SRF2017 - List of Authors (Furuta, F.)

Paper	Title	Page
MOPB087	Frequency Tuner Development and Testing at Cornell for the RAON Half-wave-resonator	266
	M. Ge, F. Furuta, J.E. Gillette, T. Gruber, S.W. Hartman, M. Liepe, T.I. O'Connell, P.J. Pamel, P. Quigley, J. Sears, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA B.H. Choi, J. Joo, J.W. Kim, W.K. Kim, J. Lee, I. Shin IBS, Daejeon, Republic of Korea
	The half-wave-resonators (HWRs) for the RAON project require a slow frequency tuner that can provide >80 kHz tuning range. Cornell University is currently in the process of designing, prototyping, and testing this HWR tuner. In this paper, we present the optimized tuner design, prototype fabrication, test insert preparation, and cryogenic test results. The performance of the tuner is analysed in detail.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB087
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB008	Performance of SRF Half-wave-resonators Tested at Cornell for the RAON Project	396
	M. Ge, F. Furuta, J.E. Gillette, T. Gruber, S.W. Hartman, M. Liepe, T.I. O'Connell, P.J. Pamel, J. Sears, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA B.H. Choi, J. Joo, J.W. Kim, W.K. Kim, J. Lee, I. Shin IBS, Daejeon, Republic of Korea
	Two prototype half-wave-resonators (HWR; 162.5MHz and β=0.12) for the RAON project were tested at Cornell University. In this paper, we report and analyse detailed results from vertical tests, including tests of the HWRs without and with helium tank. Surface preparation at Research Instruments is discussed, as well as the development of new HWR preparation and test infrastructure at Cornell.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB073	Vertical Electro-polishing Collaboration Between Cornell, KEK, and Marui Galvanizing Co. Ltd	563
	F. Furuta, M. Ge, T. Gruber, J.J. Kaufman, M. Liepe, J. Sears Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA V. Chouhan, Y.I. Ida, K.N. Nii, T.Y. Yamaguchi MGH, Hyogo-ken, Japan H. Hayano, S. Kato, T. Saeki KEK, Ibaraki, Japan
	Cornell's SRF group, KEK, and Marui Galvanizing Co. Ltd (MGI) have collaborated since 2014 on Vertical Electro-Polishing (VEP) R&D as a part of a US/Japan Program for Cooperation in High Energy Physics. We have focused on an improvement of removal uniformity during the VEP process. MGI and KEK have developed their original VEP cathode named i-cathode Ninja®, which has four retractable wing-shape parts per cell. Cornell processed one single cell cavity with VEP using this cathode and performed a vertical test. KEK also provided one 9-cell cavity to Cornell. Cornell then performed surface treatments including Cornell VEP and RF test on this 9-cell cavity. The progress by the VEP collaboration and RF test results are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB073
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB074	RF Performance of Multi-cell Scale Niobium SRF Cavities Prepared with HF Free Bipolar Electro-polishing at Faraday Technology	567
	F. Furuta, M. Ge, T. Gruber, J.J. Kaufman, M. Liepe, J. Sears Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA T.D. Hall, M.E. Inman, R. Radhakrishnan, S.T. Snyder, E.J. Taylor Faraday Technology, Inc., Clayton, Ohio, USA
	Cornell's SRF group and Faraday Technology, Inc. have been collaborating on two phase-II SBIR projects. One of them is the development and commissioning of a 9-cell scale HF free Bipolar Electro-Polishing (BEP) system. Faraday Technology had completed the proof of principle on BEP with single cell scale prior to the work reported here, and has now developed a new 9-cell scale BEP system. Cornell has fabricated three single cell cavities and has assembled them together as a 9-cell scale test string. The 9-cell scale test string has received BEP at Faraday Technology and RF testing has been performed on the three single cell cavities one-by-one at Cornell. Here we give a status update on the new 9-cell scale BEP system commissioning and on results from RF tests of the BEP cavities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB003	An Innovative Design of a Flexible Temperature-mapping System	746
	M. Ge, F. Furuta, M. Liepe, P.J. Pamel Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	A temperature-mapping (T-Map) system is an essential tool for fundamental SRF research as it provides spatial information of RF power dissipation and so allows localizing hot-spots on a cavity surface at cryogenic temperatures. However, the temperature sensors are mounted on rigid boards in most current systems, so each can only work for one specific cavity size and shape. In this paper, we proposed a flexible design, which allows this temperature mapping system to work for different cavity shapes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB004	Impact of the Duration of Low Temperature Doping on Superconducting Cavity Performance	750
	P.N. Koufalis, F. Furuta, J.J. Kaufman, M. Liepe Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Low temperature treatments of superconducting cavities in a low pressure ambient atmosphere have been shown to introduce a 'Q-rise' up to moderate surface fields and an overall increase in quality factor. However, the effect of varying the doping time at a fixed temperature on cavity performance has not been systematically examined. We present results of such an investigation for cavities prepared at 120 and 160 C in a continuously flowing low pressure atmosphere for various amounts of time. We show that the introduction of impurities to the RF penetration layer can improve cavity performance and investigate the relationship between electron mean free path and the temperature-dependent component of the surface resistance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB043	Effects of Chemical Treatments on the Surface Roughess and Surface Magnetic Field Ehancement of Niobium-3 Tin Films for Superconducting Radio-Frequency Cavities	848
	R.D. Porter, F. Furuta, D.L. Hall, M. Liepe, J.T. Maniscalco Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Current niobium-3 tin (Nb3Sn) films produced via vapor diffusion have rougher surfaces than typical electropolished niobium surfaces causing significantly enhancement of the surface magnetic fields. Reducing surface roughness of Nb3Sn surfaces may be necessary to achieve higher gradient accelerator cavities with high Q. Previous work at Cornell has shown the impact of several chemical treatments on the surface roughness of Nb3Sn films; however, it had not been evaluated how the changes in surface roughness impact the surface magnetic field enhancement. In this paper we present simulations of the surface field enhancement of oxipolished Nb3Sn, which was shown to be effective at reducing the surface roughness of Nb3Sn. The surface magnetic field enhancement data is compared to those of unetched Nb3Sn to find that the surface magnetic field enhancement (and surface roughness) has been roughly halved.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB043
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXAA02	High-efficiency, High-current Optimized Main-linac ERL Cryomodule	935
	F. Furuta, N. Banerjee, A.C. Bartnik, J. Dobbins, R.G. Eichhorn, M. Ge, G.H. Hoffstaetter, M. Liepe, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	The Main Linac Cryomodule (MLC) prototype is a key component of the Cornell-BNL ERL Test Accelerator (CBETA) project, which is a 4-turn FFAG ERL currently under construction at Cornell University. This novel cryomodule is the first SRF module ever to be fully optimized simultaneously for high efficient SRF cavity operation and for supporting very high CW beam currents. After a successful initial MLC testing, the MLC has now been moved into its final location for the CBETA ring. For a first beam test of the MLC and CBETA, the Cornell ERL high voltage DC gun and SRF injector cryomodule were connected to MLC via an entry beam line; a beam stop assembly was also installed at the exit line. In this paper, we summarize the performance of this novel ERL cryomodule including the results of the first beam test and the additional tests focused on RF field stability and cavity microphonics.
	Slides FRXAA02 [8.792 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-FRXAA02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Frequency Tuner Development and Testing at Cornell for the RAON Half-wave-resonator

266

M. Ge, F. Furuta, J.E. Gillette, T. Gruber, S.W. Hartman, M. Liepe, T.I. O'Connell, P.J. Pamel, P. Quigley, J. Sears, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
B.H. Choi, J. Joo, J.W. Kim, W.K. Kim, J. Lee, I. Shin
IBS, Daejeon, Republic of Korea

The half-wave-resonators (HWRs) for the RAON project require a slow frequency tuner that can provide >80 kHz tuning range. Cornell University is currently in the process of designing, prototyping, and testing this HWR tuner. In this paper, we present the optimized tuner design, prototype fabrication, test insert preparation, and cryogenic test results. The performance of the tuner is analysed in detail.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-MOPB087

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB008

Performance of SRF Half-wave-resonators Tested at Cornell for the RAON Project

396

M. Ge, F. Furuta, J.E. Gillette, T. Gruber, S.W. Hartman, M. Liepe, T.I. O'Connell, P.J. Pamel, J. Sears, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
B.H. Choi, J. Joo, J.W. Kim, W.K. Kim, J. Lee, I. Shin
IBS, Daejeon, Republic of Korea

Two prototype half-wave-resonators (HWR; 162.5MHz and β=0.12) for the RAON project were tested at Cornell University. In this paper, we report and analyse detailed results from vertical tests, including tests of the HWRs without and with helium tank. Surface preparation at Research Instruments is discussed, as well as the development of new HWR preparation and test infrastructure at Cornell.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB073

Vertical Electro-polishing Collaboration Between Cornell, KEK, and Marui Galvanizing Co. Ltd

563

F. Furuta, M. Ge, T. Gruber, J.J. Kaufman, M. Liepe, J. Sears
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
V. Chouhan, Y.I. Ida, K.N. Nii, T.Y. Yamaguchi
MGH, Hyogo-ken, Japan
H. Hayano, S. Kato, T. Saeki
KEK, Ibaraki, Japan

Cornell's SRF group, KEK, and Marui Galvanizing Co. Ltd (MGI) have collaborated since 2014 on Vertical Electro-Polishing (VEP) R&D as a part of a US/Japan Program for Cooperation in High Energy Physics. We have focused on an improvement of removal uniformity during the VEP process. MGI and KEK have developed their original VEP cathode named i-cathode Ninja®, which has four retractable wing-shape parts per cell. Cornell processed one single cell cavity with VEP using this cathode and performed a vertical test. KEK also provided one 9-cell cavity to Cornell. Cornell then performed surface treatments including Cornell VEP and RF test on this 9-cell cavity. The progress by the VEP collaboration and RF test results are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB073

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPB074

RF Performance of Multi-cell Scale Niobium SRF Cavities Prepared with HF Free Bipolar Electro-polishing at Faraday Technology

567

F. Furuta, M. Ge, T. Gruber, J.J. Kaufman, M. Liepe, J. Sears
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
T.D. Hall, M.E. Inman, R. Radhakrishnan, S.T. Snyder, E.J. Taylor
Faraday Technology, Inc., Clayton, Ohio, USA

Cornell's SRF group and Faraday Technology, Inc. have been collaborating on two phase-II SBIR projects. One of them is the development and commissioning of a 9-cell scale HF free Bipolar Electro-Polishing (BEP) system. Faraday Technology had completed the proof of principle on BEP with single cell scale prior to the work reported here, and has now developed a new 9-cell scale BEP system. Cornell has fabricated three single cell cavities and has assembled them together as a 9-cell scale test string. The 9-cell scale test string has received BEP at Faraday Technology and RF testing has been performed on the three single cell cavities one-by-one at Cornell. Here we give a status update on the new 9-cell scale BEP system commissioning and on results from RF tests of the BEP cavities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-TUPB074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB003

An Innovative Design of a Flexible Temperature-mapping System

746

M. Ge, F. Furuta, M. Liepe, P.J. Pamel
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

A temperature-mapping (T-Map) system is an essential tool for fundamental SRF research as it provides spatial information of RF power dissipation and so allows localizing hot-spots on a cavity surface at cryogenic temperatures. However, the temperature sensors are mounted on rigid boards in most current systems, so each can only work for one specific cavity size and shape. In this paper, we proposed a flexible design, which allows this temperature mapping system to work for different cavity shapes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB004

Impact of the Duration of Low Temperature Doping on Superconducting Cavity Performance

750

P.N. Koufalis, F. Furuta, J.J. Kaufman, M. Liepe
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Low temperature treatments of superconducting cavities in a low pressure ambient atmosphere have been shown to introduce a 'Q-rise' up to moderate surface fields and an overall increase in quality factor. However, the effect of varying the doping time at a fixed temperature on cavity performance has not been systematically examined. We present results of such an investigation for cavities prepared at 120 and 160 C in a continuously flowing low pressure atmosphere for various amounts of time. We show that the introduction of impurities to the RF penetration layer can improve cavity performance and investigate the relationship between electron mean free path and the temperature-dependent component of the surface resistance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPB043

Effects of Chemical Treatments on the Surface Roughess and Surface Magnetic Field Ehancement of Niobium-3 Tin Films for Superconducting Radio-Frequency Cavities

848

R.D. Porter, F. Furuta, D.L. Hall, M. Liepe, J.T. Maniscalco
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Current niobium-3 tin (Nb3Sn) films produced via vapor diffusion have rougher surfaces than typical electropolished niobium surfaces causing significantly enhancement of the surface magnetic fields. Reducing surface roughness of Nb3Sn surfaces may be necessary to achieve higher gradient accelerator cavities with high Q. Previous work at Cornell has shown the impact of several chemical treatments on the surface roughness of Nb3Sn films; however, it had not been evaluated how the changes in surface roughness impact the surface magnetic field enhancement. In this paper we present simulations of the surface field enhancement of oxipolished Nb3Sn, which was shown to be effective at reducing the surface roughness of Nb3Sn. The surface magnetic field enhancement data is compared to those of unetched Nb3Sn to find that the surface magnetic field enhancement (and surface roughness) has been roughly halved.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-THPB043

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXAA02

High-efficiency, High-current Optimized Main-linac ERL Cryomodule

935

F. Furuta, N. Banerjee, A.C. Bartnik, J. Dobbins, R.G. Eichhorn, M. Ge, G.H. Hoffstaetter, M. Liepe, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

The Main Linac Cryomodule (MLC) prototype is a key component of the Cornell-BNL ERL Test Accelerator (CBETA) project, which is a 4-turn FFAG ERL currently under construction at Cornell University. This novel cryomodule is the first SRF module ever to be fully optimized simultaneously for high efficient SRF cavity operation and for supporting very high CW beam currents. After a successful initial MLC testing, the MLC has now been moved into its final location for the CBETA ring. For a first beam test of the MLC and CBETA, the Cornell ERL high voltage DC gun and SRF injector cryomodule were connected to MLC via an entry beam line; a beam stop assembly was also installed at the exit line. In this paper, we summarize the performance of this novel ERL cryomodule including the results of the first beam test and the additional tests focused on RF field stability and cavity microphonics.

Slides FRXAA02 [8.792 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-FRXAA02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)