IPAC2015 - List of Authors (Lee, D.)

Paper	Title	Page
MOPTY069	Control Interface and Functionality of TPS Booster Power Supply	1094
	C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070	Online RadFET Reader for Beam Loss Monitoring System	1097
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY071	FPGA Based Global Orbit Feedback in the Taiwan Light Source	1100
	C.H. Kuo, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee NSRRC, Hsinchu, Taiwan
	The global orbit feedback for the 1.5 GeV electron storage ring of TLS has been operated more than ten years. This system uses general processors to control feedback loop with 1 kHz rate. It is very important for various operation of storage ring now, but some hardware components could have been out of stock in the future. As a prototype, a FPGA based fast global orbit feedback at a 10 kHz data acquisition rate has been developed. A micro-TCA liked platform with FPGA board is used to implement control algorithm and acquire BPM data from Libera Brillance. The correction algorithm is written in VHDL and connected to power supply with AURORA digital links. The system architecture will be discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY071
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072	Beam Loss Study of TLS Using RadFETs	1103
	C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY075	Vibration Measurement of the Magnets in the Storage Ring of TPS	1112
	C.H. Huang, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	Taiwan photon source is a 3rd generation synchrotron light source which is in beam commissioning at NSRRC. Orbit stability within 100 nm range is essential for such a small emittance light source. Technical noise from the vacuum pumps, water flow, etc. will cause the vibration of quadrupoles and deleterious orbit stability. In order to investigate the magnitude of vibration in the magnets of the storage ring, the vibration spectra of the lattice quadruples; the coherence between the magnets, girders and ground will be systematic investigated in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY075
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077	Control Interface of Pulse Magnet Power Supply for TPS Project	1120
	C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin NSRRC, Hsinchu, Taiwan
	The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Control Interface and Functionality of TPS Booster Power Supply

1094

C.Y. Wu, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

The TPS booster is a synchrotron with injection energy at 150 MeV and extraction energy at 3 GeV in 3 Hz. Booster main power supplies consist of one dipole power supply with maximum current 1200 Ampere and four quadrupole family power supplies with maximum current of 120/150 Ampere. The small power supply for booster corrector and sextupole is a low noise switching power supply with ± 10 Ampere current range. The TPS booster control environment is based on EPICS framework to support rich functionalities including power supply control, waveform management, operation supports, and so on. All power supplies support DC mode and 3 Hz ramping mode operation for TPS booster commissioning and operation. Efforts on control interface and functionality for TPS booster power supply will be summarizes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY070

Online RadFET Reader for Beam Loss Monitoring System

1097

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To investigate the beam loss and its distribution during operation of synchrotron light sources at NSSRC, a sixteen-channel readout box is designed and implemented to read the threshold voltage of the RadFETs installed at accelerator tunnel. To simplify the design, the reader plays a role of remote I/O for EPICS IOC. The IOC collects voltage from readers distributed in the accelerator to deduce the integrated dose and dose rate. User interface is shown in the control console for real-time display and the archived data are processed off-line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY070

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY071

FPGA Based Global Orbit Feedback in the Taiwan Light Source

1100

C.H. Kuo, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, D. Lee
NSRRC, Hsinchu, Taiwan

The global orbit feedback for the 1.5 GeV electron storage ring of TLS has been operated more than ten years. This system uses general processors to control feedback loop with 1 kHz rate. It is very important for various operation of storage ring now, but some hardware components could have been out of stock in the future. As a prototype, a FPGA based fast global orbit feedback at a 10 kHz data acquisition rate has been developed. A micro-TCA liked platform with FPGA board is used to implement control algorithm and acquire BPM data from Libera Brillance. The correction algorithm is written in VHDL and connected to power supply with AURORA digital links. The system architecture will be discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY071

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY072

Beam Loss Study of TLS Using RadFETs

1103

C.H. Huang, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, D. Lee, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To realize the beam loss during the operation of Taiwan light source, P-type radiation-sensing field-effect transistors are setup around the storage ring. A sixteen-channel readout box is used to read the threshold voltage of the radiation-sensing field-effect transistors during irradiation. The beam loss distribution and mechanism at the injection period, decay mode and top up injection for routing operation will be studied in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY072

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY075

Vibration Measurement of the Magnets in the Storage Ring of TPS

1112

C.H. Huang, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

Taiwan photon source is a 3rd generation synchrotron light source which is in beam commissioning at NSRRC. Orbit stability within 100 nm range is essential for such a small emittance light source. Technical noise from the vacuum pumps, water flow, etc. will cause the vibration of quadrupoles and deleterious orbit stability. In order to investigate the magnitude of vibration in the magnets of the storage ring, the vibration spectra of the lattice quadruples; the coherence between the magnets, girders and ground will be systematic investigated in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY075

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY077

Control Interface of Pulse Magnet Power Supply for TPS Project

1120

C.Y. Wu, J. Chen, Y.-S. Cheng, C.-S. Fann, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, D. Lee, C.Y. Liao, K.-K. Lin
NSRRC, Hsinchu, Taiwan

The TPS (Taiwan Photon Source) is low emittance 3 GeV synchrotron light source. The design and implementation of a pulse magnet power supply control system for beam injection and extraction were done. The EPICS embedded programmable logic controller (PLC) was applied to control pulse magnet power supply. The system comprises various input/output modules and a CPU module with built-in Ethernet interface. The control information (status of the power supply, ON, OFF, warn up, reset, reading/setting voltage, etc.) can be accessed remotely using EPICS client tools. The TPS timing system provide trigger signals for pulse magnet power supplies. The Ethernet-based oscilloscope is employed to observe current waveform of pulse magnet power supply with EPICS support. This paper describes control interface and operation GUI for the TPS pulse magnet power supply.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY077

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)