IKP, Mainz, Germany
HIM, Mainz, Germany
At Johannes Gutenberg-Universität Mainz, the Institute for Nuclear Physics is currently building the multiturn ERL 'Mainz Energy-Recovering Superconducting Accelerator' MESA. The §I{1.3}{\giga\hertz} cryomodules are based on the ELBE modules at Helmholtz Center Dresden-Rossendorf (HZDR) but are modified to suit the high current, energy recovering purposes of MESA. With two 9-cell TESLA cavities each, they shall provide §I{50}{\mega\electronvolt} energy gain per turn. The design and fabrication was done by Research Instruments GmbH, Bergisch Gladbach, Germany. The current status of the cryomodules, the test set up at the Helmholtz-Institute Mainz, the cavity properties and their tests will be discussed.
TU Darmstadt, Darmstadt, Germany
IKP, Mainz, Germany
Since 2005 the Institute for Nuclear Physics in Darmstadt operates a high temperature UHV furnace for temperatures of up to 1750°C. It has been used several times for hydrogen bake-out of the SRF cavities of the S-DALINAC with proven success. In 2013, studies at FNAL have shown that cavities treated with nitrogen reached an up to four times higher q-factor*. The cavities are exposed to N2 at 850°C at the end of the H2 bake-out. A thin layer of normalconducting hexagonal niobium nitride (NbN) forms at the surface which is removed by electropolishing while the higher quality factors are attributed to the N2 diffusion into the bulk Nb. At temperatures from 1300°C to 1700°C a thin layer of the superconducting cubic phase of NbN can be observed, e.g. delta-phase NbN**, which has a higher critical field and higher critical temperature and thus is very intereresting for applications for SRF cavities***. The UHV furnace has been prepared for future treatments of Nb samples and cavities in a N2 atmosphere at high temperatures for research on cubic NbN. The material properties of the samples will be analyzed at the ATFT group at the Department for Material Sciences of TU Darmstadt.
*Grasselino et al., Superconducting Science and Technology, 2013
**Hennessey et al., Oxidation of Metals, 1992
***Martienssen et al., Springer Handbook of Condensed Matter and Materials Data, 2005
