IPAC2015 - List of Authors (Ptitsyn, V.)

Paper	Title	Page
TUPMA049	First Beam Commissioning at BNL ERL SRF Gun	1941
	W. Xu, Z. Altinbas, S.A. Belomestnykh, I. Ben-Zvi, S. Deonarine, D.M. Gassner, H. Hahn, L.R. Hammons, T. Hayes, J.P. Jamilkowski, P. K. Kankiya, D. Kayran, N. Laloudakis, R.F. Lambiase, V. Litvinenko, L. Masi, G.T. McIntyre, K. Mernick, T.A. Miller, G. Narayan, D. Phillips, V. Ptitsyn, T. Rao, T. Seda, F. Severino, B. Sheehy, K.S. Smith, A.N. Steszyn, T.N. Tallerico, R. Than, J.E. Tuozzolo, E. Wang, D. Weiss, M. Wilinski, A. Zaltsman BNL, Upton, Long Island, New York, USA S.A. Belomestnykh, I. Ben-Zvi, V. Litvinenko, V. Ptitsyn Stony Brook University, Stony Brook, USA
	Funding: This work is supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE. The 704 MHz superconducting RF gun successfully generated the first photoemission beam on Nov. 17 2014. This paper will report the latest results of SRF beam commissioning, including the SRF cavity performance, cathode QE measurements, and beam parameter measurements. The beam commissioning setup is described in the paper as well.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA049
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY047	ERL with Non-Scaling Fixed Field Alternating Gradient Lattice for eRHIC	2120
	D. Trbojevic, J.S. Berg, S.J. Brooks, Y. Hao, V. Litvinenko, C. Liu, F. Méot, M.G. Minty, V. Ptitsyn, T. Roser, P. Thieberger, N. Tsoupas BNL, Upton, Long Island, New York, USA
	Funding: Work performed under Contract Number DE-AC02-98CH10886 with the auspices of the US Department of Energy. The proposed eRHIC electron-hadron collider uses a "non-scaling FFAG" lattice to recirculate 16 turns of different energy through just two beamlines located in the RHIC tunnel. This paper presents lattices for these two FFAGs that are optimised for low magnet field and to minimise total synchrotron radiation across the energy range. The higher number of recirculations in the FFAG allows a shorter linac (1.322GeV) to be used, drastically reducing cost, while still achieving a 21.2GeV maximum energy to collide with one of the existing RHIC hadron rings at up to 250GeV. eRHIC uses many cost-saving measures in addition to the FFAG: the linac operates in energy recovery mode, so the beams also decelerate via the same FFAG loops and energy is recovered from the interacted beam. All magnets will constructed from NdFeB permanent magnet material, meaning chillers and large magnet power supplies are not needed. This paper also describes a smaller prototype ERL-FFAG accelerator that will test all of these technologies in combination to reduce technical risk for eRHIC.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY047
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI049	Polarized Proton Beam for eRHIC	2360
	H. Huang, F. Méot, V. Ptitsyn, T. Roser BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. RHIC has provided polarized proton collisions from 31 GeV to 255 GeV in past decade. To preserve polarization through numerous depolarizing resonances through the whole accelerator chain, harmonic orbit correction, partial snakes, horizontal tune jump system and full snakes have been used. In addition, close attentions have been paid to betatron tune control, orbit control and beam line alignment. The polarization of 60% at 255 GeV has been delivered to experiments with 1.8×10¹¹ bunch intensity. For the eRHIC era, the beam brightness has to be maintained to reach the desired luminosity. Since we only have one hadron ring in the eRHIC era, existing spin rotator and snakes can be converted to six snake configuration for one hadron ring. With properly arranged six snakes, the polarization can be maintained at 70% at 250 GeV. This paper summarizes the effort and plan to reach high polarization with small emittance for eRHIC.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI049
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI050	Optics Correction for the Multi-pass FFAG ERL Machine eRHIC	2363
	C. Liu, S.J. Brooks, V. Litvinenko, M.G. Minty, V. Ptitsyn, D. Trbojevic BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Gradient errors in the multi-pass Fixed Field Alternating Gradient (FFAG) Energy Recovery Linac (ERL) machine, eRHIC, distort the beam orbit and therefore cause emittance increase. The localization and correction of gradient errors are essential for an effective orbit correction and emittance preservation. In this report, the methodology and simulation of optics correction for the multi-pass FFAG ERL machine eRHIC will be presented. The work was performed under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI050
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI051	Study of Orbit Correction for eRHIC FFAG Design	2366
	C. Liu, Y. Hao, V. Litvinenko, F. Méot, M.G. Minty, V. Ptitsyn, D. Trbojevic BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The chromaticities in the eRHIC linear non-scaling Fixed Field Alternating Gradient (FFAG) lattice are very large. Therefore, particles will decohere in phase space given the presence of lattice errors. The decoherence causes a deviation of the orbit response which is the basis for orbit corrections. In this report we will present a study of the linearity of the orbit response in a lattice with large chromaticity, a comparison of the results of orbit corrections for several cases together with a conclusion that correcting the average orbit with a measured orbit response works as good as an orbit correction for on-momentum particles. The work was performed under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI051
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI052	End-to-end 9-D⁺SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects	2369
	F. Méot, S.J. Brooks, V. Ptitsyn, D. Trbojevic, N. Tsoupas BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The energy-recovery electron beam recirculator, part of the eRHIC electron-ion collider project complex at BNL, is subject to feasibility studies in an FFAG arc based version. We develop here on tracking simulations and their analysis, regarding end-to-end polarized e-bunch transport in presence of synchrotron radiation, magnet alignment and field errors. Simulations include the evolution of energy, orbits, emittances, polarization profiles.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI052
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First Beam Commissioning at BNL ERL SRF Gun

1941

W. Xu, Z. Altinbas, S.A. Belomestnykh, I. Ben-Zvi, S. Deonarine, D.M. Gassner, H. Hahn, L.R. Hammons, T. Hayes, J.P. Jamilkowski, P. K. Kankiya, D. Kayran, N. Laloudakis, R.F. Lambiase, V. Litvinenko, L. Masi, G.T. McIntyre, K. Mernick, T.A. Miller, G. Narayan, D. Phillips, V. Ptitsyn, T. Rao, T. Seda, F. Severino, B. Sheehy, K.S. Smith, A.N. Steszyn, T.N. Tallerico, R. Than, J.E. Tuozzolo, E. Wang, D. Weiss, M. Wilinski, A. Zaltsman
BNL, Upton, Long Island, New York, USA
S.A. Belomestnykh, I. Ben-Zvi, V. Litvinenko, V. Ptitsyn
Stony Brook University, Stony Brook, USA

Funding: This work is supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE.
The 704 MHz superconducting RF gun successfully generated the first photoemission beam on Nov. 17 2014. This paper will report the latest results of SRF beam commissioning, including the SRF cavity performance, cathode QE measurements, and beam parameter measurements. The beam commissioning setup is described in the paper as well.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA049

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY047

ERL with Non-Scaling Fixed Field Alternating Gradient Lattice for eRHIC

2120

D. Trbojevic, J.S. Berg, S.J. Brooks, Y. Hao, V. Litvinenko, C. Liu, F. Méot, M.G. Minty, V. Ptitsyn, T. Roser, P. Thieberger, N. Tsoupas
BNL, Upton, Long Island, New York, USA

Funding: Work performed under Contract Number DE-AC02-98CH10886 with the auspices of the US Department of Energy.
The proposed eRHIC electron-hadron collider uses a "non-scaling FFAG" lattice to recirculate 16 turns of different energy through just two beamlines located in the RHIC tunnel. This paper presents lattices for these two FFAGs that are optimised for low magnet field and to minimise total synchrotron radiation across the energy range. The higher number of recirculations in the FFAG allows a shorter linac (1.322GeV) to be used, drastically reducing cost, while still achieving a 21.2GeV maximum energy to collide with one of the existing RHIC hadron rings at up to 250GeV. eRHIC uses many cost-saving measures in addition to the FFAG: the linac operates in energy recovery mode, so the beams also decelerate via the same FFAG loops and energy is recovered from the interacted beam. All magnets will constructed from NdFeB permanent magnet material, meaning chillers and large magnet power supplies are not needed. This paper also describes a smaller prototype ERL-FFAG accelerator that will test all of these technologies in combination to reduce technical risk for eRHIC.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY047

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI049

Polarized Proton Beam for eRHIC

2360

H. Huang, F. Méot, V. Ptitsyn, T. Roser
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
RHIC has provided polarized proton collisions from 31 GeV to 255 GeV in past decade. To preserve polarization through numerous depolarizing resonances through the whole accelerator chain, harmonic orbit correction, partial snakes, horizontal tune jump system and full snakes have been used. In addition, close attentions have been paid to betatron tune control, orbit control and beam line alignment. The polarization of 60% at 255 GeV has been delivered to experiments with 1.8×10¹¹ bunch intensity. For the eRHIC era, the beam brightness has to be maintained to reach the desired luminosity. Since we only have one hadron ring in the eRHIC era, existing spin rotator and snakes can be converted to six snake configuration for one hadron ring. With properly arranged six snakes, the polarization can be maintained at 70% at 250 GeV. This paper summarizes the effort and plan to reach high polarization with small emittance for eRHIC.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI049

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI050

Optics Correction for the Multi-pass FFAG ERL Machine eRHIC

2363

C. Liu, S.J. Brooks, V. Litvinenko, M.G. Minty, V. Ptitsyn, D. Trbojevic
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Gradient errors in the multi-pass Fixed Field Alternating Gradient (FFAG) Energy Recovery Linac (ERL) machine, eRHIC, distort the beam orbit and therefore cause emittance increase. The localization and correction of gradient errors are essential for an effective orbit correction and emittance preservation. In this report, the methodology and simulation of optics correction for the multi-pass FFAG ERL machine eRHIC will be presented.
The work was performed under Contract No. DE-AC02-98CH10886
with the U.S. Department of Energy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI050

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI051

Study of Orbit Correction for eRHIC FFAG Design

2366

C. Liu, Y. Hao, V. Litvinenko, F. Méot, M.G. Minty, V. Ptitsyn, D. Trbojevic
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The chromaticities in the eRHIC linear non-scaling Fixed Field Alternating Gradient (FFAG) lattice are very large. Therefore, particles will decohere in phase space given the presence of lattice errors. The decoherence causes a deviation of the orbit response which is the basis for orbit corrections. In this report we will present a study of the linearity of the orbit response in a lattice with large chromaticity, a comparison of the results of orbit corrections for several cases together with a conclusion that correcting the average orbit with a measured orbit response works as good as an orbit correction for on-momentum particles.
The work was performed under Contract No. DE-AC02-98CH10886
with the U.S. Department of Energy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI051

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWI052

End-to-end 9-D⁺SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects

2369

F. Méot, S.J. Brooks, V. Ptitsyn, D. Trbojevic, N. Tsoupas
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The energy-recovery electron beam recirculator, part of the eRHIC electron-ion collider project complex at BNL, is subject to feasibility studies in an FFAG arc based version. We develop here on tracking simulations and their analysis, regarding end-to-end polarized e-bunch transport in presence of synchrotron radiation, magnet alignment and field errors. Simulations include the evolution of energy, orbits, emittances, polarization profiles.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWI052

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)