IPAC2015 - List of Authors (Wang, B.S.)

Paper	Title	Page
MOPTY064	Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies	1088
	P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu NSRRC, Hsinchu, Taiwan
	Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA037	DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE	3194
	Y.S. Wong, Y.-C. Chien, C.Y. Liu, K.-B. Liu, B.S. Wang NSRRC, Hsinchu, Taiwan
	For this paper is studies the storage ring and booster ring power supply cabling design, Papers can be divided into cabling design, control and instrument area construction (CIA), and testing; design including estimated cable length and arrangement, the CIA construction part site of the cable erection and overcome barriers of space; detection section is high resistance meter and insulation testing. Circumference of booster ring is 496.8 meter and storage ring is 518.4 meter, TPS (Taiwan Photon Source) beam current is 500mA at 3GeV. Booster Ring dipole into BD and BH series 54 magnets, cable size is 250 mm2 and total length of 5000m. Booster Ring and storage ring quadrupole 150 magnets and cable size 250 mm2, total length of 17000m. Storing Ring dipole 48 magnets cable size 325 mm2, total length of 6000m. On the positive and negative voltage cables will produce magnetic interference effects generated through cabling overlapped technology eliminates magnetic interference. Finally, using a high-impedance machine to detect cabling insulation effect. TPS power supply to the energy transfer is to ensure safe and correct magnet.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA038	Upgrading the Performance of the Power Supply for the TPS Booster Dipole Magnets	3197
	C.Y. Liu, Y.-C. Chien, K.-B. Liu, B.S. Wang, Y.S. Wong NSRRC, Hsinchu, Taiwan
	The performance of the power supply for the dipole magnet is important for the TPS booster ring. The output current of the power supply follows the beam current from 150 MeV ramping to 3 GeV. The frequency of the power supply is 3 Hz. The power supply must thus push enormous energy into the dipole magnets at +1000 V and +1000 A, and can handle this job. Because the TPS booster dipole supply is bipolar and the voltage is large, the lodged capacitors have large effects that produce common-mode high-frequency current noise, which drives the power supply beyond specification. The TPS booster ring hence fails to meet the dc and ramping specification. We designed a common-mode filter to solve the high-frequency current noise by absorbing the current noise from the path of the lodged capacitors to the ground pad. The TPS booster dipole supply thus works within the specification when the power supply is in the dc or ramping mode. The beam current from the 150- MeV dc mode for the injection mode can ramp the beam current to 3 GeV. This paper reports the excellent results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA040	Status of AC Power Supplies for TPS Booster Ring	3203
	Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, B.S. Wang, Y.S. Wong, C.Y. Wu NSRRC, Hsinchu, Taiwan
	TPS is a third generation 3 GeV synchrotron light source under commission in Taiwan. The TPS Booster ring is concentric ring design sharing the same tunnel with storage ring. The booster ring power supplies are responsible of accelerating the 150 MeV Linac output energy to 3 GeV before the beam is preserved in the storage ring. The booster ring power supplies are required to operate at 3Hz sinusoidal waveform with 1000 A peak current for the dipole magnet. All power supplies' specifications and output performance are demonstrated here in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA041	ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY	3206
	B.S. Wang, Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, Y.S. Wong, C.Y. Wu NSRRC, Hsinchu, Taiwan
	In TPS (Taiwan Photon Source) project, 58 home-built small form factor bipolar power supplies are used to fine-tune the trim coil of booster ring bending dipole magnets. With the preliminary analog PI control loop design version, current output will tend to behave with poor linearity around zero current. By employing DSP chip, a full digital PI control loop design together with optimal MOSFT switching algorithm and 13bits PWM output capability is capable of improving the output current performance around zero current. Before the final realization, MATLAB SIMULINK is utilized to find out the optimal MOSFT switching algorithm, and then physical circuit is implemented and tested. The result and design will be demonstrated in this paper to show significant improvement around zero current.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA041
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies

1088

P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, K.-B. Liu, B.S. Wang, C.Y. Wu
NSRRC, Hsinchu, Taiwan

Booster synchrotron for the Taiwan photon source project which is a 3 GeV synchrotron light source constructed at NSRRC is in commissioning. The booster is designed to ramp electron beams from 150 MeV to 3 GeV in 3 Hz therefore the large main power supplies have features of waveform play with trigger functionalities to enable electron beams ramp from 150 MeV to 3 GeV in 3 Hz. However, due to limited bandwidth of power supplies, different magnet loading will result in quite different phase lag for dipoles and four quadrupoles families. To improve tracking error between quadrupole to dipole readings, several strategies are developed and will be summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA037

DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE

3194

Y.S. Wong, Y.-C. Chien, C.Y. Liu, K.-B. Liu, B.S. Wang
NSRRC, Hsinchu, Taiwan

For this paper is studies the storage ring and booster ring power supply cabling design, Papers can be divided into cabling design, control and instrument area construction (CIA), and testing; design including estimated cable length and arrangement, the CIA construction part site of the cable erection and overcome barriers of space; detection section is high resistance meter and insulation testing. Circumference of booster ring is 496.8 meter and storage ring is 518.4 meter, TPS (Taiwan Photon Source) beam current is 500mA at 3GeV. Booster Ring dipole into BD and BH series 54 magnets, cable size is 250 mm2 and total length of 5000m. Booster Ring and storage ring quadrupole 150 magnets and cable size 250 mm2, total length of 17000m. Storing Ring dipole 48 magnets cable size 325 mm2, total length of 6000m. On the positive and negative voltage cables will produce magnetic interference effects generated through cabling overlapped technology eliminates magnetic interference. Finally, using a high-impedance machine to detect cabling insulation effect. TPS power supply to the energy transfer is to ensure safe and correct magnet.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA038

Upgrading the Performance of the Power Supply for the TPS Booster Dipole Magnets

3197

C.Y. Liu, Y.-C. Chien, K.-B. Liu, B.S. Wang, Y.S. Wong
NSRRC, Hsinchu, Taiwan

The performance of the power supply for the dipole magnet is important for the TPS booster ring. The output current of the power supply follows the beam current from 150 MeV ramping to 3 GeV. The frequency of the power supply is 3 Hz. The power supply must thus push enormous energy into the dipole magnets at +1000 V and +1000 A, and can handle this job. Because the TPS booster dipole supply is bipolar and the voltage is large, the lodged capacitors have large effects that produce common-mode high-frequency current noise, which drives the power supply beyond specification. The TPS booster ring hence fails to meet the dc and ramping specification. We designed a common-mode filter to solve the high-frequency current noise by absorbing the current noise from the path of the lodged capacitors to the ground pad. The TPS booster dipole supply thus works within the specification when the power supply is in the dc or ramping mode. The beam current from the 150- MeV dc mode for the injection mode can ramp the beam current to 3 GeV. This paper reports the excellent results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA040

Status of AC Power Supplies for TPS Booster Ring

3203

Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, B.S. Wang, Y.S. Wong, C.Y. Wu
NSRRC, Hsinchu, Taiwan

TPS is a third generation 3 GeV synchrotron light source under commission in Taiwan. The TPS Booster ring is concentric ring design sharing the same tunnel with storage ring. The booster ring power supplies are responsible of accelerating the 150 MeV Linac output energy to 3 GeV before the beam is preserved in the storage ring. The booster ring power supplies are required to operate at 3Hz sinusoidal waveform with 1000 A peak current for the dipole magnet. All power supplies' specifications and output performance are demonstrated here in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA041

ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY

3206

B.S. Wang, Y.-C. Chien, P.C. Chiu, K.T. Hsu, C.Y. Liu, K.-B. Liu, Y.S. Wong, C.Y. Wu
NSRRC, Hsinchu, Taiwan

In TPS (Taiwan Photon Source) project, 58 home-built small form factor bipolar power supplies are used to fine-tune the trim coil of booster ring bending dipole magnets. With the preliminary analog PI control loop design version, current output will tend to behave with poor linearity around zero current. By employing DSP chip, a full digital PI control loop design together with optimal MOSFT switching algorithm and 13bits PWM output capability is capable of improving the output current performance around zero current. Before the final realization, MATLAB SIMULINK is utilized to find out the optimal MOSFT switching algorithm, and then physical circuit is implemented and tested. The result and design will be demonstrated in this paper to show significant improvement around zero current.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA041

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)