HB2018 - List of Authors (Xu, S.Y.)

Paper	Title	Page
TUA1WD03	Commissioning Status and Plans of CSNS/RCS	133
	S.Y. Xu, Y.W. An, J. Chen, M.Y. Huang, H.F. Ji, Y. Li, S. Wang IHEP, Beijing, People's Republic of China X.H. Lu CSNS, Guangdong Province, People's Republic of China
	The China Spallation Neutron Source (CSNS) is an accelerator-based science facility. CSNS is designed to accelerate proton beam pulses to 1.6 GeV kinetic energy, striking a solid metal target to produce spallation neutrons. CSNS has two major accelerator systems, a linear accelerator (80 MeV Linac) and a 1.6 GeV rapid cycling synchrotron (RCS). The Beam commissioning of CSNS has been commissioned recently. Beam had been accelerated to 61 MeV at CSNS/Linac on April 24, 2017, and 1.6 GeV acceleration at CSNS/RCS was successfully accomplished on July 7, 2017 with the injection energy of 61 MeV. Beam had been accelerated to 80 MeV at CSNS/Linac on January 6, 2018, and 1.6 GeV acceleration at CSNS/RCS was successfully accomplished on January 18, 2018 with the injection energy of 80 MeV. The initial machine parameter tuning and various beam studies were completed. In this paper, the commissioning experiences are introduced.
	Slides TUA1WD03 [10.794 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-TUA1WD03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO017	Study on the Leakage Fields of the Septum and Lambertson Magnets during the Beam Commissioning	303
	M.Y. Huang, S. Wang, S.Y. Xu IHEP, Beijing, People's Republic of China
	For China Spallation Neutron Source (CSNS), the septum magnets are the key part of the injection system and the lambertson magnet is the key part of the extraction system. If the leakage fields of the septum and lambertson magnets are large enough, the circular beam orbit of Rapid Cycling Synchrotron (RCS) would be affected. In this paper, during the beam commissioning, the leakage fields of the septum and lambertson magnets will be studied and their effects on the circular beam orbit will be given and discussed.
	Poster WEP2PO017 [0.852 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO018	Magnetic Field Tracking at CSNS/RCS	306
	S.Y. Xu, S. Fu IHEP, Beijing, People's Republic of China
	Because of the differences of magnetic saturation and eddy current effects between different magnets, magnetic field tracking errors between different magnets is larger than 2.5 % at the Rapid Cycling Synchrotron (RCS) of Chinese Spallation Neutron Source (CSNS), and the induced tune shift is larger than 0.1. So larger tune shift may lead the beam to pass through the resonance lines. To reduce the magnetic field tracking errors, a method of wave form compensation for magnets of the Rapid Cycling Synchrotron was investigated on the magnets of CSNS/RCS. The wave form compensation was applied to CSNS/RCS commissioning. By performing wave form compensation, the maximum magnetic field tracking error was reduced from 2.5 % to 0.08 %, and the maximum tune shift over the ramping process was reduced from 0.1 to 0.004.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO022	Study on the Phase Space Painting Injection during the Beam Commissioning for CSNS	309
	M.Y. Huang, S. Wang, S.Y. Xu IHEP, Beijing, People's Republic of China
	During the beam commissioning of China Spallation Neutron Source (CSNS), different injection methods were used in different periods. In the early stage, since the precise position of the injection point was unknown and the beam power was relatively small, the fixed point injection was selected. In the later period, in order to increase the beam power and reduce the beam loss, the phase space painting method was used. In this paper, the phase space painting in the horizontal and vertical planes is studied in detail and the beam commissioning results of different painting injection are given and discussed. In addition, the different injection effects of the fixed point injection and painting injection are compared and studied.
	Poster WEP2PO022 [0.708 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO023	Timing Adjustment of Eight Kickers and a Method to Calibrate the Kicker Current Curves During the Beam Commissioning for CSNS	312
	M.Y. Huang, D.P. Jin, L. Shen, S. Wang, S.Y. Xu, P. Zhu IHEP, Beijing, People's Republic of China
	The extraction system is a key part of the China Spallation Neutron Source (CSNS) accelerator. It consists of two kinds of magnets: eight kickers and one lambertson. During the beam commissioning, the timing adjustment of eight kickers is a very important problem. In the paper, the methods to adjust the timing of eight kickers will be studied and applied to the beam commissioning. Then, the best method to adjust the timing of eight kickers will be given and used for a long time in the future.
	Poster WEP2PO023 [1.027 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Commissioning Status and Plans of CSNS/RCS

133

S.Y. Xu, Y.W. An, J. Chen, M.Y. Huang, H.F. Ji, Y. Li, S. Wang
IHEP, Beijing, People's Republic of China
X.H. Lu
CSNS, Guangdong Province, People's Republic of China

The China Spallation Neutron Source (CSNS) is an accelerator-based science facility. CSNS is designed to accelerate proton beam pulses to 1.6 GeV kinetic energy, striking a solid metal target to produce spallation neutrons. CSNS has two major accelerator systems, a linear accelerator (80 MeV Linac) and a 1.6 GeV rapid cycling synchrotron (RCS). The Beam commissioning of CSNS has been commissioned recently. Beam had been accelerated to 61 MeV at CSNS/Linac on April 24, 2017, and 1.6 GeV acceleration at CSNS/RCS was successfully accomplished on July 7, 2017 with the injection energy of 61 MeV. Beam had been accelerated to 80 MeV at CSNS/Linac on January 6, 2018, and 1.6 GeV acceleration at CSNS/RCS was successfully accomplished on January 18, 2018 with the injection energy of 80 MeV. The initial machine parameter tuning and various beam studies were completed. In this paper, the commissioning experiences are introduced.

Slides TUA1WD03 [10.794 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-TUA1WD03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO017

Study on the Leakage Fields of the Septum and Lambertson Magnets during the Beam Commissioning

303

M.Y. Huang, S. Wang, S.Y. Xu
IHEP, Beijing, People's Republic of China

For China Spallation Neutron Source (CSNS), the septum magnets are the key part of the injection system and the lambertson magnet is the key part of the extraction system. If the leakage fields of the septum and lambertson magnets are large enough, the circular beam orbit of Rapid Cycling Synchrotron (RCS) would be affected. In this paper, during the beam commissioning, the leakage fields of the septum and lambertson magnets will be studied and their effects on the circular beam orbit will be given and discussed.

Poster WEP2PO017 [0.852 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO018

Magnetic Field Tracking at CSNS/RCS

306

S.Y. Xu, S. Fu
IHEP, Beijing, People's Republic of China

Because of the differences of magnetic saturation and eddy current effects between different magnets, magnetic field tracking errors between different magnets is larger than 2.5 % at the Rapid Cycling Synchrotron (RCS) of Chinese Spallation Neutron Source (CSNS), and the induced tune shift is larger than 0.1. So larger tune shift may lead the beam to pass through the resonance lines. To reduce the magnetic field tracking errors, a method of wave form compensation for magnets of the Rapid Cycling Synchrotron was investigated on the magnets of CSNS/RCS. The wave form compensation was applied to CSNS/RCS commissioning. By performing wave form compensation, the maximum magnetic field tracking error was reduced from 2.5 % to 0.08 %, and the maximum tune shift over the ramping process was reduced from 0.1 to 0.004.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO022

Study on the Phase Space Painting Injection during the Beam Commissioning for CSNS

309

M.Y. Huang, S. Wang, S.Y. Xu
IHEP, Beijing, People's Republic of China

During the beam commissioning of China Spallation Neutron Source (CSNS), different injection methods were used in different periods. In the early stage, since the precise position of the injection point was unknown and the beam power was relatively small, the fixed point injection was selected. In the later period, in order to increase the beam power and reduce the beam loss, the phase space painting method was used. In this paper, the phase space painting in the horizontal and vertical planes is studied in detail and the beam commissioning results of different painting injection are given and discussed. In addition, the different injection effects of the fixed point injection and painting injection are compared and studied.

Poster WEP2PO022 [0.708 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP2PO023

Timing Adjustment of Eight Kickers and a Method to Calibrate the Kicker Current Curves During the Beam Commissioning for CSNS

312

M.Y. Huang, D.P. Jin, L. Shen, S. Wang, S.Y. Xu, P. Zhu
IHEP, Beijing, People's Republic of China

The extraction system is a key part of the China Spallation Neutron Source (CSNS) accelerator. It consists of two kinds of magnets: eight kickers and one lambertson. During the beam commissioning, the timing adjustment of eight kickers is a very important problem. In the paper, the methods to adjust the timing of eight kickers will be studied and applied to the beam commissioning. Then, the best method to adjust the timing of eight kickers will be given and used for a long time in the future.

Poster WEP2PO023 [1.027 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-WEP2PO023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)