IPAC2016 - List of Authors (O'Connell, T.I.)

Paper	Title	Page
WEPMR015	Surface Topography Techniques at Cornell University: Optical Inspection and Surface Replica	2292
	G.M. Ge, F. Furuta, D. Gonnella, D.L. Hall, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, J. Sears Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Surface imperfections significantly limit the performance of superconducting radio frequency (SRF) cavities. The development of surface topography techniques aims to locate the surface flaws in an SRF cavity and profile their geometry details. This effort plays an important role of quality control in cavity productions as well as provides contour information of the defects for understanding quench mechanisms. The surface topography techniques at Cornell University include an optical inspection system and surface replica technique. In this paper, we present the details of the techniques and show features found in the SRF cavities at Cornell.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR018	Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule	2298
	R.G. Eichhorn, A.C. Bartnik, B.M. Dunham, G.M. Ge, G.H. Hoffstaetter, H. Lee, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	To demonstrate key parameters of a an energy recovery linac (ERL) at Cornel, an injector based on a photo gun and an SRF cryomodule was designed and built. The goal was to demonstrate high current generation while achieving low emittances. While the emittance goal has been reached, the current achieved so far is 75 mA. Even though this is a world record, it is still below the targeted 100 mA. While ramping up the current we observed excessive heating in the fundamental power coupler which we were able to track down to insufficient cooling of the 80 K intercepts. These intercepts are cooled by a stream of parallel cryogenic flows which we found to be unbalanced. In this paper we will review the finding, describe the analysis we did, modeling of the parallel flow and the modifications made to the module to overcome the heating.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR020	First Cool-down of the Cornell ERL Main Linac Cryo-Module	2305
	R.G. Eichhorn, J.V. Conway, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, G.H. Hoffstaetter, J.J. Kaufman, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Cornell University has finished building a 10 m long superconducting accelerator module as a prototype of the main linac of a proposed ERL facility. This module houses 6 superconducting cavities- operated at 1.8 K in continuous wave (CW) mode with a design field of 16 MV/m and a Quality factor of 2x10¹⁰. We wil shortly review the design and focus on reporting on the first cool-down of this module. We will giving data for various cool-down scenarios (fast/ slow), uniformity and performance
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR022	ERL Main Linac Cryomodule Cavity Performance and Effect of Thermal Cycling	2312
	F. Furuta, J. Dobbins, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Cornell has designed, fabricated, and tested a high current (100 mA) CW SRF prototype cryomodule for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell . It houses six 7-cell SRF cavities with individual HOM absorbers and one magnet/ BPM section. Cavities are targeted to operate with high Qo of 2.0·10¹⁰ at 16.2 MV/m, 1.8 K in continuous wave (CW) mode. We will report the RF test results of 7-cell cavities in this cryomodule after initial cooldown and several thermal cycles with different cooldown method.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW004	Progress in Detector Design and Installation for Measurements of Electron Cloud Trapping in Quadrupole Magnetic Fields at CesrTA	2420
	J.A. Crittenden, S. Barrett, M.G. Billing, K.A. Jones, Y. Li, T.I. O'Connell, K. Olear, S. Poprocki, D. L. Rubin, J.P. Sikora Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: Work supported by the US National Science Foundation PHY-1416318, PHY-0734867, PHY-1002467, and the U.S. Department of Energy DE-FC02-08ER41538 Following up on our 2013 and 2014 measurements of electron cloud trapping in a quadrupole magnet with 7.4~T/m gradient in the 5.3~GeV positron storage ring at Cornell University, we have redesigned the shielded-stripline time-resolving electron detector and installed a wide-aperture quadrupole magnet at a location in the ring where its field can be compensated by a nearby quadrupole, thus allowing the first measurements of cloud trapping as a function of field gradient. The transverse acceptance of the electron detector has been tripled, allowing tests of model predictions indicating a dramatic cloud splitting effect which exhibits a threshold behavior as a function of bunch population. In addition, a vacuum chamber optimized for cloud buildup measurements using resonant microwave phenomena has been employed. We describe design considerations and modeling predictions for the upcoming 2016 data-taking run. This project is part of the CESR Test Accelerator program, which investigates performance limitations in low-emittance storage and damping rings.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Surface Topography Techniques at Cornell University: Optical Inspection and Surface Replica

2292

G.M. Ge, F. Furuta, D. Gonnella, D.L. Hall, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, J. Sears
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Surface imperfections significantly limit the performance of superconducting radio frequency (SRF) cavities. The development of surface topography techniques aims to locate the surface flaws in an SRF cavity and profile their geometry details. This effort plays an important role of quality control in cavity productions as well as provides contour information of the defects for understanding quench mechanisms. The surface topography techniques at Cornell University include an optical inspection system and surface replica technique. In this paper, we present the details of the techniques and show features found in the SRF cavities at Cornell.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR018

Time Resolved Cryogenic Cooling Analysis of the Cornell Injector Cryomodule

2298

R.G. Eichhorn, A.C. Bartnik, B.M. Dunham, G.M. Ge, G.H. Hoffstaetter, H. Lee, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

To demonstrate key parameters of a an energy recovery linac (ERL) at Cornel, an injector based on a photo gun and an SRF cryomodule was designed and built. The goal was to demonstrate high current generation while achieving low emittances. While the emittance goal has been reached, the current achieved so far is 75 mA. Even though this is a world record, it is still below the targeted 100 mA. While ramping up the current we observed excessive heating in the fundamental power coupler which we were able to track down to insufficient cooling of the 80 K intercepts. These intercepts are cooled by a stream of parallel cryogenic flows which we found to be unbalanced. In this paper we will review the finding, describe the analysis we did, modeling of the parallel flow and the modifications made to the module to overcome the heating.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR020

First Cool-down of the Cornell ERL Main Linac Cryo-Module

2305

R.G. Eichhorn, J.V. Conway, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, G.H. Hoffstaetter, J.J. Kaufman, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Cornell University has finished building a 10 m long superconducting accelerator module as a prototype of the main linac of a proposed ERL facility. This module houses 6 superconducting cavities- operated at 1.8 K in continuous wave (CW) mode with a design field of 16 MV/m and a Quality factor of 2x10¹⁰. We wil shortly review the design and focus on reporting on the first cool-down of this module. We will giving data for various cool-down scenarios (fast/ slow), uniformity and performance

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR022

ERL Main Linac Cryomodule Cavity Performance and Effect of Thermal Cycling

2312

F. Furuta, J. Dobbins, R.G. Eichhorn, G.M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Cornell has designed, fabricated, and tested a high current (100 mA) CW SRF prototype cryomodule for the future energy-recovery linac (ERL) based synchrotron-light facility at Cornell . It houses six 7-cell SRF cavities with individual HOM absorbers and one magnet/ BPM section. Cavities are targeted to operate with high Qo of 2.0·10¹⁰ at 16.2 MV/m, 1.8 K in continuous wave (CW) mode. We will report the RF test results of 7-cell cavities in this cryomodule after initial cooldown and several thermal cycles with different cooldown method.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW004

Progress in Detector Design and Installation for Measurements of Electron Cloud Trapping in Quadrupole Magnetic Fields at CesrTA

2420

J.A. Crittenden, S. Barrett, M.G. Billing, K.A. Jones, Y. Li, T.I. O'Connell, K. Olear, S. Poprocki, D. L. Rubin, J.P. Sikora
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: Work supported by the US National Science Foundation PHY-1416318, PHY-0734867, PHY-1002467, and the U.S. Department of Energy DE-FC02-08ER41538
Following up on our 2013 and 2014 measurements of electron cloud trapping in a quadrupole magnet with 7.4~T/m gradient in the 5.3~GeV positron storage ring at Cornell University, we have redesigned the shielded-stripline time-resolving electron detector and installed a wide-aperture quadrupole magnet at a location in the ring where its field can be compensated by a nearby quadrupole, thus allowing the first measurements of cloud trapping as a function of field gradient. The transverse acceptance of the electron detector has been tripled, allowing tests of model predictions indicating a dramatic cloud splitting effect which exhibits a threshold behavior as a function of bunch population. In addition, a vacuum chamber optimized for cloud buildup measurements using resonant microwave phenomena has been employed. We describe design considerations and modeling predictions for the upcoming 2016 data-taking run. This project is part of the CESR Test Accelerator program, which investigates performance limitations in low-emittance storage and damping rings.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)