| Paper |
Title |
Other Keywords |
Page |
| MOPG28 |
The Brookhaven Linac Isotope Production (BLIP) Facility Raster Scanning System First Year Operation with Beam |
target, linac, instrumentation, laser |
105 |
| |
- R.J. Michnoff, Z. Altinbas, P. Cerniglia, R. Connolly, C. Cullen, C. Degen, R.L. Hulsart, R.F. Lambiase, L.F. Mausner, W.E. Pekrul, D. Raparia, P. Thieberger
BNL, Upton, Long Island, New York, USA
|
|
| |
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Dept. of Energy
Brookhaven National Laboratory's BLIP facility produces radioisotopes for the nuclear medicine community and industry, and performs research to develop new radioisotopes desired by nuclear medicine investigators. A raster scanning system was recently completed in December 2015 and fully commissioned in January 2016 to provide improved beam distribution on the targets, allow higher beam intensities, and ultimately increase production yield of the isotopes. The project included the installation of horizontal and vertical dipole magnets driven at 5 kHz with 90 deg phase separation to produce a circular beam raster pattern, a beam interlock system, and several instrumentation devices including multi-wire profile monitors, a laser profile monitor, beam current transformers and a beam position monitor. The first year operational experiences will be presented.
|
|
|
Poster MOPG28 [39.944 MB]
|
|
| DOI • |
reference for this paper
※ DOI:10.18429/JACoW-IBIC2016-MOPG28
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| TUPG79 |
LANSCE Isotope Production Facility Emittance Measurement System |
emittance, controls, diagnostics, hardware |
548 |
| |
- J.D. Sedillo, D. Baros, J.F. O'Hara, L. Rybarcyk, R.A. Valicenti, H.A. Watkins
LANL, Los Alamos, New Mexico, USA
|
|
| |
A new beam diagnostic system for emittance measurement is under development for the Isotope Production Facility (IPF) beamline located at the Los Alamos Neutron Science Center (LANSCE). This system consists of two axes; each composed of a harp and slit actuation system for measuring the emittance of 41, 72, and 100-MeV proton beam energies. System design details and project status will be discussed with installation and commissioning of this system scheduled to conclude by February 2017.
|
|
| DOI • |
reference for this paper
※ DOI:10.18429/JACoW-IBIC2016-TUPG79
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| WEPG31 |
Upgrades to the LANSCE Isotope Production Facilities Beam Diagnostics |
electronics, diagnostics, data-acquisition, target |
690 |
| |
- H.A. Watkins, D. Baros, D. Martinez, L. Rybarcyk, J.D. Sedillo, R.A. Valicenti
LANL, Los Alamos, New Mexico, USA
|
|
| |
Funding: Work supported by the U.S. Department of Energy. Contract No. DE-AC52-06NA25396
The Los Alamos Neutron Science Center (LANSCE) is currently upgrading the beam diagnostics capability for the Isotope Production Facility (IPF) as part of an Accelerator Improvement Project (AIP). Improvements to measurements of: beam profile, beam energy, beam current and collimator charge are under development. Upgrades include high density harps, emittance slits, wire-scanners, multi-segment adjustable collimator, data acquisition electronics and motion control electronics. These devices will be installed and commissioned for the 2017 run cycle. Details of the hardware design and system development are presented.
|
|
|
|
Poster WEPG31 [3.875 MB]
|
|
| DOI • |
reference for this paper
※ DOI:10.18429/JACoW-IBIC2016-WEPG31
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |