IBIC2018 - Table of Session: TUOC (Beam position monitors)

Paper	Title	Page
TUOC01	Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra	190
	G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, R. De Monte Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	In this contribution, we describe the advantages of the pilot tone compensation technique that we implemented in a new BPM prototype for Elettra 2.0. Injecting a fixed reference tone upstream of cables allows for a continuous calibration of the system, compensating the different behaviour of every channel due to thermal drifts, variations of cable properties, mismatches and tolerances of components. The system ran successfully as a drop-in substitute for a Libera Electron not only during various machine shifts, but also during a user dedicated beamtime shift for more than 10 hours, behaving in a transparent way for all the control systems and users. The equivalent RMS noise (at 10 kHz data rate) for the pilot tone position was less than 200 nm on a 19 mm vacuum chamber radius, with a long-term stability better than 1 um in a 12-hour window. Two main steps led to this important result: firstly, the development of a novel RF front end that adds the pilot tone to the signals originated by the beam, secondly, the realisation of an FPGA-based double digital receiver that demodulates both beam and pilot amplitudes, calculating the compensated X and Y positions.
	Slides TUOC01 [6.468 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC01
About •	paper received ※ 31 August 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC02	APS Upgrade Integrated Beam Stability Experiments in the APS Storage Ring
	J. Carwardine, N.D. Arnold, R.W. Blake, A.R. Brill, H. Bui, G. Decker, L. Emery, T. Fors, P.S. Kallakuri, R.T. Keane, R.M. Lill, D.R. Paskvan, A.F. Pietryla, N. Sereno, H. Shang, S. Veseli, J. Wang, S. Xu, B.X. Yang ANL, Argonne, Illinois, USA
	Funding: The submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (Argonne) under U.S.Department of Energy Office of Science Contract No. DE-AC02-06CH11357. An ultra-stable orbit will be essential to take advantage of the beam properties of the multi-bend achromat lattice of the APS Upgrade. Transverse beam dimensions are an order of magnitude smaller than for the present APS (14.7 microns x 2.8 microns in flat-beam mode), and consequently orbit stability tolerances are very challenging. The APS upgrade fast orbit feedback system uses a similar architecture to the present orbit feedback system, but while the present system corrects the orbit at 1.6 kHz using 160 bpms and 38 fast correctors per plane, design specifications for APS Upgrade call for orbit correction at 22kHz using 570 rf bpms and 90 photon bpms along with 160 fast correctors per plane. A major focus of the integrated beam stability R&D has been development and test of a prototype fast orbit feedback system using two sectors of the present APS storage ring for demonstration and validation of design parameters. Hardware/firmware implementation is discussed, and we present results from the R&D program covering both orbit correction and feedback control domains, including a novel algorithm that combines orbit correction for both slow and fast correctors down to DC.
	Slides TUOC02 [9.767 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC03	Commissioning of the Open Source Sirius BPM Electronics	196
	S.R. Marques, G.B.M. Bruno, L.M. Russo, H.A. Silva, D.O. Tavarespresenter LNLS, Campinas, Brazil
	The new Brazilian 4th generation light source, Sirius, have already started and commissioning is planned to start in 2018. This paper will report on the manufacturing, deployment and production batch testing of the in-house developed BPM electronics. The latest performance and reliability achievements will be presented.
	Slides TUOC03 [14.606 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC03
About •	paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC04	Development of Beam Position Monitor for the SPring-8 Upgrade	204
	H. Maesaka RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan H. Dewa, T. Fujita, M. Masaki, S. Takano JASRI, Hyogo, Japan
	We are developing a new electron beam position monitor (BPM) system for the low-emittance upgrade of SPring-8. The requirements for the BPM system are: (1) a single-pass resolution of 100 µm rms for a 100 pC bunch and an electric center accuracy of 100 µm rms for the initial beam commissioning to achieve the first turn, (2) a closed-orbit distortion (COD) resolution better than 0.1 µm rms for a 100 mA stored beam and a position stability of less than 5 µm for the ultimate stability of a photon beam axis. We have completed prototypes of a precise button electrode and a BPM block to obtain high-intensity signals and sufficient mechanical accuracy while suppressing high-Q trapped modes leading to impedance and heating issues. The development of readout electronics based on the MTCA.4 standard and the evaluation of radiation-hard coaxial cables have also been conducted. The prototype BPM head was installed in the present SPring-8 storage ring for performance verification with an actual electron beam. We confirmed sufficient signal intensity, electric center accuracy, position stability, etc. by the beam test. The new BPM system is almost ready for the SPring-8 upgrade.
	Slides TUOC04 [2.126 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC04
About •	paper received ※ 06 September 2018 paper accepted ※ 12 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra

190

G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, R. De Monte
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

In this contribution, we describe the advantages of the pilot tone compensation technique that we implemented in a new BPM prototype for Elettra 2.0. Injecting a fixed reference tone upstream of cables allows for a continuous calibration of the system, compensating the different behaviour of every channel due to thermal drifts, variations of cable properties, mismatches and tolerances of components. The system ran successfully as a drop-in substitute for a Libera Electron not only during various machine shifts, but also during a user dedicated beamtime shift for more than 10 hours, behaving in a transparent way for all the control systems and users. The equivalent RMS noise (at 10 kHz data rate) for the pilot tone position was less than 200 nm on a 19 mm vacuum chamber radius, with a long-term stability better than 1 um in a 12-hour window. Two main steps led to this important result: firstly, the development of a novel RF front end that adds the pilot tone to the signals originated by the beam, secondly, the realisation of an FPGA-based double digital receiver that demodulates both beam and pilot amplitudes, calculating the compensated X and Y positions.

Slides TUOC01 [6.468 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC01

About •

paper received ※ 31 August 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC02

APS Upgrade Integrated Beam Stability Experiments in the APS Storage Ring

J. Carwardine, N.D. Arnold, R.W. Blake, A.R. Brill, H. Bui, G. Decker, L. Emery, T. Fors, P.S. Kallakuri, R.T. Keane, R.M. Lill, D.R. Paskvan, A.F. Pietryla, N. Sereno, H. Shang, S. Veseli, J. Wang, S. Xu, B.X. Yang
ANL, Argonne, Illinois, USA

Funding: The submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (Argonne) under U.S.Department of Energy Office of Science Contract No. DE-AC02-06CH11357.
An ultra-stable orbit will be essential to take advantage of the beam properties of the multi-bend achromat lattice of the APS Upgrade. Transverse beam dimensions are an order of magnitude smaller than for the present APS (14.7 microns x 2.8 microns in flat-beam mode), and consequently orbit stability tolerances are very challenging. The APS upgrade fast orbit feedback system uses a similar architecture to the present orbit feedback system, but while the present system corrects the orbit at 1.6 kHz using 160 bpms and 38 fast correctors per plane, design specifications for APS Upgrade call for orbit correction at 22kHz using 570 rf bpms and 90 photon bpms along with 160 fast correctors per plane. A major focus of the integrated beam stability R&D has been development and test of a prototype fast orbit feedback system using two sectors of the present APS storage ring for demonstration and validation of design parameters. Hardware/firmware implementation is discussed, and we present results from the R&D program covering both orbit correction and feedback control domains, including a novel algorithm that combines orbit correction for both slow and fast correctors down to DC.

Slides TUOC02 [9.767 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC03

Commissioning of the Open Source Sirius BPM Electronics

196

S.R. Marques, G.B.M. Bruno, L.M. Russo, H.A. Silva, D.O. Tavarespresenter
LNLS, Campinas, Brazil

The new Brazilian 4th generation light source, Sirius, have already started and commissioning is planned to start in 2018. This paper will report on the manufacturing, deployment and production batch testing of the in-house developed BPM electronics. The latest performance and reliability achievements will be presented.

Slides TUOC03 [14.606 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC03

About •

paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOC04

Development of Beam Position Monitor for the SPring-8 Upgrade

204

H. Maesaka
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
H. Dewa, T. Fujita, M. Masaki, S. Takano
JASRI, Hyogo, Japan

We are developing a new electron beam position monitor (BPM) system for the low-emittance upgrade of SPring-8. The requirements for the BPM system are: (1) a single-pass resolution of 100 µm rms for a 100 pC bunch and an electric center accuracy of 100 µm rms for the initial beam commissioning to achieve the first turn, (2) a closed-orbit distortion (COD) resolution better than 0.1 µm rms for a 100 mA stored beam and a position stability of less than 5 µm for the ultimate stability of a photon beam axis. We have completed prototypes of a precise button electrode and a BPM block to obtain high-intensity signals and sufficient mechanical accuracy while suppressing high-Q trapped modes leading to impedance and heating issues. The development of readout electronics based on the MTCA.4 standard and the evaluation of radiation-hard coaxial cables have also been conducted. The prototype BPM head was installed in the present SPring-8 storage ring for performance verification with an actual electron beam. We confirmed sufficient signal intensity, electric center accuracy, position stability, etc. by the beam test. The new BPM system is almost ready for the SPring-8 upgrade.

Slides TUOC04 [2.126 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUOC04

About •

paper received ※ 06 September 2018 paper accepted ※ 12 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)