IPAC2015 - List of Authors (Fitterer, M.)

Paper	Title	Page
TUPTY035	Beam Dynamics Requirements for the Powering Scheme of the HL-LHC Triplet	2082
	M. Fitterer, R. De Maria, S.D. Fartoukh, M. Giovannozzi CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. For the HL-LHC, β^* values as small as 15 cm are envisaged as baseline scenario for the high luminosity insertions IR1 and IR5, thus leading to an increase of the maximum beta-functions in the inner triplet (IT). The larger beta-functions in the IT result in a higher sensitivity of the beam to any linear or non-linear, static or dynamic, field imperfections in the IT region. In this paper, we summarize accordingly the tolerances of the triplet power supplies in terms of current ripple, stability and reproducibility. Both the baseline IT powering scheme and other alternative schemes will be presented, the later reducing the tune shift caused by a current modulation and thus weakening its possible impact on the long term stability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY036	Crossing Scheme and Orbit Correction in IR1/5 for HL-LHC	2086
	M. Fitterer, R. De Maria, S.D. Fartoukh, M. Giovannozzi CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. In this paper we review the orbit correction strategy and crossing scheme adjustment for the HL-LHC orbit correctors in IR1/5 in view of the new optics and layout version HLLHCV1.1. The main objectives are to optimize the crossing scheme, in particular to reduce the strength of the orbit correctors at D2, and to validate the strength specifications of the several orbit corrector magnets involved, including a budget reserved for the correction of the orbit distortions from various sources.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY036
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY037	HLLHCV1.1 Optics Version for the HL-LHC Upgrade	2090
	R. De Maria, S.D. Fartoukh, M. Fitterer CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. The optics and layout of the HL-LHC are evolving as the new hardware is being studied and integrated, any additional requirements from the experiments detailed, and other constraints of different nature clarified. Here we present the changes of version 1.1 of the optics and layout with respect to the previous version 1.0, which include the current hardware choices and an outlook on the main resulting optics limitations and the possible future evolutions of the layout.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY038	BPM Tolerances for HL-LHC Orbit Correction in the Inner Triplet Area	2094
	M. Fitterer, R. De Maria CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. For the HL-LHC beam spot sizes as small as 7 mum are considered for the high luminosity insertions IR1 and IR5. In addition, the luminosity has to be levelled over several hours by changing β^* resulting in constant changes of the optics and thus orbit changes. The small beam size and the continuous optics changes in general make the alignment of the beams at the IP challenging. In order to avoid continuous luminosity scans for the alignment of the beams at the IP, the orbit correction has to rely on the readings of the BPMs in the IT region. In this paper we review the requirements on resolution and accuracy of the BPMs and compare different options for the placement of the BPMs in the IT region.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Dynamics Requirements for the Powering Scheme of the HL-LHC Triplet

2082

M. Fitterer, R. De Maria, S.D. Fartoukh, M. Giovannozzi
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
For the HL-LHC, β^* values as small as 15 cm are envisaged as baseline scenario for the high luminosity insertions IR1 and IR5, thus leading to an increase of the maximum beta-functions in the inner triplet (IT). The larger beta-functions in the IT result in a higher sensitivity of the beam to any linear or non-linear, static or dynamic, field imperfections in the IT region. In this paper, we summarize accordingly the tolerances of the triplet power supplies in terms of current ripple, stability and reproducibility. Both the baseline IT powering scheme and other alternative schemes will be presented, the later reducing the tune shift caused by a current modulation and thus weakening its possible impact on the long term stability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY036

Crossing Scheme and Orbit Correction in IR1/5 for HL-LHC

2086

M. Fitterer, R. De Maria, S.D. Fartoukh, M. Giovannozzi
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
In this paper we review the orbit correction strategy and crossing scheme adjustment for the HL-LHC orbit correctors in IR1/5 in view of the new optics and layout version HLLHCV1.1. The main objectives are to optimize the crossing scheme, in particular to reduce the strength of the orbit correctors at D2, and to validate the strength specifications of the several orbit corrector magnets involved, including a budget reserved for the correction of the orbit distortions from various sources.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY036

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY037

HLLHCV1.1 Optics Version for the HL-LHC Upgrade

2090

R. De Maria, S.D. Fartoukh, M. Fitterer
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
The optics and layout of the HL-LHC are evolving as the new hardware is being studied and integrated, any additional requirements from the experiments detailed, and other constraints of different nature clarified. Here we present the changes of version 1.1 of the optics and layout with respect to the previous version 1.0, which include the current hardware choices and an outlook on the main resulting optics limitations and the possible future evolutions of the layout.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY038

BPM Tolerances for HL-LHC Orbit Correction in the Inner Triplet Area

2094

M. Fitterer, R. De Maria
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
For the HL-LHC beam spot sizes as small as 7 mum are considered for the high luminosity insertions IR1 and IR5. In addition, the luminosity has to be levelled over several hours by changing β^* resulting in constant changes of the optics and thus orbit changes. The small beam size and the continuous optics changes in general make the alignment of the beams at the IP challenging. In order to avoid continuous luminosity scans for the alignment of the beams at the IP, the orbit correction has to rely on the readings of the BPMs in the IT region. In this paper we review the requirements on resolution and accuracy of the BPMs and compare different options for the placement of the BPMs in the IT region.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)