A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Gómez-Martínez, Y.

Paper Title Page
MOP053 The SPIRAL 2 Superconducting Linac 196
 
  • R. Ferdinand
    GANIL, Caen
  • P.-E. Bernaudin, P. Bosland
    CEA, Gif-sur-Yvette
  • Y. Gómez-Martínez
    LPSC, Grenoble
  • T. Junquera, G. Olry, H. Saugnac
    IPN, Orsay
 
 

The SPIRAL2 superconducting linac is composed of 2 cryomodule families, basically one of low beta, called Cryomodule A, and one of high beta, called Cryomodule B. The low beta family is composed of 12 single cavity cryomodule. The high energy section is composed of 7 cryomodules hosting 2 cavities each. According to beam dynamics calculations all the cavities will operate at 88 MHz: one family at beta=0.07, and one at beta=0.12. The design goal for the accelerating field Eacc of the SPIRAL2 QWRs is : 6.5 MV/m. The configuration, cavities and cryomodule tests and status and the foreseen linac tuning will be described.

 
THP009 RF and Cryogenic Tests of the First Beta 0.12 SPIRAL2 Cryomodule 792
 
  • H. Saugnac, C. Commeaux, C. Joly, J. Lesrel, D. Longuevergne, F. Lutton, G. Martinet, G. Olry
    IPN, Orsay
  • R. Beunard, R. Ferdinand, M. Souli
    GANIL, Caen
  • Y. Gómez-Martínez, F. Vezzu
    LPSC, Grenoble
 
 

The SPIRAL2 project, installed in GANIL for Radioactive Ion Beam physics purposes requires the manufacturing of a multi beam driver. This driver is based on a superconducting Linac featuring two 88 MHz Quarter Wave Resonator families. IPN Orsay is in charge of the study and the assembly of the 7 high energy (beta = 0.12) cryomodules. Each cryomodule is composed of two QWRs, specified to operate at 4.2 K with a nominal accelerating gradient of 6.5 MV/m. A first qualifying cryomodule has been manufactured and tested at the beginning of 2008 in order to validate the resonator and the cryostat design before launching the serial production of the 6 remaining cryomodules. The paper presents the main results of this test and the cryomodule design in its final version.

 
THP076 Last SPIRAL 2 10 kW CW RF Coupler Design 969
 
  • Y. Gómez-Martínez, T. Cabanel, J. Giraud, D. Marchand, R. Micoud, F. Vezzu
    LPSC, Grenoble
 
 

The first tests of the SPIRAL 2 coupler have been done successfully in the B-cryomodule of the SPIRAL2 linac. It led to an updated design. We present the new design as well as the results of the last test and conditioning.

 

slides icon

Slides