SRF2019 - List of Keywords (neutron)

Paper	Title	Other Keywords	Page
MOP047	Progress of IFMIF/EVEDA Project and Prospects for A-FNS	rfq, radiation, SRF, cavity	159
	S. Ishida, A. Kasugai, K. Sakamoto QST, Aomori, Japan P. Cara IFMIF/EVEDA, Rokkasho, Japan H. Dzitko F4E, Germany
	International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source, in which two 40 MeV Deuteron(D) beams with a total current 250 mA impact on a liquid Li stream flowing at 15 m/s. In the IFMIF/EVEDA project under the Broader Approach (BA) agreement, the Li target was continuously operated with the cold trap and satisfied the stability requirement throughout the continuous operation. The Linear IFMIF Prototype Accelerator (LIPAc) is currently under development in Rokkasho, Japan, to demonstrate the 9 MeV/125 mA D⁺ beam acceleration. Recently, the first proton beam was injected into the RFQ with more than 90 % of transmission, followed by the first D⁺ beam accelerated at 5 MeV. The SRF linac necessary for the 9-MeV D⁺ beam is nearing completion of the manufacturing phase and will be assembled in Rokkasho. Based on these results, a conceptual design of the Advanced Fusion Neutron Source (A-FNS) for its construction in Rokkasho is underway to obtain material irradiation data for a DEMO reactor. The A-FNS is designed to be composed of an accelerator facility with a 40 MeV/125 mA D⁺ beam, a test facility including a liquid Li target system and a post irradiation examination facility, and to enable multipurpose utilization for neutron application.
	Poster MOP047 [2.327 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP047
About •	paper received ※ 29 June 2019 paper accepted ※ 12 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP097	Preliminary Design of the IFMIF-DONES Superconducting Linac	cavity, cryomodule, linac, SRF	311
	T. Plomion, N. Bazin, N. Chauvin, G. Devanz, J. Plouin, K. Romieu CEA-DRF-IRFU, France S. Chel CEA-IRFU, Gif-sur-Yvette, France
	The linear accelerator for the DONES facility (DEMO oriented neutron source) will serve as a neutron source for the assessment of materials damage in future fusion reactors. The DONES accelerator, which is based on the design of LIPac (Linear IFMIF Prototype Accelerator, which is under construction in Rokkasho, Japan) will accelerate deuterons from 100 keV up to 40 MeV at full CW current of 125 mA. This paper will present the preliminary design of the superconducting linac which is based on five cryomodules.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP097
About •	paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOP047

Progress of IFMIF/EVEDA Project and Prospects for A-FNS

rfq, radiation, SRF, cavity

159

S. Ishida, A. Kasugai, K. Sakamoto
QST, Aomori, Japan
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
H. Dzitko
F4E, Germany

International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source, in which two 40 MeV Deuteron(D) beams with a total current 250 mA impact on a liquid Li stream flowing at 15 m/s. In the IFMIF/EVEDA project under the Broader Approach (BA) agreement, the Li target was continuously operated with the cold trap and satisfied the stability requirement throughout the continuous operation. The Linear IFMIF Prototype Accelerator (LIPAc) is currently under development in Rokkasho, Japan, to demonstrate the 9 MeV/125 mA D⁺ beam acceleration. Recently, the first proton beam was injected into the RFQ with more than 90 % of transmission, followed by the first D⁺ beam accelerated at 5 MeV. The SRF linac necessary for the 9-MeV D⁺ beam is nearing completion of the manufacturing phase and will be assembled in Rokkasho. Based on these results, a conceptual design of the Advanced Fusion Neutron Source (A-FNS) for its construction in Rokkasho is underway to obtain material irradiation data for a DEMO reactor. The A-FNS is designed to be composed of an accelerator facility with a 40 MeV/125 mA D⁺ beam, a test facility including a liquid Li target system and a post irradiation examination facility, and to enable multipurpose utilization for neutron application.

Poster MOP047 [2.327 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP047

About •

paper received ※ 29 June 2019 paper accepted ※ 12 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP097

Preliminary Design of the IFMIF-DONES Superconducting Linac

cavity, cryomodule, linac, SRF

311

T. Plomion, N. Bazin, N. Chauvin, G. Devanz, J. Plouin, K. Romieu
CEA-DRF-IRFU, France
S. Chel
CEA-IRFU, Gif-sur-Yvette, France

The linear accelerator for the DONES facility (DEMO oriented neutron source) will serve as a neutron source for the assessment of materials damage in future fusion reactors. The DONES accelerator, which is based on the design of LIPac (Linear IFMIF Prototype Accelerator, which is under construction in Rokkasho, Japan) will accelerate deuterons from 100 keV up to 40 MeV at full CW current of 125 mA. This paper will present the preliminary design of the superconducting linac which is based on five cryomodules.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP097

About •

paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)