IPAC2021 - List of Authors (Wang, E.)

Paper	Title	Page
TUPAB036	The Accelerator Design Progress for EIC Strong Hadron Cooling	1424
	E. Wang, S. Peggs, V. Ptitsyn, F.J. Willeke, W. Xu BNL, Upton, New York, USA S.V. Benson JLab, Newport News, Virginia, USA D. Douglas Douglas Consulting, York, Virginia, USA C.M. Gulliford, G.H. Hoffstaetter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA C.E. Mayes Xelera Research LLC, Ithaca, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy, The Electron-Ion Collider will achieve a luminosity of 10³⁴ cm^-2 s⁻¹ by incorporating strong hadron cooling to counteract hadron Intra-Beam Scattering, using a coherent electron cooling scheme. An accelerator will deliver the beams with key parameters, such as 1 nC bunch charge, and 1e-4 energy spread. The paper presents the design and beam dynamics simulation results. Methods to minimize beam noise, the challenges of the accelerator design, and the R&D topics being pursued are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB036
About •	paper received ※ 16 May 2021 paper accepted ※ 11 June 2021 issue date ※ 26 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB037	The Design of a High Charge Polarized Preinjector for the Electron-Ion Collider	1428
	E. Wang, W. Liu, V.H. Ranjbar, J. Skaritka, N. Tsoupas BNL, Upton, New York, USA J.M. Grames, J. Guo JLab, Newport News, Virginia, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy The design of the electron pre-injector of the Electron-Ion Collider (EIC) project to generate 4 x 7 nC bunch has been advancing to meet the requirements for injection into the Rapid Cycling Synchrotron (RCS). The major challenges are high charge transport and achieving small energy spread from 3 GHz traveling-wave plate(TWP). The designed preinjector includes the polarized electron source, bunching section, TWP Linac, zigzag phase space manipulation and spin rotator. In this report, we will discuss the RF frequency selection and the way to reduce energy spread down to 0.2% by longitudinal phase space manipulate. We will also report the results of beamline simulation using space charge code and the conceptual design of spin rotator.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB037
About •	paper received ※ 16 May 2021 paper accepted ※ 15 June 2021 issue date ※ 31 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB179	Design of an MBEC Cooler for the EIC	1819
	W.F. Bergan, P. Baxevanis, M. Blaskiewicz, E. Wang BNL, Upton, New York, USA G. Stupakov SLAC, Menlo Park, California, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. Reaching maximal luminosity for the planned electron-ion collider (EIC) calls for some form of strong hadron cooling to counteract beam emittance increase from IBS. We discuss plans to use microbunched electron cooling (MBEC) to achieve this. The principle of this method is that the hadron beam will copropogate with a beam of electrons, imprinting its own density modulation on the electron beam. These electron phase space perturbations are amplified before copropogating with the hadrons again in a kicker section. By making the hadron transit time between modulator and kicker dependent on hadron energy and transverse offset, the energy kicks which they receive from the electrons will tend to reduce their longitudinal and transverse emittances. We discuss details of the analytic theory and searches for optimal realistic parameter settings to achieve a maximal cooling rate while limiting the effects of diffusion and electron beam saturation. We also place limits on the necessary electron beam quality. These results are corroborated by simulations.
	Poster TUPAB179 [4.006 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB179
About •	paper received ※ 19 May 2021 paper accepted ※ 18 June 2021 issue date ※ 19 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXA04	The RCS Design Status for the Electron Ion Collider	2521
	V.H. Ranjbar, M. Blaskiewicz, Z.A. Conway, D.M. Gassner, C. Hetzel, B. Lepore, H. Lovelace III, I. Marneris, F. Méot, C. Montag, J. Skaritka, N. Tsoupas, E. Wang, F.J. Willeke BNL, Upton, New York, USA J.M. Grames, J. Guo, F. Lin, V.S. Morozov, T. Satogata JLab, Newport News, Virginia, USA D. Sagan Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The design of the Electron-Ion Collider Rapid Cycling Synchrotron (RCS) to be constructed at Brookhaven National Laboratory is advancing to meet the injection requirements for the Electron Storage Ring (ESR). Over the past year activities are focused on developing the approach to inject two 28 nC bunches every second, up from the original design of one 10nC bunch every second. The solution requires several key changes concerning the injection and extraction kickers, charge accumulation via bunch merging and a carefully calibrated RF acceleration profile to match the longitudinal emittance required by the ESR.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEXA04
About •	paper received ※ 19 May 2021 paper accepted ※ 26 August 2021 issue date ※ 31 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB005	Design Status Update of the Electron-Ion Collider	2585
	C. Montag, E.C. Aschenauer, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, Z.A. Conway, K.A. Drees, A.V. Fedotov, W. Fischer, C. Folz, D.M. Gassner, X. Gu, R.C. Gupta, Y. Hao, A. Hershcovitch, C. Hetzel, D. Holmes, H. Huang, W.A. Jackson, J. Kewisch, Y. Li, C. Liu, H. Lovelace III, Y. Luo, M. Mapes, D. Marx, G.T. McIntyre, F. Méot, M.G. Minty, S.K. Nayak, R.B. Palmer, B. Parker, S. Peggs, B. Podobedov, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, S. Verdú-Andrés, E. Wang, D. Weiss, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang BNL, Upton, New York, USA S.V. Benson, J.M. Grames, F. Lin, T.J. Michalski, V.S. Morozov, E.A. Nissen, J.P. Preble, R.A. Rimmer, T. Satogata, A. Seryi, M. Wiseman, W. Wittmer, Y. Zhang JLab, Newport News, Virginia, USA Y. Cai, Y.M. Nosochkov, G. Stupakov, M.K. Sullivan SLAC, Menlo Park, California, USA K.E. Deitrick, C.M. Gulliford, G.H. Hoffstaetter, J.E. Unger Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA E. Gianfelice-Wendt Fermilab, Batavia, Illinois, USA T. Satogata ODU, Norfolk, Virginia, USA D. Xu FRIB, East Lansing, Michigan, USA
	Funding: Work supported by BSA, LLC under Contract No. DE-SC0012704, by JSA, LLC under Contract No. DE-AC05-06OR23177, and by SLAC under Contract No. DE-AC02-76SF00515 with the U.S. Department of Energy. The design of the electron-ion collider EIC to be constructed at Brookhaven National Laboratory has been continuously evolving towards a realistic and robust design that meets all the requirements set forth by the nuclear physics community in the White Paper. Over the past year activities have been focused on maturing the design, and on developing alternatives to mitigate risk. These include improvements of the interaction region design as well as modifications of the hadron ring vacuum system to accommodate the high average and peak beam currents. Beam dynamics studies have been performed to determine and optimize the dynamic aperture in the two collider rings and the beam-beam performance. We will present the EIC design with a focus on recent developments.
	Poster WEPAB005 [2.095 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB005
About •	paper received ※ 14 May 2021 paper accepted ※ 22 June 2021 issue date ※ 17 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB138	Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams	2936
	I. Petrushina SUNY SB, Stony Brook, New York, USA S.A. Belomestnykh, S. Kazakov, T.N. Khabiboulline, M. Martinello, Y.M. Pischalnikov, V.P. Yakovlev Fermilab, Batavia, Illinois, USA J.C. Brutus, P. Inacker, Y.C. Jing, V. Litvinenko, J. Skaritka, E. Wang BNL, Upton, New York, USA J.M. Grames, M. Poelker, R. Suleiman, E.J-M. Voutier JLab, Newport News, Virginia, USA
	High-current low-emittance CW electron beams are indispensable for nuclear and high-energy physics fixed target and collider experiments, cooling high energy hadron beams, generating CW beams of monoenergetic X-rays (in FELs) and gamma-rays (in Compton sources). Polarization of electrons in these beams provides extra value by opening a new set of observables and frequently improving the data quality. We report on the upgrade of the unique and fully functional CW SRF 1.25 MeV SRF gun, built as part of the Coherent electron Cooling (CeC) project, which has demonstrated sustained CW operation with CsK2Sb photocathodes generating electron bunches with record-low transverse emittances and record-high bunch charge exceeding 10 nC. We propose to extend the capabilities of this system to high average current of 100 milliampere in two steps: increasing the current 30-fold at each step with the goal to demonstrate reliable long-term operation of the high-current low-emittance CW SRF guns. We also propose to test polarized GaAs photocathodes in the ultra-high vacuum (UHV) environment of the SRF gun, which has never been successfully demonstrated in RF accelerators.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB138
About •	paper received ※ 25 May 2021 paper accepted ※ 29 July 2021 issue date ※ 23 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB273	Cooling and Diffusion Rates in Coherent Electron Cooling Concepts	3281
	S. Nagaitsev, V.A. Lebedev Fermilab, Batavia, Illinois, USA W.F. Bergan, E. Wang BNL, Upton, New York, USA G. Stupakov SLAC, Menlo Park, California, USA
	Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. We present analytic cooling and diffusion rates for a simplified model of coherent electron cooling (CEC), based on a proton energy kick at each turn. This model also allows to estimate analytically the rms value of electron beam density fluctuations in the "kicker" section. Having such analytic expressions should allow for better understanding of the CEC mechanism, and for a quicker analysis and optimization of main system parameters. Our analysis is applicable to any CEC amplification mechanism, as long as the wake (kick) function is available.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB273
About •	paper received ※ 10 May 2021 paper accepted ※ 28 July 2021 issue date ※ 15 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB141	Novel Design of a HVDC Magnetized Electron Source	4034
	O.H. Rahman, J. Skaritka, E. Wang BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. The hadron beam in EIC is flat with a transverse size ratio of about 1:3. The cooling rate of the hadron beam can be maximized if the electron beam from the strong hadron cooler fully overlaps with the hadron beam. Therefore, generating a flat electron beam is essential. The most efficient way to generate a flat electron beam is to produce a magnetized beam first, and then convert it to flat to the desired transverse size ratio. Using a Magnetized electron beam is a promising way to cool high-energy hadrons. One of the major challenges in producing magnetized beams is fine-tuning the longitudinal magnetic field on the cathode surface and maintaining the desired field uniformity over the emission area. In this paper, we discuss the design of a novel high voltage DC gun capable of fine-tuning the B field on the cathode. This is achieved by installing a permanent magnet inside the cathode puck, with a solenoid field at the front of the cathode. We show magnetostatic simulation to prove the feasibility of this idea. We also show preliminary beam dynamics simulations showing emittance from the gun as the permanent magnet and solenoidal fields are tuned for minimum emittance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB141
About •	paper received ※ 19 May 2021 paper accepted ※ 02 August 2021 issue date ※ 25 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Accelerator Design Progress for EIC Strong Hadron Cooling

1424

E. Wang, S. Peggs, V. Ptitsyn, F.J. Willeke, W. Xu
BNL, Upton, New York, USA
S.V. Benson
JLab, Newport News, Virginia, USA
D. Douglas
Douglas Consulting, York, Virginia, USA
C.M. Gulliford, G.H. Hoffstaetter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
C.E. Mayes
Xelera Research LLC, Ithaca, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy,
The Electron-Ion Collider will achieve a luminosity of 10³⁴ cm^-2 s⁻¹ by incorporating strong hadron cooling to counteract hadron Intra-Beam Scattering, using a coherent electron cooling scheme. An accelerator will deliver the beams with key parameters, such as 1 nC bunch charge, and 1e-4 energy spread. The paper presents the design and beam dynamics simulation results. Methods to minimize beam noise, the challenges of the accelerator design, and the R&D topics being pursued are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB036

About •

paper received ※ 16 May 2021 paper accepted ※ 11 June 2021 issue date ※ 26 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB037

The Design of a High Charge Polarized Preinjector for the Electron-Ion Collider

1428

E. Wang, W. Liu, V.H. Ranjbar, J. Skaritka, N. Tsoupas
BNL, Upton, New York, USA
J.M. Grames, J. Guo
JLab, Newport News, Virginia, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
The design of the electron pre-injector of the Electron-Ion Collider (EIC) project to generate 4 x 7 nC bunch has been advancing to meet the requirements for injection into the Rapid Cycling Synchrotron (RCS). The major challenges are high charge transport and achieving small energy spread from 3 GHz traveling-wave plate(TWP). The designed preinjector includes the polarized electron source, bunching section, TWP Linac, zigzag phase space manipulation and spin rotator. In this report, we will discuss the RF frequency selection and the way to reduce energy spread down to 0.2% by longitudinal phase space manipulate. We will also report the results of beamline simulation using space charge code and the conceptual design of spin rotator.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB037

About •

paper received ※ 16 May 2021 paper accepted ※ 15 June 2021 issue date ※ 31 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB179

Design of an MBEC Cooler for the EIC

1819

W.F. Bergan, P. Baxevanis, M. Blaskiewicz, E. Wang
BNL, Upton, New York, USA
G. Stupakov
SLAC, Menlo Park, California, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
Reaching maximal luminosity for the planned electron-ion collider (EIC) calls for some form of strong hadron cooling to counteract beam emittance increase from IBS. We discuss plans to use microbunched electron cooling (MBEC) to achieve this. The principle of this method is that the hadron beam will copropogate with a beam of electrons, imprinting its own density modulation on the electron beam. These electron phase space perturbations are amplified before copropogating with the hadrons again in a kicker section. By making the hadron transit time between modulator and kicker dependent on hadron energy and transverse offset, the energy kicks which they receive from the electrons will tend to reduce their longitudinal and transverse emittances. We discuss details of the analytic theory and searches for optimal realistic parameter settings to achieve a maximal cooling rate while limiting the effects of diffusion and electron beam saturation. We also place limits on the necessary electron beam quality. These results are corroborated by simulations.

Poster TUPAB179 [4.006 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB179

About •

paper received ※ 19 May 2021 paper accepted ※ 18 June 2021 issue date ※ 19 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXA04

The RCS Design Status for the Electron Ion Collider

2521

V.H. Ranjbar, M. Blaskiewicz, Z.A. Conway, D.M. Gassner, C. Hetzel, B. Lepore, H. Lovelace III, I. Marneris, F. Méot, C. Montag, J. Skaritka, N. Tsoupas, E. Wang, F.J. Willeke
BNL, Upton, New York, USA
J.M. Grames, J. Guo, F. Lin, V.S. Morozov, T. Satogata
JLab, Newport News, Virginia, USA
D. Sagan
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The design of the Electron-Ion Collider Rapid Cycling Synchrotron (RCS) to be constructed at Brookhaven National Laboratory is advancing to meet the injection requirements for the Electron Storage Ring (ESR). Over the past year activities are focused on developing the approach to inject two 28 nC bunches every second, up from the original design of one 10nC bunch every second. The solution requires several key changes concerning the injection and extraction kickers, charge accumulation via bunch merging and a carefully calibrated RF acceleration profile to match the longitudinal emittance required by the ESR.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEXA04

About •

paper received ※ 19 May 2021 paper accepted ※ 26 August 2021 issue date ※ 31 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB005

Design Status Update of the Electron-Ion Collider

2585

C. Montag, E.C. Aschenauer, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, Z.A. Conway, K.A. Drees, A.V. Fedotov, W. Fischer, C. Folz, D.M. Gassner, X. Gu, R.C. Gupta, Y. Hao, A. Hershcovitch, C. Hetzel, D. Holmes, H. Huang, W.A. Jackson, J. Kewisch, Y. Li, C. Liu, H. Lovelace III, Y. Luo, M. Mapes, D. Marx, G.T. McIntyre, F. Méot, M.G. Minty, S.K. Nayak, R.B. Palmer, B. Parker, S. Peggs, B. Podobedov, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, S. Verdú-Andrés, E. Wang, D. Weiss, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang
BNL, Upton, New York, USA
S.V. Benson, J.M. Grames, F. Lin, T.J. Michalski, V.S. Morozov, E.A. Nissen, J.P. Preble, R.A. Rimmer, T. Satogata, A. Seryi, M. Wiseman, W. Wittmer, Y. Zhang
JLab, Newport News, Virginia, USA
Y. Cai, Y.M. Nosochkov, G. Stupakov, M.K. Sullivan
SLAC, Menlo Park, California, USA
K.E. Deitrick, C.M. Gulliford, G.H. Hoffstaetter, J.E. Unger
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
E. Gianfelice-Wendt
Fermilab, Batavia, Illinois, USA
T. Satogata
ODU, Norfolk, Virginia, USA
D. Xu
FRIB, East Lansing, Michigan, USA

Funding: Work supported by BSA, LLC under Contract No. DE-SC0012704, by JSA, LLC under Contract No. DE-AC05-06OR23177, and by SLAC under Contract No. DE-AC02-76SF00515 with the U.S. Department of Energy.
The design of the electron-ion collider EIC to be constructed at Brookhaven National Laboratory has been continuously evolving towards a realistic and robust design that meets all the requirements set forth by the nuclear physics community in the White Paper. Over the past year activities have been focused on maturing the design, and on developing alternatives to mitigate risk. These include improvements of the interaction region design as well as modifications of the hadron ring vacuum system to accommodate the high average and peak beam currents. Beam dynamics studies have been performed to determine and optimize the dynamic aperture in the two collider rings and the beam-beam performance. We will present the EIC design with a focus on recent developments.

Poster WEPAB005 [2.095 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB005

About •

paper received ※ 14 May 2021 paper accepted ※ 22 June 2021 issue date ※ 17 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB138

Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams

2936

I. Petrushina
SUNY SB, Stony Brook, New York, USA
S.A. Belomestnykh, S. Kazakov, T.N. Khabiboulline, M. Martinello, Y.M. Pischalnikov, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA
J.C. Brutus, P. Inacker, Y.C. Jing, V. Litvinenko, J. Skaritka, E. Wang
BNL, Upton, New York, USA
J.M. Grames, M. Poelker, R. Suleiman, E.J-M. Voutier
JLab, Newport News, Virginia, USA

High-current low-emittance CW electron beams are indispensable for nuclear and high-energy physics fixed target and collider experiments, cooling high energy hadron beams, generating CW beams of monoenergetic X-rays (in FELs) and gamma-rays (in Compton sources). Polarization of electrons in these beams provides extra value by opening a new set of observables and frequently improving the data quality. We report on the upgrade of the unique and fully functional CW SRF 1.25 MeV SRF gun, built as part of the Coherent electron Cooling (CeC) project, which has demonstrated sustained CW operation with CsK2Sb photocathodes generating electron bunches with record-low transverse emittances and record-high bunch charge exceeding 10 nC. We propose to extend the capabilities of this system to high average current of 100 milliampere in two steps: increasing the current 30-fold at each step with the goal to demonstrate reliable long-term operation of the high-current low-emittance CW SRF guns. We also propose to test polarized GaAs photocathodes in the ultra-high vacuum (UHV) environment of the SRF gun, which has never been successfully demonstrated in RF accelerators.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB138

About •

paper received ※ 25 May 2021 paper accepted ※ 29 July 2021 issue date ※ 23 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB273

Cooling and Diffusion Rates in Coherent Electron Cooling Concepts

3281

S. Nagaitsev, V.A. Lebedev
Fermilab, Batavia, Illinois, USA
W.F. Bergan, E. Wang
BNL, Upton, New York, USA
G. Stupakov
SLAC, Menlo Park, California, USA

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
We present analytic cooling and diffusion rates for a simplified model of coherent electron cooling (CEC), based on a proton energy kick at each turn. This model also allows to estimate analytically the rms value of electron beam density fluctuations in the "kicker" section. Having such analytic expressions should allow for better understanding of the CEC mechanism, and for a quicker analysis and optimization of main system parameters. Our analysis is applicable to any CEC amplification mechanism, as long as the wake (kick) function is available.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB273

About •

paper received ※ 10 May 2021 paper accepted ※ 28 July 2021 issue date ※ 15 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB141

Novel Design of a HVDC Magnetized Electron Source

4034

O.H. Rahman, J. Skaritka, E. Wang
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
The hadron beam in EIC is flat with a transverse size ratio of about 1:3. The cooling rate of the hadron beam can be maximized if the electron beam from the strong hadron cooler fully overlaps with the hadron beam. Therefore, generating a flat electron beam is essential. The most efficient way to generate a flat electron beam is to produce a magnetized beam first, and then convert it to flat to the desired transverse size ratio. Using a Magnetized electron beam is a promising way to cool high-energy hadrons. One of the major challenges in producing magnetized beams is fine-tuning the longitudinal magnetic field on the cathode surface and maintaining the desired field uniformity over the emission area. In this paper, we discuss the design of a novel high voltage DC gun capable of fine-tuning the B field on the cathode. This is achieved by installing a permanent magnet inside the cathode puck, with a solenoid field at the front of the cathode. We show magnetostatic simulation to prove the feasibility of this idea. We also show preliminary beam dynamics simulations showing emittance from the gun as the permanent magnet and solenoidal fields are tuned for minimum emittance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB141

About •

paper received ※ 19 May 2021 paper accepted ※ 02 August 2021 issue date ※ 25 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)