IPAC2013 - List of Authors (Takatomi, T.)

Paper	Title	Page
MOPFI018	Design Study of a New Large Aperture Flux Concentrator	318
	L. Zang, M. Akemoto, S. Fukuda, K. Furukawa, T. Higo, K. Kakihara, T. Kamitani, Y. Ogawa, H. Someya, T. Takatomi KEK, Ibaraki, Japan
	For high luminosity electron-positron colliders, intense positron beam production is one of the key issues. Flux Concentrator (FC) is a pulsed solenoid that can generate high magnetic field of several Tesla and is often used for focusing positrons emerged from a production target. It works as an optical matching device in a positron capture section. With this device, high capture efficiency is achieved. In this paper, we will introduce a new design of a FC for the SuperKEKB positron source. The advantages of the new design are: 1. the aperture could be doubled of the previous design, 2. the transverse components are only 1/10 of the previous design, 3. maintain the same high peak longitudinal field. The new FC modeling has been done in CST Studio and we will report the results of new FC field evaluation. In order to calculate the positron yield and capture efficiency, a tracking simulation to the end of capture section has also been carried out, which is also included in this paper.

MOPFI024	Ultra-short Electron Bunch Generation by an ECC RF Gun	330
	Y. Koshiba, T. Aoki, M. Mizugaki, K. Sakaue, M. Washio Waseda University, Tokyo, Japan T. Takatomi, J. Urakawa KEK, Ibaraki, Japan
	Funding: Work supported by JSPS Grant-in-Aid for Young Scientists (B) 23740203 and Scientific Research (A) 10001690 Energy Chirping Cell attached rf gun (ECC rf gun) is a photocathode rf gun specialized for ultra-short bunch generation. This ECC rf gun has been made with the collaboration of High Energy Accelerator Research Organization (KEK). Although the bunch length could be controlled by the laser pulse width, the bunch length ends up to be more than 1ps due to space charge effect when using a femto-second laser and a normal 1.6 cell cavity. Concerning this phenomenon, ECC is attached right after the 1.6 cell so that the electron bunch would be compressed after the electron bunch is accelerated around 5MeV. The roll of ECC is to chirp the energy with the linear part of the rf electric field. The electron bunch would be compressed by velocity difference as it drifts. Simulation results from PARMELA and GPT show that ECC rf gun can accelerate an 100pC bunch with the bunch length less than 100fs. We already manufactured this ECC rf gun and installed in our system. We demonstrated the ultra-short bunch by measuring the coherent THz light by synchrotron radiation and transition radiation. In this conference, we will report the results of ultra-short bunch generation experiments, and future plans.

TUPME010	High-intensity and Low-emittance Upgrade of 7-GeV Injector Linac towards SuperKEKB	1583
	K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, H. Honma, R. Ichimiya, N. Iida, M. Ikeda, E. Kadokura, K. Kakihara, T. Kamitani, H. Katagiri, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, T. Mori, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, S. Ohsawa, F. Qiu, M. Satoh, T. Shidara, A. Shirakawa, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou KEK, Ibaraki, Japan D. Satoh TIT, Tokyo, Japan
	After a decade of successful operation at KEKB a new electron/positron collider, SuperKEKB, is being constructed to commission within FY2014. It aims at a luminosity of 8 x 10³⁵ /s.cm², 40-times higher than that of KEKB, in order to study the flavor physics of elementary particles further, by mainly squeezing the beams at the collision point. The injector linac should provide high-intensity and low-emittance beams of 7-GeV electron and 4-GeV positron by newly installing a RF-gun, a flux concentrator, and a damping ring with careful emittance and energy management. It also have to perform simultaneous top-up injections into four storage rings by pulse-to-pulse beam modulations not to interfare between three facilities of SuperKEKB, Photon Factory and PF-AR. This paper describes the injector design decisions and present status of the construction.

WEPFI018	Comparison of High Gradient Performance in Varying Cavity Geometries	2741
	T. Higo, T. Abe, Y. Arakida, Y. Higashi, S. Matsumoto, T. Shidara, T. Takatomi, M. Yamanaka KEK, Ibaraki, Japan A. Grudiev, G. Riddone, W. Wuensch CERN, Geneva, Switzerland
	Four types of CLIC prototype TW accelerator structures were high-gradient tested at Nextef, KEK, up to 100 MV/m level and the fifth is under test now. The ramping speed of each processing and the resultant breakdown rate were compared among them. From this comparison, it was found that the ramping speed of the structures with opening ports for HOM damping with magnetic coupling became slow and the resultant breakdown rate became high. It was also found that that with lower surface magnetic field showed faster ramping in processing and lower breakdown rate. This indicates the role of the magnetic field on vacuum breakdowns in copper structure at the region of several tens to 100 MV/m. In this paper, we review the processing stage and the high gradient performance of these structures trying to discuss the relevant parameters, surface electric field, surface magnetic field and other parameters such as Sc, “complex pointing vector”, to the performance difference.

WEPFI023	Study on Two-cell RF-deflector Cavity for Ultra-short Electron Bunch Measurement	2753
	Y. Nishimura, K. Sakaue, T. Takahashi, M. Washio Waseda University, Tokyo, Japan T. Takatomi, J. Urakawa KEK, Ibaraki, Japan
	Funding: Work supported by JSPS Grant-in-Aid for Scientific Research (A) 10001690 and the Quantum Beam Technology Program of MEXT. We have been developing an S-band Cs-Te photocathode rf electron gun system for pulse radiolysis and laser Compton scattering experiment at Waseda University. These researches demand for high quality and well controlled electron beam. In order to measure the ultra-short electron bunch, we decided to use rf-deflector cavity, which can convert the longitudinal distribution to that of transverse. With this technique, the longitudinal bunch profile can be obtained as the transverse profile. We used the 3D electromagnetic simulation codes HFSS for designing rf deflector cavity and GPT for beam tracking. The cavity has 2 cell structures operating on π mode, standing wave, dipole (TM120) mode at 2856MHz. We have confirmed on HFSS that 2 cell rf-deflector cavity can produce 660G magnetic field per cell on beam line with 750kW input rf power. This field strength is enough for our target, which is 100fs bunch length measurement at 4.3MeV. In this conference, we will present the cavity structure design, the present progresses and future plan.

Paper

Title

Page

Design Study of a New Large Aperture Flux Concentrator

318

L. Zang, M. Akemoto, S. Fukuda, K. Furukawa, T. Higo, K. Kakihara, T. Kamitani, Y. Ogawa, H. Someya, T. Takatomi
KEK, Ibaraki, Japan

For high luminosity electron-positron colliders, intense positron beam production is one of the key issues. Flux Concentrator (FC) is a pulsed solenoid that can generate high magnetic field of several Tesla and is often used for focusing positrons emerged from a production target. It works as an optical matching device in a positron capture section. With this device, high capture efficiency is achieved. In this paper, we will introduce a new design of a FC for the SuperKEKB positron source. The advantages of the new design are: 1. the aperture could be doubled of the previous design, 2. the transverse components are only 1/10 of the previous design, 3. maintain the same high peak longitudinal field. The new FC modeling has been done in CST Studio and we will report the results of new FC field evaluation. In order to calculate the positron yield and capture efficiency, a tracking simulation to the end of capture section has also been carried out, which is also included in this paper.

MOPFI024

Ultra-short Electron Bunch Generation by an ECC RF Gun

330

Y. Koshiba, T. Aoki, M. Mizugaki, K. Sakaue, M. Washio
Waseda University, Tokyo, Japan
T. Takatomi, J. Urakawa
KEK, Ibaraki, Japan

Funding: Work supported by JSPS Grant-in-Aid for Young Scientists (B) 23740203 and Scientific Research (A) 10001690
Energy Chirping Cell attached rf gun (ECC rf gun) is a photocathode rf gun specialized for ultra-short bunch generation. This ECC rf gun has been made with the collaboration of High Energy Accelerator Research Organization (KEK). Although the bunch length could be controlled by the laser pulse width, the bunch length ends up to be more than 1ps due to space charge effect when using a femto-second laser and a normal 1.6 cell cavity. Concerning this phenomenon, ECC is attached right after the 1.6 cell so that the electron bunch would be compressed after the electron bunch is accelerated around 5MeV. The roll of ECC is to chirp the energy with the linear part of the rf electric field. The electron bunch would be compressed by velocity difference as it drifts. Simulation results from PARMELA and GPT show that ECC rf gun can accelerate an 100pC bunch with the bunch length less than 100fs. We already manufactured this ECC rf gun and installed in our system. We demonstrated the ultra-short bunch by measuring the coherent THz light by synchrotron radiation and transition radiation. In this conference, we will report the results of ultra-short bunch generation experiments, and future plans.

TUPME010

High-intensity and Low-emittance Upgrade of 7-GeV Injector Linac towards SuperKEKB

1583

K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, H. Honma, R. Ichimiya, N. Iida, M. Ikeda, E. Kadokura, K. Kakihara, T. Kamitani, H. Katagiri, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, T. Mori, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, S. Ohsawa, F. Qiu, M. Satoh, T. Shidara, A. Shirakawa, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou
KEK, Ibaraki, Japan
D. Satoh
TIT, Tokyo, Japan

After a decade of successful operation at KEKB a new electron/positron collider, SuperKEKB, is being constructed to commission within FY2014. It aims at a luminosity of 8 x 10³⁵ /s.cm², 40-times higher than that of KEKB, in order to study the flavor physics of elementary particles further, by mainly squeezing the beams at the collision point. The injector linac should provide high-intensity and low-emittance beams of 7-GeV electron and 4-GeV positron by newly installing a RF-gun, a flux concentrator, and a damping ring with careful emittance and energy management. It also have to perform simultaneous top-up injections into four storage rings by pulse-to-pulse beam modulations not to interfare between three facilities of SuperKEKB, Photon Factory and PF-AR. This paper describes the injector design decisions and present status of the construction.

WEPFI018

Comparison of High Gradient Performance in Varying Cavity Geometries

2741

T. Higo, T. Abe, Y. Arakida, Y. Higashi, S. Matsumoto, T. Shidara, T. Takatomi, M. Yamanaka
KEK, Ibaraki, Japan
A. Grudiev, G. Riddone, W. Wuensch
CERN, Geneva, Switzerland

Four types of CLIC prototype TW accelerator structures were high-gradient tested at Nextef, KEK, up to 100 MV/m level and the fifth is under test now. The ramping speed of each processing and the resultant breakdown rate were compared among them. From this comparison, it was found that the ramping speed of the structures with opening ports for HOM damping with magnetic coupling became slow and the resultant breakdown rate became high. It was also found that that with lower surface magnetic field showed faster ramping in processing and lower breakdown rate. This indicates the role of the magnetic field on vacuum breakdowns in copper structure at the region of several tens to 100 MV/m. In this paper, we review the processing stage and the high gradient performance of these structures trying to discuss the relevant parameters, surface electric field, surface magnetic field and other parameters such as Sc, “complex pointing vector”, to the performance difference.

WEPFI023

Study on Two-cell RF-deflector Cavity for Ultra-short Electron Bunch Measurement

2753

Y. Nishimura, K. Sakaue, T. Takahashi, M. Washio
Waseda University, Tokyo, Japan
T. Takatomi, J. Urakawa
KEK, Ibaraki, Japan

Funding: Work supported by JSPS Grant-in-Aid for Scientific Research (A) 10001690 and the Quantum Beam Technology Program of MEXT.
We have been developing an S-band Cs-Te photocathode rf electron gun system for pulse radiolysis and laser Compton scattering experiment at Waseda University. These researches demand for high quality and well controlled electron beam. In order to measure the ultra-short electron bunch, we decided to use rf-deflector cavity, which can convert the longitudinal distribution to that of transverse. With this technique, the longitudinal bunch profile can be obtained as the transverse profile. We used the 3D electromagnetic simulation codes HFSS for designing rf deflector cavity and GPT for beam tracking. The cavity has 2 cell structures operating on π mode, standing wave, dipole (TM120) mode at 2856MHz. We have confirmed on HFSS that 2 cell rf-deflector cavity can produce 660G magnetic field per cell on beam line with 750kW input rf power. This field strength is enough for our target, which is 100fs bunch length measurement at 4.3MeV. In this conference, we will present the cavity structure design, the present progresses and future plan.