SRF2021 - List of Keywords (quadrupole)

Paper	Title	Other Keywords	Page
SUPCAV013	Multipacting Analysis of the Quadripolar Resonator (QPR) at HZB	multipactoring, electron, simulation, operation	42
	S. Bira, D. Longuevergne Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France Y. Kalboussi CEA-IRFU, Gif-sur-Yvette, France S. Keckert, J. Knobloch, O. Kugeler HZB, Berlin, Germany Th. Proslier CEA-DRF-IRFU, France
	Multipacting (MP) is a resonating electron discharge, often plaguing radio-frequency (RF) structures, produced by the synchronization of emitted electrons with the RF fields and the electron multiplication at the impact point with the surface structure. The electron multiplication can take place only if the secondary emission yield (SEY, i.e. the number of electrons emitted due to the impact of one incoming electron), , is higher than 1. The SEY value depends strongly on the material and the surface contamination. Multipacting simulations are crucial in high-frenquency (HF) vacuum structures to localize and potentially improve the geometry. In this work, multipacting simulations were carried out on the geometry of the Quadrupole Resonator (QPR) in operation at HZB using the Spark 3D module in Microwave Studio suite (CST). These simulations helped to understand a particular behavior observed during the QPR tests, and furthermore made it possible to suggest enhancement ways in order to limit this phenomenon and facilitate its operation.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV013
About •	Received ※ 09 July 2021 — Revised ※ 09 July 2021 — Accepted ※ 09 April 2022 — Issue date ※ 07 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPFDV006	Investigation of SIS Multilayer Films at HZB	SRF, cavity, superconductivity, radio-frequency	72
	D.B. Tikhonov, S. Keckert, J. Knobloch, O. Kugeler HZB, Berlin, Germany E. Chyhyrynets, C. Pira INFN/LNL, Legnaro (PD), Italy J. Knobloch University of Siegen, Siegen, Germany S.B. Leith, M. Vogel University Siegen, Siegen, Germany
	Funding: The manufacture of the QPR samples received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 The systematic study of multilayer SIS films (Superconductor-Insulator-Superconductor) is being conducted in Helmholtz-Zentrum Berlin. Such films theoretically should boost the performance of superconducting cavities, and reduce some problems related to bulk Nb such as magnetic flux trapping. Up to now such films have been presented in theory, but the RF performance of those structures have not been widely studied. In this contribution we present the results of the latest tests of AlN-NbN films, deposited on micrometers-thick Nb layers on copper. It has, also, been shown previously at HZB that such SIS films may show some unexpected behavior in surface resistance versus temperature parameter space. In this contribution we continue to investigate those effects with the variation of different parameters of films (such as insulator thickness) and production recipes.
	Poster SUPFDV006 [2.234 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPFDV006
About •	Received ※ 21 June 2021 — Revised ※ 09 July 2021 — Accepted ※ 12 August 2021 — Issue date ※ 21 December 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOFDV07	Sample Test Systems for Next-Gen SRF Surfaces	cavity, SRF, niobium, operation	357
	T.E. Oseroff, M. Liepe, Z. Sun Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	With the increasing worldwide focus on the development of new surfaces for SRF cavities, exploring alternative materials and multilayer structures, test systems that allow measuring the RF performance of simple sample geometries (e.g., flat samples) become increasingly essential. These systems provide RF performance results that are needed to guide the development of these surfaces. This contribution gives an overview of sample test systems currently available, including the improved Cornell sample host cavity. Recent advances in this important technology, performance specifications, and current limitations are discussed. In addition, an overview is given of interesting recent RF performance results on samples coated with non-niobium bulk and multilayer films.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUOFDV07
About •	Received ※ 08 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 05 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPFDV001	Status of the New Quadrupole Resonator for SRF R&D	SRF, cavity, operation, simulation	751
	R. Monroy-Villa, W. Hillert, M. Wenskat University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany S. Gorgi Zadeh, P. Putek Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany M. Lemke, R. Monroy-Villa, D. Reschke, M. Röhling, J.H. Thie DESY, Hamburg, Germany
	A basic understanding of the properties of SRF samples under surface treatments would aid in the development of consistent theories. To study the RF properties of such samples under realistic superconducting-cavity-like conditions, a test device called Quadrupole Resonator (QPR) was fabricated. In this publication we report the status of the QPR at Universität Hamburg in collaboration with DESY. Our device is based on the QPRs operated at CERN and at HZB, and its design will allow for testing samples at temperatures between 2 K and 8 K, under magnetic fields up to 120 mT and with operating frequencies of 433 MHz, 866 MHz and 1300 MHz. Fabrication tolerance studies on the electromagnetic field distributions and simulations of the static detuning of the device, together with the commissioning report and the ongoing surface treatment, will be presented.
	Poster THPFDV001 [1.074 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPFDV001
About •	Received ※ 27 June 2021 — Revised ※ 23 August 2021 — Accepted ※ 23 August 2021 — Issue date ※ 29 April 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

SUPCAV013

Multipacting Analysis of the Quadripolar Resonator (QPR) at HZB

multipactoring, electron, simulation, operation

42

S. Bira, D. Longuevergne
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
Y. Kalboussi
CEA-IRFU, Gif-sur-Yvette, France
S. Keckert, J. Knobloch, O. Kugeler
HZB, Berlin, Germany
Th. Proslier
CEA-DRF-IRFU, France

Multipacting (MP) is a resonating electron discharge, often plaguing radio-frequency (RF) structures, produced by the synchronization of emitted electrons with the RF fields and the electron multiplication at the impact point with the surface structure. The electron multiplication can take place only if the secondary emission yield (SEY, i.e. the number of electrons emitted due to the impact of one incoming electron), , is higher than 1. The SEY value depends strongly on the material and the surface contamination. Multipacting simulations are crucial in high-frenquency (HF) vacuum structures to localize and potentially improve the geometry. In this work, multipacting simulations were carried out on the geometry of the Quadrupole Resonator (QPR) in operation at HZB using the Spark 3D module in Microwave Studio suite (CST). These simulations helped to understand a particular behavior observed during the QPR tests, and furthermore made it possible to suggest enhancement ways in order to limit this phenomenon and facilitate its operation.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV013

About •

Received ※ 09 July 2021 — Revised ※ 09 July 2021 — Accepted ※ 09 April 2022 — Issue date ※ 07 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPFDV006

Investigation of SIS Multilayer Films at HZB

SRF, cavity, superconductivity, radio-frequency

72

D.B. Tikhonov, S. Keckert, J. Knobloch, O. Kugeler
HZB, Berlin, Germany
E. Chyhyrynets, C. Pira
INFN/LNL, Legnaro (PD), Italy
J. Knobloch
University of Siegen, Siegen, Germany
S.B. Leith, M. Vogel
University Siegen, Siegen, Germany

Funding: The manufacture of the QPR samples received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871
The systematic study of multilayer SIS films (Superconductor-Insulator-Superconductor) is being conducted in Helmholtz-Zentrum Berlin. Such films theoretically should boost the performance of superconducting cavities, and reduce some problems related to bulk Nb such as magnetic flux trapping. Up to now such films have been presented in theory, but the RF performance of those structures have not been widely studied. In this contribution we present the results of the latest tests of AlN-NbN films, deposited on micrometers-thick Nb layers on copper. It has, also, been shown previously at HZB that such SIS films may show some unexpected behavior in surface resistance versus temperature parameter space. In this contribution we continue to investigate those effects with the variation of different parameters of films (such as insulator thickness) and production recipes.

Poster SUPFDV006 [2.234 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPFDV006

About •

Received ※ 21 June 2021 — Revised ※ 09 July 2021 — Accepted ※ 12 August 2021 — Issue date ※ 21 December 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOFDV07

Sample Test Systems for Next-Gen SRF Surfaces

cavity, SRF, niobium, operation

357

T.E. Oseroff, M. Liepe, Z. Sun
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

With the increasing worldwide focus on the development of new surfaces for SRF cavities, exploring alternative materials and multilayer structures, test systems that allow measuring the RF performance of simple sample geometries (e.g., flat samples) become increasingly essential. These systems provide RF performance results that are needed to guide the development of these surfaces. This contribution gives an overview of sample test systems currently available, including the improved Cornell sample host cavity. Recent advances in this important technology, performance specifications, and current limitations are discussed. In addition, an overview is given of interesting recent RF performance results on samples coated with non-niobium bulk and multilayer films.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUOFDV07

About •

Received ※ 08 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 05 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPFDV001

Status of the New Quadrupole Resonator for SRF R&D

SRF, cavity, operation, simulation

751

R. Monroy-Villa, W. Hillert, M. Wenskat
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
S. Gorgi Zadeh, P. Putek
Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany
M. Lemke, R. Monroy-Villa, D. Reschke, M. Röhling, J.H. Thie
DESY, Hamburg, Germany

A basic understanding of the properties of SRF samples under surface treatments would aid in the development of consistent theories. To study the RF properties of such samples under realistic superconducting-cavity-like conditions, a test device called Quadrupole Resonator (QPR) was fabricated. In this publication we report the status of the QPR at Universität Hamburg in collaboration with DESY. Our device is based on the QPRs operated at CERN and at HZB, and its design will allow for testing samples at temperatures between 2 K and 8 K, under magnetic fields up to 120 mT and with operating frequencies of 433 MHz, 866 MHz and 1300 MHz. Fabrication tolerance studies on the electromagnetic field distributions and simulations of the static detuning of the device, together with the commissioning report and the ongoing surface treatment, will be presented.

Poster THPFDV001 [1.074 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPFDV001

About •

Received ※ 27 June 2021 — Revised ※ 23 August 2021 — Accepted ※ 23 August 2021 — Issue date ※ 29 April 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)