SRF2019 - List of Authors (Zhang, P.)

Paper	Title	Page
TUP010	Mechanical Design and Horizontal Tests of a Dressed 166.6 MHz Quarter-wave β=1 SRF Cavity System	408
	X.Y. Zhang, X.R. Hao, D.B. Li, Z.Q. Li, H.Y. Lin, Q. Ma, Z.H. Mi, Q.Y. Wang, P. Zhang IHEP, Beijing, People’s Republic of China
	Funding: This work has been supported by HEPS-TF project. A 166.6 MHz quarter-wave β=1 superconducting proof-of-principle cavity has been designed and recently been dressed with a helium jacket, fundamental power coupler and tuner. The cavity was subsequently installed in a modified cryomodule and tested in a horizontal manner at both 4.2 K and 2 K. The helium jacket was successfully developed with a focus on minimizing frequency shift due to helium pressure fluctuation while retaining a reasonable tuning range. The Lorentz force detuning (LFD) and microphonics were also optimized during the design. The df/dp and LFD coefficient were measured to be -3.1 Hz/mbar and -0.8 Hz/(MV/m)². These are in good agreement with simulations. Future work is mainly to reduce the stiffness of the cavity and further suppress the vibration mode of the inner conductor.
	Poster TUP010 [1.245 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP010
About •	paper received ※ 23 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP068	Study of Surface Treatment of 1.3 GHz Single-cell Copper Cavity for Niobium Sputtering	605
SUSP018	use link to see paper's listing under its alternate paper code
	F.Y. Yang, J. Dai, P. He, Z.Q. Li, Y. Ma, P. Zhang IHEP, Beijing, People’s Republic of China
	Funding: This work has been supported in part by PAPS project and National Key Programme for S&T Research and Development (Grant NO.: 2016YFA0400400) A R&D program on niobium sputtering on copper cavities has started at IHEP in 2017. Single-cell 1.3 GHz copper cavity has been chosen as a substrate. A chemical polishing system has subsequently developed and commissioned recently to accommodate the etching of both copper samples and a cavity. Different polishing agents have been tested on copper samples and later characterized. The results of these surface treatment tests are presented.
	Poster TUP068 [1.228 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP068
About •	paper received ※ 20 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP072	The Development of Niobium Sputtering on Copper Cavities at IHEP	613
	J. Dai, P. He, Z.Q. Li, Y. Ma, F.Y. Yang, P. Zhang IHEP, Beijing, People’s Republic of China
	A R&D program focusing on niobium sputtering on copper cavities started at IHEP in 2017. Single-cell 1.3 GHz elliptical cavity shape has been initially chosen as sputtering substrate. A magnetron sputtering system have been developed in 2018. In addition, a surface treatment facility to polish the copper substrate before sputtering has been developed and commissioned. This paper will present the Nb/Cu coating activities at IHEP.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP072
About •	paper received ※ 19 June 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP080	Tuner Design and Test for 166.6 MHz SRF Cavity of HEPS	642
	Z.H. Mi, Z.Q. Li, H.Y. Lin, W.M. Pan, Q.Y. Wang, P. Zhang, X.Y. Zhang, H.J. Zheng IHEP, Beijing, People’s Republic of China
	The 166.6 MHz superconducting RF cavities have been proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. The cavity is of quarter-wave type made of bulk niobium with ¿=1. Each cavity will be operated at 4.2 K providing 1.2 MV accelerating. To compensate the frequency change due to manufacturing uncertainty, Lorentz force, beam loading, He pressure and microphonics the plunger tuner and gap tuner are chosen as options. Now the plunger tuner and low temperature gap tuner have been test with cavity, while the warm gap tuner is being designed. Details of the design and summary of the test results of the two type tuners with cavity are presented in this paper.
	Poster TUP080 [1.141 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP080
About •	paper received ※ 22 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP075	Development of a 166.6 MHz Digital LLRF System for HEPS-TF Project	1073
	Q.Y. Wang, J.P. Dai, T.M. Huang, D.B. Li, H.Y. Lin, Z.H. Mi, P. Zhang IHEP, Beijing, People’s Republic of China
	A 166.6 MHz superconducting RF system has been proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. A 166.6MHz digital low-level RF system for HEPS-TF project has been developed firstly. And the digital low-level RF system has been successfully applied to the horizontal high power test of 166.6MHz superconducting cavity. The cavity field stability has been successfully achieved about ±0.03% (pk-pk) in amplitude and ±0.02 degree (pk-pk) in phase while the cavity field voltage is up to 1.2MV. It can meet the field stability requirements towards ±0.1% in ampli-tude and ±0.1 degree in phase of HEPS project. Further study and optimization of the system is under way.
	Poster THP075 [1.612 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP075
About •	paper received ※ 29 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAA5	SRF Activities and Progress at IHEP
	F.S. He, F. Bing, J. Dai, C. Dong, T.M. Huang, S. Jin, D.B. Li, Z.Q. Li, H.Y. Lin, B.Q. Liu, Z.C. Liu, Q. Ma, F. Meng, Z.H. Mi, W.M. Pan, P. Sha, Q.Y. Wang, L.G. Xiao, F.Y. Yang, J.Y. Zhai, P. Zhang, X.Y. Zhang, H.J. Zheng, Q. Zhou IHEP, Beijing, People’s Republic of China
	There are several active SRF projects at IHEP, including HEPS, CEPC, CSNS upgrade, SHINE and PAPS SRF facility. Four cryomodules with 166.6 MHz β=1 QWR cavities are proposed for HEPS, while each cavity will providing 1.2 MV and 145 kW to the electron beam. The vertical and horizotal tests of the proof-of-principle cavities were recently conducted. 650 MHz 2-cell cavities and 1.3 GHz 9-cell cavities were proposed for the CEPC, and high Q technology is adopted by the project. Infrastructures are developed for the high Q study, while R&D on single-cell cavities are under-way. Efforts on learning mass-production of cavities and cavity-string were also made for both CEPC and SHINE projects. SRF linac from 80 MeV to over 300 MeV were adopted for the upgrade of CSNS, with 325 MHz Double-spoke cavities at β=0.50 and 650 MHz-5cell elliptical cavities at β=0.65. The PAPS SRF facility is biased on mass production for large SRF projects, i.e. aiming at assembly and testing of 200-400 cavities & couplers and 20 cryomodules per year. The equipment installation and commissioning is on going. The activities and progress of these SRF projects with be addressed in this presentation.
	Slides FRCAA5 [13.318 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Mechanical Design and Horizontal Tests of a Dressed 166.6 MHz Quarter-wave β=1 SRF Cavity System

408

X.Y. Zhang, X.R. Hao, D.B. Li, Z.Q. Li, H.Y. Lin, Q. Ma, Z.H. Mi, Q.Y. Wang, P. Zhang
IHEP, Beijing, People’s Republic of China

Funding: This work has been supported by HEPS-TF project.
A 166.6 MHz quarter-wave β=1 superconducting proof-of-principle cavity has been designed and recently been dressed with a helium jacket, fundamental power coupler and tuner. The cavity was subsequently installed in a modified cryomodule and tested in a horizontal manner at both 4.2 K and 2 K. The helium jacket was successfully developed with a focus on minimizing frequency shift due to helium pressure fluctuation while retaining a reasonable tuning range. The Lorentz force detuning (LFD) and microphonics were also optimized during the design. The df/dp and LFD coefficient were measured to be -3.1 Hz/mbar and -0.8 Hz/(MV/m)². These are in good agreement with simulations. Future work is mainly to reduce the stiffness of the cavity and further suppress the vibration mode of the inner conductor.

Poster TUP010 [1.245 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP010

About •

paper received ※ 23 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP068

Study of Surface Treatment of 1.3 GHz Single-cell Copper Cavity for Niobium Sputtering

605

SUSP018

use link to see paper's listing under its alternate paper code

F.Y. Yang, J. Dai, P. He, Z.Q. Li, Y. Ma, P. Zhang
IHEP, Beijing, People’s Republic of China

Funding: This work has been supported in part by PAPS project and National Key Programme for S&T Research and Development (Grant NO.: 2016YFA0400400)
A R&D program on niobium sputtering on copper cavities has started at IHEP in 2017. Single-cell 1.3 GHz copper cavity has been chosen as a substrate. A chemical polishing system has subsequently developed and commissioned recently to accommodate the etching of both copper samples and a cavity. Different polishing agents have been tested on copper samples and later characterized. The results of these surface treatment tests are presented.

Poster TUP068 [1.228 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP068

About •

paper received ※ 20 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP072

The Development of Niobium Sputtering on Copper Cavities at IHEP

613

J. Dai, P. He, Z.Q. Li, Y. Ma, F.Y. Yang, P. Zhang
IHEP, Beijing, People’s Republic of China

A R&D program focusing on niobium sputtering on copper cavities started at IHEP in 2017. Single-cell 1.3 GHz elliptical cavity shape has been initially chosen as sputtering substrate. A magnetron sputtering system have been developed in 2018. In addition, a surface treatment facility to polish the copper substrate before sputtering has been developed and commissioned. This paper will present the Nb/Cu coating activities at IHEP.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP072

About •

paper received ※ 19 June 2019 paper accepted ※ 04 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP080

Tuner Design and Test for 166.6 MHz SRF Cavity of HEPS

642

Z.H. Mi, Z.Q. Li, H.Y. Lin, W.M. Pan, Q.Y. Wang, P. Zhang, X.Y. Zhang, H.J. Zheng
IHEP, Beijing, People’s Republic of China

The 166.6 MHz superconducting RF cavities have been proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. The cavity is of quarter-wave type made of bulk niobium with ¿=1. Each cavity will be operated at 4.2 K providing 1.2 MV accelerating. To compensate the frequency change due to manufacturing uncertainty, Lorentz force, beam loading, He pressure and microphonics the plunger tuner and gap tuner are chosen as options. Now the plunger tuner and low temperature gap tuner have been test with cavity, while the warm gap tuner is being designed. Details of the design and summary of the test results of the two type tuners with cavity are presented in this paper.

Poster TUP080 [1.141 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP080

About •

paper received ※ 22 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP075

Development of a 166.6 MHz Digital LLRF System for HEPS-TF Project

1073

Q.Y. Wang, J.P. Dai, T.M. Huang, D.B. Li, H.Y. Lin, Z.H. Mi, P. Zhang
IHEP, Beijing, People’s Republic of China

A 166.6 MHz superconducting RF system has been proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. A 166.6MHz digital low-level RF system for HEPS-TF project has been developed firstly. And the digital low-level RF system has been successfully applied to the horizontal high power test of 166.6MHz superconducting cavity. The cavity field stability has been successfully achieved about ±0.03% (pk-pk) in amplitude and ±0.02 degree (pk-pk) in phase while the cavity field voltage is up to 1.2MV. It can meet the field stability requirements towards ±0.1% in ampli-tude and ±0.1 degree in phase of HEPS project. Further study and optimization of the system is under way.

Poster THP075 [1.612 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP075

About •

paper received ※ 29 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAA5

SRF Activities and Progress at IHEP

F.S. He, F. Bing, J. Dai, C. Dong, T.M. Huang, S. Jin, D.B. Li, Z.Q. Li, H.Y. Lin, B.Q. Liu, Z.C. Liu, Q. Ma, F. Meng, Z.H. Mi, W.M. Pan, P. Sha, Q.Y. Wang, L.G. Xiao, F.Y. Yang, J.Y. Zhai, P. Zhang, X.Y. Zhang, H.J. Zheng, Q. Zhou
IHEP, Beijing, People’s Republic of China

There are several active SRF projects at IHEP, including HEPS, CEPC, CSNS upgrade, SHINE and PAPS SRF facility. Four cryomodules with 166.6 MHz β=1 QWR cavities are proposed for HEPS, while each cavity will providing 1.2 MV and 145 kW to the electron beam. The vertical and horizotal tests of the proof-of-principle cavities were recently conducted. 650 MHz 2-cell cavities and 1.3 GHz 9-cell cavities were proposed for the CEPC, and high Q technology is adopted by the project. Infrastructures are developed for the high Q study, while R&D on single-cell cavities are under-way. Efforts on learning mass-production of cavities and cavity-string were also made for both CEPC and SHINE projects. SRF linac from 80 MeV to over 300 MeV were adopted for the upgrade of CSNS, with 325 MHz Double-spoke cavities at β=0.50 and 650 MHz-5cell elliptical cavities at β=0.65. The PAPS SRF facility is biased on mass production for large SRF projects, i.e. aiming at assembly and testing of 200-400 cavities & couplers and 20 cryomodules per year. The equipment installation and commissioning is on going. The activities and progress of these SRF projects with be addressed in this presentation.

Slides FRCAA5 [13.318 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)