Paper |
Title |
Other Keywords |
Page |
WEPD013 |
Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling
|
controls, quadrupole, superconducting-magnet, dipole |
2431 |
|
- V. S. Kashikhin, N. Andreev, A. N. Didenko, V. Kashikhin, M. J. Lamm, A. V. Makarov, K. Yonehara, A. V. Zlobin
Fermilab, Batavia, Illinois
- R. P. Johnson, S. A. Kahn
Muons, Inc, Batavia
|
Novel configurations of superconducting magnets for helical muon beam cooling channels and demonstration experiments are being designed at Fermilab. The magnet system for helical cooling channels has to generate longitudinal solenoidal and transverse helical dipole and helical quadrupole fields. This paper discusses the Helical Solenoid model design and manufacturing of a 0.6 m diameter, 4-coil solenoid prototype to prove the design concept, fabrication technology, and the magnet system performance. Results of magnetic and mechanical designs with the 3D analysis by TOSCA, ANSYS and COMSOL will be presented. The model quench performance and the test setup in the FNAL Vertical Magnet Test Facility cryostat will be discussed.
|
|
|
|
WEPD015 |
Design Studies of Magnet Systems for Muon Helical Cooling Channels
|
dipole, quadrupole, target, superconductivity |
2437 |
|
- V. Kashikhin, V. S. Kashikhin, M. J. Lamm, M. L. Lopes, A. V. Zlobin
Fermilab, Batavia, Illinois
- M. Alsharo'a, R. P. Johnson, S. A. Kahn
Muons, Inc, Batavia
|
Helical cooling channels consisting of a magnet system with superimposed solenoid, helical dipole and quadrupole fields, and a pressurized gas absorber in the aperture, promise high efficiency in providing 6D muon beam cooling for a future Muon Collider and some other applications. Two alternative designs of the magnet system for the helical cooling channel are being investigated at the present time. The first one is based on a straight, large aperture solenoid with helical dipole and quadrupole coils. The other one is based on a spiral solenoid which generates the main solenoid field and the helical dipole and quadrupole components. Both concepts have been developed and compared for the MANX experiment. In this paper we continue design studies and comparison of these two concepts for the high field sections of a helical cooling channel. The results of magnetic and mechanical analysis as well as the superconductor choice and specifications will be presented and discussed.
|
|
|
|
WEPD022 |
High Field Superconductor for Muon Cooling
|
collider, superconducting-magnet, emittance, magnet-design |
2455 |
|
- J. Schwartz
NHMFL, Tallahassee, Florida
- R. P. Johnson, S. A. Kahn, M. Kuchnir
Muons, Inc, Batavia
|
High temperature superconductors (HTS) have been shown to carry significant current density in the presence of extremely high magnetic fields when operated at low temperature. The successful design of magnets needed for high energy physics applications using such high field superconductor (HFS) depends critically on the detailed wire or tape parameters which are still under development and not yet well-defined. In the project reported here, we are developing HFS for accelerator use by concentrating on the design of an innovative magnet that will have a useful role in muon beam cooling. Measurements of available materials and a conceptual design of a high field solenoid using YBCO HFS conductor are being analyzed with the goal of providing useful guidance to superconductor manufacturers for materials well suited to accelerator applications.
|
|
|
|
WEPP153 |
Status of the MANX Muon Cooling Experiment
|
emittance, dipole, simulation, collider |
2844 |
|
- K. Yonehara, D. R. Broemmelsiek, M. Hu, A. Jansson, V. Kashikhin, V. S. Kashikhin, M. J. Lamm, M. L. Lopes, V. D. Shiltsev, V. Yarba, M. Yu, A. V. Zlobin
Fermilab, Batavia, Illinois
- R. J. Abrams, M. A.C. Cummings, R. P. Johnson, S. A. Kahn, T. J. Roberts
Muons, Inc, Batavia
|
MANX is an experiment to prove that effective six-dimensional (6D) muon beam cooling can be achieved a Helical Cooling Channel (HCC) using ionization-cooling with helical and solenoidal magnets in a novel configuration. The aim is to demonstrate that 6D muon beam cooling is understood well enough to plan intense neutrino factories and high-luminosity muon colliders. The experiment consists of the HCC magnets that envelop a liquid helium energy absorber, upstream and downstream instrumentation to measure the particle or beam parameters before and after cooling, and emittance matching sections between the detectors and the HCC. Studies are presented of the effects of detector resolution and magnetic field errors on the beam cooling measurements.
|
|
|
|