ICALEPCS2011 - List of Authors (Korhonen, T.)

Paper

Title

Page

Beam Synchronous Data Acquisition for SwissFEL Test Injector

180

B. Kalantari, T. Korhonen
Paul Scherrer Institut, 5232 Villigen PSI, Switzerland

Funding: Paul Scherrer Institute
A 250 MeV injector facility at PSI has been constructed to study the scientific and technological challenges of the SwissFEL project. Since in such pulsed machines in principle every beam can have different characteristics, due to varying machine parameters and/or conditions, it is very crucial to be able to acquire and distinguish control system data from one pulse to the next. In this paper we describe the technique we have developed to perform beam synchronous data acquisition at 100 Hz rate. This has been particularly challenging since it has provided us with a reliable and real-time data acquisition method in a non real-time control system. We describe how this can be achieved by employing a powerful and flexible timing system with well defined interfaces to the control system.

Poster MOPKS011 [0.126 MB]

FRBHMULT06

EPICS V4 Expands Support to Physics Application, Data Acsuisition, and Data Analysis

1338

L.R. Dalesio, G. Carcassi, M.A. Davidsaver, M.R. Kraimer, R. Lange, N. Malitsky, G. Shen
BNL, Upton, Long Island, New York, USA
T. Korhonen
Paul Scherrer Institut, 5232 Villigen PSI, Switzerland
J. Rowland
Diamond, Oxfordshire, United Kingdom
M. Sekoranja
Cosylab, Ljubljana, Slovenia
G.R. White
SLAC, Menlo Park, California, USA

Funding: Work supported under auspices of the U.S. Department of Energy under Contract No. DE-AC02-98CH10886 with Brookhaven Science Associates, LLC, and in part by the DOE Contract DE-AC02-76SF00515
EPICS version 4 extends the functionality of version 3 by providing the ability to define, transport, and introspect composite data types. Version 3 provided a set of process variables and a data protocol that adequately defined scalar data along with an atomic set of attributes. While remaining backward compatible, Version 4 is able to easily expand this set with a data protocol capable of exchanging complex data types and parameterized data requests. Additionally, a group of engineers defined reference types for some applications in this environment. The goal of this work is to define a narrow interface with the minimal set of data types needed to support a distributed architecture for physics applications, data acquisition, and data analysis.

Slides FRBHMULT06 [0.188 MB]

TUDAUST03

Control System in SwissFEL Injector Test Facility

593

M. Dach, D. Anicic, D.A. Armstrong, K. Bitterli, H. Brands, P. Chevtsov, F. Haemmerli, M. Heiniger, C.E. Higgs, W. Hugentobler, G. Janser, G. Jud, B. Kalantari, R. Kapeller, T. Korhonen, R.A. Krempaska, M.P. Laznovsky, T. Pal, W. Portmann, D. Vermeulen, E. Zimoch
Paul Scherrer Institut, 5232 Villigen PSI, Switzerland

The Free Electron Laser (SwissFEL) Test Facility is an important milestone for realization of a new SwissFEL facility. The first beam in the Test Facility was produced on the 24th of August 2010 which inaugurated the operation of the Injector. Since then, beam quality in various aspects has been greatly improved. This paper presents the current status of the Test Facility and is focused on the control system related issues which led to the successful commissioning. In addition, the technical challenges and opportunities in view of the future SwissFEL facility are discussed.

Slides TUDAUST03 [3.247 MB]

THDAULT01

Modern System Architectures in Embedded Systems

1260

T. Korhonen
PSI, Villigen, Switzerland

Several new technologies are making their way also in embedded systems. In addition to FPGA technology which has become commonplace, multicore CPUs and I/O virtualization (among others) are being introduced to the embedded systems. In our paper we present our ideas and studies about how to take advantage of these features in control systems. Some application examples involving things like CPU partitioning, virtualized I/O and so an are discussed, along with some benchmarks.

Slides THDAULT01 [1.426 MB]

Paper	Title	Page
MOPKS011	Beam Synchronous Data Acquisition for SwissFEL Test Injector	180
	B. Kalantari, T. Korhonen Paul Scherrer Institut, 5232 Villigen PSI, Switzerland
	Funding: Paul Scherrer Institute A 250 MeV injector facility at PSI has been constructed to study the scientific and technological challenges of the SwissFEL project. Since in such pulsed machines in principle every beam can have different characteristics, due to varying machine parameters and/or conditions, it is very crucial to be able to acquire and distinguish control system data from one pulse to the next. In this paper we describe the technique we have developed to perform beam synchronous data acquisition at 100 Hz rate. This has been particularly challenging since it has provided us with a reliable and real-time data acquisition method in a non real-time control system. We describe how this can be achieved by employing a powerful and flexible timing system with well defined interfaces to the control system.
	Poster MOPKS011 [0.126 MB]

FRBHMULT06	EPICS V4 Expands Support to Physics Application, Data Acsuisition, and Data Analysis	1338
	L.R. Dalesio, G. Carcassi, M.A. Davidsaver, M.R. Kraimer, R. Lange, N. Malitsky, G. Shen BNL, Upton, Long Island, New York, USA T. Korhonen Paul Scherrer Institut, 5232 Villigen PSI, Switzerland J. Rowland Diamond, Oxfordshire, United Kingdom M. Sekoranja Cosylab, Ljubljana, Slovenia G.R. White SLAC, Menlo Park, California, USA
	Funding: Work supported under auspices of the U.S. Department of Energy under Contract No. DE-AC02-98CH10886 with Brookhaven Science Associates, LLC, and in part by the DOE Contract DE-AC02-76SF00515 EPICS version 4 extends the functionality of version 3 by providing the ability to define, transport, and introspect composite data types. Version 3 provided a set of process variables and a data protocol that adequately defined scalar data along with an atomic set of attributes. While remaining backward compatible, Version 4 is able to easily expand this set with a data protocol capable of exchanging complex data types and parameterized data requests. Additionally, a group of engineers defined reference types for some applications in this environment. The goal of this work is to define a narrow interface with the minimal set of data types needed to support a distributed architecture for physics applications, data acquisition, and data analysis.
	Slides FRBHMULT06 [0.188 MB]

TUDAUST03	Control System in SwissFEL Injector Test Facility	593
	M. Dach, D. Anicic, D.A. Armstrong, K. Bitterli, H. Brands, P. Chevtsov, F. Haemmerli, M. Heiniger, C.E. Higgs, W. Hugentobler, G. Janser, G. Jud, B. Kalantari, R. Kapeller, T. Korhonen, R.A. Krempaska, M.P. Laznovsky, T. Pal, W. Portmann, D. Vermeulen, E. Zimoch Paul Scherrer Institut, 5232 Villigen PSI, Switzerland
	The Free Electron Laser (SwissFEL) Test Facility is an important milestone for realization of a new SwissFEL facility. The first beam in the Test Facility was produced on the 24th of August 2010 which inaugurated the operation of the Injector. Since then, beam quality in various aspects has been greatly improved. This paper presents the current status of the Test Facility and is focused on the control system related issues which led to the successful commissioning. In addition, the technical challenges and opportunities in view of the future SwissFEL facility are discussed.
	Slides TUDAUST03 [3.247 MB]

THDAULT01	Modern System Architectures in Embedded Systems	1260
	T. Korhonen PSI, Villigen, Switzerland
	Several new technologies are making their way also in embedded systems. In addition to FPGA technology which has become commonplace, multicore CPUs and I/O virtualization (among others) are being introduced to the embedded systems. In our paper we present our ideas and studies about how to take advantage of these features in control systems. Some application examples involving things like CPU partitioning, virtualized I/O and so an are discussed, along with some benchmarks.
	Slides THDAULT01 [1.426 MB]