JLAB, Newport News, Virginia, USA
Muons, Inc, Batavia, USA
RPI, Troy, New York, USA
ODU, Norfolk, Virginia, USA
We have performed three-dimensional simulations of beam dynamics for parallel-bar transverse electromagnetic mode (TEM) type RF separators: normal- and superconducting. The compact size of these cavities as compared to conventional TM110 type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of eight 2-cell normal conducting cavities or a one- or two-cell superconducting structure are enough to produce the required vertical displacement at the Lambertson magnet. Both the normal and superconducting structures show very small emittance dilution due to the vertical kick of the beam.
JLAB, Newport News, Virginia, USA
ODU, Norfolk, Virginia, USA
Crab crossing of colliding electron and ion beams is essential for accommodating the ultra high bunch repetition frequency in the conceptual design of MEIC – a high luminosity polarized electron-ion collider at Jefferson Lab. The scheme eliminates parasitic beam-beam interactions and avoids luminosity reduction by restoring head-on collisions at interaction points. In this paper, we report simulation studies of beam dynamics with crab cavities for MEIC design. The detailed study involves full 3-D simulations of particle tracking through the various configurations of crab cavities for evaluating the performance. To gain insight, beam and RF dominated fields with other parametric studies will be presented in the paper.
JLAB, Newport News, Virginia, USA
In this paper, we report the first study of beam related instabilities in lepton ring of the proposed electron-ion collider beyond the 12 GeV upgrade of CEBAF at Jefferson lab. The design parameters are consistent with PEP-II. Present studies reveal that coupled bunch and two stream instabilities are important issues and we need feedback system.
JLAB, Newport News, Virginia, USA
University of Connecticut, Storrs, Connecticut, USA
Northern Illinois University, DeKalb, Illinois, USA
JLAB, Newport News, Virginia, USA
ANL, Argonne, USA
BNL, Upton, Long Island, New York, USA
Tech-X, Boulder, Colorado, USA
JLAB, Newport News, Virginia, USA
Coherent electron cooling (CEC) has a potential to significantly boost luminosity of high-energy, high-intensity hadron-hadron and electron-hadron colliders*. In a CEC system, a hadron beam interacts with a cooling electron beam. A perturbation of the electron density caused by ions is amplified and fed back to the ions to reduce the energy spread and the emittance of the ion beam. To demonstrate the feasibility of CEC we propose a proof-of-principle experiment at RHIC using one of JLab’s SRF cryo-modules. In this paper, we describe the experimental setup for CeC installed into one of RHIC's interaction regions. We present results of analytical estimates and results of initial simulations of cooling a gold-ion beam at 40 GeV/u energy via CeC.
* Vladimir N. Litvinenko, Yaroslav S. Derbenev, Physical Review Letters 102, 114801
BNL, Upton, Long Island, New York, USA
JLAB, Newport News, Virginia, USA
CLASSE, Ithaca, New York, USA
In spite of having a small average beam current limit, a linac can have features that make it attractive as an x-ray source: high energy, ultralow emittance and energy spread, and flexible beamline optics. Unlike a storage ring, in which an (undulator) radiation source is necessarily short and positioned at a electron beam waist, in a linac the undulator can be long and the electron beam can be adjusted to have a (virtual) waist far downstream toward the x-ray target. Using a planned CEBAF beamline as an example, this paper shows that a factor of 2000 in beam current can be overcome to produce a monochromatic hard x-ray source comparable with, or even exceeding, the performance of an x-ray line at a third generation storage ring. The optimal electron beam focusing conditions for x-ray flux density and brilliance are derived, and are verified by simulations using the SRW code.
JLAB, Newport News, Virginia, USA
Northern Illinois University, DeKalb, Illinois, USA
Cockcroft Institute, Warrington, Cheshire, United Kingdom
GOO Zaryad, Novosibirsk, Russia
ANL, Argonne, USA
ODU, Norfolk, Virginia, USA
SLAC, Menlo Park, California, USA
An electron-ion collider (MEIC) is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present MEIC design selects a ring-ring collider option and covers a CM energy range up to 51 GeV for both polarized light ions and un-polarized heavy ions, while higher CM energies could be reached by a future upgrade. The MEIC stored colliding ion beams, which will be generated, accumulated and accelerated in a green field ion complex, are designed to match the stored electron beam injected at full energy from the CEBAF in terms of emittance, bunch length, charge and repetition frequency. This design strategy ensures a high luminosity above 1034 s−1cm-2. A unique figure-8 shape collider ring is adopted for advantages of preserving ion polarization during acceleration and accommodation of a polarized deuteron beam for collisions. Our recent effort has been focused on completing this conceptual design as well as design optimization of major components. Significant progress has also been made in accelerator R&D including chromatic correction and dynamical aperture, beam-beam, high energy electron cooling and polarization tracking.