IPAC2019 - List of Keywords (instrumentation)

Paper	Title	Other Keywords	Page
WEZPLM1	The LATINO Project - An Italian Perspective on Connecting SMEs with Research Infrastructures	vacuum, laser, radio-frequency, operation	2277
	L. Sabbatini, D. Alesini, A. Falone, A. Gallo INFN/LNF, Frascati, Italy V. Pettinacci INFN-Roma, Roma, Italy
	Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’). The National Laboratories of Frascati (LNF) are the first Italian research facility for the study of nuclear and subnuclear physics with accelerators and are the largest laboratories of the Italian National Institute for Nuclear Physics (INFN), the public body whose mission is theoretical, experimental and technological research in subnuclear, nuclear and astroparticle physics. LNF have an extensive experience in designing, installation, testing and operation of particle accelerators and the related technologies. The competences range over almost all the technologies related to particle accelerators, including radio frequency, vacuum, magnets and mechanics. LNF have always had a close relationship with the regional and national industries, stimulating the development and growth of the industrial background by means of close collaboration with partners. The LATINO (a Laboratory in Advanced Technologies for INnOvation) project is an initiative that fits into this path and aims to strengthen this relationship, allowing access to the technologies, instruments and competences not otherwise available to the enterprises. A modern vision of advanced economies recommends the Technology Transfer from the research world to the productive activities through the creation of research infrastructures as the most efficient system for generating innovation and economic development [1-3]. The Regione Lazio, despite hosting centres of excellence, has a delay in the establishment of this kind of infrastructures.
	Slides WEZPLM1 [4.103 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZPLM1
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW052	A Rotation Method to Calibrate BPM Electric Offsets	laser, site, radiation, proton	2595
	M.W. Wang, X. Guan, P.F. Ma, X.W. Wang, S.X. Zheng TUB, Beijing, People’s Republic of China M.T. Qiu, D. Wang, Z.M. Wang NINT, Shannxi, People’s Republic of China
	Beam position monitor is a key instrument for machine commissioning. To measure beam position accurately, offline calibrations to acquire the sensitivity and offsets of the BPM are essential prerequisites. A new method to calibrate the BPM electric offset is proposed in this paper. By measuring the location variation of the BPM electric center after rotatingtheBPM180degrees, theBPMoffsetcanbederived. The method is more convenient, universal and accurate than the traditional methods. The method is successfully applied to calibrate the button BPM of Xi’an Proton Application Facility. The repetitive measurement error is 20.8 um.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW052
About •	paper received ※ 16 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW063	Fiber-based Cherenkov Beam Loss and Beam Profile Monitor at BEPC II	linac, operation, electron, beam-losses	2622
	L. Yu, Y.F. Sui, L. Wang, D.C. Zhu IHEP, Beijing, People’s Republic of China
	A fiber-based Cherenkov beam loss monitor (CBLM) consisting of large core (400μm), long (50 m) multimode fibers, has been developed as an long-range detection tool for the BEPCII: primarily designed for radiation safety in order to limit the dose outside the shielding of the machine, this monitor also serves as an tool to measure beam profile with the wire sccaner. In this paper, principal of operation, instrumentation and programming of these CBLMs are discussed. Some results of beam loss and beam profile measurement with these CBLMs are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW063
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW030	Towards the First Beams from the ADIGE Injector for the SPES Project	plasma, ECR, injection, ion-source	3647
	A. Galatà, L. Bellan, J. Bermudez, G. Bisoffi, D. Bortolato, M. Comunian, A. Conte, M. De Lazzari, P. Francescon, F. Gelain, D. Marcato, M.O. Miglioranza, M.F. Moisio, E. Munaron, S. Pavinato, D. Pedretti, A. Pisent, M. Roetta, C.R. Roncolato, M. Rossignoli, G. Savarese INFN/LNL, Legnaro (PD), Italy V. Andreev ITEP, Moscow, Russia J. Angot, D. Bondoux, T. Thuillier LPSC, Grenoble Cedex, France M.A. Bellato INFN- Sez. di Padova, Padova, Italy
	The ADIGE (Acceleratore Di Ioni a Grande carica Esotici) injector of the SPES (Selective Production of Exotic Species) project is now in an advanced phase of installation. Its main components have been designed following particular needs of the project: first, an Electron Cyclotron Resonance (ECR)-based Charge Breeder (SPES-CB), to boost the charge states of the radioactive ions produced at SPES and allow their post-acceleration. Then, a stable 1+ source and a complete electrostatic beam line to characterize the SPES-CB. Finally, a unique Medium Resolution Mass Spectrometer (MRMS, R=1/1000), mounted on a high voltage platform downstream the SPES-CB, to clean the radioactive beam from the contaminants induced by the breeding stage. This contribution describes the status of the injector, in particular the installation of the platform housing the MRMS, the access and safety system adopted and the first beams to be extracted from the stable 1+ source.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW030
About •	paper received ※ 30 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB085	HiRadMat: A Facility Beyond the Realms of Materials Testing	proton, experiment, radiation, target	4016
	F.J. Harden, A. Bouvard, N. Charitonidis, Y. Kadi CERN, Geneva, Switzerland
	The ever-expanding requirements of high-power targets and accelerator equipment has highlighted the need for facilities capable of accommodating experiments with a diverse range of objectives. HiRadMat, a High Radiation to Materials testing facility at CERN has, throughout operation, established itself as a global user facility capable of going beyond its initial design goals. Pulsed high energy, high intensity, proton beams have been delivered to experiments ranging from materials testing, detector’s prototype validation, radiation to electronics assessment and beam instrumentation. A 440 GeV/c proton beam is provided directly from the CERN SPS. Up to 288 bunches/pulse at a maximum pulse intensity of 3.5 x 10¹³ protons/pulse can be delivered. Through collaborative efforts, HiRadMat has developed into a state-of-the-art facility with improved in situ measurement routines, beam diagnostic systems and data acquisition techniques, offered to all users. This contribution summarises the recent experimental achievements, highlights previous facility enhancements and discusses potential future upgrades with particular focus on HiRadMat as a facility open to novel experiments.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB085
About •	paper received ※ 29 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS1	Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam	vacuum, pick-up, experiment, electron	4368
	N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, A.M. Moutardier LAL, Orsay, France
	Funding: CNRS/IN2P3 We have successfully printed a beam position monitor using 3D printing. After ultra-high vacuum testing and initial measurements with a network analyser we now reports on tests of this BPM using the stretched wire method. The BPM has been installed on a test stand with a wire going through it and electrical pulses have been sent. The signal measured on the pick-ups was compared to that of two conventional BPMs and shows no anomaly specific to the 3D printed BPMs. Following the success of these tests we have also installed this BPM in a beam line at the PhotoInjector at LAL (PHIL). We show that it can give position measurements with an accuracy comparable to that of other BPMs.
	Slides FRXXPLS1 [29.118 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS1
About •	paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEZPLM1

The LATINO Project - An Italian Perspective on Connecting SMEs with Research Infrastructures

vacuum, laser, radio-frequency, operation

2277

L. Sabbatini, D. Alesini, A. Falone, A. Gallo
INFN/LNF, Frascati, Italy
V. Pettinacci
INFN-Roma, Roma, Italy

Funding: The LATINO project is co-funded by the Regione Lazio within POR-FESR 2014-2020 European activities (public call ’Open Research Infrastructures’).
The National Laboratories of Frascati (LNF) are the first Italian research facility for the study of nuclear and subnuclear physics with accelerators and are the largest laboratories of the Italian National Institute for Nuclear Physics (INFN), the public body whose mission is theoretical, experimental and technological research in subnuclear, nuclear and astroparticle physics. LNF have an extensive experience in designing, installation, testing and operation of particle accelerators and the related technologies. The competences range over almost all the technologies related to particle accelerators, including radio frequency, vacuum, magnets and mechanics. LNF have always had a close relationship with the regional and national industries, stimulating the development and growth of the industrial background by means of close collaboration with partners. The LATINO (a Laboratory in Advanced Technologies for INnOvation) project is an initiative that fits into this path and aims to strengthen this relationship, allowing access to the technologies, instruments and competences not otherwise available to the enterprises. A modern vision of advanced economies recommends the Technology Transfer from the research world to the productive activities through the creation of research infrastructures as the most efficient system for generating innovation and economic development [1-3]. The Regione Lazio, despite hosting centres of excellence, has a delay in the establishment of this kind of infrastructures.

Slides WEZPLM1 [4.103 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEZPLM1

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW052

A Rotation Method to Calibrate BPM Electric Offsets

laser, site, radiation, proton

2595

M.W. Wang, X. Guan, P.F. Ma, X.W. Wang, S.X. Zheng
TUB, Beijing, People’s Republic of China
M.T. Qiu, D. Wang, Z.M. Wang
NINT, Shannxi, People’s Republic of China

Beam position monitor is a key instrument for machine commissioning. To measure beam position accurately, offline calibrations to acquire the sensitivity and offsets of the BPM are essential prerequisites. A new method to calibrate the BPM electric offset is proposed in this paper. By measuring the location variation of the BPM electric center after rotatingtheBPM180degrees, theBPMoffsetcanbederived. The method is more convenient, universal and accurate than the traditional methods. The method is successfully applied to calibrate the button BPM of Xi’an Proton Application Facility. The repetitive measurement error is 20.8 um.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW052

About •

paper received ※ 16 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW063

Fiber-based Cherenkov Beam Loss and Beam Profile Monitor at BEPC II

linac, operation, electron, beam-losses

2622

L. Yu, Y.F. Sui, L. Wang, D.C. Zhu
IHEP, Beijing, People’s Republic of China

A fiber-based Cherenkov beam loss monitor (CBLM) consisting of large core (400μm), long (50 m) multimode fibers, has been developed as an long-range detection tool for the BEPCII: primarily designed for radiation safety in order to limit the dose outside the shielding of the machine, this monitor also serves as an tool to measure beam profile with the wire sccaner. In this paper, principal of operation, instrumentation and programming of these CBLMs are discussed. Some results of beam loss and beam profile measurement with these CBLMs are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW063

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW030

Towards the First Beams from the ADIGE Injector for the SPES Project

plasma, ECR, injection, ion-source

3647

A. Galatà, L. Bellan, J. Bermudez, G. Bisoffi, D. Bortolato, M. Comunian, A. Conte, M. De Lazzari, P. Francescon, F. Gelain, D. Marcato, M.O. Miglioranza, M.F. Moisio, E. Munaron, S. Pavinato, D. Pedretti, A. Pisent, M. Roetta, C.R. Roncolato, M. Rossignoli, G. Savarese
INFN/LNL, Legnaro (PD), Italy
V. Andreev
ITEP, Moscow, Russia
J. Angot, D. Bondoux, T. Thuillier
LPSC, Grenoble Cedex, France
M.A. Bellato
INFN- Sez. di Padova, Padova, Italy

The ADIGE (Acceleratore Di Ioni a Grande carica Esotici) injector of the SPES (Selective Production of Exotic Species) project is now in an advanced phase of installation. Its main components have been designed following particular needs of the project: first, an Electron Cyclotron Resonance (ECR)-based Charge Breeder (SPES-CB), to boost the charge states of the radioactive ions produced at SPES and allow their post-acceleration. Then, a stable 1+ source and a complete electrostatic beam line to characterize the SPES-CB. Finally, a unique Medium Resolution Mass Spectrometer (MRMS, R=1/1000), mounted on a high voltage platform downstream the SPES-CB, to clean the radioactive beam from the contaminants induced by the breeding stage. This contribution describes the status of the injector, in particular the installation of the platform housing the MRMS, the access and safety system adopted and the first beams to be extracted from the stable 1+ source.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW030

About •

paper received ※ 30 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB085

HiRadMat: A Facility Beyond the Realms of Materials Testing

proton, experiment, radiation, target

4016

F.J. Harden, A. Bouvard, N. Charitonidis, Y. Kadi
CERN, Geneva, Switzerland

The ever-expanding requirements of high-power targets and accelerator equipment has highlighted the need for facilities capable of accommodating experiments with a diverse range of objectives. HiRadMat, a High Radiation to Materials testing facility at CERN has, throughout operation, established itself as a global user facility capable of going beyond its initial design goals. Pulsed high energy, high intensity, proton beams have been delivered to experiments ranging from materials testing, detector’s prototype validation, radiation to electronics assessment and beam instrumentation. A 440 GeV/c proton beam is provided directly from the CERN SPS. Up to 288 bunches/pulse at a maximum pulse intensity of 3.5 x 10¹³ protons/pulse can be delivered. Through collaborative efforts, HiRadMat has developed into a state-of-the-art facility with improved in situ measurement routines, beam diagnostic systems and data acquisition techniques, offered to all users. This contribution summarises the recent experimental achievements, highlights previous facility enhancements and discusses potential future upgrades with particular focus on HiRadMat as a facility open to novel experiments.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB085

About •

paper received ※ 29 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS1

Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam

vacuum, pick-up, experiment, electron

4368

N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, A.M. Moutardier
LAL, Orsay, France

Funding: CNRS/IN2P3
We have successfully printed a beam position monitor using 3D printing. After ultra-high vacuum testing and initial measurements with a network analyser we now reports on tests of this BPM using the stretched wire method. The BPM has been installed on a test stand with a wire going through it and electrical pulses have been sent. The signal measured on the pick-ups was compared to that of two conventional BPMs and shows no anomaly specific to the 3D printed BPMs. Following the success of these tests we have also installed this BPM in a beam line at the PhotoInjector at LAL (PHIL). We show that it can give position measurements with an accuracy comparable to that of other BPMs.

Slides FRXXPLS1 [29.118 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS1

About •

paper received ※ 19 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)