CYCLOTRONS2022 - List of Authors (Song, G.F.)

Paper	Title	Page
MOAO02	The Commissioning of a 230 MeV Superconducting Cyclotron CYCIAE-230	15
	C. Wang, H.R. Cai, W.F. Fu, A.L. He, M.Z. Hu, B. Ji, L.Y. Ji, X.L. Jia, Y. Jia, T.Y. Jiang, J. Liu, J.Y. Liu, P. Liu, Z.W. Liu, X. Mu, S. Pei, G.F. Song, Q.Q. Song, F. Wang, J.Y. Wei, L.P. Wen, J.S. Xing, Z.G. Yin, D.Z. Zhang, S.P. Zhang, T.J. Zhang, X. Zheng, H. Zhou, P.F. Zhu, X.F. Zhu CIAE, Beijing, People’s Republic of China
	There are very strong demands for proton accelera-tors in medium energy range in recent years due to the fast growth of proton therapy and the space science in China. For the applications of proton therapy and pro-ton irradiation, the energy range of proton beam is usually from 200MeV to 250MeV, or even higher for astronavigation [1]. An R&D project for constructing a 230MeV superconducting cyclotron (CYCIAE-230) has been initiated at China Institute of Atomic Energy (CIAE) since Jan 2015. In July of 2016, after the fund-ing was approved by China National Nuclear Corpora-tion (CNNC), the construction project was fully launched. In Dec 2019, the superconducting main magnet and the RF system were transferred to the new-ly built commissioning site. Then, the RF commission-ing, ion source and central region test were performed even during the pandemic in early 2020. In September 2020, after finishing the commissioning tests of all subsystems, the beam was reached the extraction channel but with very low efficiency. Since then, with more efforts on beam diagnostics, the fine tuning of the beam phase and the adjusting of the superconduct-ing coil have been proven to be useful to get higher beam extraction efficiency ~55%. In this paper, the commissioning of the key components, including the main magnet, SC coils, internal ion source and central region, extraction system, etc, as well as the commis-sioning progress of the machine CYCIAE-230 will be presented.
	Slides MOAO02 [10.305 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-MOAO02
About •	Received ※ 24 January 2023 — Revised ※ 25 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 10 June 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPO004	Beam Dump Development for High Power Proton and Electron Beam	54
	J.Y. Liu, H.R. Cai, M.Z. Hu, G.F. Pan, S. Pei, G.F. Song, L. Wang, Y. Wang, S.M. Wei, Z.G. Yin, S.P. Zhang, T.J. Zhang, X.F. Zhu CIAE, Beijing, People’s Republic of China
	The high-intensity 100 MeV proton cyclotron CYCIAE-100 had provided 52 kW beam to the beam dump in 2018, is planning to upgrade at China Institute of Atomic Energy(CIAE). It is designed to provide a 75~100 MeV, 1 mA proton beam. So, a new beam dump for higher beam power have been developed since 2020. At the same time, a 1:4 scale, RF cavity with Q value up to 42000, is constructed for the engineering feasibility verification of a 2 GeV/6 MW CW FFAG, which is also being considered as a main accelerating cavity of a 100 kW electron accelerator. The electron beam will be rotated and accelerated 7 times by the gradient dipoles and the high Q cavity. The beam dump is designed to also use for the 100kW electron beam. With the same-level beam power of the two accelerators above the content, a beam dump for absorbing two kinds of particle beams according to the characteristics of the modification was designed. The energy deposition of 100MeV proton beam and 5MeV electron beam in the beam dump was investigated by the Monte-Carlo simulation program FLUKA. The beam dump cooling structure was optimizing by ICEM-CFD and fluent, so that the beam dump temperature was controlled less than 100°C, and the maximum temperature on the beam dump is less than 450°C. The beam dump is designed as a cube (450200200, unit:mm) with two 2.5°V-type copper pentagon and two flat parts. All the details about the simulation of energy deposition, thermal distribution and structure design will be presented in the paper.
	Poster MOPO004 [3.428 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-MOPO004
About •	Received ※ 31 December 2022 — Revised ※ 26 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 25 June 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUBO03	Application Progress of CYCIAE-100 High Current Proton Cyclotron	130
	L.C. Cao, X.L. Jia, Z.W. Liu, G.F. Song, T.J. Zhang CIAE, Beijing, People’s Republic of China
	A new RIB facility, Beijing radioactive ion-beam facility (BRIF) had been constructed at CIAE. A 100 MeV H⁻ cyclotron (CYCIAE-100) is selected as the driving accelerator which can provide a 70 - 100 MeV, 10 pA - 520 µA proton beam for basic and applied research in the field of nuclear science and technology. The application of this facility has promoted the development of frontier scientific research in China, such as radioactive nuclear beam physics, nuclear data, neutron physics and space radiation effects. Recently, quasi-monoenergetic neutron source above 20 MeV and the white light neutron source with the best time resolution were completed, which had filled the gap in the measurement of neutron data in the range of energy of 100 MeV in China. In this paper, the main milestones in the use and development of CYCIAE-100 high current proton cyclotron are reviewed, the scientific applications based on platform are described, and the important topics in proton applications based on intermediate energy are discussed, including space radiation hardening, neutron standard radiation field and biological radiation damage mechanism.
	Slides TUBO03 [7.851 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-TUBO03
About •	Received ※ 31 December 2022 — Revised ※ 24 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 25 June 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPO010	High Intensity Cyclotron System Integration and Commissioning for Industrialization Application	225
	P.Z. Li, H.R. Cai, S.G. Hou, X.L. Jia, G.F. Pan, G.F. Song, J.F. Wang, G. Yang, H. Zhang, T.J. Zhang CIAE, Beijing, People’s Republic of China
	Up to 430 µA beam intensity was obtained in 10 MeV CRM cyclotron (CYCIAE-CRM) at China Institute of Atomic Energy (CIAE) in 2010. Whereafter, CIAE built a series of 14 MeV high intensity external ion source cyclotrons for medical isotope application and its relevant research. Compared with research cyclotron facility, cyclotron for industrialization application requires higher level of safety, usability and stability. Therefore, mechanical and electrical system integration and optimum are applied in the cyclotron design and commissioning. Electrical devices of cyclotron, including power supply, RF amplifier and PLC controller, are integrated into four standard industrial shielding cabinets with electromagnetic compatibility (EMC) design to improve electromagnetic interference and operation stability. Besides, earthing system is rearranged in regular laboratory maintenance period to minimize electromagnetic coupling of different signal systems. Based on the previous compact system integration, communication system is integrated into each electrical device as well and could be operated in local and remote mode for the convenience of commissioning. Industrial Ethernet standard PROFINET is adopted as communication protocol to improve the efficiency of protocol interaction towards millisecond level. Regarding RF system, start-up sequence of LLRF is optimized to increase uptime and reliability. The commissioning is also presented in this paper.
DOI •	reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-WEPO010
About •	Received ※ 06 December 2022 — Revised ※ 31 December 2022 — Accepted ※ 09 February 2023 — Issue date ※ 30 October 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Commissioning of a 230 MeV Superconducting Cyclotron CYCIAE-230

15

C. Wang, H.R. Cai, W.F. Fu, A.L. He, M.Z. Hu, B. Ji, L.Y. Ji, X.L. Jia, Y. Jia, T.Y. Jiang, J. Liu, J.Y. Liu, P. Liu, Z.W. Liu, X. Mu, S. Pei, G.F. Song, Q.Q. Song, F. Wang, J.Y. Wei, L.P. Wen, J.S. Xing, Z.G. Yin, D.Z. Zhang, S.P. Zhang, T.J. Zhang, X. Zheng, H. Zhou, P.F. Zhu, X.F. Zhu
CIAE, Beijing, People’s Republic of China

There are very strong demands for proton accelera-tors in medium energy range in recent years due to the fast growth of proton therapy and the space science in China. For the applications of proton therapy and pro-ton irradiation, the energy range of proton beam is usually from 200MeV to 250MeV, or even higher for astronavigation [1]. An R&D project for constructing a 230MeV superconducting cyclotron (CYCIAE-230) has been initiated at China Institute of Atomic Energy (CIAE) since Jan 2015. In July of 2016, after the fund-ing was approved by China National Nuclear Corpora-tion (CNNC), the construction project was fully launched. In Dec 2019, the superconducting main magnet and the RF system were transferred to the new-ly built commissioning site. Then, the RF commission-ing, ion source and central region test were performed even during the pandemic in early 2020. In September 2020, after finishing the commissioning tests of all subsystems, the beam was reached the extraction channel but with very low efficiency. Since then, with more efforts on beam diagnostics, the fine tuning of the beam phase and the adjusting of the superconduct-ing coil have been proven to be useful to get higher beam extraction efficiency ~55%. In this paper, the commissioning of the key components, including the main magnet, SC coils, internal ion source and central region, extraction system, etc, as well as the commis-sioning progress of the machine CYCIAE-230 will be presented.

Slides MOAO02 [10.305 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-MOAO02

About •

Received ※ 24 January 2023 — Revised ※ 25 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 10 June 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPO004

Beam Dump Development for High Power Proton and Electron Beam

54

J.Y. Liu, H.R. Cai, M.Z. Hu, G.F. Pan, S. Pei, G.F. Song, L. Wang, Y. Wang, S.M. Wei, Z.G. Yin, S.P. Zhang, T.J. Zhang, X.F. Zhu
CIAE, Beijing, People’s Republic of China

The high-intensity 100 MeV proton cyclotron CYCIAE-100 had provided 52 kW beam to the beam dump in 2018, is planning to upgrade at China Institute of Atomic Energy(CIAE). It is designed to provide a 75~100 MeV, 1 mA proton beam. So, a new beam dump for higher beam power have been developed since 2020. At the same time, a 1:4 scale, RF cavity with Q value up to 42000, is constructed for the engineering feasibility verification of a 2 GeV/6 MW CW FFAG, which is also being considered as a main accelerating cavity of a 100 kW electron accelerator. The electron beam will be rotated and accelerated 7 times by the gradient dipoles and the high Q cavity. The beam dump is designed to also use for the 100kW electron beam. With the same-level beam power of the two accelerators above the content, a beam dump for absorbing two kinds of particle beams according to the characteristics of the modification was designed. The energy deposition of 100MeV proton beam and 5MeV electron beam in the beam dump was investigated by the Monte-Carlo simulation program FLUKA. The beam dump cooling structure was optimizing by ICEM-CFD and fluent, so that the beam dump temperature was controlled less than 100°C, and the maximum temperature on the beam dump is less than 450°C. The beam dump is designed as a cube (450*200*200, unit:mm) with two 2.5°V-type copper pentagon and two flat parts. All the details about the simulation of energy deposition, thermal distribution and structure design will be presented in the paper.

Poster MOPO004 [3.428 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-MOPO004

About •

Received ※ 31 December 2022 — Revised ※ 26 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 25 June 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUBO03

Application Progress of CYCIAE-100 High Current Proton Cyclotron

130

L.C. Cao, X.L. Jia, Z.W. Liu, G.F. Song, T.J. Zhang
CIAE, Beijing, People’s Republic of China

A new RIB facility, Beijing radioactive ion-beam facility (BRIF) had been constructed at CIAE. A 100 MeV H⁻ cyclotron (CYCIAE-100) is selected as the driving accelerator which can provide a 70 - 100 MeV, 10 pA - 520 µA proton beam for basic and applied research in the field of nuclear science and technology. The application of this facility has promoted the development of frontier scientific research in China, such as radioactive nuclear beam physics, nuclear data, neutron physics and space radiation effects. Recently, quasi-monoenergetic neutron source above 20 MeV and the white light neutron source with the best time resolution were completed, which had filled the gap in the measurement of neutron data in the range of energy of 100 MeV in China. In this paper, the main milestones in the use and development of CYCIAE-100 high current proton cyclotron are reviewed, the scientific applications based on platform are described, and the important topics in proton applications based on intermediate energy are discussed, including space radiation hardening, neutron standard radiation field and biological radiation damage mechanism.

Slides TUBO03 [7.851 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-TUBO03

About •

Received ※ 31 December 2022 — Revised ※ 24 January 2023 — Accepted ※ 09 February 2023 — Issue date ※ 25 June 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPO010

High Intensity Cyclotron System Integration and Commissioning for Industrialization Application

225

P.Z. Li, H.R. Cai, S.G. Hou, X.L. Jia, G.F. Pan, G.F. Song, J.F. Wang, G. Yang, H. Zhang, T.J. Zhang
CIAE, Beijing, People’s Republic of China

Up to 430 µA beam intensity was obtained in 10 MeV CRM cyclotron (CYCIAE-CRM) at China Institute of Atomic Energy (CIAE) in 2010. Whereafter, CIAE built a series of 14 MeV high intensity external ion source cyclotrons for medical isotope application and its relevant research. Compared with research cyclotron facility, cyclotron for industrialization application requires higher level of safety, usability and stability. Therefore, mechanical and electrical system integration and optimum are applied in the cyclotron design and commissioning. Electrical devices of cyclotron, including power supply, RF amplifier and PLC controller, are integrated into four standard industrial shielding cabinets with electromagnetic compatibility (EMC) design to improve electromagnetic interference and operation stability. Besides, earthing system is rearranged in regular laboratory maintenance period to minimize electromagnetic coupling of different signal systems. Based on the previous compact system integration, communication system is integrated into each electrical device as well and could be operated in local and remote mode for the convenience of commissioning. Industrial Ethernet standard PROFINET is adopted as communication protocol to improve the efficiency of protocol interaction towards millisecond level. Regarding RF system, start-up sequence of LLRF is optimized to increase uptime and reliability. The commissioning is also presented in this paper.

DOI •

reference for this paper ※ doi:10.18429/JACoW-CYCLOTRONS2022-WEPO010

About •

Received ※ 06 December 2022 — Revised ※ 31 December 2022 — Accepted ※ 09 February 2023 — Issue date ※ 30 October 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)