ICALEPCS2011 - List of Authors (Chang, Y.-T.)

Paper	Title	Page
MOPMU002	Progress of the TPS Control System Development	425
	J. Chen, Y.-T. Chang, Y.K. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Liao, Y.R. Pan, C.-J. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is a low-emittance 3-GeV synchrotron light source which is in construction on the National Synchrotron Radiation Research Center (NSRRC) campus. The control system for the TPS is based upon EPICS framework. The standard hardware and software components have been defined. The prototype of various subsystems is on going. The event based timing system has been adopted. The power supply control interface accompanied with orbit feedback support have also been defined. The machine protection system is in design phase. Integration with the linear accelerator system which are installed and commissioned at temporary site for acceptance test has already been done. The interface to various systems is still on going. The infrastructures of high level and low level software are on going. Progress will be summarized in the report.

WEPMS013	Timing System of the Taiwan Photon Source	999
	C.Y. Wu, Y.-T. Chang, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Liao NSRRC, Hsinchu, Taiwan
	The timing system of the Taiwan Photon Source provides synchronization for electron gun, modulators of linac, pulse magnet power supplies, booster power supply ramp, bucket addressing of storage ring, diagnostic equipments, beamline gating signal for top-up injection. The system is based on an event distribution system that broadcasts the timing events over a optic fiber network, and decodes and processes them at the timing event receivers. The system supports uplink functionality which will be used for the fast interlock system to distribute signals like beam dump and post-mortem trigger with 10 μsec response time. The hardware of the event system is a new design that is based on 6U CompactPCI form factor. This paper describes the technical solution, the functionality of the system and some applications that are based on the timing system.

WEPMU034	Infrastructure of Taiwan Photon Source Control Network	1145
	Y.-T. Chang, J. Chen, Y.-S. Cheng, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo, C.Y. Wu NSRRC, Hsinchu, Taiwan
	A reliable, flexible and secure network is essential for the Taiwan Photon Source (TPS) control system which is based upon the EPICS toolkit framework. Subsystem subnets will connect to control system via EPICS based CA gateways for forwarding data and reducing network traffic. Combining cyber security technologies such as firewall, NAT and VLAN, control network is isolated to protect IOCs and accelerator components. Network management tools are used to improve network performance. Remote access mechanism will be constructed for maintenance and troubleshooting. The Ethernet is also used as fieldbus for instruments such as power supplies. This paper will describe the system architecture for the TPS control network. Cabling topology, redundancy and maintainability are also discussed.

Paper

Title

Page

Progress of the TPS Control System Development

425

J. Chen, Y.-T. Chang, Y.K. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Liao, Y.R. Pan, C.-J. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is a low-emittance 3-GeV synchrotron light source which is in construction on the National Synchrotron Radiation Research Center (NSRRC) campus. The control system for the TPS is based upon EPICS framework. The standard hardware and software components have been defined. The prototype of various subsystems is on going. The event based timing system has been adopted. The power supply control interface accompanied with orbit feedback support have also been defined. The machine protection system is in design phase. Integration with the linear accelerator system which are installed and commissioned at temporary site for acceptance test has already been done. The interface to various systems is still on going. The infrastructures of high level and low level software are on going. Progress will be summarized in the report.

WEPMS013

Timing System of the Taiwan Photon Source

999

C.Y. Wu, Y.-T. Chang, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.H. Kuo, D. Lee, C.Y. Liao
NSRRC, Hsinchu, Taiwan

The timing system of the Taiwan Photon Source provides synchronization for electron gun, modulators of linac, pulse magnet power supplies, booster power supply ramp, bucket addressing of storage ring, diagnostic equipments, beamline gating signal for top-up injection. The system is based on an event distribution system that broadcasts the timing events over a optic fiber network, and decodes and processes them at the timing event receivers. The system supports uplink functionality which will be used for the fast interlock system to distribute signals like beam dump and post-mortem trigger with 10 μsec response time. The hardware of the event system is a new design that is based on 6U CompactPCI form factor. This paper describes the technical solution, the functionality of the system and some applications that are based on the timing system.

WEPMU034

Infrastructure of Taiwan Photon Source Control Network

1145

Y.-T. Chang, J. Chen, Y.-S. Cheng, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo, C.Y. Wu
NSRRC, Hsinchu, Taiwan

A reliable, flexible and secure network is essential for the Taiwan Photon Source (TPS) control system which is based upon the EPICS toolkit framework. Subsystem subnets will connect to control system via EPICS based CA gateways for forwarding data and reducing network traffic. Combining cyber security technologies such as firewall, NAT and VLAN, control network is isolated to protect IOCs and accelerator components. Network management tools are used to improve network performance. Remote access mechanism will be constructed for maintenance and troubleshooting. The Ethernet is also used as fieldbus for instruments such as power supplies. This paper will describe the system architecture for the TPS control network. Cabling topology, redundancy and maintainability are also discussed.