Cyclotrons2016 - List of Keywords (coupling)

Paper	Title	Other Keywords	Page
TUP17	Preliminary Design of RF System for SC200 Superconducting Cyclotron	cavity, proton, cyclotron, simulation	208
	G. Chen, Y.F. Bi, C. Chao, Y. Chen, K.Z. Ding, H. Feng, Y. Song, S.Y. Wang, M. Xu, Q. Yang, X. Zhang, J. Zheng, J. Zhou ASIPP, Hefei, People's Republic of China O. Karamyshev, G.A. Karamysheva, N.A. Morozov, E.V. Samsonov, G. Shirkov JINR, Dubna, Moscow Region, Russia
	The SC200 is a compact superconducting cyclotron, which is designed under the collaboration of ASIPP (Hefei, China)-JINR (Dubna, Russia), for proton therapy. The protons are accelerated to 200 Mev with maximum beam current of 500 nA. The very high mean magnetic field of 2.9T-3.5T (center-extraction) challenges the design of radio frequency (RF) system because of the restricted space. The orbital frequency of the protons is ~45 MHz according to the magnetic field and beam dynamics. The RF system is supposed to operate on 2rd harmonic of ~90 MHz. Two Dee cavities located at the valley of the magnet have been adopted. The preliminary design of RF system, which consists of active tuning, coupling and so on, is presented. The computation and simulation showed good results to ensure the Dee cavities operating at the 2rd harmonic and the proper variation of acceleration voltage versus radius.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEB03	Design and Simulation of Cavity for 18 MeV Cyclotron	cavity, cyclotron, simulation, impedance	267
	M. Mousavinia, H. Afarideh AUT, Tehran, Iran M. Ghergherehchi SKKU, Suwon, Republic of Korea
	RF system is the key part of cyclotron and cavity is the key part of RF system. The basic parameters of cavity design are the resonant frequency , dee voltage , RF phase and RF power. Proper operation of cavity depends on the suitable voltage distribution in accelerating gap, phase stability in cavity and as well as optimal scattering parameters. In this simulation by using CST MWS, different parts of cavity such as stam and dee are optimized to achieved optimum dimesnsions for desired resonant freq, dee voltage and RF power. Properties of designed cavity including: resonant frequency at 64.3 MHz, dee voltage is 45 kV and RF power is 11 kW.
	Slides WEB03 [3.767 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

TUP17

Preliminary Design of RF System for SC200 Superconducting Cyclotron

cavity, proton, cyclotron, simulation

208

G. Chen, Y.F. Bi, C. Chao, Y. Chen, K.Z. Ding, H. Feng, Y. Song, S.Y. Wang, M. Xu, Q. Yang, X. Zhang, J. Zheng, J. Zhou
ASIPP, Hefei, People's Republic of China
O. Karamyshev, G.A. Karamysheva, N.A. Morozov, E.V. Samsonov, G. Shirkov
JINR, Dubna, Moscow Region, Russia

The SC200 is a compact superconducting cyclotron, which is designed under the collaboration of ASIPP (Hefei, China)-JINR (Dubna, Russia), for proton therapy. The protons are accelerated to 200 Mev with maximum beam current of 500 nA. The very high mean magnetic field of 2.9T-3.5T (center-extraction) challenges the design of radio frequency (RF) system because of the restricted space. The orbital frequency of the protons is ~45 MHz according to the magnetic field and beam dynamics. The RF system is supposed to operate on 2rd harmonic of ~90 MHz. Two Dee cavities located at the valley of the magnet have been adopted. The preliminary design of RF system, which consists of active tuning, coupling and so on, is presented. The computation and simulation showed good results to ensure the Dee cavities operating at the 2rd harmonic and the proper variation of acceleration voltage versus radius.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEB03

Design and Simulation of Cavity for 18 MeV Cyclotron

cavity, cyclotron, simulation, impedance

267

M. Mousavinia, H. Afarideh
AUT, Tehran, Iran
M. Ghergherehchi
SKKU, Suwon, Republic of Korea

RF system is the key part of cyclotron and cavity is the key part of RF system. The basic parameters of cavity design are the resonant frequency , dee voltage , RF phase and RF power. Proper operation of cavity depends on the suitable voltage distribution in accelerating gap, phase stability in cavity and as well as optimal scattering parameters. In this simulation by using CST MWS, different parts of cavity such as stam and dee are optimized to achieved optimum dimesnsions for desired resonant freq, dee voltage and RF power. Properties of designed cavity including: resonant frequency at 64.3 MHz, dee voltage is 45 kV and RF power is 11 kW.

Slides WEB03 [3.767 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)