SRF2015 - List of Authors (Rowe, A.M.)

Paper	Title	Page
MOPB028	Preservation of Very High Quality Factors of 1.3 GHz Nine Cell Cavities From Bare Vertical Test to Dressed Horizontal Test	149
	A. Grassellino, S. Aderhold, M. Checchin, A.C. Crawford, C.J. Grimm, A. Hocker, M. Martinello, O.S. Melnychuk, J.P. Ozelis, S. Posen, A.M. Rowe, D.A. Sergatskov, N. Solyak, R.P. Stanek, G. Wu Fermilab, Batavia, Illinois, USA D. Gonnella Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA J.M. Köszegi HZB, Berlin, Germany M. Liepe Cornell University, Ithaca, New York, USA
	In this contribution we will report quality factor evolution of several different nine cell N doped cavities with very high Q. The evolution of the quality factor will be reported from bare to dressed in vertical test to dressed in horizontal test with unity coupling to dressed in horizontal test and CM-like environment/configuration (with RF ancillaries). Cooling studies and optimal cooling regimes will be discussed for both vertical and horizontal tests and comparisons will be drawn also for different styles titanium vessels. Studies of sensitivities to magnetic field in final horizontal configuration have been performed by applying a field around the dressed cavity and varying the cooling; parameters required for a very good flux expulsion will be presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB033	LCLS-II SRF Cavity Processing Protocol Development and Baseline Cavity Performance Demonstration	159
	M. Liepe, P. Bishop, H. Conklin, R.G. Eichhorn, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, D.L. Hall, G.H. Hoffstaetter, J.J. Kaufman, G. Kulina, J.T. Maniscalco, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA M. Checchin, A.C. Crawford, A. Grassellino, C.J. Grimm, A. Hocker, M. Martinello, O.S. Melnychuk, J.P. Ozelis, A. Romanenko, A.M. Rowe, D.A. Sergatskov, W.M. Soyars, R.P. Stanek, G. Wu Fermilab, Batavia, Illinois, USA E. Daly, G.K. Davis, M.A. Drury, J.F. Fischer, A.D. Palczewski, C.E. Reece JLab, Newport News, Virginia, USA M.C. Ross SLAC, Menlo Park, California, USA
	Funding: Work supported, in part, by the US DOE and the LCLS-II Project under U.S. DOE Contract No. DE-AC05-06OR23177 and DE-AC02-76SF00515. The ”Linac Coherent Light Source-II” Project will construct a 4 GeV CW superconducting RF linac in the first kilometer of the existing SLAC linac tunnel. The baseline design calls for 280 1.3 GHz nine-cell cavities with an average intrinsic quality factor Q0 of 2.7·10¹⁰ at 2K and 16 MV/m accelerating gradient. The LCLS-II high Q0 cavity treatment protocol utilizes the reduction in BCS surface resistance by nitrogen doping of the RF surface layer, which was discovered originally at FNAL. Cornell University, FNAL, and TJNAF conducted a joint high Q0 R&D program with the goal of (a) exploring the robustness of the N-doping technique and establishing the LCLS-II cavity high Q0 processing protocol suitable for production use, and (b) demonstrating that this process can reliably achieve LCLS-II cavity specification in a production acceptance testing setting. In this paper we describe the LCLS-II cavity protocol and analyze combined cavity performance data from both vertical and horizontal testing at the three partner labs, which clearly shows that LCLS-II specifications were met, and thus demonstrates readiness for LCLS-II cavity production.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB087	Integrated High-Power Tests of Dressed N-doped 1.3 GHz SRF Cavities for LCLS-II	342
	N. Solyak, T.T. Arkan, B.E. Chase, A.C. Crawford, E. Cullerton, I.V. Gonin, A. Grassellino, C.J. Grimm, A. Hocker, J.P. Holzbauer, T.N. Khabiboulline, O.S. Melnychuk, J.P. Ozelis, T.J. Peterson, Y.M. Pischalnikov, K.S. Premo, A. Romanenko, A.M. Rowe, W. Schappert, D.A. Sergatskov, R.P. Stanek, G. Wu Fermilab, Batavia, Illinois, USA
	New auxiliary components have been designed and fabricated for the 1.3 GHz SRF cavities comprising the LCLS-II linac. In particular, the LCLS-II cavity’s helium vessel, high-power input coupler, higher-order mode (HOM) feedthroughs, magnetic shielding, and cavity tuning system were all designed to meet LCLS-II specifications. Integrated tests of the cavity and these components were done at Fermilab’s Horizontal Test Stand (HTS) using several kilowatts of continuous-wave (CW) RF power. The results of the tests are summarized here.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB092	Economics of Electropolishing Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid	359
	E.J. Taylor, T.D. Hall, M.E. Inman, S.T. Snyder Faraday Technology, Inc., Clayton, Ohio, USA D. Holmes AES, Medford, New York, USA A.M. Rowe Fermilab, Batavia, Illinois, USA
	A major challenge for industrialization of SRF cavity fabrication and processing is developing a supply chain to meet the high production demands of the ILC prior to establishment of a long term market need. Conventional SRF cavity electropolishing is based on hydrofluoric-sulfuric acid mixtures. In comparison, FARADAYIC® Bipolar EP applies pulse reverse electrolysis in dilute sulfuric acid-water solutions without hydrofluoric acid and offers substantial savings in operating and capital costs. Based on a preliminary economic analysis of the cavity processing requirements associated with the ILC, we project the cost of FARADAYIC® Bipolar EP to be about 27% that of the Baseline EP. In terms of tangible cost savings, the cost per cavity for the FARADAYIC® Bipolar EP and Baseline EP are \1,293 and \4,828, respectively. The “eco-friendly” intangible cost savings are generally accepted although the cost savings in terms of material degradation and maintenance are difficult to quantify at this time. Continued development and validation of FARADAYIC® Bipolar EP on nine cell cavities will contribute greatly to the industrialization of SRF accelerator technology. Work supported by DOE Grant Nos. DE-SC0011235 and DE-SC0011342 and DOE Purchase Order No. 594128.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB101	Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid	390
	M.E. Inman, T.D. Hall, S. Lucatero, S.T. Snyder, E.J. Taylor Faraday Technology, Inc., Clayton, Ohio, USA F. Furuta, G.H. Hoffstaetter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA J.D. Mammosser ORNL, Oak Ridge, Tennessee, USA A.M. Rowe Fermilab, Batavia, Illinois, USA
	Electropolishing of niobium cavities is conventionally conducted in high viscosity electrolytes consisting of concentrated sulfuric and hydrofluoric acids. This use of dangerous and ecologically damaging chemicals requires careful attention to safety protocols to avoid harmful worker exposure and environmental damage. We present an approach for electropolishing of niobium materials based on pulse reverse waveforms, enabling the use of low viscosity aqueous dilute sulfuric acid electrolytes without hydrofluoric acid, or aqueous near-neutral pH salt solutions without any acid. Results will be summarized for both cavity and coupon electropolishing for bulk and final polishing steps. With minimal optimization of pulse reverse waveform parameters we have demonstrated the ability to electropolish single-cell niobium SRF cavities and achieve at least equivalent performance compared to conventionally processed cavities. Cavities are electropolished in a vertical orientation filled with electrolyte and without rotation, offering numerous advantages from an industrial processing perspective. Shielding, external cooling and high surface area cathodes are adaptable to the bipolar EP process. Work supported by DOE Grant Nos. DE-SC0011235 and DE-SC0011342 and DOE Purchase Order No. 594128.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB111	Furnace N2 Doping Treatments at Fermilab	423
	M. Merio, M. Checchin, A.C. Crawford, A. Grassellino, M. Martinello, A.M. Rowe, M. Wong Fermilab, Batavia, Illinois, USA M. Checchin, M. Martinello Illinois Institute of Technology, Chicago, Illlinois, USA
	Funding: Operated by Fermi Research Alliance, LLC under Contract No. De-AC02-07CH11359 with the United States Department of Energy. The Fermilab SRF group regularly performs Nitrogen (N2) doping heat treatments on superconducting cavities in order to improve their Radio Frequency (RF) performances. This paper describes the set up and operations of the Fermilab vacuum furnaces, with a major focus on the implementation and execution of the N2 doping recipe. The cavity preparation will be presented, N2 doping recipes will be analyzed and heat treatment data will be reported in the form of plot showing temperature, total pressure and partial pressures over time. Finally possible upgrades and improvements of the furnace and the N2 doping process are discussed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB089	HOM Coupler Performance in CW Regime in Horizontal and Vertical Tests	1349
	N. Solyak, M.H. Awida, A. Grassellino, C.J. Grimm, A. Hocker, J.P. Holzbauer, T.N. Khabiboulline, O.S. Melnychuk, A.M. Rowe, D.A. Sergatskov, N. Solyak Fermilab, Batavia, Illinois, USA J.K. Sekutowicz DESY, Hamburg, Germany
	Power dissipation in HOM coupler antenna can limit cavity gradient in cw operation. XFEL design of HOM coupler, feedthrough and thermal connection to 2K pipe was accepted for LCLS-II cavity based on simulation results. Recently a series of vertical and horizontal tests was done to prove design for cw operation. In vertical test was found no effect of HOM coupler heating on high-Q cavity performance. In horizontal cryostat HOM coupler was tested up-to 23MV/m in continuous wave mode. Result proves that XFEL HOM coupler meets LCLS-II specifications.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB105	Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities	1397
	Y. Xie, A. Kanareykin Euclid TechLabs, LLC, Solon, Ohio, USA T.N. Khabiboulline, A. Lunin, V. Poloubotko, A.M. Rowe, N. Solyak, V.P. Yakovlev Fermilab, Batavia, Illinois, USA J. Rathke AES, Medford, New York, USA
	Superconducting ILC-type cavities have an rf input coupler that is welded on. A detachable input coupler will reduce conditioning time (can be conditioned separately), reduce cost and improve reliability. The problem with placing an extra flange in the superconducting cavity is about creating a possible quench spot at the seal place. Euclid Techlabs LLC has developed a coaxial coupler which has an on the surface with zero magnetic field (hence zero surface current). By placing a flange in that area we are able to avoid disturbing surface currents that typically lead to a quench. The coupler is optimized to preserve the axial symmetry of the cavity and rf field. The surface treatments and rf test of the proto- type coupler with a 1.3 GHz ILC-type single-cell cavity at Fermilab will be reported and discussed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Preservation of Very High Quality Factors of 1.3 GHz Nine Cell Cavities From Bare Vertical Test to Dressed Horizontal Test

149

A. Grassellino, S. Aderhold, M. Checchin, A.C. Crawford, C.J. Grimm, A. Hocker, M. Martinello, O.S. Melnychuk, J.P. Ozelis, S. Posen, A.M. Rowe, D.A. Sergatskov, N. Solyak, R.P. Stanek, G. Wu
Fermilab, Batavia, Illinois, USA
D. Gonnella
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
J.M. Köszegi
HZB, Berlin, Germany
M. Liepe
Cornell University, Ithaca, New York, USA

In this contribution we will report quality factor evolution of several different nine cell N doped cavities with very high Q. The evolution of the quality factor will be reported from bare to dressed in vertical test to dressed in horizontal test with unity coupling to dressed in horizontal test and CM-like environment/configuration (with RF ancillaries). Cooling studies and optimal cooling regimes will be discussed for both vertical and horizontal tests and comparisons will be drawn also for different styles titanium vessels. Studies of sensitivities to magnetic field in final horizontal configuration have been performed by applying a field around the dressed cavity and varying the cooling; parameters required for a very good flux expulsion will be presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB033

LCLS-II SRF Cavity Processing Protocol Development and Baseline Cavity Performance Demonstration

159

M. Liepe, P. Bishop, H. Conklin, R.G. Eichhorn, F. Furuta, G.M. Ge, D. Gonnella, T. Gruber, D.L. Hall, G.H. Hoffstaetter, J.J. Kaufman, G. Kulina, J.T. Maniscalco, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
M. Checchin, A.C. Crawford, A. Grassellino, C.J. Grimm, A. Hocker, M. Martinello, O.S. Melnychuk, J.P. Ozelis, A. Romanenko, A.M. Rowe, D.A. Sergatskov, W.M. Soyars, R.P. Stanek, G. Wu
Fermilab, Batavia, Illinois, USA
E. Daly, G.K. Davis, M.A. Drury, J.F. Fischer, A.D. Palczewski, C.E. Reece
JLab, Newport News, Virginia, USA
M.C. Ross
SLAC, Menlo Park, California, USA

Funding: Work supported, in part, by the US DOE and the LCLS-II Project under U.S. DOE Contract No. DE-AC05-06OR23177 and DE-AC02-76SF00515.
The ”Linac Coherent Light Source-II” Project will construct a 4 GeV CW superconducting RF linac in the first kilometer of the existing SLAC linac tunnel. The baseline design calls for 280 1.3 GHz nine-cell cavities with an average intrinsic quality factor Q0 of 2.7·10¹⁰ at 2K and 16 MV/m accelerating gradient. The LCLS-II high Q0 cavity treatment protocol utilizes the reduction in BCS surface resistance by nitrogen doping of the RF surface layer, which was discovered originally at FNAL. Cornell University, FNAL, and TJNAF conducted a joint high Q0 R&D program with the goal of (a) exploring the robustness of the N-doping technique and establishing the LCLS-II cavity high Q0 processing protocol suitable for production use, and (b) demonstrating that this process can reliably achieve LCLS-II cavity specification in a production acceptance testing setting. In this paper we describe the LCLS-II cavity protocol and analyze combined cavity performance data from both vertical and horizontal testing at the three partner labs, which clearly shows that LCLS-II specifications were met, and thus demonstrates readiness for LCLS-II cavity production.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB087

Integrated High-Power Tests of Dressed N-doped 1.3 GHz SRF Cavities for LCLS-II

342

N. Solyak, T.T. Arkan, B.E. Chase, A.C. Crawford, E. Cullerton, I.V. Gonin, A. Grassellino, C.J. Grimm, A. Hocker, J.P. Holzbauer, T.N. Khabiboulline, O.S. Melnychuk, J.P. Ozelis, T.J. Peterson, Y.M. Pischalnikov, K.S. Premo, A. Romanenko, A.M. Rowe, W. Schappert, D.A. Sergatskov, R.P. Stanek, G. Wu
Fermilab, Batavia, Illinois, USA

New auxiliary components have been designed and fabricated for the 1.3 GHz SRF cavities comprising the LCLS-II linac. In particular, the LCLS-II cavity’s helium vessel, high-power input coupler, higher-order mode (HOM) feedthroughs, magnetic shielding, and cavity tuning system were all designed to meet LCLS-II specifications. Integrated tests of the cavity and these components were done at Fermilab’s Horizontal Test Stand (HTS) using several kilowatts of continuous-wave (CW) RF power. The results of the tests are summarized here.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB092

Economics of Electropolishing Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid

359

E.J. Taylor, T.D. Hall, M.E. Inman, S.T. Snyder
Faraday Technology, Inc., Clayton, Ohio, USA
D. Holmes
AES, Medford, New York, USA
A.M. Rowe
Fermilab, Batavia, Illinois, USA

A major challenge for industrialization of SRF cavity fabrication and processing is developing a supply chain to meet the high production demands of the ILC prior to establishment of a long term market need. Conventional SRF cavity electropolishing is based on hydrofluoric-sulfuric acid mixtures. In comparison, FARADAYIC® Bipolar EP applies pulse reverse electrolysis in dilute sulfuric acid-water solutions without hydrofluoric acid and offers substantial savings in operating and capital costs. Based on a preliminary economic analysis of the cavity processing requirements associated with the ILC, we project the cost of FARADAYIC® Bipolar EP to be about 27% that of the Baseline EP. In terms of tangible cost savings, the cost per cavity for the FARADAYIC® Bipolar EP and Baseline EP are \1,293 and \4,828, respectively. The “eco-friendly” intangible cost savings are generally accepted although the cost savings in terms of material degradation and maintenance are difficult to quantify at this time. Continued development and validation of FARADAYIC® Bipolar EP on nine cell cavities will contribute greatly to the industrialization of SRF accelerator technology.
Work supported by DOE Grant Nos. DE-SC0011235 and DE-SC0011342 and DOE Purchase Order No. 594128.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB101

Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid

390

M.E. Inman, T.D. Hall, S. Lucatero, S.T. Snyder, E.J. Taylor
Faraday Technology, Inc., Clayton, Ohio, USA
F. Furuta, G.H. Hoffstaetter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
J.D. Mammosser
ORNL, Oak Ridge, Tennessee, USA
A.M. Rowe
Fermilab, Batavia, Illinois, USA

Electropolishing of niobium cavities is conventionally conducted in high viscosity electrolytes consisting of concentrated sulfuric and hydrofluoric acids. This use of dangerous and ecologically damaging chemicals requires careful attention to safety protocols to avoid harmful worker exposure and environmental damage. We present an approach for electropolishing of niobium materials based on pulse reverse waveforms, enabling the use of low viscosity aqueous dilute sulfuric acid electrolytes without hydrofluoric acid, or aqueous near-neutral pH salt solutions without any acid. Results will be summarized for both cavity and coupon electropolishing for bulk and final polishing steps. With minimal optimization of pulse reverse waveform parameters we have demonstrated the ability to electropolish single-cell niobium SRF cavities and achieve at least equivalent performance compared to conventionally processed cavities. Cavities are electropolished in a vertical orientation filled with electrolyte and without rotation, offering numerous advantages from an industrial processing perspective. Shielding, external cooling and high surface area cathodes are adaptable to the bipolar EP process.
Work supported by DOE Grant Nos. DE-SC0011235 and DE-SC0011342 and DOE Purchase Order No. 594128.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOPB111

Furnace N2 Doping Treatments at Fermilab

423

M. Merio, M. Checchin, A.C. Crawford, A. Grassellino, M. Martinello, A.M. Rowe, M. Wong
Fermilab, Batavia, Illinois, USA
M. Checchin, M. Martinello
Illinois Institute of Technology, Chicago, Illlinois, USA

Funding: Operated by Fermi Research Alliance, LLC under Contract No. De-AC02-07CH11359 with the United States Department of Energy.
The Fermilab SRF group regularly performs Nitrogen (N2) doping heat treatments on superconducting cavities in order to improve their Radio Frequency (RF) performances. This paper describes the set up and operations of the Fermilab vacuum furnaces, with a major focus on the implementation and execution of the N2 doping recipe. The cavity preparation will be presented, N2 doping recipes will be analyzed and heat treatment data will be reported in the form of plot showing temperature, total pressure and partial pressures over time. Finally possible upgrades and improvements of the furnace and the N2 doping process are discussed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB089

HOM Coupler Performance in CW Regime in Horizontal and Vertical Tests

1349

N. Solyak, M.H. Awida, A. Grassellino, C.J. Grimm, A. Hocker, J.P. Holzbauer, T.N. Khabiboulline, O.S. Melnychuk, A.M. Rowe, D.A. Sergatskov, N. Solyak
Fermilab, Batavia, Illinois, USA
J.K. Sekutowicz
DESY, Hamburg, Germany

Power dissipation in HOM coupler antenna can limit cavity gradient in cw operation. XFEL design of HOM coupler, feedthrough and thermal connection to 2K pipe was accepted for LCLS-II cavity based on simulation results. Recently a series of vertical and horizontal tests was done to prove design for cw operation. In vertical test was found no effect of HOM coupler heating on high-Q cavity performance. In horizontal cryostat HOM coupler was tested up-to 23MV/m in continuous wave mode. Result proves that XFEL HOM coupler meets LCLS-II specifications.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB105

Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities

1397

Y. Xie, A. Kanareykin
Euclid TechLabs, LLC, Solon, Ohio, USA
T.N. Khabiboulline, A. Lunin, V. Poloubotko, A.M. Rowe, N. Solyak, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA
J. Rathke
AES, Medford, New York, USA

Superconducting ILC-type cavities have an rf input coupler that is welded on. A detachable input coupler will reduce conditioning time (can be conditioned separately), reduce cost and improve reliability. The problem with placing an extra flange in the superconducting cavity is about creating a possible quench spot at the seal place. Euclid Techlabs LLC has developed a coaxial coupler which has an on the surface with zero magnetic field (hence zero surface current). By placing a flange in that area we are able to avoid disturbing surface currents that typically lead to a quench. The coupler is optimized to preserve the axial symmetry of the cavity and rf field. The surface treatments and rf test of the proto- type coupler with a 1.3 GHz ILC-type single-cell cavity at Fermilab will be reported and discussed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)