FEL2017 - Classification: Electron Guns, RF, Lasers, Cathodes

Paper	Title	Page
WEA01	European XFEL Injector Commissioning Results	389
	B. Beutner DESY, Hamburg, Germany
	In the first commissioning phase of the European XFEL SASE FEL driver linac, we demonstrated the design goals for the injector section. These goals include reliable operation of sub-systems and feasible beam parameters like emittance and bunch length of the beam produced by the RF gun. Of particular interest is the operation of long bunch trains with up to 2700 bunches with a 4.5 MHz repetition rate. In this presentation we will provide an overview of our experiences from the injector commissioning run including beam dynamics studies, diagnostics, and system performance.
	Slides WEA01 [4.633 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA02	Model of Photocathode for CW Electron Gun	394
	P.W. Huang, W.-H. Huang, C.-X. Tang TUB, Beijing, People's Republic of China
	Most of the proposed CW guns for free electron lasers use semiconductors as the photocathode due to their high quantum efficiency and potentially low thermal emittance. We manage to establish a model to explain the photoemission of semiconductors with incident photon energy above or below the theoretical threshold and derive the expression for quantum efficiency and thermal emittance. For the incident photon energy near or below the threshold of the cathode, things will be subtle and we should be careful to consider the details we used to neglect. The results of quantum efficiency and thermal emittance agree well with the published work. We also focus on the degradation of the semiconductors and propose a model to examine the development of the thermal emittance. We mainly consider the effect brought by the surface reactions with poisoning gases. The variation of quantum efficiency with time is well-consistent with experiment data. We also present the calculated results of thermal emittance, showing a decline with time. Similar results are presented with typical value of electric field in DC gun and RF gun.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA03	Simulation Optimization of DC-SRF Photoinjector for Low-Emittance Electron Beam Generation
	K.X. Liu, J.E. Chen, W. Cheng, L.W. Feng, J.K. Hao, S. Huang, L. Lin, W. Qin, S.W. Quan, F. Wang, H.M. Xie, F. Zhu PKU, Beijing, People's Republic of China
	A DC and superconducting rf (SRF) combined photoinjector, DC-SRF photoinjector, has been developed at Peking University to generate high repetition-rate electron bunches. At present stable operation of the DC-SRF photoinjector has been realized and the electron beam has been delivered to a SRF linac with two 9-cell TESLA-type cavities for further acceleration and experiments. Here we will present our latest progress on the DC-SRF photoinjector. We will also present our recent simulation work to decrease the emittance. The purpose is to build an upgraded DC-SRF photoinjector capable of driving CW X-ray free-electron lasers.
	Slides WEA03 [6.287 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA04	Novel Concepts of a High-Brightness Photoinjector RF Gun	397
	S.V. Kuzikov, O.A. Ivanov, A.A. Vikharev, A.L. Vikharev IAP/RAS, Nizhny Novgorod, Russia S.P. Antipov Euclid Beamlabs LLC, Bolingbrook, USA S.P. Antipov Euclid TechLabs, LLC, Solon, Ohio, USA
	We propose here a program to design and manufacture a high performance, advanced source of electrons having high beam brightness (>10¹⁶ A/m²) and high bunch charge (~100 pC). Three innovations are being considered: 1) the use of a high peak cathode field, short-pulse RF gun; 2) the use of multi-layered diamond photocathode at low temperature; and 3) the utilization of THz ultrafast field emission gating. High peak cathode field is necessary to achieve a high brightness (low emittance) beam to be accelerated to relativistic energies before space-charge effects lengthen the bunch. The multilayered diamond photocathode is needed to obtain high QE with long wavelength laser in the first doped layer, beam cooling in the next layer, and negative electron affinity at the emission layer. High field single cycle THz pulses, produced by means of laser light rectification in a nonlinear crystal, allow to avoid a UV laser, provide high field emission charge (up to nC) and ~1 GV/m pre-acceleration of subpicosecond bunches.
	Slides WEA04 [4.039 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA04
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA05	Higher Fields and Beam Energies in Continuous-Wave Room-Temperature VHF RF Guns	401
	F. Sannibale, J.M. Byrd, D. Filippetto, M.J. Johnson, D. Li, T.H. Luo, C.E. Mitchell, J.W. Staples, S.P. Virostek LBNL, Berkeley, California, USA
	Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231 The development in the last decade of MHz-class repetition rate free electron lasers (FELs), and ultrafast electron diffraction and microscopy (UED/UEM) applications, required new gun schemes capable of generating high-brightness beams at such high rates. The VHF-Gun, a 186 MHz room-temperature continuous-wave RF photogun developed at the Lawrence Berkeley Lab (LBNL) was an answer to that need. The VHF-Gun was constructed and tested in the APEX facility at LBNL successfully demonstrating all design parameters and the generation of FEL-quality electron beams. A close version of the APEX gun is in the final phase of fabrication at LBNL to operate as the electron source for the LCLS-II, the new SLAC X-ray FEL. The recently approved upgrade of the LCLS-II towards higher energies (LCLS-II HE) and the brightness-dependent UED and UEM applications would greatly benefit from an increased brightness of the electron source. Such performance upgrade can be obtained by increasing the electric field at the cathode and the beam energy at the gun exit. In this paper, we present and discuss possible upgrade options that would allow us to extend the VHF-Gun technology towards these new goals.
	Slides WEA05 [4.320 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA05
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP003	Update on the Lifetime of Cs2Te Photocathodes Operated at FLASH	415
	S. Schreiber, S. Lederer DESY, Hamburg, Germany P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy
	The photoinjector of the free-electron laser facility FLASH at DESY (Hamburg, Germany) uses Cs2Te photocathodes. We report on an update of the lifetime and quantum efficiency of cathodes operated at FLASH during the last years.
	Poster WEP003 [0.286 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP004	Calculations for a THz SASE FEL Based on the Measured Electron Beam Parameters at PITZ	419
	P. Boonpornprasert, M. Krasilnikov, F. Stephan DESY Zeuthen, Zeuthen, Germany
	The Photo Injector Test facility at DESY, Zeuthen site (PITZ), develops high brightness electron sources for modern linac-based Free Electron Lasers (FELs). The PITZ accelerator can also be considered as a suitable machine for the development of an IR/THz source prototype for pump-probe experiments at the European XFEL. Calculations of THz radiation by means of a SASE FEL based on the simulated and the measured beam profiles at PITZ for the radiation wavelength of 100 microns were performed by using the GENESIS1.3 code. The results of these simulations are presented and discussed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP005	Coaxial Coupler RF Kick in the PITZ RF Gun	422
	Y. Chen, P. Boonpornprasert, J.D. Good, H. Huck, I.I. Isaev, M. Krasilnikov, A. Oppelt, H.J. Qian, Y. Renier, F. Stephan DESY Zeuthen, Zeuthen, Germany W. Ackermann, H. De Gersem TEMF, TU Darmstadt, Darmstadt, Germany M. Dohlus DESY, Hamburg, Germany Q.T. Zhao IMP/CAS, Lanzhou, People's Republic of China
	We investigate a transverse RF kick induced by the transition between rectangular waveguide and coaxial line of the RF coupler in the 1.6-cell L-band normal conducting (NC) RF gun at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). A three-dimensional electromagnetic simulation shows the disturbed RF field distributions in the fundamental accelerating mode. Based on the 3D RF field map, an electron beam based characterization and quantification of the coaxial coupler RF kick in the PITZ gun is simulated. Preliminary results of the investigations are presented.
	Poster WEP005 [1.345 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP006	Preliminary On-Table and Photoelectron Results from the PITZ Quasi-Ellipsoidal Photocathode Laser System	426
	J.D. Good, G. Asova, P. Boonpornprasert, Y. Chen, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, T. Rublack, F. Stephan DESY Zeuthen, Zeuthen, Germany A.V. Andrianov, E. Gacheva, E. Khazanov, S. Mironov, A. Poteomkin, V. Zelenogorsky IAP/RAS, Nizhny Novgorod, Russia I. Hartl, S. Schreiber DESY, Hamburg, Germany E. Syresin JINR, Dubna, Moscow Region, Russia
	The optimization of photoinjectors is crucial for the successful operation of linac-based free electron lasers, and beam dynamics simulations have shown that ellipsoidal photocathode laser pulses result in significantly lower electron beam emittance than that of conventional cylindrical pulses. Therefore, in collaboration with the Institute of Applied Physics (Nizhny Novgorod, Russia) and the Joint Institute of Nuclear Research (Dubna, Russia), a laser system capable of generating quasi-ellipsoidal laser pulses has been developed and installed at the Photo Injector Test facility at DESY, Zeuthen site (PITZ). The pulse shaping has been realized using the spatial light modulator technique, characterized by cross-correlation and spectrographic measurements, and is demonstrated with electron beam measurements. In this contribution the overall setup, operating principles, and results of first regular electron beam measurements will be presented together with corresponding beam dynamics simulations. Furthermore, the numerous improvements of the simplified re-design currently under construction shall be detailed.
	Poster WEP006 [1.766 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP007	Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ	429
	M. Krasilnikov, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, F. Stephan, Q.T. Zhao DESY Zeuthen, Zeuthen, Germany G.A. Amatuni, B. Grigoryan CANDLE SRI, Yerevan, Armenia G. Asova INRNE, Sofia, Bulgaria Q.T. Zhao IMP/CAS, Lanzhou, People's Republic of China
	The electron beam asymmetry observed at the Photo Injector Test Facility at DESY in Zeuthen (PITZ) was traced back to multipole kicks in the gun section, namely around the location of the coaxial power coupler and the main solenoid. Several dedicated studies have been performed to quantify the kick location and strength. Based on these studies, two designs of correction quadrupole coils were proposed. The coils were fabricated and tested with an electron beam. The second updated design implies a two quadrupole setup on a frame installed around the gun coaxial coupler close to the main solenoid centre location. Skew and normal quadrupole magnets are powered independently, enabling flexibility in electron beam manipulations. By means of this setup, a more symmetric beam was obtained at several screens. This led also to more equal measured horizontal and vertical phase spaces and to even smaller overall emittance values. Some details of the gun quadrupole designs, magnetic measurements, and results of electron beam measurements including emittance optimization will be reported.
	Poster WEP007 [1.997 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP008	Beam Brightness Improvement by Ellipsoidal Laser Shaping for CW Photoinjectors	432
	H.J. Qian, M. Krasilnikov, F. Stephan DESY Zeuthen, Zeuthen, Germany
	High-brightness photoinjectors operating in a continuous wave (CW) mode are required for many advanced applications, such as CW X-ray FEL, ERL light source, electron coolers for hadron beams and electron-ion colliders and so on. Now, three types of CW electron guns are available: DC gun, SRF gun and normal conducting RF gun, which are under intense development in different institutes based on local expertise and application demands. Compared to pulsed guns, both beam energy and brightness from CW guns are compromised due to a lower acceleration gradient. Flattop laser shaping has been applied in both pulsed and CW guns to improve beam emittance. In this paper, ellipsoidal laser shaping is applied in CW photoinjectors to improve beam brightness, and preliminary ASTRA simulations are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP009	A Cryocooled Normal-Conducting and Superconducting Hybrid CW Photoinjector	436
	H.J. Qian, M. Krasilnikov, F. Stephan DESY Zeuthen, Zeuthen, Germany
	Continuous wave (CW) photoinjectors have seen great progress in the last decades, such as DC gun, SRF gun and normal conducting VHF-band RF gun. New developments of CW guns are aiming higher acceleration gradient and beam energy for higher-beam brightness. One of the technical challenges for CW SRF guns is the compatibility of normal-conducting high QE cathodes and superconducting cavity. In this paper, a high gradient cryocooled CW normal-conducting gun is proposed to house the high QE cathode, and a SRF cavity nearby gives further energy acceleration. Preliminary ASTRA simulations of such a hybrid photoinjector are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP009
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP010	Beam Asymmetry Studies with Quadrupole Field Errors in the PITZ Gun Section	440
	Q.T. Zhao, G. Asova, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, T. Rublack, C. Saisa-ard, F. Stephan DESY Zeuthen, Zeuthen, Germany G. Asova INRNE, Sofia, Bulgaria C. Saisa-ard Chiang Mai University, Chiang Mai, Thailand Q.T. Zhao IMP/CAS, Lanzhou, People's Republic of China
	The Photo Injector Test Facility at DESY in Zeuthen (PITZ) was built to test and optimize high-brightness electron sources for free electron lasers (FELs) like FLASH and European XFEL. Although the beam emittance has been optimized and experimentally demonstrated to meet the requirements of FLASH and XFEL, transverse beam asymmetries, such as wing structures and beam tilts, were observed during many years of operation with different generations of guns. These cannot be explained by simulations with the rotationally symmetric gun cavities and symmetric solenoid fields. Based on previous RF coupler kick, solenoid field imperfection studies and coupling beam dynamics, the beam asymmetries most probably stem from rotated quadrupole field error in the gun section. A thin-lens static quadrupole model is applied in the RF gun section simulations to fit the position and intensity of quadrupole field errors by comparing the beam asymmetry directions in experiments and ASTRA simulations. Furthermore, by measuring the laser position movement at the photo cathode and the corresponding beam movement at downstream screens, the integrated quadrupole field strength can also be extracted.
	Poster WEP010 [1.856 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP012	A 2.45 GHz Photoinjector Gun for an FEL Driven by Laser Wakefield Accelerated Beam	444
	S.V. Kuzikov, S.A. Bogdanov, E. Gacheva, E.V. Ilyakov, D.S. Makarov, S. Mironov, A. Poteomkin, A. Shkaev, A.A. Vikharev IAP/RAS, Nizhny Novgorod, Russia
	Funding: This work was supported by the Russian Scientific Foundation (grant #16-19-10448). The photoinjector of short electron bunches is a key element of investigations aimed on particle acceleration by pulses of the subpetawatt laser PEARL (10 J, 50-70 fs). The projected parameters of the photoinjector are an electron energy level of 5 MeV, a charge > 0.1 nC, a bunch length of about 3 mm, a transversal emittance no worse than 1 mm*mrad, and an energy spread no more than ~0.1%. The photoinjector is based on klystron KIU-111 at frequency 2.45 GHz, produced by company Toriy (output power ~ 5 MW, pulse length ~ 7 mcs, efficiency ~ 44%, power gain ~ 50 dB). It is proposed to use this klystron in order to feed the accelerating resonator of the classical design consisted of 1.5 cells in which the photocathode is inserted. On a base of third harmonics of a Ti:Sa laser, we plan to produce picosecond pulses of no less than 100 mcJ in energy. The photocathode is planned to be made of CVD diamond film which is not critical to vacuum degree and surface contamination, has high QE, a long lifetime, and is capable of being used with cheap, long wavelength optical lasers.
	Poster WEP012 [1.194 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP014	Pulse Duration Measurement of Pico-second DUV Photocathode Driving Laser by Autocorrelation Technique Using Two-Photon Absorption in Bulk Material	447
	H. Zen, T. Kii, K. Masuda, T. Nakajima, H. Ohgaki Kyoto University, Kyoto, Japan
	A multi-bunch, pico-second DUV photocathode drive laser system has been developed for photocathode operation of mid-infrared free electron laser facility, KU-FEL.* By using the laser, KU-FEL has already succeeded in first lasing under the photocathode operation. The pulse duration of the photocathode driving laser is a quite important parameter because it determines the initial electron pulse duration on the cathode surface. However, the pulse duration of the photocathode driving laser had not been characterized. A very convenient pulse duration measurement method utilizing two-photon absorption in bulk material, which can be used for DUV laser pulses, has been proposed and demonstrated so far.* In this study, a DUV nonlinear autocorrelator based on the proposed method was developed to measure the pulse duration of the DUV photocathode driving laser. As the result of measurement, the pulse duration was evaluated as 5.8±0.2 ps (FWHM). The principle of this method, experimental setup and measured results will be presented. * H. Zen et al., Proc. of FEL2014, pp.828-831 (2015). H. Zen et al., Proc. of IPAC2016, pp.754-756 (2016). * C. Homann et al., Applied Physics B 104, 783 (2011).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP014
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP015	Current Experimental Work with Diamond Field-Emitter Array Cathodes	450
	H.L. Andrews, R.L. Fleming, J.W. Lewellen, K.E. Nichols, D.Y. Shchegolkov, E.I. Simakov LANL, Los Alamos, New Mexico, USA B.K. Choi Vanderbilt University, Nashville, USA
	Funding: We gratefully acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program for this work. Diamond Field-Emitter Array (DFEA) cathodes are arrays of micron-scale diamond pyramids with nanometer-scale tips, thereby providing high emission currents with small emittance and energy spread. To date they have been demonstrated in a close-diode configuration, spaced only a few hundred microns from a solid anode, and have shown very promising results in terms of emittance, energy spread, and per-tip emission currents. We present recent results investigating DFEA performance in a large-gap configuration, such that the cathodes are a few millimeters from a solid anode, and show that performance is the same or better as the close-diode geometry previously studied. However, array performance is still limited by anode damage. We are redesigning our cathode test stand to overcome the inherent limitations of a solid anode, allow for transport of the emitted beam, and further explore real-world DFEA performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP016	Modeling of Diamond Field-Emitter Arrays for High-Brightness Photocathode Applications	454
	C. Huang, H.L. Andrews, B.K. Choi, R.L. Fleming, T.J. Kwan, J.W. Lewellen, D.C. Nguyen, K.E. Nichols, V.N. Pavlenko, A. Piryatinski, D.Y. Shchegolkov, E.I. Simakov LANL, Los Alamos, New Mexico, USA
	Funding: Work performed under the auspices of the U.S. DOE by the LANS, LLC, Los Alamos National Laboratory (LANL) under Contract No. DE-AC52-06NA25396. Work supported by the LDRD program at LANL. Dielectric Laser Accelerator (DLA) is capable of generating high output power for an X-ray free-electron laser (FEL), while having a size 1-2 orders of magnitude smaller than existing Radio-Frequency (RF) accelerators. Single Diamond Field-Emitter (DFE) or array of such emitters (DFEA) can be employed as high-current ultra-low-emittance photocathodes for compact DLAs. We are developing a first principle semi-classical Monte-Carlo (MC) emission model for DFEAs that includes the effects of carriers' photoexcitation, their transport to the emitter surface, and the tunnelling through the surface. The electronic structure size quantization affecting the transport and tunnelling processes within the sharp diamond tips is also accounted for. These aspects of our model and their implementation and validation, as well as macroscopic electromagnetic beam simulation of DFE are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP018	Electron Beam Heating with the European XFEL Laser Heater	458
	M. Hamberg Uppsala University, Uppsala, Sweden F. Brinker, I. Hartl, S. Koehler, B. Manschwetus, M. Scholz, L. Winkelmann DESY, Hamburg, Germany
	Funding: Work supported by Swedish Research council, Sweden, Olle Engkvist foundation and DESY, Hamburg, Germany. The commissioning of the European XFEL is ongoing. To reduce unwanted longitudinal micro-bunching effects, a laser heater is implemented. Here we present the first heating steps and commissioning of the laser heater at the injector section.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP019	High Stable Pulse Modulator for PAL-XFEL*	460
	S.S. Park, H.-S. Kang, S.H. Kim, H.-S. Lee PAL, Pohang, Kyungbuk, Republic of Korea
	Funding: Work supported by Ministry of Science, ICT(Information/Communication Technology) and Future Planning. The XFEL of Pohang Accelerator Laboratory (PAL) commissioned the 10 GeV PAL-XFEL project in 2015. The PAL-XFEL needs a highly-stable electron beam. The very stable beam voltage of a klystron-modulator is essential to provide the stable acceleration field for an electron beam. Thus, the modulator system for the XFEL requires less than 50 ppm PFN voltage stability. To get this high stability on the modulator system, the HVPS of inverter type is an important component. The modulator also needs lower noise and more smart. In this paper, we will discuss the design and the test results of the high-stability pulse modulator system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP021	Preliminary Results of the Dark Current Modelling for the Polfel Superconducting Lead Photocathode	463
	K. Szymczyk, J.A. Lorkiewicz, R. Nietubyć NCBJ, Świerk/Otwock, Poland J.K. Sekutowicz DESY, Hamburg, Germany
	Preparation for the construction of Polish Free Electron Laser (POLFEL) will begin shortly at National Centre for Nuclear Research (NCBJ) in Warsaw. POLFEL is planned as a fourth-generation light source driven by a superconducting (sc) electron accelerator. The concept includes an all-superconducting injector with a thin-film lead sc photocathode, dedicated to continuous wave or long-pulse linac operation. One of the issues which emerges in connection with operation of high-gradient electron guns furnished with dismountable photocathode plugs is the dark current emitted from the cathode surface inhomogeneities. The dark current usually degrades accelerator performance. The purpose of this paper is to present preliminary investigation results of the dark current generation in the electron gun with a thin lead layer deposited on a niobium plug. Specific features of geometric configuration like rounded plug edges, a gap between the plug and the back gun wall as well as cathode surface roughness have been taken into account for the electron field emission and RF field calculations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP024	Design and Research of a Micro-Pulse Electron Gun	466
	D.Y. Yang, B.T. Li, X.Y. Lu, W.W. Tan, L. Xiao, Y. Yang, Z.Q. Yang, J. Zhao PKU, Beijing, People's Republic of China K. Zhou CAEP/IAE, Mianyang, Sichuan, People's Republic of China
	Micro-pulse electron gun (MPG) is a novel electron source which can produce narrow-pulse, high-repetition rate electron current. Theoretical and experiment work have been done to study physical properties and steady operating conditions of MPG. Proof-of-principle work has been finished and the next work is to research the parameters of the MPG electron beam and master the MPG work property deeply. Thus, a high voltage accelerating platform which can supply 100 kV direct voltage was designed. Furthermore, electromagnetic and mechanism designs were operated to adapt the high voltage platform and measure beam parameters.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP024
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP025	Emittance Measurements from SRF Gun in CeC Accelerator	470
	K. Mihara Stony Brook University, Stony Brook, USA Y.C. Jing, V. Litvinenko, I. Pinayev, G. Wang BNL, Upton, Long Island, New York, USA I. Petrushina SUNY SB, Stony Brook, New York, USA
	Funding: DoE NP office, grant DE-FOA-0000632 and NSF grant PHY-1415252 In this paper we report on extremely good performance of 113 MHz SRF CW gun. This gun is a part of the system built to test coherent electron cooling concept and was aimed to generate trains of 78 kHz pulses with large 1 nC to 5 nC charge per bunch. While it was not built for attaining record low emittances, the machine can achieve very low normalized emittances ~ 0.3 mm mrad with 0.5 nC charge per bunch using CsK2Sb photocathode. In addition to excellent performance, this gun provides for very long lifetime of these high QE photocathodes, with a typical using time of 2 months.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP025
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP026	Inducing Microbunching in the CLARA FEL Test Facility	475
	A.D. Brynes STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	We present simulation studies of the laser heater interaction in the CLARA FEL test facility using a non-uniform laser pulse. The microbunching instability, which manifests itself as correlated energy or density modulations in an electron bunch, can degrade the performance of an FEL. Most x-ray free electron lasers (FELs) utilise a so-called laser heater system to impose a small increase in the uncorrelated energy spread of the bunch at low energy to damp the instability – this technique involves imposing a laser pulse on the bunch while it is propagating through an undulator in a dispersive region. However, if the instability can be controlled, the electron bunch profile can be manipulated, yielding novel applications for the FEL, or for generation of THz radiation. Control of the microbunching instability can be achieved by modulating the intensity profile of the laser heater pulse to impose a non-uniform kick along the electron bunch. We have simulated this interaction for various laser intensity profiles and bunch compression factors.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP026
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

European XFEL Injector Commissioning Results

389

B. Beutner
DESY, Hamburg, Germany

In the first commissioning phase of the European XFEL SASE FEL driver linac, we demonstrated the design goals for the injector section. These goals include reliable operation of sub-systems and feasible beam parameters like emittance and bunch length of the beam produced by the RF gun. Of particular interest is the operation of long bunch trains with up to 2700 bunches with a 4.5 MHz repetition rate. In this presentation we will provide an overview of our experiences from the injector commissioning run including beam dynamics studies, diagnostics, and system performance.

Slides WEA01 [4.633 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA02

Model of Photocathode for CW Electron Gun

394

P.W. Huang, W.-H. Huang, C.-X. Tang
TUB, Beijing, People's Republic of China

Most of the proposed CW guns for free electron lasers use semiconductors as the photocathode due to their high quantum efficiency and potentially low thermal emittance. We manage to establish a model to explain the photoemission of semiconductors with incident photon energy above or below the theoretical threshold and derive the expression for quantum efficiency and thermal emittance. For the incident photon energy near or below the threshold of the cathode, things will be subtle and we should be careful to consider the details we used to neglect. The results of quantum efficiency and thermal emittance agree well with the published work. We also focus on the degradation of the semiconductors and propose a model to examine the development of the thermal emittance. We mainly consider the effect brought by the surface reactions with poisoning gases. The variation of quantum efficiency with time is well-consistent with experiment data. We also present the calculated results of thermal emittance, showing a decline with time. Similar results are presented with typical value of electric field in DC gun and RF gun.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA03

Simulation Optimization of DC-SRF Photoinjector for Low-Emittance Electron Beam Generation

K.X. Liu, J.E. Chen, W. Cheng, L.W. Feng, J.K. Hao, S. Huang, L. Lin, W. Qin, S.W. Quan, F. Wang, H.M. Xie, F. Zhu
PKU, Beijing, People's Republic of China

A DC and superconducting rf (SRF) combined photoinjector, DC-SRF photoinjector, has been developed at Peking University to generate high repetition-rate electron bunches. At present stable operation of the DC-SRF photoinjector has been realized and the electron beam has been delivered to a SRF linac with two 9-cell TESLA-type cavities for further acceleration and experiments. Here we will present our latest progress on the DC-SRF photoinjector. We will also present our recent simulation work to decrease the emittance. The purpose is to build an upgraded DC-SRF photoinjector capable of driving CW X-ray free-electron lasers.

Slides WEA03 [6.287 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA04

Novel Concepts of a High-Brightness Photoinjector RF Gun

397

S.V. Kuzikov, O.A. Ivanov, A.A. Vikharev, A.L. Vikharev
IAP/RAS, Nizhny Novgorod, Russia
S.P. Antipov
Euclid Beamlabs LLC, Bolingbrook, USA
S.P. Antipov
Euclid TechLabs, LLC, Solon, Ohio, USA

We propose here a program to design and manufacture a high performance, advanced source of electrons having high beam brightness (>10¹⁶ A/m²) and high bunch charge (~100 pC). Three innovations are being considered: 1) the use of a high peak cathode field, short-pulse RF gun; 2) the use of multi-layered diamond photocathode at low temperature; and 3) the utilization of THz ultrafast field emission gating. High peak cathode field is necessary to achieve a high brightness (low emittance) beam to be accelerated to relativistic energies before space-charge effects lengthen the bunch. The multilayered diamond photocathode is needed to obtain high QE with long wavelength laser in the first doped layer, beam cooling in the next layer, and negative electron affinity at the emission layer. High field single cycle THz pulses, produced by means of laser light rectification in a nonlinear crystal, allow to avoid a UV laser, provide high field emission charge (up to nC) and ~1 GV/m pre-acceleration of subpicosecond bunches.

Slides WEA04 [4.039 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA04

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA05

Higher Fields and Beam Energies in Continuous-Wave Room-Temperature VHF RF Guns

401

F. Sannibale, J.M. Byrd, D. Filippetto, M.J. Johnson, D. Li, T.H. Luo, C.E. Mitchell, J.W. Staples, S.P. Virostek
LBNL, Berkeley, California, USA

Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231
The development in the last decade of MHz-class repetition rate free electron lasers (FELs), and ultrafast electron diffraction and microscopy (UED/UEM) applications, required new gun schemes capable of generating high-brightness beams at such high rates. The VHF-Gun, a 186 MHz room-temperature continuous-wave RF photogun developed at the Lawrence Berkeley Lab (LBNL) was an answer to that need. The VHF-Gun was constructed and tested in the APEX facility at LBNL successfully demonstrating all design parameters and the generation of FEL-quality electron beams. A close version of the APEX gun is in the final phase of fabrication at LBNL to operate as the electron source for the LCLS-II, the new SLAC X-ray FEL. The recently approved upgrade of the LCLS-II towards higher energies (LCLS-II HE) and the brightness-dependent UED and UEM applications would greatly benefit from an increased brightness of the electron source. Such performance upgrade can be obtained by increasing the electric field at the cathode and the beam energy at the gun exit. In this paper, we present and discuss possible upgrade options that would allow us to extend the VHF-Gun technology towards these new goals.

Slides WEA05 [4.320 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEA05

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP003

Update on the Lifetime of Cs2Te Photocathodes Operated at FLASH

415

S. Schreiber, S. Lederer
DESY, Hamburg, Germany
P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy

The photoinjector of the free-electron laser facility FLASH at DESY (Hamburg, Germany) uses Cs2Te photocathodes. We report on an update of the lifetime and quantum efficiency of cathodes operated at FLASH during the last years.

Poster WEP003 [0.286 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP004

Calculations for a THz SASE FEL Based on the Measured Electron Beam Parameters at PITZ

419

P. Boonpornprasert, M. Krasilnikov, F. Stephan
DESY Zeuthen, Zeuthen, Germany

The Photo Injector Test facility at DESY, Zeuthen site (PITZ), develops high brightness electron sources for modern linac-based Free Electron Lasers (FELs). The PITZ accelerator can also be considered as a suitable machine for the development of an IR/THz source prototype for pump-probe experiments at the European XFEL. Calculations of THz radiation by means of a SASE FEL based on the simulated and the measured beam profiles at PITZ for the radiation wavelength of 100 microns were performed by using the GENESIS1.3 code. The results of these simulations are presented and discussed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP005

Coaxial Coupler RF Kick in the PITZ RF Gun

422

Y. Chen, P. Boonpornprasert, J.D. Good, H. Huck, I.I. Isaev, M. Krasilnikov, A. Oppelt, H.J. Qian, Y. Renier, F. Stephan
DESY Zeuthen, Zeuthen, Germany
W. Ackermann, H. De Gersem
TEMF, TU Darmstadt, Darmstadt, Germany
M. Dohlus
DESY, Hamburg, Germany
Q.T. Zhao
IMP/CAS, Lanzhou, People's Republic of China

We investigate a transverse RF kick induced by the transition between rectangular waveguide and coaxial line of the RF coupler in the 1.6-cell L-band normal conducting (NC) RF gun at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). A three-dimensional electromagnetic simulation shows the disturbed RF field distributions in the fundamental accelerating mode. Based on the 3D RF field map, an electron beam based characterization and quantification of the coaxial coupler RF kick in the PITZ gun is simulated. Preliminary results of the investigations are presented.

Poster WEP005 [1.345 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP006

Preliminary On-Table and Photoelectron Results from the PITZ Quasi-Ellipsoidal Photocathode Laser System

426

J.D. Good, G. Asova, P. Boonpornprasert, Y. Chen, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, T. Rublack, F. Stephan
DESY Zeuthen, Zeuthen, Germany
A.V. Andrianov, E. Gacheva, E. Khazanov, S. Mironov, A. Poteomkin, V. Zelenogorsky
IAP/RAS, Nizhny Novgorod, Russia
I. Hartl, S. Schreiber
DESY, Hamburg, Germany
E. Syresin
JINR, Dubna, Moscow Region, Russia

The optimization of photoinjectors is crucial for the successful operation of linac-based free electron lasers, and beam dynamics simulations have shown that ellipsoidal photocathode laser pulses result in significantly lower electron beam emittance than that of conventional cylindrical pulses. Therefore, in collaboration with the Institute of Applied Physics (Nizhny Novgorod, Russia) and the Joint Institute of Nuclear Research (Dubna, Russia), a laser system capable of generating quasi-ellipsoidal laser pulses has been developed and installed at the Photo Injector Test facility at DESY, Zeuthen site (PITZ). The pulse shaping has been realized using the spatial light modulator technique, characterized by cross-correlation and spectrographic measurements, and is demonstrated with electron beam measurements. In this contribution the overall setup, operating principles, and results of first regular electron beam measurements will be presented together with corresponding beam dynamics simulations. Furthermore, the numerous improvements of the simplified re-design currently under construction shall be detailed.

Poster WEP006 [1.766 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP007

Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ

429

M. Krasilnikov, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, F. Stephan, Q.T. Zhao
DESY Zeuthen, Zeuthen, Germany
G.A. Amatuni, B. Grigoryan
CANDLE SRI, Yerevan, Armenia
G. Asova
INRNE, Sofia, Bulgaria
Q.T. Zhao
IMP/CAS, Lanzhou, People's Republic of China

The electron beam asymmetry observed at the Photo Injector Test Facility at DESY in Zeuthen (PITZ) was traced back to multipole kicks in the gun section, namely around the location of the coaxial power coupler and the main solenoid. Several dedicated studies have been performed to quantify the kick location and strength. Based on these studies, two designs of correction quadrupole coils were proposed. The coils were fabricated and tested with an electron beam. The second updated design implies a two quadrupole setup on a frame installed around the gun coaxial coupler close to the main solenoid centre location. Skew and normal quadrupole magnets are powered independently, enabling flexibility in electron beam manipulations. By means of this setup, a more symmetric beam was obtained at several screens. This led also to more equal measured horizontal and vertical phase spaces and to even smaller overall emittance values. Some details of the gun quadrupole designs, magnetic measurements, and results of electron beam measurements including emittance optimization will be reported.

Poster WEP007 [1.997 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP008

Beam Brightness Improvement by Ellipsoidal Laser Shaping for CW Photoinjectors

432

H.J. Qian, M. Krasilnikov, F. Stephan
DESY Zeuthen, Zeuthen, Germany

High-brightness photoinjectors operating in a continuous wave (CW) mode are required for many advanced applications, such as CW X-ray FEL, ERL light source, electron coolers for hadron beams and electron-ion colliders and so on. Now, three types of CW electron guns are available: DC gun, SRF gun and normal conducting RF gun, which are under intense development in different institutes based on local expertise and application demands. Compared to pulsed guns, both beam energy and brightness from CW guns are compromised due to a lower acceleration gradient. Flattop laser shaping has been applied in both pulsed and CW guns to improve beam emittance. In this paper, ellipsoidal laser shaping is applied in CW photoinjectors to improve beam brightness, and preliminary ASTRA simulations are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP009

A Cryocooled Normal-Conducting and Superconducting Hybrid CW Photoinjector

436

H.J. Qian, M. Krasilnikov, F. Stephan
DESY Zeuthen, Zeuthen, Germany

Continuous wave (CW) photoinjectors have seen great progress in the last decades, such as DC gun, SRF gun and normal conducting VHF-band RF gun. New developments of CW guns are aiming higher acceleration gradient and beam energy for higher-beam brightness. One of the technical challenges for CW SRF guns is the compatibility of normal-conducting high QE cathodes and superconducting cavity. In this paper, a high gradient cryocooled CW normal-conducting gun is proposed to house the high QE cathode, and a SRF cavity nearby gives further energy acceleration. Preliminary ASTRA simulations of such a hybrid photoinjector are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP009

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP010

Beam Asymmetry Studies with Quadrupole Field Errors in the PITZ Gun Section

440

Q.T. Zhao, G. Asova, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, X. Li, O. Lishilin, G. Loisch, D.M. Melkumyan, A. Oppelt, H.J. Qian, Y. Renier, T. Rublack, C. Saisa-ard, F. Stephan
DESY Zeuthen, Zeuthen, Germany
G. Asova
INRNE, Sofia, Bulgaria
C. Saisa-ard
Chiang Mai University, Chiang Mai, Thailand
Q.T. Zhao
IMP/CAS, Lanzhou, People's Republic of China

The Photo Injector Test Facility at DESY in Zeuthen (PITZ) was built to test and optimize high-brightness electron sources for free electron lasers (FELs) like FLASH and European XFEL. Although the beam emittance has been optimized and experimentally demonstrated to meet the requirements of FLASH and XFEL, transverse beam asymmetries, such as wing structures and beam tilts, were observed during many years of operation with different generations of guns. These cannot be explained by simulations with the rotationally symmetric gun cavities and symmetric solenoid fields. Based on previous RF coupler kick, solenoid field imperfection studies and coupling beam dynamics, the beam asymmetries most probably stem from rotated quadrupole field error in the gun section. A thin-lens static quadrupole model is applied in the RF gun section simulations to fit the position and intensity of quadrupole field errors by comparing the beam asymmetry directions in experiments and ASTRA simulations. Furthermore, by measuring the laser position movement at the photo cathode and the corresponding beam movement at downstream screens, the integrated quadrupole field strength can also be extracted.

Poster WEP010 [1.856 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP012

A 2.45 GHz Photoinjector Gun for an FEL Driven by Laser Wakefield Accelerated Beam

444

S.V. Kuzikov, S.A. Bogdanov, E. Gacheva, E.V. Ilyakov, D.S. Makarov, S. Mironov, A. Poteomkin, A. Shkaev, A.A. Vikharev
IAP/RAS, Nizhny Novgorod, Russia

Funding: This work was supported by the Russian Scientific Foundation (grant #16-19-10448).
The photoinjector of short electron bunches is a key element of investigations aimed on particle acceleration by pulses of the subpetawatt laser PEARL (10 J, 50-70 fs). The projected parameters of the photoinjector are an electron energy level of 5 MeV, a charge > 0.1 nC, a bunch length of about 3 mm, a transversal emittance no worse than 1 mm*mrad, and an energy spread no more than ~0.1%. The photoinjector is based on klystron KIU-111 at frequency 2.45 GHz, produced by company Toriy (output power ~ 5 MW, pulse length ~ 7 mcs, efficiency ~ 44%, power gain ~ 50 dB). It is proposed to use this klystron in order to feed the accelerating resonator of the classical design consisted of 1.5 cells in which the photocathode is inserted. On a base of third harmonics of a Ti:Sa laser, we plan to produce picosecond pulses of no less than 100 mcJ in energy. The photocathode is planned to be made of CVD diamond film which is not critical to vacuum degree and surface contamination, has high QE, a long lifetime, and is capable of being used with cheap, long wavelength optical lasers.

Poster WEP012 [1.194 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP014

Pulse Duration Measurement of Pico-second DUV Photocathode Driving Laser by Autocorrelation Technique Using Two-Photon Absorption in Bulk Material

447

H. Zen, T. Kii, K. Masuda, T. Nakajima, H. Ohgaki
Kyoto University, Kyoto, Japan

A multi-bunch, pico-second DUV photocathode drive laser system has been developed for photocathode operation of mid-infrared free electron laser facility, KU-FEL.* By using the laser, KU-FEL has already succeeded in first lasing under the photocathode operation.** The pulse duration of the photocathode driving laser is a quite important parameter because it determines the initial electron pulse duration on the cathode surface. However, the pulse duration of the photocathode driving laser had not been characterized. A very convenient pulse duration measurement method utilizing two-photon absorption in bulk material, which can be used for DUV laser pulses, has been proposed and demonstrated so far.*** In this study, a DUV nonlinear autocorrelator based on the proposed method was developed to measure the pulse duration of the DUV photocathode driving laser. As the result of measurement, the pulse duration was evaluated as 5.8±0.2 ps (FWHM). The principle of this method, experimental setup and measured results will be presented.
* H. Zen et al., Proc. of FEL2014, pp.828-831 (2015).
** H. Zen et al., Proc. of IPAC2016, pp.754-756 (2016).
*** C. Homann et al., Applied Physics B 104, 783 (2011).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP014

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP015

Current Experimental Work with Diamond Field-Emitter Array Cathodes

450

H.L. Andrews, R.L. Fleming, J.W. Lewellen, K.E. Nichols, D.Y. Shchegolkov, E.I. Simakov
LANL, Los Alamos, New Mexico, USA
B.K. Choi
Vanderbilt University, Nashville, USA

Funding: We gratefully acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program for this work.
Diamond Field-Emitter Array (DFEA) cathodes are arrays of micron-scale diamond pyramids with nanometer-scale tips, thereby providing high emission currents with small emittance and energy spread. To date they have been demonstrated in a close-diode configuration, spaced only a few hundred microns from a solid anode, and have shown very promising results in terms of emittance, energy spread, and per-tip emission currents. We present recent results investigating DFEA performance in a large-gap configuration, such that the cathodes are a few millimeters from a solid anode, and show that performance is the same or better as the close-diode geometry previously studied. However, array performance is still limited by anode damage. We are redesigning our cathode test stand to overcome the inherent limitations of a solid anode, allow for transport of the emitted beam, and further explore real-world DFEA performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP016

Modeling of Diamond Field-Emitter Arrays for High-Brightness Photocathode Applications

454

C. Huang, H.L. Andrews, B.K. Choi, R.L. Fleming, T.J. Kwan, J.W. Lewellen, D.C. Nguyen, K.E. Nichols, V.N. Pavlenko, A. Piryatinski, D.Y. Shchegolkov, E.I. Simakov
LANL, Los Alamos, New Mexico, USA

Funding: Work performed under the auspices of the U.S. DOE by the LANS, LLC, Los Alamos National Laboratory (LANL) under Contract No. DE-AC52-06NA25396. Work supported by the LDRD program at LANL.
Dielectric Laser Accelerator (DLA) is capable of generating high output power for an X-ray free-electron laser (FEL), while having a size 1-2 orders of magnitude smaller than existing Radio-Frequency (RF) accelerators. Single Diamond Field-Emitter (DFE) or array of such emitters (DFEA) can be employed as high-current ultra-low-emittance photocathodes for compact DLAs. We are developing a first principle semi-classical Monte-Carlo (MC) emission model for DFEAs that includes the effects of carriers' photoexcitation, their transport to the emitter surface, and the tunnelling through the surface. The electronic structure size quantization affecting the transport and tunnelling processes within the sharp diamond tips is also accounted for. These aspects of our model and their implementation and validation, as well as macroscopic electromagnetic beam simulation of DFE are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP018

Electron Beam Heating with the European XFEL Laser Heater

458

M. Hamberg
Uppsala University, Uppsala, Sweden
F. Brinker, I. Hartl, S. Koehler, B. Manschwetus, M. Scholz, L. Winkelmann
DESY, Hamburg, Germany

Funding: Work supported by Swedish Research council, Sweden, Olle Engkvist foundation and DESY, Hamburg, Germany.
The commissioning of the European XFEL is ongoing. To reduce unwanted longitudinal micro-bunching effects, a laser heater is implemented. Here we present the first heating steps and commissioning of the laser heater at the injector section.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP019

High Stable Pulse Modulator for PAL-XFEL*

460

S.S. Park, H.-S. Kang, S.H. Kim, H.-S. Lee
PAL, Pohang, Kyungbuk, Republic of Korea

Funding: Work supported by Ministry of Science, ICT(Information/Communication Technology) and Future Planning.
The XFEL of Pohang Accelerator Laboratory (PAL) commissioned the 10 GeV PAL-XFEL project in 2015. The PAL-XFEL needs a highly-stable electron beam. The very stable beam voltage of a klystron-modulator is essential to provide the stable acceleration field for an electron beam. Thus, the modulator system for the XFEL requires less than 50 ppm PFN voltage stability. To get this high stability on the modulator system, the HVPS of inverter type is an important component. The modulator also needs lower noise and more smart. In this paper, we will discuss the design and the test results of the high-stability pulse modulator system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP021

Preliminary Results of the Dark Current Modelling for the Polfel Superconducting Lead Photocathode

463

K. Szymczyk, J.A. Lorkiewicz, R. Nietubyć
NCBJ, Świerk/Otwock, Poland
J.K. Sekutowicz
DESY, Hamburg, Germany

Preparation for the construction of Polish Free Electron Laser (POLFEL) will begin shortly at National Centre for Nuclear Research (NCBJ) in Warsaw. POLFEL is planned as a fourth-generation light source driven by a superconducting (sc) electron accelerator. The concept includes an all-superconducting injector with a thin-film lead sc photocathode, dedicated to continuous wave or long-pulse linac operation. One of the issues which emerges in connection with operation of high-gradient electron guns furnished with dismountable photocathode plugs is the dark current emitted from the cathode surface inhomogeneities. The dark current usually degrades accelerator performance. The purpose of this paper is to present preliminary investigation results of the dark current generation in the electron gun with a thin lead layer deposited on a niobium plug. Specific features of geometric configuration like rounded plug edges, a gap between the plug and the back gun wall as well as cathode surface roughness have been taken into account for the electron field emission and RF field calculations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP024

Design and Research of a Micro-Pulse Electron Gun

466

D.Y. Yang, B.T. Li, X.Y. Lu, W.W. Tan, L. Xiao, Y. Yang, Z.Q. Yang, J. Zhao
PKU, Beijing, People's Republic of China
K. Zhou
CAEP/IAE, Mianyang, Sichuan, People's Republic of China

Micro-pulse electron gun (MPG) is a novel electron source which can produce narrow-pulse, high-repetition rate electron current. Theoretical and experiment work have been done to study physical properties and steady operating conditions of MPG. Proof-of-principle work has been finished and the next work is to research the parameters of the MPG electron beam and master the MPG work property deeply. Thus, a high voltage accelerating platform which can supply 100 kV direct voltage was designed. Furthermore, electromagnetic and mechanism designs were operated to adapt the high voltage platform and measure beam parameters.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP024

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP025

Emittance Measurements from SRF Gun in CeC Accelerator

470

K. Mihara
Stony Brook University, Stony Brook, USA
Y.C. Jing, V. Litvinenko, I. Pinayev, G. Wang
BNL, Upton, Long Island, New York, USA
I. Petrushina
SUNY SB, Stony Brook, New York, USA

Funding: DoE NP office, grant DE-FOA-0000632 and NSF grant PHY-1415252
In this paper we report on extremely good performance of 113 MHz SRF CW gun. This gun is a part of the system built to test coherent electron cooling concept and was aimed to generate trains of 78 kHz pulses with large 1 nC to 5 nC charge per bunch. While it was not built for attaining record low emittances, the machine can achieve very low normalized emittances ~ 0.3 mm mrad with 0.5 nC charge per bunch using CsK2Sb photocathode. In addition to excellent performance, this gun provides for very long lifetime of these high QE photocathodes, with a typical using time of 2 months.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP025

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP026

Inducing Microbunching in the CLARA FEL Test Facility

475

A.D. Brynes
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

We present simulation studies of the laser heater interaction in the CLARA FEL test facility using a non-uniform laser pulse. The microbunching instability, which manifests itself as correlated energy or density modulations in an electron bunch, can degrade the performance of an FEL. Most x-ray free electron lasers (FELs) utilise a so-called laser heater system to impose a small increase in the uncorrelated energy spread of the bunch at low energy to damp the instability – this technique involves imposing a laser pulse on the bunch while it is propagating through an undulator in a dispersive region. However, if the instability can be controlled, the electron bunch profile can be manipulated, yielding novel applications for the FEL, or for generation of THz radiation. Control of the microbunching instability can be achieved by modulating the intensity profile of the laser heater pulse to impose a non-uniform kick along the electron bunch. We have simulated this interaction for various laser intensity profiles and bunch compression factors.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-WEP026

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)