funding: The work is supported by Japan Society for the Promotion of Science Grant-in-Aid for Young Scientist (A) No.17H04839.
The multilayer thin film structure of the superconductor has been proposed by A. Gurevich to enhance the maximum gradient of SRF cavities. The lower critical field Hc1 at which the vortex start penetrating the superconducting material will be improved by coating Nb with thin film superconductor such as NbN. It is expected that the enhancement of Hc1 depends on the thickness of each layer. In order to determine the optimum thickness of each layer and to compare the measurement results with the theoretical prediction proposed by T. Kubo, we developed the Hc1 measurement system using the third harmonic response of the applied AC magnetic field at KEK. For the Hc1 measurement without the influence of the edge or the shape effects, the AC magnetic field can be applied locally by the solenoid coil of 5mm diameter in our measurement system. ULVAC made the NbN-SiO₂ multilayer thin film samples of various NbN thicknesses. In this report, the measurement result of the bulk Nb sample and NbN-SiO₂ multilayer thin film samples of different thickness of NbN layer will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP078

About •

paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)