RuPAC2014 - List of Keywords (Windows)

Paper	Title	Other Keywords	Page
THPSC04	Study of Normal Conducting Accelerating Structures for Megawatt Proton Driver Linac	rfq, linac, cavity, coupling	321
	S.M. Polozov, A.E. Aksentyev, A.A. Kalashnikova, T. Kulevoy, M.V. Lalayan, S.E. Toporkov MEPhI, Moscow, Russia
	Funding: This project was supported by the Ministry of Science and Education of Russia under contract No. 14.516.11.0084 The preliminary design of megawatt level proton accelerator-driver is carrying out by collaboration between Russian scientific centers MEPhI, ITEP, Kurchatov Institute. This project was supported in 2013 by the Ministry of Science and Education of Russia. The linac general layout includes RFQ section and section(s) with radiofrequency focusing. The different types of RF focusing were studied due to this project: RF crossed lenses, modified electrodes RFQ, axi-symmetrical RF focusing. All such focusing can be realized by IH-type cavities. The design of segmented vane RFQ (SVRFQ) with coupling windows and IH⁻ and CH-type normal conducting cavities will discuss in the report. All cavities operate on 162 MHz. The main electrodynamics simulation results will present.

THPSC06	Development and Testing of Powerful High-voltage Electron Accelerator for Energy-intensive Industries	electron, extraction, operation, high-voltage	327
	N.G. Tolstun, A.V. Efremov, A.N. Kuzhlev, A.I. Machecha, V.P. Maznev, V.P. Ovchinnikov, D.E. Pavluhov, M.P. Svinin NIIEFA, St. Petersburg, Russia
	The report describes the results of the development and testing of the Electron-23high-voltage high-power electron accelerator rated for an accelerating voltage of 1 MV and beam power up to 500 kW at the "NIIEFA" testing facilities. The accelerator is intended for industrial processing of flue gases from coal burning thermal power stations with the aim to reduce concentrations of nitrogen and sulfur oxides. The accelerator may also be used for other energy-consuming processes, such as radiation treatment of wastewater for the purpose of their decontamination or processing of natural gases for their conversion into engine fuel. The report describes the main components and systems of the accelerator, such as the high-voltage generator, the accelerating voltage regulation device, the electron-optical system, the electron source and the accelerating tube, the irradiation field forming system, the beam output device and vacuum system.

THPSC32	U-70 Accelerator Complex: Centralized Access to IP-Devices with Embedded Web-Server	controls, network, booster, distributed	389
	Yu.V. Milichenko, E.V. Takaeva, V.P. Voevodin IHEP, Moscow Region, Russia
	The paper describes our efforts to organize centralized access to IP-devices of specific types. Each device includes proper embedded web-server and is connected to an accelerator department network. Today there are tens of the devices are used to give pictures online. A device access is carried out by user understandable device names with the aid of accelerator department web-server. Some arisen problems are pointed. Possible manifold forms of on screen presentation of pictures derived from devices are presented.

Paper

Title

Other Keywords

Page

THPSC04

Study of Normal Conducting Accelerating Structures for Megawatt Proton Driver Linac

rfq, linac, cavity, coupling

321

S.M. Polozov, A.E. Aksentyev, A.A. Kalashnikova, T. Kulevoy, M.V. Lalayan, S.E. Toporkov
MEPhI, Moscow, Russia

Funding: This project was supported by the Ministry of Science and Education of Russia under contract No. 14.516.11.0084
The preliminary design of megawatt level proton accelerator-driver is carrying out by collaboration between Russian scientific centers MEPhI, ITEP, Kurchatov Institute. This project was supported in 2013 by the Ministry of Science and Education of Russia. The linac general layout includes RFQ section and section(s) with radiofrequency focusing. The different types of RF focusing were studied due to this project: RF crossed lenses, modified electrodes RFQ, axi-symmetrical RF focusing. All such focusing can be realized by IH-type cavities. The design of segmented vane RFQ (SVRFQ) with coupling windows and IH⁻ and CH-type normal conducting cavities will discuss in the report. All cavities operate on 162 MHz. The main electrodynamics simulation results will present.

THPSC06

Development and Testing of Powerful High-voltage Electron Accelerator for Energy-intensive Industries

electron, extraction, operation, high-voltage

327

N.G. Tolstun, A.V. Efremov, A.N. Kuzhlev, A.I. Machecha, V.P. Maznev, V.P. Ovchinnikov, D.E. Pavluhov, M.P. Svinin
NIIEFA, St. Petersburg, Russia

The report describes the results of the development and testing of the Electron-23high-voltage high-power electron accelerator rated for an accelerating voltage of 1 MV and beam power up to 500 kW at the "NIIEFA" testing facilities. The accelerator is intended for industrial processing of flue gases from coal burning thermal power stations with the aim to reduce concentrations of nitrogen and sulfur oxides. The accelerator may also be used for other energy-consuming processes, such as radiation treatment of wastewater for the purpose of their decontamination or processing of natural gases for their conversion into engine fuel. The report describes the main components and systems of the accelerator, such as the high-voltage generator, the accelerating voltage regulation device, the electron-optical system, the electron source and the accelerating tube, the irradiation field forming system, the beam output device and vacuum system.

THPSC32

U-70 Accelerator Complex: Centralized Access to IP-Devices with Embedded Web-Server

controls, network, booster, distributed

389

Yu.V. Milichenko, E.V. Takaeva, V.P. Voevodin
IHEP, Moscow Region, Russia

The paper describes our efforts to organize centralized access to IP-devices of specific types. Each device includes proper embedded web-server and is connected to an accelerator department network. Today there are tens of the devices are used to give pictures online. A device access is carried out by user understandable device names with the aid of accelerator department web-server. Some arisen problems are pointed. Possible manifold forms of on screen presentation of pictures derived from devices are presented.