| Paper |
Title |
Page |
| THMPL09 |
VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20) |
1291 |
| |
- E.S. Kotov, A.M. Batrakov, G.A. Fatkin, A.V. Pavlenko, K.S. Shtro, M.Yu. Vasilyev
BINP SB RAS, Novosibirsk, Russia
- G.A. Fatkin, E.S. Kotov, A.V. Pavlenko, M.Yu. Vasilyev
NSU, Novosibirsk, Russia
|
|
| |
Waveform monitoring system plays a special role in the control system of powerful pulse installations providing the most complete information about the installation functioning and its parameters. The report describes the family of VME modules used in the waveform monitoring system of a linear induction accelerator LIA-20. In order to organize inter-module synchronization the VME-64 bus extension implemented in the VME64-BINP crates is applied in the waveform digitizers.
|
|
|
Slides THMPL09 [1.653 MB]
|
|
|
Poster THMPL09 [1.777 MB]
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THMPL09
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| THMPL10 |
New VME-Based Hardware for Automation in BINP |
1294 |
| |
- G.A. Fatkin, A.O. Baluev, A.M. Batrakov, E.S. Kotov, Ya.M. Macheret, V.R. Mamkin, A. Panov, A.V. Pavlenko, A.N. Selivanov, M.Yu. Vasilyev
BINP SB RAS, Novosibirsk, Russia
- G.A. Fatkin, E.S. Kotov, A.V. Pavlenko, M.Yu. Vasilyev
NSU, Novosibirsk, Russia
|
|
| |
A new VME-based crate and modules are presented in this work. This hardware is primarily intended for LIA-20 control system, but we also plane to use it for the upgrade of the controls of existing complexes such as: VEPP-2000, VEPP-4, VEPP-5 Preinjector. Modules were designed with an ability to be used planned projects such as Super c-tau factory. A crate is 6U VME64x compatible crate with additional synchronization, daisy-chain lines and 6U RIO-modules. Each crate has a built-in status monitoring over CAN-BUS with independent power supply. A family of VME modules is based on the same design sample and include: digitizers, timing modules, CAN-interface module, interlock module. All modules are cost effective and have TANGO device servers developed for them.
|
|
|
|
Slides THMPL10 [7.378 MB]
|
|
|
|
Poster THMPL10 [5.851 MB]
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THMPL10
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| THPHA052 |
LIA-20 Control System Project |
1485 |
| |
- G.A. Fatkin, A.O. Baluev, A.M. Batrakov, E.A. Bekhtenev, E.S. Kotov, Ya.M. Macheret, V.R. Mamkin, A.V. Ottmar, A. Panov, A.V. Pavlenko, A.N. Selivanov, P.A. Selivanov, A.I. Senchenko, S.S. Serednyakov, K.S. Shtro, S.R. Singatulin
BINP SB RAS, Novosibirsk, Russia
- E.A. Bekhtenev, G.A. Fatkin, E.S. Kotov, A.V. Pavlenko, A.I. Senchenko, S.S. Serednyakov
NSU, Novosibirsk, Russia
|
|
| |
The project of the control system of linear induction accelerator LIA-20 for radiography is presented in this paper. The accelerator is a complex pulsed machine designed to provide a series of three consecutive electron pulses with an energy up to 20 MeV, current 2 kA and lateral beam size less then 1 mm. To allow reliable operation of the whole complex, coordinated functioning of more then 700 devices must be guaranteed in time frames from milliseconds to several nanoseconds. Total number of control channels exceeds 6000. The control system is based on a variety of specially developed VME and CAN modules and crates. Tango program infrastructure is used. The first stage of commissioning will take place in the end of 2017 and will include launching 5 MeV version of the accelerator.
|
|
|
|
Poster THPHA052 [5.186 MB]
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA052
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |