Lettry, J.

Paper	Title	Page
TUPLS129	EURISOL 100 kW Target Stations Operation and Implications for its Proton Driver Beam	1807
	E. Noah, F. Gerigk, J. Lettry, M. Lindroos, T. Stora CERN, Geneva
	Targets for the next generation radioactive ion beam (RIB) facilities (RIA, EURISOL) will be subjected to energy deposition levels that call for a specific design of the target and ion source assembly to dissipate the deposited heat and to extract and ionize isotopes of interest efficiently. EURISOL, the next generation European RIB facility, plans to operate four target stations in parallel, three 100 kW direct targets and one 5 MW spallation neutron source with a GeV proton linac driver. The nature of the beam sharing has yet to be defined because in practice it will have a direct impact on target design, operation and lifetime. Splitting the beam in time implies that each target would be subjected to a pulsed beam, whose pulse width and repetition cycle have to be optimized in view of the RIB production. The 100 kW targets are expected to have a goal lifetime of three weeks. Target operation from the moment it is installed on a target station until its exhaustion involves several phases during which the incident proton beam intensity will vary. This paper discusses challenges for high power targetry at EURISOL, with an emphasis on requirements for the proton linac parameters.
TUODFI01	The Final Collimation System for the LHC	986
	R.W. Assmann, O. Aberle, G. Bellodi, A. Bertarelli, C.B. Bracco, H.-H. Braun, M. Brugger, S. Calatroni, R. Chamizo, A. Dallocchio, B. Dehning, A. Ferrari, P. Gander, A. Grudiev, E.B. Holzer, J.-B. Jeanneret, J.M. Jimenez, M. Jonker, Y. Kadi, K. Kershaw, J. Lendaro, J. Lettry, R. Losito, M. Magistris, A.M. Masi, M. Mayer, E. Métral, R. Perret, C. Rathjen, S. Redaelli, G. Robert-Demolaize, S. Roesler, F. Ruggiero, M. Santana-Leitner, P. Sievers, M. Sobczak, E. Tsoulou, V. Vlachoudis, Th. Weiler CERN, Geneva I. Baishev, I.L. Kurochkin IHEP Protvino, Protvino, Moscow Region
	The LHC collimation system has been re-designed over the last three years in order to address the unprecedented challenges that are faced with the 360 MJ beams at 7 TeV. The layout of the LHC has now been fixed and a final approach for collimation and cleaning has been adopted. In total 132 collimator locations have been reserved in the two LHC rings and can be installed in a phased approach. Ninety collimators of five different types will be available for initial beam operation. The system has been fully optimized for avoiding quenches of super-conducting magnets during beam losses and for sufficient survival of beamline components against radioactive dose. The phased approach for LHC collimation is described, the various collimators and their functionalities are explained, and the expected system performance is summarized.
	Transparencies
THPCH196	A Proof-of-Principle Experiment for a High-Power Target System	3254
	H.G. Kirk, V. Samulyak, N. Simos, T. Tsang BNL, Upton, Long Island, New York J.R.J. Bennett CCLRC/RAL/ASTeC, Chilton, Didcot, Oxon T.R. Edgecock CCLRC/RAL, Chilton, Didcot, Oxon I. Efthymiopoulos, A. Fabich, H. Haseroth, F. Haug, J. Lettry CERN, Geneva V.B. Graves, P.T. Spampinato ORNL, Oak Ridge, Tennessee K.T. McDonald PU, Princeton, New Jersey H.J. Park PAL, Pohang, Kyungbuk
	The MERIT experiment, to be run at CERN in 2007, is a proof-of-principle test for a target system that converts a 4-MW proton beam into a high-intensity muon beam for either a neutrino factory complex or a muon collider. The target system is based on a free mercury jet that intercepts an intense proton beam inside a 15-T solenoidal magnetic field.