IPAC2017 - List of Authors (Mazzoni, S.)

Paper	Title	Page
MOPAB111	Diffraction Radiation for Non-Invasive, High-Resolution Beam Size Measurements in Future Linear Colliders	381
SUSPSIK079	use link to see paper's listing under its alternate paper code
	M. Bergamaschi, R. Kieffer, T. Lefèvre, S. Mazzoni CERN, Geneva, Switzerland A. Aryshev, N. Terunuma KEK, Ibaraki, Japan M. Bergamaschi, P. Karataev, K.O. Kruchinin JAI, Egham, Surrey, United Kingdom M. Bergamaschi, P. Karataev, K.O. Kruchinin Royal Holloway, University of London, Surrey, United Kingdom
	Next generation linear colliders such as the Compact Linear Collider (CLIC) or the International Linear Collider (ILC) will accelerate particle beams with extremely small emittance. The high current and small size of the beam (micron-scale) due to such small emittance require non-invasive, high-resolution techniques for beam diagnostics. Diffraction Radiation (DR), a polarization radiation that appears when a charged particle moves in the vicinity of a medium, is an ideal candidate being non-invasive and allowing beams as small as a few tens of microns to be measured. Since DR is sensitive to beam parameters other than the transverse profile (e.g. its divergence and position), preparatory simulations have been performed with realistic beam parameters. A new dedicated instrument was installed in the KEK-ATF2 beam line in February 2016. At present DR is observed in the visible wavelength range, with an upgrade to the ultraviolet (200nm) planned for spring 2017 to optimize sensitivity to smaller beam sizes. Presented here are the latest results of these DR beam size measurements and simulations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB111
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB118	Cherenkov Diffraction Radiation From Long Dielectric Material: An Intense Source of Photons in the NIR-THz Range	400
	T. Lefèvre, M. Bergamaschi, O.R. Jones, R. Kieffer, S. Mazzoni CERN, Geneva, Switzerland M.G. Billing, J.V. Conway, J.P. Shanks Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA L.M. Bobb DLS, Oxfordshire, United Kingdom P. Karataev Royal Holloway, University of London, Surrey, United Kingdom
	This paper presents the design on the Cornell Electron Storage Ring (CESR) of an experimental set-up to meas-ure incoherent Diffraction Cherenkov Radiation (DChR) produced in a 2 cm long SiO2 radiator by a 2.1 GeV elec-tron beam. The electron beam is circulating at a distance of few mm from the edge of the radiator and the DChR photon output power is expected to be significantly higher than the diffraction radiation power emitted from a metal-lic slit of similar aperture. The radiator design and the detection set-up are presented in detail together with sim-ulations describing the expected properties of the emitted DChR in terms of light intensity and spectral bandwidth. Finally, potential applications of DChR are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB118
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB119	Beam Instrumentation Developments for the Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN	404
	S. Mazzoni, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, S. Burger, F.S. Domingues Sousa, E. Effinger, J. Emery, A. Goldblatt, I. Gorgisyan, E. Gschwendtner, A. Guerrero, L.K. Jensen, T. Lefèvre, D. Medina, B. Moser, G. Schneider, L. Søby, M. Turner, M. Vicente Romero, M. Wendt CERN, Geneva, Switzerland B. Biskup Czech Technical University, Prague 6, Czech Republic M. Turner TUG/ITP, Graz, Austria V.A. Verzilov TRIUMF, Vancouver, Canada
	The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) at CERN aims to develop a proof-of-principle electron accelerator based on proton driven plasma wake-field acceleration. The core of AWAKE is a 10 metre long plasma cell filled with Rubidium vapour in which single, 400 GeV, proton bunches extracted from the CERN Super Proton Synchrotron (SPS) generate a strong plasma wakefield. The plasma is seeded using a femtosecond pulsed Ti:Sapphire laser. The aim of the experiment is to inject low energy electrons onto the plasma wake and accelerate them over this short distance to an energy of several GeV. To achieve its commissioning goals, AWAKE requires the precise measurement of the position and transverse profile of the laser, proton and electron beams as well as their temporal synchronisation. This contribution will present the beam instrumentation systems designed for AWAKE and their performance during the 2016 proton beam commissioning period.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB119
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK001	Upgrade of the Two-Screen Measurement Setup in the AWAKE Experiment	1682
SUSPSIK033	use link to see paper's listing under its alternate paper code
	M. Turner TUG/ITP, Graz, Austria V. Clerc, I. Gorgisyan, E. Gschwendtner, S. Mazzoni, A.V. Petrenko CERN, Geneva, Switzerland
	The AWAKE project at CERN uses a self-modulated §I{400}{GeV/c} proton bunch to drive GV/m wakefields in a §I10{m} long plasma with an electron density of n_pe = 7 × 10¹⁴ \rm{electrons/cm}³. We present the upgrade of a proton beam diagnostic to indirectly prove that the bunch self-modulated by imaging defocused protons with two screens downstream the end of the plasma. The two-screen diagnostic has been installed, commissioned and tested in autumn 2016 and limitations were identified. We plan to install an upgraded diagnostics to overcome these limitations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK032	AWAKE Proton Beam Commissioning	1747
	J.S. Schmidt, D. Barrientos, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, T. Bohl, C. Bracco, S. Cettour Cave, H. Damerau, V. Fedosseev, F. Friebel, S.J. Gessner, A. Goldblatt, E. Gschwendtner, L.K. Jensen, V. Kain, T. Lefèvre, S. Mazzoni, J.C. Molendijk, A. Pardons, C. Pasquino, S.F. Rey, H. Vincke, U. Wehrle CERN, Geneva, Switzerland J.T. Moody MPI-P, München, Germany K. Rieger MPI, Muenchen, Germany
	AWAKE will be the first proton driven plasma wakefield acceleration experiment worldwide. The facility is located in the former CNGS area at CERN and will include a proton, laser and electron beam line merging in a 10 m long plasma cell, which is followed by the experimental diagnostics. In the first phase of the AWAKE physics program, which started at the end of 2016, the effect of the plasma on a high energy proton beam will be studied. A proton bunch is expected to experience the so called self-modulation instability, which leads to the creation of micro-bunches within the long proton bunch. The plasma channel is created in a rubidium vapor via field ionization by a TW laser pulse. This laser beam has to overlap with the proton beam over the full length of the plasma cell, resulting in tight requirements for the stability of the proton beam at the plasma cell in the order of ~ 0.1 mm. In this paper the beam commissioning results of the ~810 m long transfer line for proton bunches with 3·10¹¹ protons/bunch and a momentum of 400 GeV/c will be presented with a focus on the challenges of the parallel operation of the laser and proton beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK032
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK033	LHC Beam Dump Performance in View of the High Luminosity Upgrade	2999
	C. Wiesner, W. Bartmann, C. Bracco, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, B. Goddard, T. Kramer, A. Lechner, N. Magnin, S. Mazzoni, M. Meddahi, V. Senaj CERN, Geneva, Switzerland
	The High Luminosity Large Hadron Collider (HL-LHC) project will increase the total beam intensity in the LHC by nearly a factor of two. Analysis and follow-up of recent operational issues as well as dedicated studies of the LHC Beam Dump System (LBDS) have been carried out to ensure the safe operation with HL-LHC parameters and to decide on possible hardware upgrades to meet the HL-LHC requirements. The fail-safe design must ensure the LBDS performance also for abnormal operation such as asynchronous beam dumps or failing dilution kickers. In this paper, we report on newly observed failure scenarios as the erratic firing of more than one dilution kicker, and discuss their consequences as well as possible mitigation measures in view of the high luminosity upgrade.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK033
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPAB111

Diffraction Radiation for Non-Invasive, High-Resolution Beam Size Measurements in Future Linear Colliders

381

SUSPSIK079

use link to see paper's listing under its alternate paper code

M. Bergamaschi, R. Kieffer, T. Lefèvre, S. Mazzoni
CERN, Geneva, Switzerland
A. Aryshev, N. Terunuma
KEK, Ibaraki, Japan
M. Bergamaschi, P. Karataev, K.O. Kruchinin
JAI, Egham, Surrey, United Kingdom
M. Bergamaschi, P. Karataev, K.O. Kruchinin
Royal Holloway, University of London, Surrey, United Kingdom

Next generation linear colliders such as the Compact Linear Collider (CLIC) or the International Linear Collider (ILC) will accelerate particle beams with extremely small emittance. The high current and small size of the beam (micron-scale) due to such small emittance require non-invasive, high-resolution techniques for beam diagnostics. Diffraction Radiation (DR), a polarization radiation that appears when a charged particle moves in the vicinity of a medium, is an ideal candidate being non-invasive and allowing beams as small as a few tens of microns to be measured. Since DR is sensitive to beam parameters other than the transverse profile (e.g. its divergence and position), preparatory simulations have been performed with realistic beam parameters. A new dedicated instrument was installed in the KEK-ATF2 beam line in February 2016. At present DR is observed in the visible wavelength range, with an upgrade to the ultraviolet (200nm) planned for spring 2017 to optimize sensitivity to smaller beam sizes. Presented here are the latest results of these DR beam size measurements and simulations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB111

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB118

Cherenkov Diffraction Radiation From Long Dielectric Material: An Intense Source of Photons in the NIR-THz Range

400

T. Lefèvre, M. Bergamaschi, O.R. Jones, R. Kieffer, S. Mazzoni
CERN, Geneva, Switzerland
M.G. Billing, J.V. Conway, J.P. Shanks
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
L.M. Bobb
DLS, Oxfordshire, United Kingdom
P. Karataev
Royal Holloway, University of London, Surrey, United Kingdom

This paper presents the design on the Cornell Electron Storage Ring (CESR) of an experimental set-up to meas-ure incoherent Diffraction Cherenkov Radiation (DChR) produced in a 2 cm long SiO2 radiator by a 2.1 GeV elec-tron beam. The electron beam is circulating at a distance of few mm from the edge of the radiator and the DChR photon output power is expected to be significantly higher than the diffraction radiation power emitted from a metal-lic slit of similar aperture. The radiator design and the detection set-up are presented in detail together with sim-ulations describing the expected properties of the emitted DChR in terms of light intensity and spectral bandwidth. Finally, potential applications of DChR are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB118

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB119

Beam Instrumentation Developments for the Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN

404

S. Mazzoni, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, S. Burger, F.S. Domingues Sousa, E. Effinger, J. Emery, A. Goldblatt, I. Gorgisyan, E. Gschwendtner, A. Guerrero, L.K. Jensen, T. Lefèvre, D. Medina, B. Moser, G. Schneider, L. Søby, M. Turner, M. Vicente Romero, M. Wendt
CERN, Geneva, Switzerland
B. Biskup
Czech Technical University, Prague 6, Czech Republic
M. Turner
TUG/ITP, Graz, Austria
V.A. Verzilov
TRIUMF, Vancouver, Canada

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) at CERN aims to develop a proof-of-principle electron accelerator based on proton driven plasma wake-field acceleration. The core of AWAKE is a 10 metre long plasma cell filled with Rubidium vapour in which single, 400 GeV, proton bunches extracted from the CERN Super Proton Synchrotron (SPS) generate a strong plasma wakefield. The plasma is seeded using a femtosecond pulsed Ti:Sapphire laser. The aim of the experiment is to inject low energy electrons onto the plasma wake and accelerate them over this short distance to an energy of several GeV. To achieve its commissioning goals, AWAKE requires the precise measurement of the position and transverse profile of the laser, proton and electron beams as well as their temporal synchronisation. This contribution will present the beam instrumentation systems designed for AWAKE and their performance during the 2016 proton beam commissioning period.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB119

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK001

Upgrade of the Two-Screen Measurement Setup in the AWAKE Experiment

1682

SUSPSIK033

use link to see paper's listing under its alternate paper code

M. Turner
TUG/ITP, Graz, Austria
V. Clerc, I. Gorgisyan, E. Gschwendtner, S. Mazzoni, A.V. Petrenko
CERN, Geneva, Switzerland

The AWAKE project at CERN uses a self-modulated §I{400}{GeV/c} proton bunch to drive GV/m wakefields in a §I10{m} long plasma with an electron density of n_pe = 7 × 10¹⁴ \rm{electrons/cm}³. We present the upgrade of a proton beam diagnostic to indirectly prove that the bunch self-modulated by imaging defocused protons with two screens downstream the end of the plasma. The two-screen diagnostic has been installed, commissioned and tested in autumn 2016 and limitations were identified. We plan to install an upgraded diagnostics to overcome these limitations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK032

AWAKE Proton Beam Commissioning

1747

J.S. Schmidt, D. Barrientos, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, T. Bohl, C. Bracco, S. Cettour Cave, H. Damerau, V. Fedosseev, F. Friebel, S.J. Gessner, A. Goldblatt, E. Gschwendtner, L.K. Jensen, V. Kain, T. Lefèvre, S. Mazzoni, J.C. Molendijk, A. Pardons, C. Pasquino, S.F. Rey, H. Vincke, U. Wehrle
CERN, Geneva, Switzerland
J.T. Moody
MPI-P, München, Germany
K. Rieger
MPI, Muenchen, Germany

AWAKE will be the first proton driven plasma wakefield acceleration experiment worldwide. The facility is located in the former CNGS area at CERN and will include a proton, laser and electron beam line merging in a 10 m long plasma cell, which is followed by the experimental diagnostics. In the first phase of the AWAKE physics program, which started at the end of 2016, the effect of the plasma on a high energy proton beam will be studied. A proton bunch is expected to experience the so called self-modulation instability, which leads to the creation of micro-bunches within the long proton bunch. The plasma channel is created in a rubidium vapor via field ionization by a TW laser pulse. This laser beam has to overlap with the proton beam over the full length of the plasma cell, resulting in tight requirements for the stability of the proton beam at the plasma cell in the order of ~ 0.1 mm. In this paper the beam commissioning results of the ~810 m long transfer line for proton bunches with 3·10¹¹ protons/bunch and a momentum of 400 GeV/c will be presented with a focus on the challenges of the parallel operation of the laser and proton beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK032

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK033

LHC Beam Dump Performance in View of the High Luminosity Upgrade

2999

C. Wiesner, W. Bartmann, C. Bracco, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, B. Goddard, T. Kramer, A. Lechner, N. Magnin, S. Mazzoni, M. Meddahi, V. Senaj
CERN, Geneva, Switzerland

The High Luminosity Large Hadron Collider (HL-LHC) project will increase the total beam intensity in the LHC by nearly a factor of two. Analysis and follow-up of recent operational issues as well as dedicated studies of the LHC Beam Dump System (LBDS) have been carried out to ensure the safe operation with HL-LHC parameters and to decide on possible hardware upgrades to meet the HL-LHC requirements. The fail-safe design must ensure the LBDS performance also for abnormal operation such as asynchronous beam dumps or failing dilution kickers. In this paper, we report on newly observed failure scenarios as the erratic firing of more than one dilution kicker, and discuss their consequences as well as possible mitigation measures in view of the high luminosity upgrade.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK033

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)