SRF2015 - List of Keywords (luminosity)

Paper	Title	Other Keywords	Page
THAA01	Recent Developments in Superconducting Deflecting-Mode Cavities	cavity, dipole, HOM, simulation	987
	J.R. Delayen ODU, Norfolk, Virginia, USA
	In the last few years there has been a growing interest in compact superconducting cavities operating in a deflecting mode to be used either in rf separators or crabbing systems. This talk will give an overview of recent progress in global activities towards SRF deflecting mode cavities.
	Slides THAA01 [4.729 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB019	Bead-Pull Measurements of the Main Deflecting Mode of the Double-Quarter-Wave Cavity for the HL-LHC	cavity, simulation, resonance, factory	1105
	M. Navarro-Tapia, R. Calaga CERN, Geneva, Switzerland
	Funding: This research has received funding from the European Commission under the FP7 project HiLumi LHC (Grant agreement no. 284404), and under a Marie Curie action (Grant agreement PCOFUND-GA-2010-267194). A full-scale model of the double-quarter-wave (DQW) cavity towards the High-Luminosity Large Hadron Collider (HL-LHC) upgrade was built in aluminum to characterize the deflecting mode. Field strength measurements have been carried out for both the transverse and longitudinal electromagnetic fields, by using the bead-pull technique. Perturbation objects of different shapes and material were used to separate the electric and magnetic field components. A reasonably good agreement was found between numerical simulation and measurements, which confirm the reliability and accuracy of the measurements done.
	Poster THPB019 [0.237 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB053	Electromagnetic Design of 400 MHz RF-Dipole Crabbing Cavity for LHC High Luminosity Upgrade	cavity, HOM, dipole, impedance	1222
	S.U. De Silva, J.R. Delayen, H. Park ODU, Norfolk, Virginia, USA Z. Li SLAC, Menlo Park, California, USA
	The beam crabbing proposed for the LHC High Luminosity Upgrade requires two crabbing systems operating in both horizontal and vertical planes. In addition, the crabbing cavity design needs to meet strict dimensional constraints and functional specifications of the cavities. This paper presents the detailed electromagnetic design including em properties, multipole analysis, multipacting levels of the 400 MHz rf-dipole crabbing cavity.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB069	Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities	HOM, niobium, cavity, SRF	1279
	C. Zanoni, S. Atieh, I. Aviles Santillana, R. Calaga, O. Capatina, T. Capelli, F. Carra, P. Freijedo Menendez, M. Garlaschè, J.-M. Geisser, R. Leuxe, L. Marques Antunes Ferreira, E. Rigutto CERN, Geneva, Switzerland S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, J.R. Delayen, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA A.J. May, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The High-Luminosity upgrade for the LHC relies on a set of RF Crab Cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final shape is provided along with an insight in the mechanical and thermal analyses performed to validate the design of these critical components. Emphasis is also given to test campaigns, material selection, prototyping and initial fabrication that are aimed at fulfilling the highly demanding tolerances of the couplers.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

THAA01

Recent Developments in Superconducting Deflecting-Mode Cavities

cavity, dipole, HOM, simulation

987

J.R. Delayen
ODU, Norfolk, Virginia, USA

In the last few years there has been a growing interest in compact superconducting cavities operating in a deflecting mode to be used either in rf separators or crabbing systems. This talk will give an overview of recent progress in global activities towards SRF deflecting mode cavities.

Slides THAA01 [4.729 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB019

Bead-Pull Measurements of the Main Deflecting Mode of the Double-Quarter-Wave Cavity for the HL-LHC

cavity, simulation, resonance, factory

1105

M. Navarro-Tapia, R. Calaga
CERN, Geneva, Switzerland

Funding: This research has received funding from the European Commission under the FP7 project HiLumi LHC (Grant agreement no. 284404), and under a Marie Curie action (Grant agreement PCOFUND-GA-2010-267194).
A full-scale model of the double-quarter-wave (DQW) cavity towards the High-Luminosity Large Hadron Collider (HL-LHC) upgrade was built in aluminum to characterize the deflecting mode. Field strength measurements have been carried out for both the transverse and longitudinal electromagnetic fields, by using the bead-pull technique. Perturbation objects of different shapes and material were used to separate the electric and magnetic field components. A reasonably good agreement was found between numerical simulation and measurements, which confirm the reliability and accuracy of the measurements done.

Poster THPB019 [0.237 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB053

Electromagnetic Design of 400 MHz RF-Dipole Crabbing Cavity for LHC High Luminosity Upgrade

cavity, HOM, dipole, impedance

1222

S.U. De Silva, J.R. Delayen, H. Park
ODU, Norfolk, Virginia, USA
Z. Li
SLAC, Menlo Park, California, USA

The beam crabbing proposed for the LHC High Luminosity Upgrade requires two crabbing systems operating in both horizontal and vertical planes. In addition, the crabbing cavity design needs to meet strict dimensional constraints and functional specifications of the cavities. This paper presents the detailed electromagnetic design including em properties, multipole analysis, multipacting levels of the 400 MHz rf-dipole crabbing cavity.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB069

Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities

HOM, niobium, cavity, SRF

1279

C. Zanoni, S. Atieh, I. Aviles Santillana, R. Calaga, O. Capatina, T. Capelli, F. Carra, P. Freijedo Menendez, M. Garlaschè, J.-M. Geisser, R. Leuxe, L. Marques Antunes Ferreira, E. Rigutto
CERN, Geneva, Switzerland
S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, J.R. Delayen, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
A.J. May, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The High-Luminosity upgrade for the LHC relies on a set of RF Crab Cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final shape is provided along with an insight in the mechanical and thermal analyses performed to validate the design of these critical components. Emphasis is also given to test campaigns, material selection, prototyping and initial fabrication that are aimed at fulfilling the highly demanding tolerances of the couplers.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)