IPAC2016 - List of Keywords (superconducting-cavity)

Paper	Title	Other Keywords	Page
MOPOY030	Superconducting Cavity Phase and Amplitude Measurement in Low Energy Accelerating Section	LLRF, cavity, linac, beam-transport	919
	C. Meng, H. Geng, F. Yan, Y.L. Zhao IHEP, Beijing, People's Republic of China
	Superconducting linear accelerator is the tendency in linac design with the development of superconducting RF technology. Superconducting cavities used as accelerating section in low energy Hadron linac are more and more common. The 5MeV test stand of CADS accelerator Injector I is composed of an ion source, a LEBT, a 325MHz RFQ, a MEBT, a cryogenic module (CM1) of seven SC spoke cavities (β=0.12) , seven SC solenoids, seven cold BPMs and a beam dump. The phase and amplitude setting of superconducting cavity are very important at the operation of accelerator, so beam based measurement of cavity phase and amplitude is necessary. Beam based phase scan is the most simple and effective method. Because the significant velocity changes in superconducting cavity at low energy section, the effective voltage is changing with cavity phase, meanwhile the synchronous phase is non-linear with LLRF phase. Above two problem make the cavity phase determination difficult. New date fitting method is proposed to solve these problem in this paper. Some measurements of spoke cavities in the CADS CM1 are also presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOY030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMY037	Realization of a System to Monitor Water Quality and for Cooling a TPS KEKB Superconducting Cavity CPL/HOM	HOM, cavity, monitoring, operation	3740
	L.J. Chen, F.-Y. Chang, L.-H. Chang, M.H. Chang, PY. Chen, F.-T. Chung, M.-C. Lin, Z.K. Liu, C.H. Lo, C.L. Tsai, M.H. Tsai, Ch. Wang, M.-S. Yeh, T.-C. Yu NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source (TPS) is a 3GeV synchrotron accelerator and is built next to the present Taiwan Light Source (TLS) [1]. The stability of electron beam is pro-vided by Low-level RF control system for keeping Gap voltage and phase to be constant[2]. The Gap voltage for accelerating electron beam is provided by KEKB super-conducting cavity. During routine operation of the super-conducting cavity, water cooling system is necessary for stabilize the accessory components of the cavity to avoid damage or abnormal of the system. This article would introduce the realization and integration of the water quality monitoring and cooling system for TPS supercon-ducting cavity input coupler and high order mode damper (CPL/HOM). Brief description is shown in first section. The detail architecture and function of the designed signal monitoring system will be discussed in 2nd section. The 3rd section will have further description of interlocks for system protection. The final section would summarize the water quality monitoring and cooling system in this article.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMY037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPOY030

Superconducting Cavity Phase and Amplitude Measurement in Low Energy Accelerating Section

LLRF, cavity, linac, beam-transport

919

C. Meng, H. Geng, F. Yan, Y.L. Zhao
IHEP, Beijing, People's Republic of China

Superconducting linear accelerator is the tendency in linac design with the development of superconducting RF technology. Superconducting cavities used as accelerating section in low energy Hadron linac are more and more common. The 5MeV test stand of CADS accelerator Injector I is composed of an ion source, a LEBT, a 325MHz RFQ, a MEBT, a cryogenic module (CM1) of seven SC spoke cavities (β=0.12) , seven SC solenoids, seven cold BPMs and a beam dump. The phase and amplitude setting of superconducting cavity are very important at the operation of accelerator, so beam based measurement of cavity phase and amplitude is necessary. Beam based phase scan is the most simple and effective method. Because the significant velocity changes in superconducting cavity at low energy section, the effective voltage is changing with cavity phase, meanwhile the synchronous phase is non-linear with LLRF phase. Above two problem make the cavity phase determination difficult. New date fitting method is proposed to solve these problem in this paper. Some measurements of spoke cavities in the CADS CM1 are also presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOY030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMY037

Realization of a System to Monitor Water Quality and for Cooling a TPS KEKB Superconducting Cavity CPL/HOM

HOM, cavity, monitoring, operation

3740

L.J. Chen, F.-Y. Chang, L.-H. Chang, M.H. Chang, PY. Chen, F.-T. Chung, M.-C. Lin, Z.K. Liu, C.H. Lo, C.L. Tsai, M.H. Tsai, Ch. Wang, M.-S. Yeh, T.-C. Yu
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source (TPS) is a 3GeV synchrotron accelerator and is built next to the present Taiwan Light Source (TLS) [1]. The stability of electron beam is pro-vided by Low-level RF control system for keeping Gap voltage and phase to be constant[2]. The Gap voltage for accelerating electron beam is provided by KEKB super-conducting cavity. During routine operation of the super-conducting cavity, water cooling system is necessary for stabilize the accessory components of the cavity to avoid damage or abnormal of the system. This article would introduce the realization and integration of the water quality monitoring and cooling system for TPS supercon-ducting cavity input coupler and high order mode damper (CPL/HOM). Brief description is shown in first section. The detail architecture and function of the designed signal monitoring system will be discussed in 2nd section. The 3rd section will have further description of interlocks for system protection. The final section would summarize the water quality monitoring and cooling system in this article.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMY037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)