ICALEPCS2017 - List of Authors (Broseta, M.)

Paper	Title	Page
TUAPL04	Em# Electrometer Comes to Light	137
	J.A. Avila-Abellan, M. Broseta, G. Cuní, O. Matilla, M. Rodriguez, A. Ruz, J. Salabert, X. Serra-Gallifa ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain A. Milan-Otero, P. Sjöblom MAX IV Laboratory, Lund University, Lund, Sweden
	Em# project is a collaboration project between MAX IV Laboratory and ALBA Synchrotron to obtain a high performant four-channel electrometer. Besides the objective of accurate current measurements down to the pico-ampere range, the project pursues to establish a reusable instrumentation platform with time stamped data collection able to perform real time calculations for flexible feedback implementations. The platform is based on a FPGA responsible of acquisition and synchronization where a real-time protocol between the modules has been implemented (Harmony) []. The data acquired is transmitted via PCIe to a Single Board Computer with an embedded Linux distribution where high level processing and synchronization with upper levels of Control System is executed. In this proceeding, the reasons that lead to start a complex instrument development instead of using a Commercial On the Shelf (COTS) solution will be discussed. The results of the produced units will be analyzed in terms of accuracy and processing capabilities. Finally, different Em# applications in particle accelerators will be described, further widening the functionality of the current state-of-the-art instrumentation. [] Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between Fpga Cores, these proceedings
	Talk as video stream: https://youtu.be/UkZkXomW0nE
	Slides TUAPL04 [1.849 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUAPL04
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUDPL01	Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems	280
	S. Rubio-Manrique, S. Blanch-Torné, M. Broseta, G. Cuní, D. Fernández-Carreiras, J. Moldes ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain A. Götz ESRF, Grenoble, France
	Synchrotron Light Sources are required to operate on 24/7 schedules, while at the same time must be continuously upgraded to cover scientists needs of improving its efficiency and performance. These operation conditions impose rigid calendars to control system engineers, reducing to few hours per month the maintenance and testing time available. The SimulatorDS project has been developed to cope with these restrictions and enable test-driven development, replicating in a virtual environment the conditions in which a piece of software has to be developed or debugged. This software provides devices and scripts to easily duplicate or prototype the structure and behavior of any Tango Control System, using the Fandango python library* to export the control system status and create simulated devices dynamically. This paper will also present first large scale tests using multiple SimulatorDS instances running on a commercial cloud. * S.Rubio et al., "Dynamic Attributes and other functional flexibilities of PyTango", ICALEPCS'09, Kobe, Japan (2009)
	Talk as video stream: https://youtu.be/YyLu76YV3iQ
	Slides TUDPL01 [2.732 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUDPL01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA173	A Web-Based Report Tool for Tango Control Systems via Websockets	826
	M. Broseta, A. Burgos, G. Cuní, D. Fernández-Carreiras, D. Roldán, S. Rubio-Manrique ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	Beamlines at Synchrotron Light sources operate 24 hours/day requiring Beamline scientists to have tools to monitor the current state of the Beamline without interfering with the measurements being carried out. The previous web report system developed at ALBA was based on cron tasks querying the Tango Control system and generating html files. The new system integrates all those automatic tasks in a Tornado Tango Device letting the users create their own reports without requiring the intervention of the software support groups. This device runs a Tornado web server providing an html5 web interface to create, customize and visualize its reports in real time (via websockets). Originally designed for the vacuum engineers to monitor the vacuum, is actually used by the scientists and engineers involved in the experiment and the different on-call services to remotely check the beamline overall status.
	Poster TUPHA173 [0.867 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA173
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEAPL01	Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores	1012
	M. Broseta, J.A. Avila-Abellan, S. Blanch-Torné, G. Cuní, D. Fernández-Carreiras, O. Matilla, M. Rodriguez, J. Salabert, X. Serra-Gallifa ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	When feedback loops latencies shall be lower than milliseconds range the performance of FPGA-based solutions are unrivaled. One of the main difficulties in these solutions is how to make compatible a full custom digital design with a generic interface and the high-level control software. ALBA simplified the development process of electronic instrumentation with the use of Harmony Bus (HB). Based on the Self-Describing Bus, developed at CERN/GSI, it creates a bus framework where different modules share timestamped data and generate events. This solution enables the high-level control software in a Single Board Computer or PC, to easily configure the expected functionally in the FPGA and manage the real-time data acquired. This framework has been already used in the new Em# electrometer, produced within a collaboration between ALBA and MAXIV, that is currently working in both synchrotrons. Future plans include extending the FPGA cores library, high-level functions and the development of a new auto-generation tool able to dynamically create the FPGA configuration file simplifying the development process of new functionalities. 'A Generic Fpga Based Solution for Flexible Feedback Systems', PCaPAC16, paper FRFMPLCO06 ** 'Em# Electrometer Comes To Light', ICALEPS 2017 Abstract Submitted
	Talk as video stream: https://youtu.be/B3gt4Imn2Qs
	Slides WEAPL01 [3.792 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-WEAPL01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA169	Building S.C.A.D.A. Systems in Scientific Installations with Sardana and Taurus	1820
	D. Fernández-Carreiras, J. Andreu, F. Becheri, S. Blanch-Torné, M. Broseta, G. Cuní, C. Falcon-Torres, R. Homs-Puron, G. Jover-Mañas, J. Klora, J. Moldes, C. Pascual-Izarra, S. Pusó Gallart, Z. Reszela, D. Roldán, M. Rosanes Siscart, A. Rubio, S. Rubio-Manrique, J. Villanueva ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain T.M. Coutinho, A. Homs, E.T. Taurel ESRF, Grenoble, France Ł.J. Dudek, P.P. Goryl, Ł. Żytniak Solaris, Kraków, Poland V.H. Hardion, A.M. Milan, D.P. Spruce MAX IV Laboratory, Lund University, Lund, Sweden T. Kracht, M.T. Nunez Pardo de Vera DESY, Hamburg, Germany
	Sardana and Taurus form a python software suite for Supervision, Control and Data Acquisition (SCADA) optimized for scientific installations. Sardana and Taurus are open source and deliver a substantial reduction in both time and cost associated to the design, development and support of control and data acquisition systems. The project was initially developed at ALBA and later evolved to an international collaboration driven by a community of users and developers from ALBA, DESY, MAXIV and Solaris as well as other institutes and private companies. The advantages of Sardana for its adoption by other institutes are: free and open source code, comprehensive workflow for enhancement proposals, a powerful environment for building and executing macros, optimized access to the hardware and a generic Graphical User Interface (Taurus) that can be customized for every application. Sardana and Taurus are currently based on the Tango Control System framework but also capable to inter-operate to some extend with other control systems like EPICS. The software suite scales from small laboratories to large scientific institutions, allowing users to use only some parts or employ it as a whole.
	Poster THPHA169 [2.746 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA169
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Em# Electrometer Comes to Light

137

J.A. Avila-Abellan, M. Broseta, G. Cuní, O. Matilla, M. Rodriguez, A. Ruz, J. Salabert, X. Serra-Gallifa
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
A. Milan-Otero, P. Sjöblom
MAX IV Laboratory, Lund University, Lund, Sweden

Em# project is a collaboration project between MAX IV Laboratory and ALBA Synchrotron to obtain a high performant four-channel electrometer. Besides the objective of accurate current measurements down to the pico-ampere range, the project pursues to establish a reusable instrumentation platform with time stamped data collection able to perform real time calculations for flexible feedback implementations. The platform is based on a FPGA responsible of acquisition and synchronization where a real-time protocol between the modules has been implemented (Harmony) [*]. The data acquired is transmitted via PCIe to a Single Board Computer with an embedded Linux distribution where high level processing and synchronization with upper levels of Control System is executed. In this proceeding, the reasons that lead to start a complex instrument development instead of using a Commercial On the Shelf (COTS) solution will be discussed. The results of the produced units will be analyzed in terms of accuracy and processing capabilities. Finally, different Em# applications in particle accelerators will be described, further widening the functionality of the current state-of-the-art instrumentation.
[*] Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between Fpga Cores, these proceedings

Talk as video stream: https://youtu.be/UkZkXomW0nE

Slides TUAPL04 [1.849 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUAPL04

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUDPL01

Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems

280

S. Rubio-Manrique, S. Blanch-Torné, M. Broseta, G. Cuní, D. Fernández-Carreiras, J. Moldes
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
A. Götz
ESRF, Grenoble, France

Synchrotron Light Sources are required to operate on 24/7 schedules, while at the same time must be continuously upgraded to cover scientists needs of improving its efficiency and performance. These operation conditions impose rigid calendars to control system engineers, reducing to few hours per month the maintenance and testing time available. The SimulatorDS project has been developed to cope with these restrictions and enable test-driven development, replicating in a virtual environment the conditions in which a piece of software has to be developed or debugged. This software provides devices and scripts to easily duplicate or prototype the structure and behavior of any Tango Control System, using the Fandango python library* to export the control system status and create simulated devices dynamically. This paper will also present first large scale tests using multiple SimulatorDS instances running on a commercial cloud.
* S.Rubio et al., "Dynamic Attributes and other
functional flexibilities of PyTango", ICALEPCS'09,
Kobe, Japan (2009)

Talk as video stream: https://youtu.be/YyLu76YV3iQ

Slides TUDPL01 [2.732 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUDPL01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA173

A Web-Based Report Tool for Tango Control Systems via Websockets

826

M. Broseta, A. Burgos, G. Cuní, D. Fernández-Carreiras, D. Roldán, S. Rubio-Manrique
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

Beamlines at Synchrotron Light sources operate 24 hours/day requiring Beamline scientists to have tools to monitor the current state of the Beamline without interfering with the measurements being carried out. The previous web report system developed at ALBA was based on cron tasks querying the Tango Control system and generating html files. The new system integrates all those automatic tasks in a Tornado Tango Device letting the users create their own reports without requiring the intervention of the software support groups. This device runs a Tornado web server providing an html5 web interface to create, customize and visualize its reports in real time (via websockets). Originally designed for the vacuum engineers to monitor the vacuum, is actually used by the scientists and engineers involved in the experiment and the different on-call services to remotely check the beamline overall status.

Poster TUPHA173 [0.867 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA173

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEAPL01

Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores

1012

M. Broseta, J.A. Avila-Abellan, S. Blanch-Torné, G. Cuní, D. Fernández-Carreiras, O. Matilla, M. Rodriguez, J. Salabert, X. Serra-Gallifa
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

When feedback loops latencies shall be lower than milliseconds range the performance of FPGA-based solutions are unrivaled. One of the main difficulties in these solutions is how to make compatible a full custom digital design with a generic interface and the high-level control software. ALBA simplified the development process of electronic instrumentation with the use of Harmony Bus (HB)*. Based on the Self-Describing Bus, developed at CERN/GSI, it creates a bus framework where different modules share timestamped data and generate events. This solution enables the high-level control software in a Single Board Computer or PC, to easily configure the expected functionally in the FPGA and manage the real-time data acquired. This framework has been already used in the new Em# electrometer**, produced within a collaboration between ALBA and MAXIV, that is currently working in both synchrotrons. Future plans include extending the FPGA cores library, high-level functions and the development of a new auto-generation tool able to dynamically create the FPGA configuration file simplifying the development process of new functionalities.
* 'A Generic Fpga Based Solution for Flexible Feedback Systems', PCaPAC16, paper FRFMPLCO06
** 'Em# Electrometer Comes To Light', ICALEPS 2017 Abstract Submitted

Talk as video stream: https://youtu.be/B3gt4Imn2Qs

Slides WEAPL01 [3.792 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-WEAPL01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA169

Building S.C.A.D.A. Systems in Scientific Installations with Sardana and Taurus

1820

D. Fernández-Carreiras, J. Andreu, F. Becheri, S. Blanch-Torné, M. Broseta, G. Cuní, C. Falcon-Torres, R. Homs-Puron, G. Jover-Mañas, J. Klora, J. Moldes, C. Pascual-Izarra, S. Pusó Gallart, Z. Reszela, D. Roldán, M. Rosanes Siscart, A. Rubio, S. Rubio-Manrique, J. Villanueva
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
T.M. Coutinho, A. Homs, E.T. Taurel
ESRF, Grenoble, France
Ł.J. Dudek, P.P. Goryl, Ł. Żytniak
Solaris, Kraków, Poland
V.H. Hardion, A.M. Milan, D.P. Spruce
MAX IV Laboratory, Lund University, Lund, Sweden
T. Kracht, M.T. Nunez Pardo de Vera
DESY, Hamburg, Germany

Sardana and Taurus form a python software suite for Supervision, Control and Data Acquisition (SCADA) optimized for scientific installations. Sardana and Taurus are open source and deliver a substantial reduction in both time and cost associated to the design, development and support of control and data acquisition systems. The project was initially developed at ALBA and later evolved to an international collaboration driven by a community of users and developers from ALBA, DESY, MAXIV and Solaris as well as other institutes and private companies. The advantages of Sardana for its adoption by other institutes are: free and open source code, comprehensive workflow for enhancement proposals, a powerful environment for building and executing macros, optimized access to the hardware and a generic Graphical User Interface (Taurus) that can be customized for every application. Sardana and Taurus are currently based on the Tango Control System framework but also capable to inter-operate to some extend with other control systems like EPICS. The software suite scales from small laboratories to large scientific institutions, allowing users to use only some parts or employ it as a whole.

Poster THPHA169 [2.746 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA169

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)