A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Aleksandrov, A.V.

Paper Title Page
TPPT039 Installation and Testing for Commissioning of Normal Conducting RF Linac Segment in the SNS 2571
 
  • Y.W. Kang, A.V. Aleksandrov, D.E. Anderson, M.M. Champion, M. Champion, M.T. Crofford, C. Deibele, G.W. Dodson, R.E. Fuja, P.E. Gibson, P.A. Gurd, T.W. Hardek, G.A. Johnson, P. Ladd, H. Ma, M.P. McCarthy, M.F. Piller, J.Y. Tang, A.V. Vassioutchenko, D.C. Williams
    ORNL, Oak Ridge, Tennessee
  • J.A. Billen, J.T. Bradley, D. Rees, W. Roybal, J. Stovall, K.A. Young, L.M. Young
    LANL, Los Alamos, New Mexico
 
  The Spallation Neutron Source (SNS) linac employs both normal conducting and superconducting linac cavities that will inject a 1.0 GeV proton beam into its accumulator ring. The normal conducting segment of this linac accelerates the beam to 185 MeV and employs one RFQ and six DTL cavities powered by seven 2.5 MW, 402.5 MHz klystrons and four CCL modules powered by four 5.0 MW, 805 MHz klystrons. Installation and RF conditioning of the RF equipment for normal conducting linac segment have been completed at ORNL with the support of LANL experts. After conditioning the accelerating structures, the linac has been successfully commissioned with beam. This paper reviews the experience in installation, RF conditioning, and commissioning of the normal conducting linac accelerating structures and RF subsystems. Checkout and operation of the RF systems and structures including conditioning procedure establishment and test results compared to the RF design specifications will be discussed.

SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

 
WPAE038 Resonance Control Cooling System Performance and Developments 2541
 
  • P.E. Gibson, A.V. Aleksandrov, M.M. Champion, G.W. Dodson, J.P. Schubert, J.Y. Tang
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

The Spallation Neutron Source (SNS) is an accelerator-based neutron source being built at Oak Ridge National Laboratory. The warm linac portion, designed by Los Alamos, has been installed and commissioned. The warm linac is comprised of six Drift Tube Linac (DTL) tanks and four Coupled Cavity Linac (CCL) modules. For commissioning purposes the accelerating systems have been operated at less than the design 6% duty factor. During lower power operation there is less RF cavity heating. This decrease in heat load causes operational stability issues for the associated Resonance Control Cooling Systems (RCCSs) which were designed for full duty factor operation. To understand this effect operational results have been analyzed and tests have been performed. External system factors have been explored and the resulting impacts defined. Dynamic modeling of the systems has been done via a collaboration with the Institute for Nuclear Research (INR), Moscow, Russia. New RCCS operation code has been implemented. Increases in system performance achieved and solutions employed will be presented.

 
RPAT039 Feasibility Study of Using an Electron Beam for Profile Measurements in the SNS Accumulator Ring 2586
 
  • A.V. Aleksandrov, S. Assadi, S.M. Cousineau, V.V. Danilov, S. Henderson, M.A. Plum
    ORNL, Oak Ridge, Tennessee
  • P.V. Logatchev, A.A. Starostenko
    BINP SB RAS, Novosibirsk
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.

The design goal for the SNS ring is to accumulate 2·1014 protons per 1ms pulse at a 60Hz repetition rate. Achieving the design beam intensity with acceptable losses is a challenging task, which could be tackled more easily if reliable measurements of the beam profile in the ring are available. The high power density of the beam precludes the use of conventional wire scanners or harps and therefore non-interceptive types of profiles measurements are required. The electron beam probe method was suggested for measuring profiles in high power beams. In this method, deflection of a low energy electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. We studied the feasibility of using the electron beam probe for the SNS accumulator ring using computer simulations of the diagnostic setup. A realistic electron gun model and realistic proton beam distributions were used in the simulations. Several profile calculation techniques were explored and the results are reported in this paper.

 
ROPC001 SNS Warm Linac Commissioning Results 97
 
  • A.V. Aleksandrov
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos, and Oak Ridge.

The Spallation Neutron Source accelerator systems will deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of an H- injector, capable of producing one-ms-long pulses at 60Hz repetition rate with 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The 2.5MeV beam from the Front End is accelerated to 86 MeV in the Drift Tube Linac, then to 185 MeV in a Coupled-Cavity Linac and finally to 1 GeV in the Superconducting Linac. The staged beam commissioning of the accelerator complex is proceeding as component installation progresses. The Front End, Drift Tube Linac and three of the four Coupled-Cavity Linac modules have been commissioned with beam at ORNL. Results and status of the beam commissioning program will be presented.

 
FPAE049 Development and Implementation of ?T Procedure for the SNS Linac 3064
 
  • A. Feschenko, S. Bragin, Y. Kiselev, L.V. Kravchuk, O. Volodkevich
    RAS/INR, Moscow
  • A.V. Aleksandrov, J. Galambos, S. Henderson, A.P. Shishlo
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.

The ?t procedure is a time of flight technique for setting the phases and amplitudes of accelerating fields in a multi-cavity linac. It was initially proposed and developed for the LAMPF linac in the early seventies and since then has been used in several accelerators. The SNS linac includes four CCL modules (Side Coupled Structure) operating at 805 MHz for the energy range from 86.8 MeV up to 185.6 MeV. The ?t procedure has been implemented for the SNS CCL linac and was used for its initial beam commissioning. Brief theory of the procedure, the results of the design parameter calculations and the experimental results of phase and amplitude setpoints are presented and discussed.

 
FPAE057 Beam Dynamics Studies and Beam Quality in the SNS Normal-Conducting Linac 3381
 
  • S. Henderson, A.V. Aleksandrov, D.A. Bartkoski, C. Chu, S.M. Cousineau, V.V. Danilov, G.W. Dodson, J. Galambos, D.-O. Jeon, M.A. Plum, M.P. Stockli
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. SNS is a partnership of six national laboratories: Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos and Oak Ridge.

The Spallation Neutron Source accelerator systems will provide a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron production. The accelerator complex consists of an H- injector capable of producing 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The linear accelerator consists of a Drift Tube Linac, a Coupled-Cavity Linac and a Superconducting Linac which provide 1.5 mA average current to the accumulator ring. The staged beam commissioning of the accelerator complex is proceeding as component installation progresses. Recently, the normal-conducting linear accelerator was beam commissioned. A number of beam dynamics and beam quality measurements will be reported, including the measurement of transverse emittances in the H- injector, and the evolution of halo and emittance along the linac.

 
FPAT016 PASTA – An RF Phase and Amplitude Scan and Tuning Application 1491
 
  • J. Galambos, A.V. Aleksandrov, C. Deibele, S. Henderson
    ORNL, Oak Ridge, Tennessee
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.

To assist the beam commissioning in the Spallation Neutron Source (SNS) linac, a general purpose RF tuning application has been written to help set RF phase and amplitude. It follows the signature matching procedure described in Ref.* The method involves varying an upstream Rf cavity amplitude and phase settings and comparing the measured downstream beam phase responses to model predictions. The model input for cavity phase and amplitude calibration and for the beam energy are varied to best match observations. This scheme has advantages over other RF tuning techniques of not requiring intercepting devices (e.g. Faraday Cups), and not being restricted to a small linear response regime near the design values. The application developed here is general and can be applied to different RF structure types in the SNS linac. Example applications in the SNS Drift Tube Linac (DTL) and Coupled Cavity Linac (CCL) structures will be shown.

*T.L. Owens, M.B. Popovic, E.S. McCrory, C.W. Schmidt, L. J. Allen, "Phase Scan Signature Matching for Linac Tuning," Particle Accelerators, 1994 Vol 98, p. 169.

 
FPAT068 Spallation Neutron Source Drift Tube Linac Resonance Control Cooling System Modeling 3754
 
  • J.Y. Tang, A.V. Aleksandrov, M.M. Champion, P.E. Gibson, J.P. Schubert
    ORNL, Oak Ridge, Tennessee
  • A. Feschenko, Y. Kiselev, A.S. Kovalishin, L.V. Kravchuk, A.I. Kvasha
    RAS/INR, Moscow
 
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.

The Resonance Control Cooling System (RCCS) for the warm linac of the Spallation Neutron Source was designed by Los Alamos National Laboratory. The primary design focus was on water cooling of individual component contributions. The sizing the RCCS water skid was accomplished by means of a specially created SINDA/FLUINT model tailored to these system requirements. A new model was developed in Matlab Simulink and incorporates actual operational values and control valve interactions. Included is the dependence of RF input power on system operation, cavity detuning values during transients, time delays that result from water flows through the heat exchanger, the dynamic process of water warm-up in the cooling system due to dissipated RF power on the cavity surface, differing contributions on the cavity detuning due to drift tube and wall heating, and a dynamic model of the heat exchanger with characteristics in close agreement to the real unit. Because of the Matlab Simulink model, investigation of a wide range of operating issues during both transient and steady state operation is now possible. Results of the DTL RCCS modeling are presented