UMD, College Park, Maryland
Beam based alignment and control has been a critical issue for many accelerators. In this paper, we've developed a new approach that can correct the beam orbit using a systematic quad-scan method, where there is an insufficient number of beam position monitors. In this approach, we've proposed a calibrated response matrix. This matrix takes consideration of the different sensitivities of different quadrupoles in the lattice. With the calibrated response matrix, we can greatly enhance our ability to control the beam centroid motion and reduce the control effort.
UMD, College Park, Maryland
NRL, Washington, DC
Photocathodes for high power free electron lasers face significant engineering and physics challenges in the quest for efficient, robust, long-lived, prompt laser-switched operation. The most efficient semiconductor photocathodes, notably those responsive to visible wavelengths, suffer from poor lifetime due to surface layer degradation, contamination, and desorption. Using a novel dispenser photocathode design, rejuvenation of cesiated surface layers in situ is investigated for semiconductor coatings building on previous results for cesiated metals. Cesium from a sub-surface reservoir diffuses to the surface through a microscopically porous, sintered tungsten matrix to repair the degraded surface layer. The goal of this research is to engineer and demonstrate efficient, robust, long-lived regenerable photocathodes in support of predictive photocathode modeling efforts and suitable for photoinjection applications.
NRL, Washington, DC
UMD, College Park, Maryland
LANL, Los Alamos, New Mexico
SAIC, Burlington, Massachusetts
A recently developed model* of the emittance and brightness of a photocathode based on the evaluation of the moments of the electron emission distribution function admits an analytical solution for the zero-field and zero-temperature asymptotic model. Here, the model has been extended to account for the critical modifications of temperature and field dependence, which are tied to material issues with the cathode. Temperature impacts the nature of scattering within the photoemitter material and therefore affects quantum efficiency significantly. Field changes the emission probability at the surface barrier, and is particularly important for low work function coatings, as occur for the cesiated surfaces characteristic of our controlled porosity dispenser photocathodes. Extensions of the theoretical models shall be given, followed by an analysis of their comparison with numerical simulations of the intrinsic emittance and brightness of a photocathode. The methodology is designed to facilitate the development of photoemission models into comprehensive particle-in-cell (PIC) codes to address issues otherwise not readily treated, e.g., variation in surface coverage and topology.
* K. L. Jensen, P. G. O'Shea, D. W. Feldman, and N. A. Moody, Applied Physics Letters 89, 224103 (2006).
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a low energy, high current recirculator for beam physics research. The electron beam current is adjustable from 0.7 mA, an emittance dominated beam, to 100 mA, a strongly space charge dominated beam. UMER is addressing issues in beam physics relevant to many applications that require intense beams of high quality such as advanced concept accelerators, free electron lasers, spallation neutron sources, and future heavy-ion drivers for inertial fusion. The primary focus of this presentation is experimental results and improvements in multi-turn operation of the electron ring. Transport of a low current beam over 100 turns (3600 full lattice periods) has been achieved. Results of high current, space charge dominated multi-turn transport will also be presented.
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a low energy, high current recirculator for beam physics research. The electron storage ring has been closed and recent operations have been focused on achieving multi-turn transport. An entire suite of terminal diagnostics is available for time-resolved phase space measurements of the beam. These diagnostics have been mounted and tested at several points on the ring before it was closed. UMER utilizes a unique injection scheme which uses the fringe fields of an offset quadrupole to assist a pulsed dipole in bending the beam into the ring. Similar concepts, along with more traditional electrostatic methods, are being considered for beam extraction. This presentation will focus on the recent efforts to design and deploy these major subsystems required for beam extraction.
UMD, College Park, Maryland
A common challenge for accelerator systems is to maintain beam quality and brightness over the usually long distance from the source to the target. In order to do so, knowledge of the beam distribution in both configuration and velocity space along the beam line is needed. However, measurement of the velocity distribution can be difficult, especially for beams with strong space charge. Here we present a simple and portable tomographic method to map the beam phase space, which can be used in the majority of accelerators. The tomographic reconstruction process has first been compared with results from simulations using the particle-in-cell code WARP. Results show excellent agreement even for beams with extreme space charge and exotic distributions. Our diagnostic has also been successfully demonstrated experimentally on the University of Maryland Electron Ring, a compact ring designed to study the transverse dynamics of beams in both emittance and space charge dominated regimes. Special emphasis is given to intense beams where our phase space tomography diagnostic is used to shed light on the consequences of the space charge forces on the transport of these beams.
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a scaled storage ring using low-energy electrons to inexpensively model beams with high-space-charge. With the ability to inject such beams comes the problem of longitudinal end erosion of both the head and tail. It is important therefore to apply suitably designed longitudinal focusing forces to confine the beam and prevent it from its normal expansion. This paper presents the design and prototyping of an induction cell for this purpose. Successful operation of the induction cell would push the achievable number of turns and also enable us to perform studies of the longitudinal physics of such highly space-charge dominated beams. The pulsed voltage requirements for such a system on UMER would require ear-fields that switch 3kV in about 8ns or so for the most intense flat-top rectangular beam injected into the ring. This places a considerable challenge on the electronics used to deliver ideal waveforms with a compact module. Alternate waveforms are also being explored for other various injected beam shapes into UMER.
UMD, College Park, Maryland
Jefferson Lab, Newport News, Virginia
Optical Transition Radiation Interferometry (OTRI) has proven to be effective tool for measuring rms beam divergence. We present rms emittance measurement results of the 115 MeV energy recovery linac at the Thomas Jefferson National Laboratories Free electron Laser using OTRI. OTRI data from both near field beam images and far field angular distribution images give evidence of two spatial and angular distributions within the beam. Using the unique features of OTRI we segregate the two distributions of the beam and estimate separate rms emittance values for each component.
UMD, College Park, Maryland
Circular accelerators and storage rings have traditionally been designed with limited intensity in order to avoid resonances and instabilities. The possibility of operating a ring beyond the Laslett tune shift limit has been suggested but little tested, apart from a pioneering experiment by Maschke at the BNL AGS in the early 1980s. We have recently circulated the highest-space-charge beam in a ring to date in the University of Maryland Electron Ring (UMER), achieving a breakthrough both in the number of turns and in the amount of current propagated. At undepressed tunes of up to 7.6, the space charge in UMER is sufficient to depress the tune by nearly a factor of 2, resulting in tune shifts up to 3.6. This makes the UMER beam the most intense beam that has been propagated to date in a circular lattice. This is an exciting and promising result for future circular accelerators, and the UMER beam can now be used as a platform to study intense space charge dynamics in rings.
CUNY, Bayside, New York
UMD, College Park, Maryland
(*) Simulation of Longitudinally Modulated Electron Beams. C. P. Neuman and P. G. O'Shea. In 2006 Advanced Accelerator Concepts Workshop, AIP Conference Proceedings, 877, 621-627. Melville, AIP (2006).
CUNY, Bayside, New York
UMD, College Park, Maryland
(*) Simulation of Longitudinally Modulated Electron Beams. C. P. Neuman and P. G. O'Shea. In 2006 Advanced Accelerator Concepts Workshop, AIP Conference Proceedings 877, edited by M. Conde and C. Eyberger, 621-627. Melville, NY, AIP (2006).
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is designed for the transport of low energy (10 keV), high current (100 mA) electrons in a 72-magnetic-quadrupole lattice over an 11.5 m circumference. With these parameters, and a typical single-particle phase advance per period of 76 deg., space charge is extreme. However, high current is not necessary for establishing space charge dominated transport in UMER. In fact, low current (0.6 mA) beam transport in combination with longer full-lattice periods can yield strong space charge conditions. All 72 quadrupoles are needed, though, to yield beams with relatively small cross sections, as required for emittance-dominated transport. We present results of calculations and experiments that demonstrate the low-current, high space charge regime in UMER. We also discuss the use of Collins-type insertions for matching into the ring lattice.
UMD, College Park, Maryland
LLNL, Livermore, California
LBNL, Berkeley, California
One of the areas fundamental beam physics that serve as the rationale for recent research on UMER is the study of generation and evolution of beam halos. This physics can be accessed on a scaled basis in UMER at a small fraction of the cost of similar experiments on a much larger machine. Recent experiments and simulations have identified imperfections in the source geometry, particularly in the region near the emitter edge, as a potentially significant source of halo particles. The edge-generated halo particles, both in the experiments and the simulations are found to pass through the center of the beam in the vicinity of the anode plane. Understanding the detailed evolution of these particle orbits is therefore important to designing any aperture to remove the beam halo. Both experimental data and simulations will be presented to illustrate the details of this mechanism for halo formation.
UMD, College Park, Maryland
This is a numerical study of the effects of skew quadrupoles on the beam used in University of Maryland Electron Ring (UMER). As this beam is space-charge dominated, we expect new phenomena to be present compared to the emittance-dominated case. In our studies we find that skew quadrupoles can severely affect the halo of the beam and cause emittance growth, even in the first turn of the beam. For our simulations we used the WARP particle-in-cell code and we compared the results with the experimental study of skew quadrupole effects (to be reported separately).
UMD, College Park, Maryland
The University of Maryland Electron Ring (UMER) is a scaled model to investigate the transverse and longitudinal physics of space charge dominated beams. It uses a 10-keV electron beam along with other scaled beam parameters that model the larger machines but at a lower cost. Understanding collective behavior of intense, charged particle beams due to their space charge effects is crucial for advanced accelerator research and applications. This paper presents the experimental study of longitudinal dynamics of an initial density modulation on a spacecharge dominated beam. A novel experimental technique of producing a perturbation using a laser is discussed. Using a laser to produce a perturbation provides the ability to launch a pure density modulation and to have better control over the amount of perturbation introduced. Collective effects like space charge waves and its propagation over long distances in a quadrupole channel are studied. One dimensional cold fluid model is used for theoretical analysis and simulations are carried out in WARP-RZ.
UMD, College Park, Maryland
Longitudinal perturbations can be generated in the space-charge dominated regimes in which most beams of interest are born. To study the modification of transverse beam distributions by longitudinal beam dynamics, we have conducted experimental studies using low energy electron beams by taking time resolved images of a beam with longitudinal density perturbations. Two different diagnostics are used: optical transition radiation (OTR) produced from an intercepting silicon based aluminum screen and a fast (<5ns decay time) phosphor screen. It is found that the beam is significantly affected by the perturbation. However the OTR signal is very weak and requires over 45 minutes of frame integration. The fast phosphor screen has much better sensitivity (~1'000 times enhancement). In this paper, we also report on the time resolved measurement of a parabolic beam, showing interesting correlations between transverse and longitudinal distributions of the beam.
LLNL, Livermore, California
UMD, College Park, Maryland
This paper describes the longitudinal expansion of a 10 keV, 100 mA electron beam in the University of Maryland Electron Ring. The expansion of the beam tail was found to be sensitive to the choice of transverse focusing settings due to the presence of an abnormality in the beam current profile. Expansion of the beam head, where no abnormality was observed, is in good agreement with the one-dimensional cold fluid model.
UMD, College Park, Maryland
We present strong evidence of the observation of optical transition radiation (OTR) from aluminized silicon targets intercepting the UMER 10 keV, 100 ns pulsed electron beam, using fast (300ps and 1ns rise time) photomultiplier tubes. An intensified gated (3ns-1ms) CCD camera is used to image the beam using OTR and to study its time evolution throughout the beam pulse. A comparison of wave forms and time resolved OTR images is presented along with time integrated images obtained with phosphor screens for different initial conditions, i.e. beam currents and gun bias voltages.
correspondance email: rfiorito@umd.edu
UMD, College Park, Maryland
ANL, Argonne, Illinois
We have developed a new optical diffraction radiation (ODR) - dielectric foil radiation interferometer to measure the divergence of the low energy (8 - 14 MeV) ANL - Advanced Wakefield Accelerator electron beam. The interferometer employs an electro-formed micromesh first foil, which overcomes the inherent scattering limitation in the solid first foil of a conventional OTR interferometer, and an optically transparent second foil. The interference of forward directed ODR from the mesh and optical radiation from the dielectric foil is observed in transmission. This geometry allows a small gap between the foils (1 - 2 mm), which is required to observe fringes from two foils at low beam energies. Our measurements indicate that a single Gaussian distribution is sufficient to fit the data.
correspondance email: shkvar@umd.edu